From: Vattipalli Praveen <[email protected]>
Add a basic dts for the Microchip Smart Embedded Vision dev kit.
The SEV kit is an upcoming first party board, featuring an MPFS250T and:
- Dual Sony Camera Sensors (IMX334)
- IEEE 802.11 b/g/n 20MHz (1x1) Wi-Fi
- Bluetooth 5 Low Energy
- 4 GB DDR4 x64
- 2 GB LPDDR4 x32
- 1 GB SPI Flash
- 8 GB eMMC flash & SD card slot (multiplexed)
- HDMI2.0 Video Input/Output
- MIPI DSI Output
- MIPI CSI-2 Input
Link: https://onlinedocs.microchip.com/pr/GUID-404D3738-DC76-46BA-8683-6A77E837C2DD-en-US-1/index.html?GUID-065AEBEE-7B2C-4895-8579-B1D73D797F06
Signed-off-by: Vattipalli Praveen <[email protected]>
Signed-off-by: Conor Dooley <[email protected]>
---
arch/riscv/boot/dts/microchip/Makefile | 1 +
.../dts/microchip/mpfs-sev-kit-fabric.dtsi | 45 ++++++
.../riscv/boot/dts/microchip/mpfs-sev-kit.dts | 145 ++++++++++++++++++
3 files changed, 191 insertions(+)
create mode 100644 arch/riscv/boot/dts/microchip/mpfs-sev-kit-fabric.dtsi
create mode 100644 arch/riscv/boot/dts/microchip/mpfs-sev-kit.dts
diff --git a/arch/riscv/boot/dts/microchip/Makefile b/arch/riscv/boot/dts/microchip/Makefile
index 39aae7b04f1c..f18477b2e86d 100644
--- a/arch/riscv/boot/dts/microchip/Makefile
+++ b/arch/riscv/boot/dts/microchip/Makefile
@@ -1,4 +1,5 @@
# SPDX-License-Identifier: GPL-2.0
dtb-$(CONFIG_SOC_MICROCHIP_POLARFIRE) += mpfs-icicle-kit.dtb
dtb-$(CONFIG_SOC_MICROCHIP_POLARFIRE) += mpfs-polarberry.dtb
+dtb-$(CONFIG_SOC_MICROCHIP_POLARFIRE) += mpfs-sev-kit.dtb
obj-$(CONFIG_BUILTIN_DTB) += $(addsuffix .o, $(dtb-y))
diff --git a/arch/riscv/boot/dts/microchip/mpfs-sev-kit-fabric.dtsi b/arch/riscv/boot/dts/microchip/mpfs-sev-kit-fabric.dtsi
new file mode 100644
index 000000000000..8545baf4d129
--- /dev/null
+++ b/arch/riscv/boot/dts/microchip/mpfs-sev-kit-fabric.dtsi
@@ -0,0 +1,45 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/* Copyright (c) 2022 Microchip Technology Inc */
+
+/ {
+ fabric_clk3: fabric-clk3 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <0>;
+ };
+
+ fabric_clk1: fabric-clk1 {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <125000000>;
+ };
+
+ pcie: pcie@2000000000 {
+ compatible = "microchip,pcie-host-1.0";
+ #address-cells = <0x3>;
+ #interrupt-cells = <0x1>;
+ #size-cells = <0x2>;
+ device_type = "pci";
+ reg = <0x20 0x0 0x0 0x8000000>, <0x0 0x43000000 0x0 0x10000>;
+ reg-names = "cfg", "apb";
+ bus-range = <0x0 0x7f>;
+ interrupt-parent = <&plic>;
+ interrupts = <119>;
+ interrupt-map = <0 0 0 1 &pcie_intc 0>,
+ <0 0 0 2 &pcie_intc 1>,
+ <0 0 0 3 &pcie_intc 2>,
+ <0 0 0 4 &pcie_intc 3>;
+ interrupt-map-mask = <0 0 0 7>;
+ clocks = <&fabric_clk1>, <&fabric_clk1>, <&fabric_clk3>;
+ clock-names = "fic0", "fic1", "fic3";
+ ranges = <0x3000000 0x0 0x8000000 0x20 0x8000000 0x0 0x80000000>;
+ msi-parent = <&pcie>;
+ msi-controller;
+ status = "disabled";
+ pcie_intc: interrupt-controller {
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ interrupt-controller;
+ };
+ };
+};
diff --git a/arch/riscv/boot/dts/microchip/mpfs-sev-kit.dts b/arch/riscv/boot/dts/microchip/mpfs-sev-kit.dts
new file mode 100644
index 000000000000..013cb666c72d
--- /dev/null
+++ b/arch/riscv/boot/dts/microchip/mpfs-sev-kit.dts
@@ -0,0 +1,145 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/* Copyright (c) 2022 Microchip Technology Inc */
+
+/dts-v1/;
+
+#include "mpfs.dtsi"
+#include "mpfs-sev-kit-fabric.dtsi"
+
+/* Clock frequency (in Hz) of the rtcclk */
+#define MTIMER_FREQ 1000000
+
+/ {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ model = "Microchip PolarFire-SoC SEV Kit";
+ compatible = "microchip,mpfs-sev-kit", "microchip,mpfs";
+
+ aliases {
+ ethernet0 = &mac1;
+ serial0 = &mmuart0;
+ serial1 = &mmuart1;
+ serial2 = &mmuart2;
+ serial3 = &mmuart3;
+ serial4 = &mmuart4;
+ };
+
+ chosen {
+ stdout-path = "serial1:115200n8";
+ };
+
+ cpus {
+ timebase-frequency = <MTIMER_FREQ>;
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ fabricbuf0ddrc: buffer@80000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x0 0x80000000 0x0 0x2000000>;
+ };
+
+ fabricbuf1ddrnc: buffer@c4000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x0 0xc4000000 0x0 0x4000000>;
+ };
+
+ fabricbuf2ddrncwcb: buffer@d4000000 {
+ compatible = "shared-dma-pool";
+ reg = <0x0 0xd4000000 0x0 0x4000000>;
+ };
+ };
+
+ ddrc_cache: memory@1000000000 {
+ device_type = "memory";
+ reg = <0x10 0x0 0x0 0x76000000>;
+ };
+};
+
+&i2c0 {
+ status = "okay";
+};
+
+&gpio2 {
+ interrupts = <53>, <53>, <53>, <53>,
+ <53>, <53>, <53>, <53>,
+ <53>, <53>, <53>, <53>,
+ <53>, <53>, <53>, <53>,
+ <53>, <53>, <53>, <53>,
+ <53>, <53>, <53>, <53>,
+ <53>, <53>, <53>, <53>,
+ <53>, <53>, <53>, <53>;
+ status = "okay";
+};
+
+&mac0 {
+ status = "okay";
+ phy-mode = "sgmii";
+ phy-handle = <&phy0>;
+ phy1: ethernet-phy@9 {
+ reg = <9>;
+ };
+ phy0: ethernet-phy@8 {
+ reg = <8>;
+ };
+};
+
+&mac1 {
+ status = "okay";
+ phy-mode = "sgmii";
+ phy-handle = <&phy1>;
+};
+
+&mbox {
+ status = "okay";
+};
+
+&mmc {
+ status = "okay";
+ bus-width = <4>;
+ disable-wp;
+ cap-sd-highspeed;
+ cap-mmc-highspeed;
+ mmc-ddr-1_8v;
+ mmc-hs200-1_8v;
+ sd-uhs-sdr12;
+ sd-uhs-sdr25;
+ sd-uhs-sdr50;
+ sd-uhs-sdr104;
+};
+
+&mmuart1 {
+ status = "okay";
+};
+
+&mmuart2 {
+ status = "okay";
+};
+
+&mmuart3 {
+ status = "okay";
+};
+
+&mmuart4 {
+ status = "okay";
+};
+
+&refclk {
+ clock-frequency = <125000000>;
+};
+
+&rtc {
+ status = "okay";
+};
+
+&syscontroller {
+ status = "okay";
+};
+
+&usb {
+ status = "okay";
+ dr_mode = "otg";
+};
--
2.37.3