In cherry projects, we use edptx as the internal display interface
and use dptx as the external display interface. To support this, we
need to add more properties.
- Add pinctrls for edptx and dptx.
- Add ports for edptx and dptx.
The port connections for the internal and external display:
dp-intf0 -> edptx -> panel
dp-intf1 -> dptx
The edptx endpoint is kept empty for now, as the panel addition will
come in a later commit.
Signed-off-by: Bo-Chen Chen <[email protected]>
Reviewed-by: AngeloGioacchino Del Regno <[email protected]>
---
.../boot/dts/mediatek/mt8195-cherry.dtsi | 68 +++++++++++++++++++
1 file changed, 68 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi b/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi
index 303dc32c64dc..560103e29017 100644
--- a/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt8195-cherry.dtsi
@@ -125,6 +125,7 @@
port {
dp_intf0_out: endpoint {
+ remote-endpoint = <&edp_in>;
};
};
};
@@ -134,6 +135,59 @@
port {
dp_intf1_out: endpoint {
+ remote-endpoint = <&dptx_in>;
+ };
+ };
+};
+
+&edp_tx {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&edptx_pins_default>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ edp_in: endpoint {
+ remote-endpoint = <&dp_intf0_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ edp_out: endpoint {
+ data-lanes = <0 1 2 3>;
+ };
+ };
+ };
+};
+
+&dp_tx {
+ status = "okay";
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&dptx_pin>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ port@0 {
+ reg = <0>;
+ dptx_in: endpoint {
+ remote-endpoint = <&dp_intf1_out>;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ dptx_out: endpoint {
+ data-lanes = <0 1 2 3>;
+ };
};
};
};
@@ -497,6 +551,20 @@
};
};
+ edptx_pins_default: edptx-default-pins {
+ pins-cmd-dat {
+ pinmux = <PINMUX_GPIO7__FUNC_EDP_TX_HPD>;
+ bias-pull-up;
+ };
+ };
+
+ dptx_pin: dptx-default-pins {
+ pins-cmd-dat {
+ pinmux = <PINMUX_GPIO18__FUNC_DP_TX_HPD>;
+ bias-pull-up;
+ };
+ };
+
i2c0_pins: i2c0-default-pins {
pins-bus {
pinmux = <PINMUX_GPIO8__FUNC_SDA0>,
--
2.18.0