From: Kurt Kanzenbach <[email protected]>
Add support for configuring the max SDU per priority and per port. If not
specified, keep the default.
Signed-off-by: Kurt Kanzenbach <[email protected]>
Signed-off-by: Vladimir Oltean <[email protected]>
---
v2->v3: implement TC_QUERY_CAPS for TC_SETUP_QDISC_TAPRIO
drivers/net/dsa/hirschmann/hellcreek.c | 61 +++++++++++++++++++++++++-
drivers/net/dsa/hirschmann/hellcreek.h | 7 +++
2 files changed, 66 insertions(+), 2 deletions(-)
diff --git a/drivers/net/dsa/hirschmann/hellcreek.c b/drivers/net/dsa/hirschmann/hellcreek.c
index ab830c8ac1b0..22e52fe1ffb9 100644
--- a/drivers/net/dsa/hirschmann/hellcreek.c
+++ b/drivers/net/dsa/hirschmann/hellcreek.c
@@ -128,6 +128,16 @@ static void hellcreek_select_prio(struct hellcreek *hellcreek, int prio)
hellcreek_write(hellcreek, val, HR_PSEL);
}
+static void hellcreek_select_port_prio(struct hellcreek *hellcreek, int port,
+ int prio)
+{
+ u16 val = port << HR_PSEL_PTWSEL_SHIFT;
+
+ val |= prio << HR_PSEL_PRTCWSEL_SHIFT;
+
+ hellcreek_write(hellcreek, val, HR_PSEL);
+}
+
static void hellcreek_select_counter(struct hellcreek *hellcreek, int counter)
{
u16 val = counter << HR_CSEL_SHIFT;
@@ -1537,6 +1547,45 @@ hellcreek_port_prechangeupper(struct dsa_switch *ds, int port,
return ret;
}
+static void hellcreek_setup_maxsdu(struct hellcreek *hellcreek, int port,
+ const struct tc_taprio_qopt_offload *schedule)
+{
+ int tc;
+
+ for (tc = 0; tc < 8; ++tc) {
+ u32 max_sdu = schedule->max_sdu[tc] + VLAN_ETH_HLEN - ETH_FCS_LEN;
+ u16 val;
+
+ if (!schedule->max_sdu[tc])
+ continue;
+
+ dev_dbg(hellcreek->dev, "Configure max-sdu %u for tc %d on port %d\n",
+ max_sdu, tc, port);
+
+ hellcreek_select_port_prio(hellcreek, port, tc);
+
+ val = (max_sdu & HR_PTPRTCCFG_MAXSDU_MASK) << HR_PTPRTCCFG_MAXSDU_SHIFT;
+
+ hellcreek_write(hellcreek, val, HR_PTPRTCCFG);
+ }
+}
+
+static void hellcreek_reset_maxsdu(struct hellcreek *hellcreek, int port)
+{
+ int tc;
+
+ for (tc = 0; tc < 8; ++tc) {
+ u16 val;
+
+ hellcreek_select_port_prio(hellcreek, port, tc);
+
+ val = (HELLCREEK_DEFAULT_MAX_SDU & HR_PTPRTCCFG_MAXSDU_MASK)
+ << HR_PTPRTCCFG_MAXSDU_SHIFT;
+
+ hellcreek_write(hellcreek, val, HR_PTPRTCCFG);
+ }
+}
+
static void hellcreek_setup_gcl(struct hellcreek *hellcreek, int port,
const struct tc_taprio_qopt_offload *schedule)
{
@@ -1720,7 +1769,10 @@ static int hellcreek_port_set_schedule(struct dsa_switch *ds, int port,
}
hellcreek_port->current_schedule = taprio_offload_get(taprio);
- /* Then select port */
+ /* Configure max sdu */
+ hellcreek_setup_maxsdu(hellcreek, port, hellcreek_port->current_schedule);
+
+ /* Select tdg */
hellcreek_select_tgd(hellcreek, port);
/* Enable gating and keep defaults */
@@ -1772,7 +1824,10 @@ static int hellcreek_port_del_schedule(struct dsa_switch *ds, int port)
hellcreek_port->current_schedule = NULL;
}
- /* Then select port */
+ /* Reset max sdu */
+ hellcreek_reset_maxsdu(hellcreek, port);
+
+ /* Select tgd */
hellcreek_select_tgd(hellcreek, port);
/* Disable gating and return to regular switching flow */
@@ -1828,6 +1883,8 @@ static int hellcreek_port_setup_tc(struct dsa_switch *ds, int port,
struct hellcreek *hellcreek = ds->priv;
switch (type) {
+ case TC_QUERY_CAPS:
+ return hellcreek_tc_query_caps(type_data);
case TC_SETUP_QDISC_TAPRIO: {
struct tc_taprio_qopt_offload *taprio = type_data;
diff --git a/drivers/net/dsa/hirschmann/hellcreek.h b/drivers/net/dsa/hirschmann/hellcreek.h
index 9e303b8ab13c..4a678f7d61ae 100644
--- a/drivers/net/dsa/hirschmann/hellcreek.h
+++ b/drivers/net/dsa/hirschmann/hellcreek.h
@@ -37,6 +37,7 @@
#define HELLCREEK_VLAN_UNTAGGED_MEMBER 0x1
#define HELLCREEK_VLAN_TAGGED_MEMBER 0x3
#define HELLCREEK_NUM_EGRESS_QUEUES 8
+#define HELLCREEK_DEFAULT_MAX_SDU 1536
/* Register definitions */
#define HR_MODID_C (0 * 2)
@@ -72,6 +73,12 @@
#define HR_PRTCCFG_PCP_TC_MAP_SHIFT 0
#define HR_PRTCCFG_PCP_TC_MAP_MASK GENMASK(2, 0)
+#define HR_PTPRTCCFG (0xa9 * 2)
+#define HR_PTPRTCCFG_SET_QTRACK BIT(15)
+#define HR_PTPRTCCFG_REJECT BIT(14)
+#define HR_PTPRTCCFG_MAXSDU_SHIFT 0
+#define HR_PTPRTCCFG_MAXSDU_MASK GENMASK(10, 0)
+
#define HR_CSEL (0x8d * 2)
#define HR_CSEL_SHIFT 0
#define HR_CSEL_MASK GENMASK(7, 0)
--
2.34.1