Arne Wendt writes:
Cheap clone controllers may (falsely) report as having a user
calibration for the analog sticks in place, but return
wrong/impossible values for the actual calibration data.
In the present case at mine, the controller reports having a
user calibration in place and successfully executes the read
commands. The reported user calibration however is
min = center = max = 0.
This pull request addresses problems of this kind by checking the
provided user calibration-data for plausibility (min < center < max)
and falling back to the default values if implausible.
I'll note that I was experiencing a crash because of this bug when using
the GuliKit KingKong 2 controller. The crash manifests as a divide by
zero error in the kernel logs:
kernel: divide error: 0000 [#1] PREEMPT SMP NOPTI
Changes in v2:
- Move the plausibility check to joycon_read_stick_calibration() and
have that function return -EINVAL if the check fails.
- In the plausibility check, change >= to ==. hid_field_extract() never
returns a negative value, so a scenario involving min > center or
center > max is impossible.
- To reduce code duplication, move the code for setting default
calibration values into a single function called
joycon_use_default_calibration().
Changes in v3:
- Unbreak warning string to conform to coding style.
- Change joycon_use_default_calibration() to accept a struct hid_device
pointer instead of a struct joycon_ctlr pointer.
Link: https://github.com/nicman23/dkms-hid-nintendo/pull/25
Link: https://github.com/DanielOgorchock/linux/issues/36
Co-authored-by: Arne Wendt <[email protected]>
Signed-off-by: Johnothan King <[email protected]>
---
drivers/hid/hid-nintendo.c | 55 +++++++++++++++++++++-----------------
1 file changed, 30 insertions(+), 25 deletions(-)
diff --git a/drivers/hid/hid-nintendo.c b/drivers/hid/hid-nintendo.c
index 6028af3c3aae..f25b7b19e9a4 100644
--- a/drivers/hid/hid-nintendo.c
+++ b/drivers/hid/hid-nintendo.c
@@ -760,12 +760,31 @@ static int joycon_read_stick_calibration(struct joycon_ctlr *ctlr, u16 cal_addr,
cal_y->max = cal_y->center + y_max_above;
cal_y->min = cal_y->center - y_min_below;
- return 0;
+ /* check if values are plausible */
+ if (cal_x->min == cal_x->center || cal_x->center == cal_x->max ||
+ cal_y->min == cal_y->center || cal_y->center == cal_y->max)
+ ret = -EINVAL;
+
+ return ret;
}
static const u16 DFLT_STICK_CAL_CEN = 2000;
static const u16 DFLT_STICK_CAL_MAX = 3500;
static const u16 DFLT_STICK_CAL_MIN = 500;
+static void joycon_use_default_calibration(struct hid_device *hdev,
+ struct joycon_stick_cal *cal_x,
+ struct joycon_stick_cal *cal_y,
+ const char *stick, int ret)
+{
+ hid_warn(hdev,
+ "Failed to read %s stick cal, using defaults; e=%d\n", stick,
+ ret);
+
+ cal_x->center = cal_y->center = DFLT_STICK_CAL_CEN;
+ cal_x->max = cal_y->max = DFLT_STICK_CAL_MAX;
+ cal_x->min = cal_y->min = DFLT_STICK_CAL_MIN;
+}
+
static int joycon_request_calibration(struct joycon_ctlr *ctlr)
{
u16 left_stick_addr = JC_CAL_FCT_DATA_LEFT_ADDR;
@@ -793,38 +812,24 @@ static int joycon_request_calibration(struct joycon_ctlr *ctlr)
&ctlr->left_stick_cal_x,
&ctlr->left_stick_cal_y,
true);
- if (ret) {
- hid_warn(ctlr->hdev,
- "Failed to read left stick cal, using dflts; e=%d\n",
- ret);
-
- ctlr->left_stick_cal_x.center = DFLT_STICK_CAL_CEN;
- ctlr->left_stick_cal_x.max = DFLT_STICK_CAL_MAX;
- ctlr->left_stick_cal_x.min = DFLT_STICK_CAL_MIN;
- ctlr->left_stick_cal_y.center = DFLT_STICK_CAL_CEN;
- ctlr->left_stick_cal_y.max = DFLT_STICK_CAL_MAX;
- ctlr->left_stick_cal_y.min = DFLT_STICK_CAL_MIN;
- }
+ if (ret)
+ joycon_use_default_calibration(ctlr->hdev,
+ &ctlr->left_stick_cal_x,
+ &ctlr->left_stick_cal_y,
+ "left", ret);
/* read the right stick calibration data */
ret = joycon_read_stick_calibration(ctlr, right_stick_addr,
&ctlr->right_stick_cal_x,
&ctlr->right_stick_cal_y,
false);
- if (ret) {
- hid_warn(ctlr->hdev,
- "Failed to read right stick cal, using dflts; e=%d\n",
- ret);
-
- ctlr->right_stick_cal_x.center = DFLT_STICK_CAL_CEN;
- ctlr->right_stick_cal_x.max = DFLT_STICK_CAL_MAX;
- ctlr->right_stick_cal_x.min = DFLT_STICK_CAL_MIN;
- ctlr->right_stick_cal_y.center = DFLT_STICK_CAL_CEN;
- ctlr->right_stick_cal_y.max = DFLT_STICK_CAL_MAX;
- ctlr->right_stick_cal_y.min = DFLT_STICK_CAL_MIN;
- }
+ if (ret)
+ joycon_use_default_calibration(ctlr->hdev,
+ &ctlr->right_stick_cal_x,
+ &ctlr->right_stick_cal_y,
+ "right", ret);
hid_dbg(ctlr->hdev, "calibration:\n"
"l_x_c=%d l_x_max=%d l_x_min=%d\n"
--
2.37.3
Hi Johnothan,
On Sep 21 2022, Johnothan King wrote:
> Arne Wendt writes:
> Cheap clone controllers may (falsely) report as having a user
> calibration for the analog sticks in place, but return
> wrong/impossible values for the actual calibration data.
> In the present case at mine, the controller reports having a
> user calibration in place and successfully executes the read
> commands. The reported user calibration however is
> min = center = max = 0.
>
> This pull request addresses problems of this kind by checking the
> provided user calibration-data for plausibility (min < center < max)
> and falling back to the default values if implausible.
>
> I'll note that I was experiencing a crash because of this bug when using
> the GuliKit KingKong 2 controller. The crash manifests as a divide by
> zero error in the kernel logs:
> kernel: divide error: 0000 [#1] PREEMPT SMP NOPTI
>
> Changes in v2:
> - Move the plausibility check to joycon_read_stick_calibration() and
> have that function return -EINVAL if the check fails.
> - In the plausibility check, change >= to ==. hid_field_extract() never
> returns a negative value, so a scenario involving min > center or
> center > max is impossible.
I am not so sure this is a great idea. I agree this is correct, but it
definitely requires some processing from my brain and double
verifications in the code that this is correct.
The problem is that all of the values are declared as s32.
hid_field_extract() returns a u32, yes, but I haven't checked the report
descriptor if that value can be a negative one. What needs to be done,
if the logical min value is negative is that we should call hid_snto32()
to convert into a proper s32 (I doubt you have to do it but I am putting
it here for completeness).
So basically, you are blindly converting a u32 into a s32 and do not
take rollover into account.
Given that this function is only called at probe time where timing is
not the biggest of our concerns, I would simply leave the more human
friendy with obvious failures cases with >= and <=.
Second note: please move all "Changes in v*" below the first '---' and
before the file stats. This way they will be stripped out when applying
the patch. People who want to see the changes can always follow the lore
link that should be applied to the commit when this patch gets applied.
> - To reduce code duplication, move the code for setting default
> calibration values into a single function called
> joycon_use_default_calibration().
>
> Changes in v3:
> - Unbreak warning string to conform to coding style.
> - Change joycon_use_default_calibration() to accept a struct hid_device
> pointer instead of a struct joycon_ctlr pointer.
>
> Link: https://github.com/nicman23/dkms-hid-nintendo/pull/25
> Link: https://github.com/DanielOgorchock/linux/issues/36
> Co-authored-by: Arne Wendt <[email protected]>
> Signed-off-by: Johnothan King <[email protected]>
> ---
> drivers/hid/hid-nintendo.c | 55 +++++++++++++++++++++-----------------
> 1 file changed, 30 insertions(+), 25 deletions(-)
>
> diff --git a/drivers/hid/hid-nintendo.c b/drivers/hid/hid-nintendo.c
> index 6028af3c3aae..f25b7b19e9a4 100644
> --- a/drivers/hid/hid-nintendo.c
> +++ b/drivers/hid/hid-nintendo.c
> @@ -760,12 +760,31 @@ static int joycon_read_stick_calibration(struct joycon_ctlr *ctlr, u16 cal_addr,
> cal_y->max = cal_y->center + y_max_above;
> cal_y->min = cal_y->center - y_min_below;
>
> - return 0;
> + /* check if values are plausible */
> + if (cal_x->min == cal_x->center || cal_x->center == cal_x->max ||
> + cal_y->min == cal_y->center || cal_y->center == cal_y->max)
> + ret = -EINVAL;
> +
> + return ret;
> }
>
> static const u16 DFLT_STICK_CAL_CEN = 2000;
> static const u16 DFLT_STICK_CAL_MAX = 3500;
> static const u16 DFLT_STICK_CAL_MIN = 500;
> +static void joycon_use_default_calibration(struct hid_device *hdev,
> + struct joycon_stick_cal *cal_x,
> + struct joycon_stick_cal *cal_y,
> + const char *stick, int ret)
> +{
> + hid_warn(hdev,
> + "Failed to read %s stick cal, using defaults; e=%d\n", stick,
> + ret);
nitpick: why not putting the format string on the line above and leave
"stick" and "ret in the second line? It should be OK for checkpatch and
will be less weird to have "ret" on its line all by itself.
> +
> + cal_x->center = cal_y->center = DFLT_STICK_CAL_CEN;
> + cal_x->max = cal_y->max = DFLT_STICK_CAL_MAX;
> + cal_x->min = cal_y->min = DFLT_STICK_CAL_MIN;
> +}
> +
> static int joycon_request_calibration(struct joycon_ctlr *ctlr)
> {
> u16 left_stick_addr = JC_CAL_FCT_DATA_LEFT_ADDR;
> @@ -793,38 +812,24 @@ static int joycon_request_calibration(struct joycon_ctlr *ctlr)
> &ctlr->left_stick_cal_x,
> &ctlr->left_stick_cal_y,
> true);
> - if (ret) {
> - hid_warn(ctlr->hdev,
> - "Failed to read left stick cal, using dflts; e=%d\n",
> - ret);
> -
> - ctlr->left_stick_cal_x.center = DFLT_STICK_CAL_CEN;
> - ctlr->left_stick_cal_x.max = DFLT_STICK_CAL_MAX;
> - ctlr->left_stick_cal_x.min = DFLT_STICK_CAL_MIN;
>
> - ctlr->left_stick_cal_y.center = DFLT_STICK_CAL_CEN;
> - ctlr->left_stick_cal_y.max = DFLT_STICK_CAL_MAX;
> - ctlr->left_stick_cal_y.min = DFLT_STICK_CAL_MIN;
> - }
> + if (ret)
> + joycon_use_default_calibration(ctlr->hdev,
> + &ctlr->left_stick_cal_x,
> + &ctlr->left_stick_cal_y,
> + "left", ret);
>
> /* read the right stick calibration data */
> ret = joycon_read_stick_calibration(ctlr, right_stick_addr,
> &ctlr->right_stick_cal_x,
> &ctlr->right_stick_cal_y,
> false);
> - if (ret) {
> - hid_warn(ctlr->hdev,
> - "Failed to read right stick cal, using dflts; e=%d\n",
> - ret);
> -
> - ctlr->right_stick_cal_x.center = DFLT_STICK_CAL_CEN;
> - ctlr->right_stick_cal_x.max = DFLT_STICK_CAL_MAX;
> - ctlr->right_stick_cal_x.min = DFLT_STICK_CAL_MIN;
>
> - ctlr->right_stick_cal_y.center = DFLT_STICK_CAL_CEN;
> - ctlr->right_stick_cal_y.max = DFLT_STICK_CAL_MAX;
> - ctlr->right_stick_cal_y.min = DFLT_STICK_CAL_MIN;
> - }
> + if (ret)
> + joycon_use_default_calibration(ctlr->hdev,
> + &ctlr->right_stick_cal_x,
> + &ctlr->right_stick_cal_y,
> + "right", ret);
>
> hid_dbg(ctlr->hdev, "calibration:\n"
> "l_x_c=%d l_x_max=%d l_x_min=%d\n"
> --
> 2.37.3
>
>
Cheers,
Benjamin
For my v4 patch I'll just change the check back to using >=. The
signedness of the min, max and center values will probably need some
sort of fix, but that's out of the scope of this patch.
- Johnothan King
------- Original Message -------
On Wednesday, September 21st, 2022 at 1:34 AM, Benjamin Tissoires <[email protected]> wrote:
> Hi Johnothan,
>
> On Sep 21 2022, Johnothan King wrote:
>
> > Arne Wendt writes:
> > Cheap clone controllers may (falsely) report as having a user
> > calibration for the analog sticks in place, but return
> > wrong/impossible values for the actual calibration data.
> > In the present case at mine, the controller reports having a
> > user calibration in place and successfully executes the read
> > commands. The reported user calibration however is
> > min = center = max = 0.
> >
> > This pull request addresses problems of this kind by checking the
> > provided user calibration-data for plausibility (min < center < max)
> > and falling back to the default values if implausible.
> >
> > I'll note that I was experiencing a crash because of this bug when using
> > the GuliKit KingKong 2 controller. The crash manifests as a divide by
> > zero error in the kernel logs:
> > kernel: divide error: 0000 [#1] PREEMPT SMP NOPTI
> >
> > Changes in v2:
> > - Move the plausibility check to joycon_read_stick_calibration() and
> > have that function return -EINVAL if the check fails.
> > - In the plausibility check, change >= to ==. hid_field_extract() never
> > returns a negative value, so a scenario involving min > center or
> > center > max is impossible.
>
>
> I am not so sure this is a great idea. I agree this is correct, but it
> definitely requires some processing from my brain and double
> verifications in the code that this is correct.
>
> The problem is that all of the values are declared as s32.
> hid_field_extract() returns a u32, yes, but I haven't checked the report
> descriptor if that value can be a negative one. What needs to be done,
> if the logical min value is negative is that we should call hid_snto32()
> to convert into a proper s32 (I doubt you have to do it but I am putting
> it here for completeness).
>
> So basically, you are blindly converting a u32 into a s32 and do not
> take rollover into account.
>
> Given that this function is only called at probe time where timing is
> not the biggest of our concerns, I would simply leave the more human
> friendy with obvious failures cases with >= and <=.
>
>
>
> Second note: please move all "Changes in v*" below the first '---' and
> before the file stats. This way they will be stripped out when applying
> the patch. People who want to see the changes can always follow the lore
> link that should be applied to the commit when this patch gets applied.
>
> > - To reduce code duplication, move the code for setting default
> > calibration values into a single function called
> > joycon_use_default_calibration().
> >
> > Changes in v3:
> > - Unbreak warning string to conform to coding style.
> > - Change joycon_use_default_calibration() to accept a struct hid_device
> > pointer instead of a struct joycon_ctlr pointer.
> >
> > Link: https://github.com/nicman23/dkms-hid-nintendo/pull/25
> > Link: https://github.com/DanielOgorchock/linux/issues/36
> > Co-authored-by: Arne Wendt [email protected]
> > Signed-off-by: Johnothan King [email protected]
> > ---
> > drivers/hid/hid-nintendo.c | 55 +++++++++++++++++++++-----------------
> > 1 file changed, 30 insertions(+), 25 deletions(-)
> >
> > diff --git a/drivers/hid/hid-nintendo.c b/drivers/hid/hid-nintendo.c
> > index 6028af3c3aae..f25b7b19e9a4 100644
> > --- a/drivers/hid/hid-nintendo.c
> > +++ b/drivers/hid/hid-nintendo.c
> > @@ -760,12 +760,31 @@ static int joycon_read_stick_calibration(struct joycon_ctlr *ctlr, u16 cal_addr,
> > cal_y->max = cal_y->center + y_max_above;
> > cal_y->min = cal_y->center - y_min_below;
> >
> > - return 0;
> > + /* check if values are plausible */
> > + if (cal_x->min == cal_x->center || cal_x->center == cal_x->max ||
> > + cal_y->min == cal_y->center || cal_y->center == cal_y->max)
> > + ret = -EINVAL;
> > +
> > + return ret;
> > }
> >
> > static const u16 DFLT_STICK_CAL_CEN = 2000;
> > static const u16 DFLT_STICK_CAL_MAX = 3500;
> > static const u16 DFLT_STICK_CAL_MIN = 500;
> > +static void joycon_use_default_calibration(struct hid_device *hdev,
> > + struct joycon_stick_cal *cal_x,
> > + struct joycon_stick_cal *cal_y,
> > + const char *stick, int ret)
> > +{
> > + hid_warn(hdev,
> > + "Failed to read %s stick cal, using defaults; e=%d\n", stick,
> > + ret);
>
>
> nitpick: why not putting the format string on the line above and leave
> "stick" and "ret in the second line? It should be OK for checkpatch and
> will be less weird to have "ret" on its line all by itself.
>
> > +
> > + cal_x->center = cal_y->center = DFLT_STICK_CAL_CEN;
> > + cal_x->max = cal_y->max = DFLT_STICK_CAL_MAX;
> > + cal_x->min = cal_y->min = DFLT_STICK_CAL_MIN;
> > +}
> > +
> > static int joycon_request_calibration(struct joycon_ctlr *ctlr)
> > {
> > u16 left_stick_addr = JC_CAL_FCT_DATA_LEFT_ADDR;
> > @@ -793,38 +812,24 @@ static int joycon_request_calibration(struct joycon_ctlr *ctlr)
> > &ctlr->left_stick_cal_x,
> > &ctlr->left_stick_cal_y,
> > true);
> > - if (ret) {
> > - hid_warn(ctlr->hdev,
> > - "Failed to read left stick cal, using dflts; e=%d\n",
> > - ret);
> > -
> > - ctlr->left_stick_cal_x.center = DFLT_STICK_CAL_CEN;
> > - ctlr->left_stick_cal_x.max = DFLT_STICK_CAL_MAX;
> > - ctlr->left_stick_cal_x.min = DFLT_STICK_CAL_MIN;
> >
> > - ctlr->left_stick_cal_y.center = DFLT_STICK_CAL_CEN;
> > - ctlr->left_stick_cal_y.max = DFLT_STICK_CAL_MAX;
> > - ctlr->left_stick_cal_y.min = DFLT_STICK_CAL_MIN;
> > - }
> > + if (ret)
> > + joycon_use_default_calibration(ctlr->hdev,
> > + &ctlr->left_stick_cal_x,
> > + &ctlr->left_stick_cal_y,
> > + "left", ret);
> >
> > /* read the right stick calibration data */
> > ret = joycon_read_stick_calibration(ctlr, right_stick_addr,
> > &ctlr->right_stick_cal_x,
> > &ctlr->right_stick_cal_y,
> > false);
> > - if (ret) {
> > - hid_warn(ctlr->hdev,
> > - "Failed to read right stick cal, using dflts; e=%d\n",
> > - ret);
> > -
> > - ctlr->right_stick_cal_x.center = DFLT_STICK_CAL_CEN;
> > - ctlr->right_stick_cal_x.max = DFLT_STICK_CAL_MAX;
> > - ctlr->right_stick_cal_x.min = DFLT_STICK_CAL_MIN;
> >
> > - ctlr->right_stick_cal_y.center = DFLT_STICK_CAL_CEN;
> > - ctlr->right_stick_cal_y.max = DFLT_STICK_CAL_MAX;
> > - ctlr->right_stick_cal_y.min = DFLT_STICK_CAL_MIN;
> > - }
> > + if (ret)
> > + joycon_use_default_calibration(ctlr->hdev,
> > + &ctlr->right_stick_cal_x,
> > + &ctlr->right_stick_cal_y,
> > + "right", ret);
> >
> > hid_dbg(ctlr->hdev, "calibration:\n"
> > "l_x_c=%d l_x_max=%d l_x_min=%d\n"
> > --
> > 2.37.3
>
>
> Cheers,
> Benjamin
On Wed, Sep 21, 2022 at 12:53 PM Johnothan King
<[email protected]> wrote:
>
> For my v4 patch I'll just change the check back to using >=. The
> signedness of the min, max and center values will probably need some
> sort of fix, but that's out of the scope of this patch.
Yeah, no worries. The signedness issue was more a FYI, in case you
ever need signed integers from that function. I hope we won't have the
case here and that we are actually having unsigned integers in the
data.
Cheers,
Benjamin
>
> - Johnothan King
>
> ------- Original Message -------
> On Wednesday, September 21st, 2022 at 1:34 AM, Benjamin Tissoires <[email protected]> wrote:
>
>
> > Hi Johnothan,
> >
> > On Sep 21 2022, Johnothan King wrote:
> >
> > > Arne Wendt writes:
> > > Cheap clone controllers may (falsely) report as having a user
> > > calibration for the analog sticks in place, but return
> > > wrong/impossible values for the actual calibration data.
> > > In the present case at mine, the controller reports having a
> > > user calibration in place and successfully executes the read
> > > commands. The reported user calibration however is
> > > min = center = max = 0.
> > >
> > > This pull request addresses problems of this kind by checking the
> > > provided user calibration-data for plausibility (min < center < max)
> > > and falling back to the default values if implausible.
> > >
> > > I'll note that I was experiencing a crash because of this bug when using
> > > the GuliKit KingKong 2 controller. The crash manifests as a divide by
> > > zero error in the kernel logs:
> > > kernel: divide error: 0000 [#1] PREEMPT SMP NOPTI
> > >
> > > Changes in v2:
> > > - Move the plausibility check to joycon_read_stick_calibration() and
> > > have that function return -EINVAL if the check fails.
> > > - In the plausibility check, change >= to ==. hid_field_extract() never
> > > returns a negative value, so a scenario involving min > center or
> > > center > max is impossible.
> >
> >
> > I am not so sure this is a great idea. I agree this is correct, but it
> > definitely requires some processing from my brain and double
> > verifications in the code that this is correct.
> >
> > The problem is that all of the values are declared as s32.
> > hid_field_extract() returns a u32, yes, but I haven't checked the report
> > descriptor if that value can be a negative one. What needs to be done,
> > if the logical min value is negative is that we should call hid_snto32()
> > to convert into a proper s32 (I doubt you have to do it but I am putting
> > it here for completeness).
> >
> > So basically, you are blindly converting a u32 into a s32 and do not
> > take rollover into account.
> >
> > Given that this function is only called at probe time where timing is
> > not the biggest of our concerns, I would simply leave the more human
> > friendy with obvious failures cases with >= and <=.
> >
> >
> >
> > Second note: please move all "Changes in v*" below the first '---' and
> > before the file stats. This way they will be stripped out when applying
> > the patch. People who want to see the changes can always follow the lore
> > link that should be applied to the commit when this patch gets applied.
> >
> > > - To reduce code duplication, move the code for setting default
> > > calibration values into a single function called
> > > joycon_use_default_calibration().
> > >
> > > Changes in v3:
> > > - Unbreak warning string to conform to coding style.
> > > - Change joycon_use_default_calibration() to accept a struct hid_device
> > > pointer instead of a struct joycon_ctlr pointer.
> > >
> > > Link: https://github.com/nicman23/dkms-hid-nintendo/pull/25
> > > Link: https://github.com/DanielOgorchock/linux/issues/36
> > > Co-authored-by: Arne Wendt [email protected]
> > > Signed-off-by: Johnothan King [email protected]
> > > ---
> > > drivers/hid/hid-nintendo.c | 55 +++++++++++++++++++++-----------------
> > > 1 file changed, 30 insertions(+), 25 deletions(-)
> > >
> > > diff --git a/drivers/hid/hid-nintendo.c b/drivers/hid/hid-nintendo.c
> > > index 6028af3c3aae..f25b7b19e9a4 100644
> > > --- a/drivers/hid/hid-nintendo.c
> > > +++ b/drivers/hid/hid-nintendo.c
> > > @@ -760,12 +760,31 @@ static int joycon_read_stick_calibration(struct joycon_ctlr *ctlr, u16 cal_addr,
> > > cal_y->max = cal_y->center + y_max_above;
> > > cal_y->min = cal_y->center - y_min_below;
> > >
> > > - return 0;
> > > + /* check if values are plausible */
> > > + if (cal_x->min == cal_x->center || cal_x->center == cal_x->max ||
> > > + cal_y->min == cal_y->center || cal_y->center == cal_y->max)
> > > + ret = -EINVAL;
> > > +
> > > + return ret;
> > > }
> > >
> > > static const u16 DFLT_STICK_CAL_CEN = 2000;
> > > static const u16 DFLT_STICK_CAL_MAX = 3500;
> > > static const u16 DFLT_STICK_CAL_MIN = 500;
> > > +static void joycon_use_default_calibration(struct hid_device *hdev,
> > > + struct joycon_stick_cal *cal_x,
> > > + struct joycon_stick_cal *cal_y,
> > > + const char *stick, int ret)
> > > +{
> > > + hid_warn(hdev,
> > > + "Failed to read %s stick cal, using defaults; e=%d\n", stick,
> > > + ret);
> >
> >
> > nitpick: why not putting the format string on the line above and leave
> > "stick" and "ret in the second line? It should be OK for checkpatch and
> > will be less weird to have "ret" on its line all by itself.
> >
> > > +
> > > + cal_x->center = cal_y->center = DFLT_STICK_CAL_CEN;
> > > + cal_x->max = cal_y->max = DFLT_STICK_CAL_MAX;
> > > + cal_x->min = cal_y->min = DFLT_STICK_CAL_MIN;
> > > +}
> > > +
> > > static int joycon_request_calibration(struct joycon_ctlr *ctlr)
> > > {
> > > u16 left_stick_addr = JC_CAL_FCT_DATA_LEFT_ADDR;
> > > @@ -793,38 +812,24 @@ static int joycon_request_calibration(struct joycon_ctlr *ctlr)
> > > &ctlr->left_stick_cal_x,
> > > &ctlr->left_stick_cal_y,
> > > true);
> > > - if (ret) {
> > > - hid_warn(ctlr->hdev,
> > > - "Failed to read left stick cal, using dflts; e=%d\n",
> > > - ret);
> > > -
> > > - ctlr->left_stick_cal_x.center = DFLT_STICK_CAL_CEN;
> > > - ctlr->left_stick_cal_x.max = DFLT_STICK_CAL_MAX;
> > > - ctlr->left_stick_cal_x.min = DFLT_STICK_CAL_MIN;
> > >
> > > - ctlr->left_stick_cal_y.center = DFLT_STICK_CAL_CEN;
> > > - ctlr->left_stick_cal_y.max = DFLT_STICK_CAL_MAX;
> > > - ctlr->left_stick_cal_y.min = DFLT_STICK_CAL_MIN;
> > > - }
> > > + if (ret)
> > > + joycon_use_default_calibration(ctlr->hdev,
> > > + &ctlr->left_stick_cal_x,
> > > + &ctlr->left_stick_cal_y,
> > > + "left", ret);
> > >
> > > /* read the right stick calibration data */
> > > ret = joycon_read_stick_calibration(ctlr, right_stick_addr,
> > > &ctlr->right_stick_cal_x,
> > > &ctlr->right_stick_cal_y,
> > > false);
> > > - if (ret) {
> > > - hid_warn(ctlr->hdev,
> > > - "Failed to read right stick cal, using dflts; e=%d\n",
> > > - ret);
> > > -
> > > - ctlr->right_stick_cal_x.center = DFLT_STICK_CAL_CEN;
> > > - ctlr->right_stick_cal_x.max = DFLT_STICK_CAL_MAX;
> > > - ctlr->right_stick_cal_x.min = DFLT_STICK_CAL_MIN;
> > >
> > > - ctlr->right_stick_cal_y.center = DFLT_STICK_CAL_CEN;
> > > - ctlr->right_stick_cal_y.max = DFLT_STICK_CAL_MAX;
> > > - ctlr->right_stick_cal_y.min = DFLT_STICK_CAL_MIN;
> > > - }
> > > + if (ret)
> > > + joycon_use_default_calibration(ctlr->hdev,
> > > + &ctlr->right_stick_cal_x,
> > > + &ctlr->right_stick_cal_y,
> > > + "right", ret);
> > >
> > > hid_dbg(ctlr->hdev, "calibration:\n"
> > > "l_x_c=%d l_x_max=%d l_x_min=%d\n"
> > > --
> > > 2.37.3
> >
> >
> > Cheers,
> > Benjamin
>