2022-10-07 13:03:55

by Yassine Oudjana

[permalink] [raw]
Subject: [PATCH v3 00/10] MediaTek pinctrl DT binding cleanup and MT6735 pinctrl support

From: Yassine Oudjana <[email protected]>

This series adds a driver for the pin controller found on the MediaTek MT6735
and MT6735M SoCs. The two differ in the last 6 physical pins, which are used
for MSDC2 on MT6735 but don't exist on MT6735M (since MSDC2 doesn't exist on it
to begin with). In preparation to document DT bindings for this pin controller,
the existing documents for MT67xx SoCs are combined into one in order to
eliminate duplicate property definitions and standardize pin configuration node
names. Necessary cleanup is done along the way.

Changes since v2:
- Add interrupt descriptions.
- Change interrupts property item limits.
- Move pinmux examples from node description to example dts.
- Properly add myself as maintainer for MT6735 pinctrl driver and DT bindings
document.
- Remove tabs from a few defines in pinctrl-mt6735.c.

Changes since v1:
- Combine other documents into existing mediatek,mt6779-pinctrl.yaml
instead of creating a new document with wild card in its name.
- Split first patch into smaller patches focused on specific changes.
- Remove syscon compatible from MT6779 DT to avoid a check error.
- Fix interrupt count for MT6795.

Yassine Oudjana (10):
arm64: dts: mediatek: mt6779: Remove syscon compatible from pin
controller
dt-bindings: pinctrl: mediatek,mt6779-pinctrl: Improve description
dt-bindings: pinctrl: mediatek,mt6779-pinctrl: Make gpio-ranges
optional
dt-bindings: pinctrl: mediatek,mt6779-pinctrl: Add MT6797
dt-bindings: pinctrl: mediatek,pinctrl-mt6795: Fix interrupt count
dt-bindings: pinctrl: mediatek,mt6779-pinctrl: Add MT6795
arm64: dts: mediatek: mt6797: Make pin configuration nodes follow DT
bindings
dt-bindings: pinctrl: mediatek,mt6779-pinctrl: Document MT6765 pin
controller
dt-bindings: pinctrl: mediatek,mt6779-pinctrl: Document MT6735 pin
controller
pinctrl: mediatek: Add MT6735 pinctrl driver

.../pinctrl/mediatek,mt6779-pinctrl.yaml | 254 +-
.../pinctrl/mediatek,mt6797-pinctrl.yaml | 176 -
.../pinctrl/mediatek,pinctrl-mt6795.yaml | 224 -
MAINTAINERS | 10 +-
arch/arm64/boot/dts/mediatek/mt6779.dtsi | 2 +-
arch/arm64/boot/dts/mediatek/mt6797.dtsi | 20 +-
drivers/pinctrl/mediatek/Kconfig | 6 +
drivers/pinctrl/mediatek/Makefile | 1 +
drivers/pinctrl/mediatek/pinctrl-mt6735.c | 584 +++
drivers/pinctrl/mediatek/pinctrl-mtk-mt6735.h | 3993 +++++++++++++++++
10 files changed, 4816 insertions(+), 454 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/pinctrl/mediatek,mt6797-pinctrl.yaml
delete mode 100644 Documentation/devicetree/bindings/pinctrl/mediatek,pinctrl-mt6795.yaml
create mode 100644 drivers/pinctrl/mediatek/pinctrl-mt6735.c
create mode 100644 drivers/pinctrl/mediatek/pinctrl-mtk-mt6735.h

--
2.38.0


2022-10-07 13:03:56

by Yassine Oudjana

[permalink] [raw]
Subject: [PATCH v3 04/10] dt-bindings: pinctrl: mediatek,mt6779-pinctrl: Add MT6797

From: Yassine Oudjana <[email protected]>

Combine MT6797 pin controller document into MT6779 one. reg and
reg-names property constraints are set using conditionals.
A conditional is also used to make interrupt-related properties
required on the MT6779 pin controller only, since the MT6797
controller doesn't support interrupts (or not yet, at least).
drive-strength and slew-rate properties which weren't described
in the MT6779 document before are brought in from the MT6797 one.
Both pin controllers share a common driver core so they should
both support these properties.

Signed-off-by: Yassine Oudjana <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
---
.../pinctrl/mediatek,mt6779-pinctrl.yaml | 87 ++++++---
.../pinctrl/mediatek,mt6797-pinctrl.yaml | 176 ------------------
MAINTAINERS | 2 +-
3 files changed, 67 insertions(+), 198 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/pinctrl/mediatek,mt6797-pinctrl.yaml

diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml
index d45f0e75a698..a2141eb0854e 100644
--- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml
@@ -8,6 +8,7 @@ title: Mediatek MT6779 Pin Controller

maintainers:
- Andy Teng <[email protected]>
+ - Sean Wang <[email protected]>

description:
The MediaTek pin controller on MT6779 is used to control pin
@@ -15,23 +16,14 @@ description:

properties:
compatible:
- const: mediatek,mt6779-pinctrl
+ enum:
+ - mediatek,mt6779-pinctrl
+ - mediatek,mt6797-pinctrl

reg:
- minItems: 9
- maxItems: 9
-
- reg-names:
- items:
- - const: "gpio"
- - const: "iocfg_rm"
- - const: "iocfg_br"
- - const: "iocfg_lm"
- - const: "iocfg_lb"
- - const: "iocfg_rt"
- - const: "iocfg_lt"
- - const: "iocfg_tl"
- - const: "eint"
+ description: Physical addresses for GPIO base(s) and EINT registers.
+
+ reg-names: true

gpio-controller: true

@@ -58,18 +50,65 @@ properties:
"#interrupt-cells":
const: 2

-allOf:
- - $ref: "pinctrl.yaml#"
-
required:
- compatible
- reg
- reg-names
- gpio-controller
- "#gpio-cells"
- - interrupt-controller
- - interrupts
- - "#interrupt-cells"
+
+allOf:
+ - $ref: "pinctrl.yaml#"
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: mediatek,mt6779-pinctrl
+ then:
+ properties:
+ reg:
+ minItems: 9
+ maxItems: 9
+
+ reg-names:
+ items:
+ - const: gpio
+ - const: iocfg_rm
+ - const: iocfg_br
+ - const: iocfg_lm
+ - const: iocfg_lb
+ - const: iocfg_rt
+ - const: iocfg_lt
+ - const: iocfg_tl
+ - const: eint
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: mediatek,mt6797-pinctrl
+ then:
+ properties:
+ reg:
+ minItems: 5
+ maxItems: 5
+
+ reg-names:
+ items:
+ - const: gpio
+ - const: iocfgl
+ - const: iocfgb
+ - const: iocfgr
+ - const: iocfgt
+ - if:
+ properties:
+ reg-names:
+ contains:
+ const: eint
+ then:
+ required:
+ - interrupts
+ - interrupt-controller
+ - "#interrupt-cells"

patternProperties:
'-[0-9]*$':
@@ -111,6 +150,12 @@ patternProperties:

input-schmitt-disable: true

+ drive-strength:
+ enum: [2, 4, 8, 12, 16]
+
+ slew-rate:
+ enum: [0, 1]
+
mediatek,pull-up-adv:
description: |
Pull up setings for 2 pull resistors, R0 and R1. User can
diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt6797-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6797-pinctrl.yaml
deleted file mode 100644
index 637a8386e23e..000000000000
--- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt6797-pinctrl.yaml
+++ /dev/null
@@ -1,176 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/pinctrl/mediatek,mt6797-pinctrl.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Mediatek MT6797 Pin Controller
-
-maintainers:
- - Sean Wang <[email protected]>
-
-description: |+
- The MediaTek's MT6797 Pin controller is used to control SoC pins.
-
-properties:
- compatible:
- const: mediatek,mt6797-pinctrl
-
- reg:
- minItems: 5
- maxItems: 5
-
- reg-names:
- items:
- - const: gpio
- - const: iocfgl
- - const: iocfgb
- - const: iocfgr
- - const: iocfgt
-
- gpio-controller: true
-
- "#gpio-cells":
- const: 2
- description: |
- Number of cells in GPIO specifier. Since the generic GPIO
- binding is used, the amount of cells must be specified as 2. See the below
- mentioned gpio binding representation for description of particular cells.
-
- interrupt-controller: true
-
- interrupts:
- maxItems: 1
-
- "#interrupt-cells":
- const: 2
-
-allOf:
- - $ref: "pinctrl.yaml#"
-
-required:
- - compatible
- - reg
- - reg-names
- - gpio-controller
- - "#gpio-cells"
-
-patternProperties:
- '-[0-9]+$':
- type: object
- additionalProperties: false
- patternProperties:
- 'pins':
- type: object
- additionalProperties: false
- description: |
- A pinctrl node should contain at least one subnodes representing the
- pinctrl groups available on the machine. Each subnode will list the
- pins it needs, and how they should be configured, with regard to muxer
- configuration, pullups, drive strength, input enable/disable and input
- schmitt.
- $ref: "/schemas/pinctrl/pincfg-node.yaml"
-
- properties:
- pinmux:
- description:
- integer array, represents gpio pin number and mux setting.
- Supported pin number and mux varies for different SoCs, and are
- defined as macros in <soc>-pinfunc.h directly.
-
- bias-disable: true
-
- bias-pull-up: true
-
- bias-pull-down: true
-
- input-enable: true
-
- input-disable: true
-
- output-enable: true
-
- output-low: true
-
- output-high: true
-
- input-schmitt-enable: true
-
- input-schmitt-disable: true
-
- drive-strength:
- enum: [2, 4, 8, 12, 16]
-
- slew-rate:
- enum: [0, 1]
-
- mediatek,pull-up-adv:
- description: |
- Pull up setings for 2 pull resistors, R0 and R1. User can
- configure those special pins. Valid arguments are described as below:
- 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled.
- 1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled.
- 2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled.
- 3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled.
- $ref: /schemas/types.yaml#/definitions/uint32
- enum: [0, 1, 2, 3]
-
- mediatek,pull-down-adv:
- description: |
- Pull down settings for 2 pull resistors, R0 and R1. User can
- configure those special pins. Valid arguments are described as below:
- 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled.
- 1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled.
- 2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled.
- 3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled.
- $ref: /schemas/types.yaml#/definitions/uint32
- enum: [0, 1, 2, 3]
-
- mediatek,tdsel:
- description: |
- An integer describing the steps for output level shifter duty
- cycle when asserted (high pulse width adjustment). Valid arguments
- are from 0 to 15.
- $ref: /schemas/types.yaml#/definitions/uint32
-
- mediatek,rdsel:
- description: |
- An integer describing the steps for input level shifter duty cycle
- when asserted (high pulse width adjustment). Valid arguments are
- from 0 to 63.
- $ref: /schemas/types.yaml#/definitions/uint32
-
- required:
- - pinmux
-
-additionalProperties: false
-
-examples:
- - |
- #include <dt-bindings/interrupt-controller/irq.h>
- #include <dt-bindings/interrupt-controller/arm-gic.h>
- #include <dt-bindings/pinctrl/mt6797-pinfunc.h>
-
- soc {
- #address-cells = <2>;
- #size-cells = <2>;
-
- pio: pinctrl@10005000 {
- compatible = "mediatek,mt6797-pinctrl";
- reg = <0 0x10005000 0 0x1000>,
- <0 0x10002000 0 0x400>,
- <0 0x10002400 0 0x400>,
- <0 0x10002800 0 0x400>,
- <0 0x10002C00 0 0x400>;
- reg-names = "gpio", "iocfgl", "iocfgb", "iocfgr", "iocfgt";
- gpio-controller;
- #gpio-cells = <2>;
-
- uart_pins_a: uart-0 {
- pins1 {
- pinmux = <MT6797_GPIO232__FUNC_URXD1>,
- <MT6797_GPIO233__FUNC_UTXD1>;
- };
- };
- };
- };
diff --git a/MAINTAINERS b/MAINTAINERS
index 99330a7e4ab2..184519342e45 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -16282,7 +16282,7 @@ M: Sean Wang <[email protected]>
L: [email protected] (moderated for non-subscribers)
S: Maintained
F: Documentation/devicetree/bindings/pinctrl/mediatek,mt65xx-pinctrl.yaml
-F: Documentation/devicetree/bindings/pinctrl/mediatek,mt6797-pinctrl.yaml
+F: Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml
F: Documentation/devicetree/bindings/pinctrl/mediatek,mt7622-pinctrl.yaml
F: Documentation/devicetree/bindings/pinctrl/mediatek,mt8183-pinctrl.yaml
F: drivers/pinctrl/mediatek/
--
2.38.0

2022-10-07 13:04:21

by Yassine Oudjana

[permalink] [raw]
Subject: [PATCH v3 09/10] dt-bindings: pinctrl: mediatek,mt6779-pinctrl: Document MT6735 pin controller

From: Yassine Oudjana <[email protected]>

Add bindings for the pin controller found on MediaTek MT6735 and
MT6735M SoCs, including describing a method to manually specify
a pin and function in the pinmux property making defining bindings
for each pin/function combination unnecessary. The pin controllers
on those SoCs are generally identical, with the only difference
being the lack of MSDC2 pins (198-203) on MT6735M.

Signed-off-by: Yassine Oudjana <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
---
.../pinctrl/mediatek,mt6779-pinctrl.yaml | 46 ++++++++++++++++++-
MAINTAINERS | 6 +++
2 files changed, 51 insertions(+), 1 deletion(-)

diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml
index 71a9aae2cc8c..7b120803a1a5 100644
--- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml
@@ -10,6 +10,7 @@ maintainers:
- Andy Teng <[email protected]>
- AngeloGioacchino Del Regno <[email protected]>
- Sean Wang <[email protected]>
+ - Yassine Oudjana <[email protected]>

description:
The MediaTek pin controller on MT6779 is used to control pin
@@ -18,6 +19,8 @@ description:
properties:
compatible:
enum:
+ - mediatek,mt6735-pinctrl
+ - mediatek,mt6735m-pinctrl
- mediatek,mt6765-pinctrl
- mediatek,mt6779-pinctrl
- mediatek,mt6795-pinctrl
@@ -63,6 +66,33 @@ required:

allOf:
- $ref: "pinctrl.yaml#"
+ - if:
+ properties:
+ compatible:
+ contains:
+ enum:
+ - mediatek,mt6735-pinctrl
+ - mediatek,mt6735m-pinctrl
+ then:
+ properties:
+ reg:
+ minItems: 8
+ maxItems: 8
+
+ reg-names:
+ items:
+ - const: gpio
+ - const: iocfg0
+ - const: iocfg1
+ - const: iocfg2
+ - const: iocfg3
+ - const: iocfg4
+ - const: iocfg5
+ - const: eint
+
+ interrupts:
+ items:
+ - description: EINT interrupt
- if:
properties:
compatible:
@@ -312,18 +342,32 @@ examples:
};

/* GPIO0 set as multifunction GPIO0 */
- gpio-pins {
+ gpio0-pins {
pins {
pinmux = <PINMUX_GPIO0__FUNC_GPIO0>;
};
};

+ /* GPIO1 set to function 0 (GPIO) */
+ gpio1-pins {
+ pins {
+ pinmux = <(MTK_PIN_NO(1) | 0)>;
+ };
+ };
+
/* GPIO52 set as multifunction SDA0 */
i2c0-pins {
pins {
pinmux = <PINMUX_GPIO52__FUNC_SDA0>;
};
};
+
+ /* GPIO62 set to function 1 (primary function) */
+ i2c1-pins {
+ pins {
+ pinmux = <(MTK_PIN_NO(62) | 1)>;
+ };
+ };
};

mmc0 {
diff --git a/MAINTAINERS b/MAINTAINERS
index 184519342e45..edcb30842ddf 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -16287,6 +16287,12 @@ F: Documentation/devicetree/bindings/pinctrl/mediatek,mt7622-pinctrl.yaml
F: Documentation/devicetree/bindings/pinctrl/mediatek,mt8183-pinctrl.yaml
F: drivers/pinctrl/mediatek/

+PIN CONTROLLER - MEDIATEK MT6735
+M: Yassine Oudjana <[email protected]>
+L: [email protected] (moderated for non-subscribers)
+S: Maintained
+F: Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml
+
PIN CONTROLLER - MICROCHIP AT91
M: Ludovic Desroches <[email protected]>
L: [email protected] (moderated for non-subscribers)
--
2.38.0

2022-10-07 13:20:19

by Yassine Oudjana

[permalink] [raw]
Subject: [PATCH v3 08/10] dt-bindings: pinctrl: mediatek,mt6779-pinctrl: Document MT6765 pin controller

From: Yassine Oudjana <[email protected]>

The MT6765 pin controller has had a driver for a while, but DT
bindings were never documented for it.

Signed-off-by: Yassine Oudjana <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
---
.../pinctrl/mediatek,mt6779-pinctrl.yaml | 23 +++++++++++++++++++
1 file changed, 23 insertions(+)

diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml
index cada3530dd0a..71a9aae2cc8c 100644
--- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml
@@ -18,6 +18,7 @@ description:
properties:
compatible:
enum:
+ - mediatek,mt6765-pinctrl
- mediatek,mt6779-pinctrl
- mediatek,mt6795-pinctrl
- mediatek,mt6797-pinctrl
@@ -62,6 +63,28 @@ required:

allOf:
- $ref: "pinctrl.yaml#"
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: mediatek,mt6765-pinctrl
+ then:
+ properties:
+ reg:
+ minItems: 9
+ maxItems: 9
+
+ reg-names:
+ items:
+ - const: iocfg0
+ - const: iocfg1
+ - const: iocfg2
+ - const: iocfg3
+ - const: iocfg4
+ - const: iocfg5
+ - const: iocfg6
+ - const: iocfg7
+ - const: eint
- if:
properties:
compatible:
--
2.38.0

2022-10-07 13:36:17

by Yassine Oudjana

[permalink] [raw]
Subject: [PATCH v3 07/10] arm64: dts: mediatek: mt6797: Make pin configuration nodes follow DT bindings

From: Yassine Oudjana <[email protected]>

Add -pins suffix to pin configuration nodes to follow DT bindings
and pass dtbs_check.

Signed-off-by: Yassine Oudjana <[email protected]>
---
arch/arm64/boot/dts/mediatek/mt6797.dtsi | 20 ++++++++++----------
1 file changed, 10 insertions(+), 10 deletions(-)

diff --git a/arch/arm64/boot/dts/mediatek/mt6797.dtsi b/arch/arm64/boot/dts/mediatek/mt6797.dtsi
index 15616231022a..0c2b477184ae 100644
--- a/arch/arm64/boot/dts/mediatek/mt6797.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt6797.dtsi
@@ -135,70 +135,70 @@ pio: pinctrl@10005000 {
gpio-controller;
#gpio-cells = <2>;

- uart0_pins_a: uart0 {
+ uart0_pins_a: uart0-pins {
pins0 {
pinmux = <MT6797_GPIO234__FUNC_UTXD0>,
<MT6797_GPIO235__FUNC_URXD0>;
};
};

- uart1_pins_a: uart1 {
+ uart1_pins_a: uart1-pins {
pins1 {
pinmux = <MT6797_GPIO232__FUNC_URXD1>,
<MT6797_GPIO233__FUNC_UTXD1>;
};
};

- i2c0_pins_a: i2c0 {
+ i2c0_pins_a: i2c0-pins {
pins0 {
pinmux = <MT6797_GPIO37__FUNC_SCL0_0>,
<MT6797_GPIO38__FUNC_SDA0_0>;
};
};

- i2c1_pins_a: i2c1 {
+ i2c1_pins_a: i2c1-pins {
pins1 {
pinmux = <MT6797_GPIO55__FUNC_SCL1_0>,
<MT6797_GPIO56__FUNC_SDA1_0>;
};
};

- i2c2_pins_a: i2c2 {
+ i2c2_pins_a: i2c2-pins {
pins2 {
pinmux = <MT6797_GPIO96__FUNC_SCL2_0>,
<MT6797_GPIO95__FUNC_SDA2_0>;
};
};

- i2c3_pins_a: i2c3 {
+ i2c3_pins_a: i2c3-pins {
pins3 {
pinmux = <MT6797_GPIO75__FUNC_SDA3_0>,
<MT6797_GPIO74__FUNC_SCL3_0>;
};
};

- i2c4_pins_a: i2c4 {
+ i2c4_pins_a: i2c4-pins {
pins4 {
pinmux = <MT6797_GPIO238__FUNC_SDA4_0>,
<MT6797_GPIO239__FUNC_SCL4_0>;
};
};

- i2c5_pins_a: i2c5 {
+ i2c5_pins_a: i2c5-pins {
pins5 {
pinmux = <MT6797_GPIO240__FUNC_SDA5_0>,
<MT6797_GPIO241__FUNC_SCL5_0>;
};
};

- i2c6_pins_a: i2c6 {
+ i2c6_pins_a: i2c6-pins {
pins6 {
pinmux = <MT6797_GPIO152__FUNC_SDA6_0>,
<MT6797_GPIO151__FUNC_SCL6_0>;
};
};

- i2c7_pins_a: i2c7 {
+ i2c7_pins_a: i2c7-pins {
pins7 {
pinmux = <MT6797_GPIO154__FUNC_SDA7_0>,
<MT6797_GPIO153__FUNC_SCL7_0>;
--
2.38.0

2022-10-07 13:38:52

by Yassine Oudjana

[permalink] [raw]
Subject: [PATCH v3 10/10] pinctrl: mediatek: Add MT6735 pinctrl driver

From: Yassine Oudjana <[email protected]>

Add a driver for the MediaTek MT6735 SoC pin controller. This driver
also supports the pin controller on MT6735M, which lacks 6 physical
pins (198-203) used for MSDC2 on MT6735.

Signed-off-by: Yassine Oudjana <[email protected]>
---
MAINTAINERS | 2 +
drivers/pinctrl/mediatek/Kconfig | 6 +
drivers/pinctrl/mediatek/Makefile | 1 +
drivers/pinctrl/mediatek/pinctrl-mt6735.c | 584 +++
drivers/pinctrl/mediatek/pinctrl-mtk-mt6735.h | 3993 +++++++++++++++++
5 files changed, 4586 insertions(+)
create mode 100644 drivers/pinctrl/mediatek/pinctrl-mt6735.c
create mode 100644 drivers/pinctrl/mediatek/pinctrl-mtk-mt6735.h

diff --git a/MAINTAINERS b/MAINTAINERS
index edcb30842ddf..b0b5ddcb1039 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -16292,6 +16292,8 @@ M: Yassine Oudjana <[email protected]>
L: [email protected] (moderated for non-subscribers)
S: Maintained
F: Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml
+F: drivers/pinctrl/mediatek/pinctrl-mt6735.c
+F: drivers/pinctrl/mediatek/pinctrl-mtk-mt6735.h

PIN CONTROLLER - MICROCHIP AT91
M: Ludovic Desroches <[email protected]>
diff --git a/drivers/pinctrl/mediatek/Kconfig b/drivers/pinctrl/mediatek/Kconfig
index fed02c6fea06..63cf89f60986 100644
--- a/drivers/pinctrl/mediatek/Kconfig
+++ b/drivers/pinctrl/mediatek/Kconfig
@@ -87,6 +87,12 @@ config PINCTRL_MT2712
default ARM64 && ARCH_MEDIATEK
select PINCTRL_MTK

+config PINCTRL_MT6735
+ bool "MediaTek MT6735(M) pin control"
+ depends on OF
+ default ARM64 && ARCH_MEDIATEK
+ select PINCTRL_MTK_PARIS
+
config PINCTRL_MT6765
tristate "Mediatek MT6765 pin control"
depends on OF
diff --git a/drivers/pinctrl/mediatek/Makefile b/drivers/pinctrl/mediatek/Makefile
index 53265404a39d..104468fac431 100644
--- a/drivers/pinctrl/mediatek/Makefile
+++ b/drivers/pinctrl/mediatek/Makefile
@@ -11,6 +11,7 @@ obj-$(CONFIG_PINCTRL_MT2701) += pinctrl-mt2701.o
obj-$(CONFIG_PINCTRL_MT2712) += pinctrl-mt2712.o
obj-$(CONFIG_PINCTRL_MT8135) += pinctrl-mt8135.o
obj-$(CONFIG_PINCTRL_MT8127) += pinctrl-mt8127.o
+obj-$(CONFIG_PINCTRL_MT6735) += pinctrl-mt6735.o
obj-$(CONFIG_PINCTRL_MT6765) += pinctrl-mt6765.o
obj-$(CONFIG_PINCTRL_MT6779) += pinctrl-mt6779.o
obj-$(CONFIG_PINCTRL_MT6795) += pinctrl-mt6795.o
diff --git a/drivers/pinctrl/mediatek/pinctrl-mt6735.c b/drivers/pinctrl/mediatek/pinctrl-mt6735.c
new file mode 100644
index 000000000000..5a2d535a35c9
--- /dev/null
+++ b/drivers/pinctrl/mediatek/pinctrl-mt6735.c
@@ -0,0 +1,584 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2022 Yassine Oudjana <[email protected]>
+ */
+
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+
+#include "pinctrl-mtk-mt6735.h"
+#include "pinctrl-paris.h"
+
+/* Common registers */
+#define GPIO_DIR 0x000
+#define GPIO_DOUT 0x100
+#define GPIO_DIN 0x200
+#define GPIO_MODE1 0x300
+#define GPIO_MODE2 0x310
+#define GPIO_MODE3 0x320
+#define GPIO_MODE4 0x330
+#define GPIO_MODE5 0x340
+#define GPIO_MODE6 0x350
+#define GPIO_MODE7 0x360
+#define GPIO_MODE8 0x370
+#define GPIO_MODE9 0x380
+#define GPIO_MODE10 0x390
+#define GPIO_MODE11 0x3a0
+#define GPIO_MODE12 0x3b0
+#define GPIO_MODE13 0x3c0
+#define GPIO_MODE14 0x3d0
+#define GPIO_MODE15 0x3e0
+#define GPIO_MODE16 0x3f0
+#define GPIO_MODE17 0x400
+#define GPIO_MODE18 0x410
+#define GPIO_MODE19 0x420
+#define GPIO_MODE20 0x430
+#define GPIO_MODE21 0x440
+
+/* Pin group registers */
+#define GPIO_IES 0x000
+#define GPIO_SMT 0x010
+#define GPIO_TDSEL0 0x020
+#define GPIO_TDSEL1 0x024
+#define GPIO_RDSEL0 0x028
+#define GPIO_RDSEL1 0x02c
+#define GPIO_PULLEN0 0x030
+#define GPIO_PULLEN1 0x040
+#define GPIO_PULLSEL0 0x050
+#define GPIO_PULLSEL1 0x060
+#define GPIO_DRV0 0x070
+#define GPIO_DRV1 0x074
+#define GPIO_PUPD0 0x080
+#define GPIO_PUPD1 0x090
+
+#define PIN_FIELD_BASE(_s_pin, _e_pin, _i_base, _s_addr, _x_addrs, _s_bit, _x_bits) \
+ PIN_FIELD_CALC(_s_pin, _e_pin, _i_base, _s_addr, _x_addrs, _s_bit, \
+ _x_bits, 32, 0)
+
+#define PINS_FIELD_BASE(_s_pin, _e_pin, _i_base, _s_addr, _x_addrs, _s_bit, _x_bits) \
+ PIN_FIELD_CALC(_s_pin, _e_pin, _i_base, _s_addr, _x_addrs, _s_bit, \
+ _x_bits, 32, 1)
+
+static const struct mtk_pin_field_calc mt6735_pin_dir_range[] = {
+ PIN_FIELD(0, 203, GPIO_DIR, 0x10, 0, 1)
+};
+
+static const struct mtk_pin_field_calc mt6735_pin_di_range[] = {
+ PIN_FIELD(0, 203, GPIO_DIN, 0x10, 0, 1)
+};
+
+static const struct mtk_pin_field_calc mt6735_pin_do_range[] = {
+ PIN_FIELD(0, 203, GPIO_DOUT, 0x10, 0, 1)
+};
+
+static const struct mtk_pin_field_calc mt6735_pin_mode_range[] = {
+ PIN_FIELD(0, 4, GPIO_MODE1, 0x10, 0, 3),
+ PIN_FIELD(5, 9, GPIO_MODE1, 0x10, 16, 3),
+ PIN_FIELD(10, 14, GPIO_MODE2, 0x10, 0, 3),
+ PIN_FIELD(15, 19, GPIO_MODE2, 0x10, 16, 3),
+ PIN_FIELD(20, 24, GPIO_MODE3, 0x10, 0, 3),
+ PIN_FIELD(25, 29, GPIO_MODE3, 0x10, 16, 3),
+ PIN_FIELD(30, 34, GPIO_MODE4, 0x10, 0, 3),
+ PIN_FIELD(35, 39, GPIO_MODE4, 0x10, 16, 3),
+ PIN_FIELD(40, 44, GPIO_MODE5, 0x10, 0, 3),
+ PIN_FIELD(45, 49, GPIO_MODE5, 0x10, 16, 3),
+ PIN_FIELD(50, 54, GPIO_MODE6, 0x10, 0, 3),
+ PIN_FIELD(55, 59, GPIO_MODE6, 0x10, 16, 3),
+ PIN_FIELD(60, 64, GPIO_MODE7, 0x10, 0, 3),
+ PIN_FIELD(65, 69, GPIO_MODE7, 0x10, 16, 3),
+ PIN_FIELD(70, 74, GPIO_MODE8, 0x10, 0, 3),
+ PIN_FIELD(75, 79, GPIO_MODE8, 0x10, 16, 3),
+ PIN_FIELD(80, 84, GPIO_MODE9, 0x10, 0, 3),
+ PIN_FIELD(85, 89, GPIO_MODE9, 0x10, 16, 3),
+ PIN_FIELD(90, 94, GPIO_MODE10, 0x10, 0, 3),
+ PIN_FIELD(95, 99, GPIO_MODE10, 0x10, 16, 3),
+ PIN_FIELD(100, 104, GPIO_MODE11, 0x10, 0, 3),
+ PIN_FIELD(105, 109, GPIO_MODE11, 0x10, 16, 3),
+ PIN_FIELD(110, 114, GPIO_MODE12, 0x10, 0, 3),
+ PIN_FIELD(115, 119, GPIO_MODE12, 0x10, 16, 3),
+ PIN_FIELD(120, 124, GPIO_MODE13, 0x10, 0, 3),
+ PIN_FIELD(125, 129, GPIO_MODE13, 0x10, 16, 3),
+ PIN_FIELD(130, 134, GPIO_MODE14, 0x10, 0, 3),
+ PIN_FIELD(135, 139, GPIO_MODE14, 0x10, 16, 3),
+ PIN_FIELD(140, 144, GPIO_MODE15, 0x10, 0, 3),
+ PIN_FIELD(145, 149, GPIO_MODE15, 0x10, 16, 3),
+ PIN_FIELD(150, 154, GPIO_MODE16, 0x10, 0, 3),
+ PIN_FIELD(155, 159, GPIO_MODE16, 0x10, 16, 3),
+ PIN_FIELD(160, 164, GPIO_MODE17, 0x10, 0, 3),
+ PIN_FIELD(165, 169, GPIO_MODE17, 0x10, 16, 3),
+ PIN_FIELD(170, 174, GPIO_MODE18, 0x10, 0, 3),
+ PIN_FIELD(175, 179, GPIO_MODE18, 0x10, 16, 3),
+ PIN_FIELD(180, 184, GPIO_MODE19, 0x10, 0, 3),
+ PIN_FIELD(185, 189, GPIO_MODE19, 0x10, 16, 3),
+ PIN_FIELD(190, 194, GPIO_MODE20, 0x10, 0, 3),
+ PIN_FIELD(195, 199, GPIO_MODE20, 0x10, 16, 3),
+ PIN_FIELD(200, 203, GPIO_MODE21, 0x10, 0, 3),
+};
+
+static const struct mtk_pin_field_calc mt6735_pin_smt_range[] = {
+ PINS_FIELD_BASE(0, 4, 2, GPIO_SMT, 0x10, 10, 1), /* EINT0~4 */
+ PINS_FIELD_BASE(5, 8, 3, GPIO_SMT, 0x10, 3, 1), /* EINT5~8 */
+ PINS_FIELD_BASE(9, 12, 3, GPIO_SMT, 0x10, 6, 1), /* EINT9~12 */
+ PINS_FIELD_BASE(13, 18, 1, GPIO_SMT, 0x10, 0, 1), /* WB_CTRL */
+ PINS_FIELD_BASE(19, 21, 1, GPIO_SMT, 0x10, 1, 1), /* ANTSEL */
+ PINS_FIELD_BASE(42, 44, 2, GPIO_SMT, 0x10, 0, 1), /* CMPDAT */
+ PINS_FIELD_BASE(45, 46, 2, GPIO_SMT, 0x10, 1, 1), /* CMMCLK */
+ PINS_FIELD_BASE(47, 48, 2, GPIO_SMT, 0x10, 2, 1), /* I2C0 */
+ PINS_FIELD_BASE(49, 50, 2, GPIO_SMT, 0x10, 3, 1), /* I2C1 */
+ PINS_FIELD_BASE(51, 52, 2, GPIO_SMT, 0x10, 4, 1), /* I2C2 */
+ PINS_FIELD_BASE(53, 54, 2, GPIO_SMT, 0x10, 5, 1), /* I2C3 */
+ PIN_FIELD_BASE(55, 55, 2, GPIO_SMT, 0x10, 6, 1), /* SRCLKENAI */
+ PIN_FIELD_BASE(56, 56, 2, GPIO_SMT, 0x10, 7, 1), /* SRCLKENA1 */
+ PINS_FIELD_BASE(57, 60, 2, GPIO_SMT, 0x10, 8, 1), /* UART2/3 */
+ PINS_FIELD_BASE(61, 64, 2, GPIO_SMT, 0x10, 9, 1), /* PCM */
+ PINS_FIELD_BASE(65, 68, 3, GPIO_SMT, 0x10, 0, 1), /* SPI */
+ PIN_FIELD_BASE(69, 69, 3, GPIO_SMT, 0x10, 1, 1), /* DISP_PWM */
+ PINS_FIELD_BASE(70, 73, 3, GPIO_SMT, 0x10, 2, 1), /* JTAG */
+ PINS_FIELD_BASE(74, 77, 3, GPIO_SMT, 0x10, 4, 1), /* UART0/1 */
+ PINS_FIELD_BASE(78, 80, 3, GPIO_SMT, 0x10, 5, 1), /* I2S */
+ PINS_FIELD_BASE(81, 86, 3, GPIO_SMT, 0x10, 7, 1), /* KEYPAD */
+ PINS_FIELD_BASE(87, 103, 3, GPIO_SMT, 0x10, 8, 1), /* BPI5~20, C2K_TKBPI */
+ PINS_FIELD_BASE(104, 114, 3, GPIO_SMT, 0x10, 9, 1), /* RFIC0/1 */
+ PINS_FIELD_BASE(118, 136, 4, GPIO_SMT, 0x10, 0, 1), /* LTE_TXBPI, BPI0~4, BPI21~27, PAVM */
+ PIN_FIELD_BASE(137, 137, 4, GPIO_SMT, 0x10, 1, 1), /* RTC32K */
+ PINS_FIELD_BASE(138, 142, 4, GPIO_SMT, 0x10, 2, 1), /* PWRAP */
+ PINS_FIELD_BASE(143, 145, 4, GPIO_SMT, 0x10, 3, 1), /* AUD */
+ PINS_FIELD_BASE(146, 147, 4, GPIO_SMT, 0x10, 4, 1), /* LCM_RST, DSI_TE */
+ PIN_FIELD_BASE(148, 148, 4, GPIO_SMT, 0x10, 5, 1), /* SRCLKENA0 */
+ PIN_FIELD_BASE(149, 149, 4, GPIO_SMT, 0x10, 1, 1), /* WATCHDOG */
+ PINS_FIELD_BASE(160, 162, 5, GPIO_SMT, 0x10, 0, 1), /* SIM2 */
+ PINS_FIELD_BASE(163, 165, 4, GPIO_SMT, 0x10, 1, 1), /* SIM1 */
+ PIN_FIELD_BASE(166, 166, 5, GPIO_SMT, 0x10, 2, 1), /* MSDC1_CMD */
+ PIN_FIELD_BASE(167, 167, 5, GPIO_SMT, 0x10, 3, 1), /* MSDC1_CLK */
+ PINS_FIELD_BASE(168, 171, 5, GPIO_SMT, 0x10, 4, 1), /* MSDC1_DAT */
+ PIN_FIELD_BASE(172, 172, 6, GPIO_SMT, 0x10, 0, 1), /* MSDC0_CMD */
+ PIN_FIELD_BASE(173, 173, 6, GPIO_SMT, 0x10, 1, 1), /* MSDC0_DSL */
+ PIN_FIELD_BASE(174, 174, 6, GPIO_SMT, 0x10, 2, 1), /* MSDC0_CLK */
+ PINS_FIELD_BASE(175, 182, 6, GPIO_SMT, 0x10, 3, 1), /* MSDC0_DAT */
+ PIN_FIELD_BASE(183, 183, 6, GPIO_SMT, 0x10, 4, 1), /* MSDC0_RSTB */
+ PINS_FIELD_BASE(184, 185, 6, GPIO_SMT, 0x10, 5, 1), /* FM */
+ PINS_FIELD_BASE(186, 189, 6, GPIO_SMT, 0x10, 6, 1), /* WB SPI */
+ PIN_FIELD_BASE(198, 198, 1, GPIO_SMT, 0x10, 2, 1), /* MSDC2_CMD */
+ PIN_FIELD_BASE(199, 199, 1, GPIO_SMT, 0x10, 3, 1), /* MSDC2_CLK */
+ PINS_FIELD_BASE(200, 203, 1, GPIO_SMT, 0x10, 4, 1) /* MSDC2_DAT */
+};
+
+static const struct mtk_pin_field_calc mt6735_pin_ies_range[] = {
+ PINS_FIELD_BASE(0, 4, 2, GPIO_IES, 0x10, 10, 1), /* EINT0~4 */
+ PINS_FIELD_BASE(5, 8, 3, GPIO_IES, 0x10, 3, 1), /* EINT5~8 */
+ PINS_FIELD_BASE(9, 12, 3, GPIO_IES, 0x10, 6, 1), /* EINT9~12 */
+ PINS_FIELD_BASE(13, 18, 1, GPIO_IES, 0x10, 0, 1), /* WB_CTRL */
+ PINS_FIELD_BASE(19, 21, 1, GPIO_IES, 0x10, 1, 1), /* ANTSEL */
+ PINS_FIELD_BASE(42, 44, 2, GPIO_IES, 0x10, 0, 1), /* CMPDAT */
+ PINS_FIELD_BASE(45, 46, 2, GPIO_IES, 0x10, 1, 1), /* CMMCLK */
+ PINS_FIELD_BASE(47, 48, 2, GPIO_IES, 0x10, 2, 1), /* I2C0 */
+ PINS_FIELD_BASE(49, 50, 2, GPIO_IES, 0x10, 3, 1), /* I2C1 */
+ PINS_FIELD_BASE(51, 52, 2, GPIO_IES, 0x10, 4, 1), /* I2C2 */
+ PINS_FIELD_BASE(53, 54, 2, GPIO_IES, 0x10, 5, 1), /* I2C3 */
+ PIN_FIELD_BASE(55, 55, 2, GPIO_IES, 0x10, 6, 1), /* SRCLKENAI */
+ PIN_FIELD_BASE(56, 56, 2, GPIO_IES, 0x10, 7, 1), /* SRCLKENA1 */
+ PINS_FIELD_BASE(57, 60, 2, GPIO_IES, 0x10, 8, 1), /* UART2/3 */
+ PINS_FIELD_BASE(61, 64, 2, GPIO_IES, 0x10, 9, 1), /* PCM */
+ PINS_FIELD_BASE(65, 68, 3, GPIO_IES, 0x10, 0, 1), /* SPI */
+ PIN_FIELD_BASE(69, 69, 3, GPIO_IES, 0x10, 1, 1), /* DISP_PWM */
+ PINS_FIELD_BASE(70, 73, 3, GPIO_IES, 0x10, 2, 1), /* JTAG */
+ PINS_FIELD_BASE(74, 77, 3, GPIO_IES, 0x10, 4, 1), /* UART0/1 */
+ PINS_FIELD_BASE(78, 80, 3, GPIO_IES, 0x10, 5, 1), /* I2S */
+ PINS_FIELD_BASE(81, 86, 3, GPIO_IES, 0x10, 7, 1), /* KEYPAD */
+ PINS_FIELD_BASE(87, 103, 3, GPIO_IES, 0x10, 8, 1), /* BPI5~20, C2K_TKBPI */
+ PINS_FIELD_BASE(104, 114, 3, GPIO_IES, 0x10, 9, 1), /* RFIC0/1 */
+ PINS_FIELD_BASE(118, 136, 4, GPIO_IES, 0x10, 0, 1), /* LTE_TXBPI, BPI0~4, BPI21~27, PAVM */
+ PIN_FIELD_BASE(137, 137, 4, GPIO_IES, 0x10, 1, 1), /* RTC32K */
+ PINS_FIELD_BASE(138, 142, 4, GPIO_IES, 0x10, 2, 1), /* PWRAP */
+ PINS_FIELD_BASE(143, 145, 4, GPIO_IES, 0x10, 3, 1), /* AUD */
+ PINS_FIELD_BASE(146, 147, 4, GPIO_IES, 0x10, 4, 1), /* LCM_RST, DSI_TE */
+ PIN_FIELD_BASE(148, 148, 4, GPIO_IES, 0x10, 5, 1), /* SRCLKENA0 */
+ PIN_FIELD_BASE(149, 149, 4, GPIO_IES, 0x10, 1, 1), /* WATCHDOG */
+ PINS_FIELD_BASE(160, 162, 5, GPIO_IES, 0x10, 0, 1), /* SIM2 */
+ PINS_FIELD_BASE(163, 165, 5, GPIO_IES, 0x10, 1, 1), /* SIM1 */
+ PIN_FIELD_BASE(166, 166, 5, GPIO_IES, 0x10, 2, 1), /* MSDC1_CMD */
+ PIN_FIELD_BASE(167, 167, 5, GPIO_IES, 0x10, 3, 1), /* MSDC1_CLK */
+ PINS_FIELD_BASE(168, 171, 5, GPIO_IES, 0x10, 4, 1), /* MSDC1_DAT */
+ PIN_FIELD_BASE(172, 172, 6, GPIO_IES, 0x10, 0, 1), /* MSDC0_CMD */
+ PIN_FIELD_BASE(173, 173, 6, GPIO_IES, 0x10, 1, 1), /* MSDC0_DSL */
+ PIN_FIELD_BASE(174, 174, 6, GPIO_IES, 0x10, 2, 1), /* MSDC0_CLK */
+ PINS_FIELD_BASE(175, 182, 6, GPIO_IES, 0x10, 3, 1), /* MSDC0_DAT */
+ PIN_FIELD_BASE(183, 183, 6, GPIO_IES, 0x10, 4, 1), /* MSDC0_RSTB */
+ PINS_FIELD_BASE(184, 185, 6, GPIO_IES, 0x10, 5, 1), /* FM */
+ PINS_FIELD_BASE(186, 189, 6, GPIO_IES, 0x10, 6, 1), /* WB SPI */
+ PIN_FIELD_BASE(198, 198, 1, GPIO_IES, 0x10, 2, 1), /* MSDC2_CMD */
+ PIN_FIELD_BASE(199, 199, 1, GPIO_IES, 0x10, 3, 1), /* MSDC2_CLK */
+ PINS_FIELD_BASE(200, 203, 1, GPIO_IES, 0x10, 4, 1) /* MSDC2_DAT */
+};
+
+static const struct mtk_pin_field_calc mt6735_pin_tdsel_range[] = {
+ PINS_FIELD_BASE(0, 4, 2, GPIO_TDSEL1, 0x04, 8, 4), /* EINT0~4 */
+ PINS_FIELD_BASE(5, 8, 3, GPIO_TDSEL0, 0x04, 12, 4), /* EINT5~8 */
+ PINS_FIELD_BASE(9, 12, 3, GPIO_TDSEL0, 0x04, 24, 4), /* EINT9~12 */
+ PINS_FIELD_BASE(13, 18, 1, GPIO_TDSEL0, 0x04, 0, 4), /* WB_CTRL */
+ PINS_FIELD_BASE(19, 21, 1, GPIO_TDSEL0, 0x04, 4, 4), /* ANTSEL */
+ PINS_FIELD_BASE(42, 44, 2, GPIO_TDSEL0, 0x04, 0, 4), /* CMPDAT */
+ PINS_FIELD_BASE(45, 46, 2, GPIO_TDSEL0, 0x04, 4, 4), /* CMMCLK */
+ PINS_FIELD_BASE(47, 48, 2, GPIO_TDSEL0, 0x04, 8, 4), /* I2C0 */
+ PINS_FIELD_BASE(49, 50, 2, GPIO_TDSEL0, 0x04, 12, 4), /* I2C1 */
+ PINS_FIELD_BASE(51, 52, 2, GPIO_TDSEL0, 0x04, 16, 4), /* I2C2 */
+ PINS_FIELD_BASE(53, 54, 2, GPIO_TDSEL0, 0x04, 20, 4), /* I2C3 */
+ PIN_FIELD_BASE(55, 55, 2, GPIO_TDSEL0, 0x04, 24, 4), /* SRCLKENAI */
+ PIN_FIELD_BASE(56, 56, 2, GPIO_TDSEL0, 0x04, 28, 4), /* SRCLKENA1 */
+ PINS_FIELD_BASE(57, 60, 2, GPIO_TDSEL1, 0x04, 0, 4), /* UART2/3 */
+ PINS_FIELD_BASE(61, 64, 2, GPIO_TDSEL1, 0x04, 4, 4), /* PCM */
+ PINS_FIELD_BASE(65, 68, 3, GPIO_TDSEL0, 0x04, 0, 4), /* SPI */
+ PIN_FIELD_BASE(69, 69, 3, GPIO_TDSEL0, 0x04, 4, 4), /* DISP_PWM */
+ PINS_FIELD_BASE(70, 73, 3, GPIO_TDSEL0, 0x04, 8, 4), /* JTAG */
+ PINS_FIELD_BASE(74, 77, 3, GPIO_TDSEL0, 0x04, 16, 4), /* UART0/1 */
+ PINS_FIELD_BASE(78, 80, 3, GPIO_TDSEL0, 0x04, 20, 4), /* I2S */
+ PINS_FIELD_BASE(81, 86, 3, GPIO_TDSEL0, 0x04, 28, 4), /* KEYPAD */
+ PINS_FIELD_BASE(87, 103, 3, GPIO_TDSEL1, 0x04, 0, 4), /* BPI5~20, C2K_TKBPI */
+ PINS_FIELD_BASE(104, 114, 3, GPIO_TDSEL1, 0x04, 4, 4), /* RFIC0/1 */
+ PINS_FIELD_BASE(118, 136, 4, GPIO_TDSEL0, 0x04, 0, 4), /* LTE_TXBPI, BPI0~4, BPI21~27, PAVM */
+ PIN_FIELD_BASE(137, 137, 4, GPIO_TDSEL0, 0x04, 4, 4), /* RTC32K */
+ PINS_FIELD_BASE(138, 142, 4, GPIO_TDSEL0, 0x04, 8, 4), /* PWRAP */
+ PINS_FIELD_BASE(143, 145, 4, GPIO_TDSEL0, 0x04, 12, 4), /* AUD */
+ PINS_FIELD_BASE(146, 147, 4, GPIO_TDSEL0, 0x04, 16, 4), /* LCM_RST, DSI_TE */
+ PIN_FIELD_BASE(148, 148, 4, GPIO_TDSEL0, 0x04, 20, 4), /* SRCLKENA0 */
+ PIN_FIELD_BASE(149, 149, 4, GPIO_TDSEL0, 0x04, 4, 4), /* WATCHDOG */
+ PINS_FIELD_BASE(160, 162, 5, GPIO_TDSEL0, 0x04, 0, 4), /* SIM2 */
+ PINS_FIELD_BASE(163, 165, 5, GPIO_TDSEL0, 0x04, 4, 4), /* SIM1 */
+ PIN_FIELD_BASE(166, 166, 5, GPIO_TDSEL0, 0x04, 8, 4), /* MSDC1_CMD */
+ PIN_FIELD_BASE(167, 167, 5, GPIO_TDSEL0, 0x04, 12, 4), /* MSDC1_CLK */
+ PINS_FIELD_BASE(168, 171, 5, GPIO_TDSEL0, 0x04, 16, 4), /* MSDC1_DAT */
+ PIN_FIELD_BASE(172, 172, 6, GPIO_TDSEL0, 0x04, 0, 4), /* MSDC0_CMD */
+ PIN_FIELD_BASE(173, 173, 6, GPIO_TDSEL0, 0x04, 4, 4), /* MSDC0_DSL */
+ PIN_FIELD_BASE(174, 174, 6, GPIO_TDSEL0, 0x04, 8, 4), /* MSDC0_CLK */
+ PINS_FIELD_BASE(175, 182, 6, GPIO_TDSEL0, 0x04, 12, 4), /* MSDC0_DAT */
+ PIN_FIELD_BASE(183, 183, 6, GPIO_TDSEL0, 0x04, 16, 4), /* MSDC0_RSTB */
+ PINS_FIELD_BASE(184, 185, 6, GPIO_TDSEL0, 0x04, 20, 4), /* FM */
+ PINS_FIELD_BASE(186, 189, 6, GPIO_TDSEL0, 0x04, 24, 4), /* WB SPI */
+ PIN_FIELD_BASE(198, 198, 1, GPIO_TDSEL0, 0x04, 8, 4), /* MSDC2_CMD */
+ PIN_FIELD_BASE(199, 199, 1, GPIO_TDSEL0, 0x04, 12, 4), /* MSDC2_CLK */
+ PINS_FIELD_BASE(200, 203, 1, GPIO_TDSEL0, 0x04, 16, 4) /* MSDC2_DAT */
+};
+
+static const struct mtk_pin_field_calc mt6735_pin_rdsel_range[] = {
+ PINS_FIELD_BASE(0, 4, 2, GPIO_RDSEL1, 0x04, 8, 4), /* EINT0~4 */
+ PINS_FIELD_BASE(5, 8, 3, GPIO_RDSEL0, 0x04, 12, 4), /* EINT5~8 */
+ PINS_FIELD_BASE(9, 12, 3, GPIO_RDSEL0, 0x04, 24, 4), /* EINT9~12 */
+ PINS_FIELD_BASE(13, 18, 1, GPIO_RDSEL0, 0x04, 0, 4), /* WB_CTRL */
+ PINS_FIELD_BASE(19, 21, 1, GPIO_RDSEL0, 0x04, 4, 4), /* ANTSEL */
+ PINS_FIELD_BASE(42, 44, 2, GPIO_RDSEL0, 0x04, 0, 4), /* CMPDAT */
+ PINS_FIELD_BASE(45, 46, 2, GPIO_RDSEL0, 0x04, 4, 4), /* CMMCLK */
+ PINS_FIELD_BASE(47, 48, 2, GPIO_RDSEL0, 0x04, 8, 4), /* I2C0 */
+ PINS_FIELD_BASE(49, 50, 2, GPIO_RDSEL0, 0x04, 12, 4), /* I2C1 */
+ PINS_FIELD_BASE(51, 52, 2, GPIO_RDSEL0, 0x04, 16, 4), /* I2C2 */
+ PINS_FIELD_BASE(53, 54, 2, GPIO_RDSEL0, 0x04, 20, 4), /* I2C3 */
+ PIN_FIELD_BASE(55, 55, 2, GPIO_RDSEL0, 0x04, 24, 4), /* SRCLKENAI */
+ PIN_FIELD_BASE(56, 56, 2, GPIO_RDSEL0, 0x04, 28, 4), /* SRCLKENA1 */
+ PINS_FIELD_BASE(57, 60, 2, GPIO_RDSEL1, 0x04, 0, 4), /* UART2/3 */
+ PINS_FIELD_BASE(61, 64, 2, GPIO_RDSEL1, 0x04, 4, 4), /* PCM */
+ PINS_FIELD_BASE(65, 68, 3, GPIO_RDSEL0, 0x04, 0, 4), /* SPI */
+ PIN_FIELD_BASE(69, 69, 3, GPIO_RDSEL0, 0x04, 4, 4), /* DISP_PWM */
+ PINS_FIELD_BASE(70, 73, 3, GPIO_RDSEL0, 0x04, 8, 4), /* JTAG */
+ PINS_FIELD_BASE(74, 77, 3, GPIO_RDSEL0, 0x04, 16, 4), /* UART0/1 */
+ PINS_FIELD_BASE(78, 80, 3, GPIO_RDSEL0, 0x04, 20, 4), /* I2S */
+ PINS_FIELD_BASE(81, 86, 3, GPIO_RDSEL0, 0x04, 28, 4), /* KEYPAD */
+ PINS_FIELD_BASE(87, 103, 3, GPIO_RDSEL1, 0x04, 0, 4), /* BPI5~20, C2K_TKBPI */
+ PINS_FIELD_BASE(104, 114, 3, GPIO_RDSEL1, 0x04, 4, 4), /* RFIC0/1 */
+ PINS_FIELD_BASE(118, 136, 4, GPIO_RDSEL0, 0x04, 0, 4), /* LTE_TXBPI, BPI0~4, BPI21~27, PAVM */
+ PIN_FIELD_BASE(137, 137, 4, GPIO_RDSEL0, 0x04, 4, 4), /* RTC32K */
+ PINS_FIELD_BASE(138, 142, 4, GPIO_RDSEL0, 0x04, 8, 4), /* PWRAP */
+ PINS_FIELD_BASE(143, 145, 4, GPIO_RDSEL0, 0x04, 12, 4), /* AUD */
+ PINS_FIELD_BASE(146, 147, 4, GPIO_RDSEL0, 0x04, 16, 4), /* LCM_RST, DSI_TE */
+ PIN_FIELD_BASE(148, 148, 4, GPIO_RDSEL0, 0x04, 20, 4), /* SRCLKENA0 */
+ PIN_FIELD_BASE(149, 149, 4, GPIO_RDSEL0, 0x04, 4, 4), /* WATCHDOG */
+ PINS_FIELD_BASE(160, 162, 5, GPIO_RDSEL0, 0x04, 0, 4), /* SIM2 */
+ PINS_FIELD_BASE(163, 165, 5, GPIO_RDSEL0, 0x04, 4, 4), /* SIM1 */
+ PIN_FIELD_BASE(166, 166, 5, GPIO_RDSEL0, 0x04, 8, 4), /* MSDC1_CMD */
+ PIN_FIELD_BASE(167, 167, 5, GPIO_RDSEL0, 0x04, 12, 4), /* MSDC1_CLK */
+ PINS_FIELD_BASE(168, 171, 5, GPIO_RDSEL0, 0x04, 16, 4), /* MSDC1_DAT */
+ PIN_FIELD_BASE(172, 172, 6, GPIO_RDSEL0, 0x04, 0, 4), /* MSDC0_CMD */
+ PIN_FIELD_BASE(173, 173, 6, GPIO_RDSEL0, 0x04, 4, 4), /* MSDC0_DSL */
+ PIN_FIELD_BASE(174, 174, 6, GPIO_RDSEL0, 0x04, 8, 4), /* MSDC0_CLK */
+ PINS_FIELD_BASE(175, 182, 6, GPIO_RDSEL0, 0x04, 12, 4), /* MSDC0_DAT */
+ PIN_FIELD_BASE(183, 183, 6, GPIO_RDSEL0, 0x04, 16, 4), /* MSDC0_RSTB */
+ PINS_FIELD_BASE(184, 185, 6, GPIO_RDSEL0, 0x04, 20, 4), /* FM */
+ PINS_FIELD_BASE(186, 189, 6, GPIO_RDSEL0, 0x04, 24, 4), /* WB SPI */
+ PIN_FIELD_BASE(198, 198, 1, GPIO_RDSEL0, 0x04, 8, 4), /* MSDC2_CMD */
+ PIN_FIELD_BASE(199, 199, 1, GPIO_RDSEL0, 0x04, 12, 4), /* MSDC2_CLK */
+ PINS_FIELD_BASE(200, 203, 1, GPIO_RDSEL0, 0x04, 16, 4) /* MSDC2_DAT */
+};
+
+static const struct mtk_pin_field_calc mt6735_pin_drv_range[] = {
+ PINS_FIELD_BASE(0, 4, 2, GPIO_DRV1, 0x04, 8, 2), /* EINT0~4 */
+ PINS_FIELD_BASE(5, 8, 3, GPIO_DRV0, 0x04, 12, 2), /* EINT5~8 */
+ PINS_FIELD_BASE(9, 12, 3, GPIO_DRV0, 0x04, 24, 2), /* EINT9~12 */
+ PINS_FIELD_BASE(13, 18, 1, GPIO_DRV0, 0x04, 0, 2), /* WB_CTRL */
+ PINS_FIELD_BASE(19, 21, 1, GPIO_DRV0, 0x04, 4, 2), /* ANTSEL */
+ PINS_FIELD_BASE(42, 44, 2, GPIO_DRV0, 0x04, 0, 2), /* CMPDAT */
+ PINS_FIELD_BASE(45, 46, 2, GPIO_DRV0, 0x04, 4, 3), /* CMMCLK */
+ PINS_FIELD_BASE(47, 48, 2, GPIO_DRV0, 0x04, 8, 1), /* I2C0 */
+ PINS_FIELD_BASE(49, 50, 2, GPIO_DRV0, 0x04, 12, 1), /* I2C1 */
+ PINS_FIELD_BASE(51, 52, 2, GPIO_DRV0, 0x04, 16, 1), /* I2C2 */
+ PINS_FIELD_BASE(53, 54, 2, GPIO_DRV0, 0x04, 20, 1), /* I2C3 */
+ PIN_FIELD_BASE(55, 55, 2, GPIO_DRV0, 0x04, 24, 2), /* SRCLKENAI */
+ PIN_FIELD_BASE(56, 56, 2, GPIO_DRV0, 0x04, 28, 2), /* SRCLKENA1 */
+ PINS_FIELD_BASE(57, 60, 2, GPIO_DRV1, 0x04, 0, 2), /* UART2/3 */
+ PINS_FIELD_BASE(61, 64, 2, GPIO_DRV1, 0x04, 4, 2), /* PCM */
+ PINS_FIELD_BASE(65, 68, 3, GPIO_DRV0, 0x04, 0, 2), /* SPI */
+ PIN_FIELD_BASE(69, 69, 3, GPIO_DRV0, 0x04, 4, 2), /* DISP_PWM */
+ PINS_FIELD_BASE(70, 73, 3, GPIO_DRV0, 0x04, 8, 2), /* JTAG */
+ PINS_FIELD_BASE(74, 77, 3, GPIO_DRV0, 0x04, 16, 2), /* UART0/1 */
+ PINS_FIELD_BASE(78, 80, 3, GPIO_DRV0, 0x04, 20, 2), /* I2S */
+ PINS_FIELD_BASE(81, 86, 3, GPIO_DRV0, 0x04, 28, 2), /* KEYPAD */
+ PINS_FIELD_BASE(87, 103, 3, GPIO_DRV1, 0x04, 0, 2), /* BPI5~20, C2K_TKBPI */
+ PINS_FIELD_BASE(104, 114, 3, GPIO_DRV1, 0x04, 4, 2), /* RFIC0/1 */
+ PINS_FIELD_BASE(118, 136, 4, GPIO_DRV0, 0x04, 0, 2), /* LTE_TXBPI, BPI0~4, BPI21~27, PAVM */
+ PIN_FIELD_BASE(137, 137, 4, GPIO_DRV0, 0x04, 4, 2), /* RTC32K */
+ PINS_FIELD_BASE(138, 142, 4, GPIO_DRV0, 0x04, 8, 2), /* PWRAP */
+ PINS_FIELD_BASE(143, 145, 4, GPIO_DRV0, 0x04, 12, 2), /* AUD */
+ PINS_FIELD_BASE(146, 147, 4, GPIO_DRV0, 0x04, 16, 2), /* LCM_RST, DSI_TE */
+ PIN_FIELD_BASE(148, 148, 4, GPIO_DRV0, 0x04, 20, 2), /* SRCLKENA0 */
+ PIN_FIELD_BASE(149, 149, 4, GPIO_DRV0, 0x04, 4, 2), /* WATCHDOG */
+ PINS_FIELD_BASE(160, 162, 5, GPIO_DRV0, 0x04, 0, 2), /* SIM2 */
+ PINS_FIELD_BASE(163, 165, 5, GPIO_DRV0, 0x04, 4, 2), /* SIM1 */
+ PIN_FIELD_BASE(166, 166, 5, GPIO_DRV0, 0x04, 8, 3), /* MSDC1_CMD */
+ PIN_FIELD_BASE(167, 167, 5, GPIO_DRV0, 0x04, 12, 3), /* MSDC1_CLK */
+ PINS_FIELD_BASE(168, 171, 5, GPIO_DRV0, 0x04, 16, 3), /* MSDC1_DAT */
+ PIN_FIELD_BASE(172, 172, 6, GPIO_DRV0, 0x04, 0, 3), /* MSDC0_CMD */
+ PIN_FIELD_BASE(173, 173, 6, GPIO_DRV0, 0x04, 4, 3), /* MSDC0_DSL */
+ PIN_FIELD_BASE(174, 174, 6, GPIO_DRV0, 0x04, 8, 3), /* MSDC0_CLK */
+ PINS_FIELD_BASE(175, 182, 6, GPIO_DRV0, 0x04, 12, 3), /* MSDC0_DAT */
+ PIN_FIELD_BASE(183, 183, 6, GPIO_DRV0, 0x04, 16, 3), /* MSDC0_RSTB */
+ PINS_FIELD_BASE(184, 185, 6, GPIO_DRV0, 0x04, 20, 2), /* FM */
+ PINS_FIELD_BASE(186, 189, 6, GPIO_DRV0, 0x04, 24, 2), /* WB SPI */
+ PIN_FIELD_BASE(198, 198, 1, GPIO_DRV0, 0x04, 8, 3), /* MSDC2_CMD */
+ PIN_FIELD_BASE(199, 199, 1, GPIO_DRV0, 0x04, 12, 3), /* MSDC2_CLK */
+ PINS_FIELD_BASE(200, 203, 1, GPIO_DRV0, 0x04, 16, 3) /* MSDC2_DAT */
+};
+
+static const struct mtk_pin_field_calc mt6735_pin_r0_range[] = {
+ PIN_FIELD_BASE(45, 46, 2, GPIO_PUPD0, 0x10, 0, 4), /* CMMCLK */
+ PIN_FIELD_BASE(81, 86, 3, GPIO_PUPD0, 0x10, 0, 4), /* KEYPAD */
+ PIN_FIELD_BASE(160, 162, 5, GPIO_PUPD1, 0x10, 0, 4), /* SIM2 */
+ PIN_FIELD_BASE(163, 165, 5, GPIO_PUPD1, 0x10, 16, 4), /* SIM1 */
+ PIN_FIELD_BASE(166, 171, 5, GPIO_PUPD0, 0x10, 0, 4), /* MSDC1 */
+ PIN_FIELD_BASE(172, 183, 6, GPIO_PUPD0, 0x10, 0, 4), /* MSDC0 */
+ PIN_FIELD_BASE(198, 203, 1, GPIO_PUPD0, 0x10, 0, 4) /* MSDC2 */
+};
+
+static const struct mtk_pin_field_calc mt6735_pin_r1_range[] = {
+ PIN_FIELD_BASE(45, 46, 2, GPIO_PUPD0, 0x10, 1, 4), /* CMMCLK */
+ PIN_FIELD_BASE(81, 86, 3, GPIO_PUPD0, 0x10, 1, 4), /* KEYPAD */
+ PIN_FIELD_BASE(160, 162, 5, GPIO_PUPD1, 0x10, 1, 4), /* SIM2 */
+ PIN_FIELD_BASE(163, 165, 5, GPIO_PUPD1, 0x10, 17, 4), /* SIM1 */
+ PIN_FIELD_BASE(166, 171, 5, GPIO_PUPD0, 0x10, 1, 4), /* MSDC1 */
+ PIN_FIELD_BASE(172, 183, 6, GPIO_PUPD0, 0x10, 1, 4), /* MSDC0 */
+ PIN_FIELD_BASE(198, 203, 1, GPIO_PUPD0, 0x10, 1, 4) /* MSDC2 */
+};
+
+static const struct mtk_pin_field_calc mt6735_pin_pupd_range[] = {
+ PIN_FIELD_BASE(45, 46, 2, GPIO_PUPD0, 0x10, 2, 4), /* CMMCLK */
+ PIN_FIELD_BASE(81, 86, 3, GPIO_PUPD0, 0x10, 2, 4), /* KEYPAD */
+ PIN_FIELD_BASE(160, 162, 5, GPIO_PUPD1, 0x10, 2, 4), /* SIM2 */
+ PIN_FIELD_BASE(163, 165, 5, GPIO_PUPD1, 0x10, 18, 4), /* SIM1 */
+ PIN_FIELD_BASE(166, 171, 5, GPIO_PUPD0, 0x10, 2, 4), /* MSDC1 */
+ PIN_FIELD_BASE(172, 183, 6, GPIO_PUPD0, 0x10, 2, 4), /* MSDC0 */
+ PIN_FIELD_BASE(198, 203, 1, GPIO_PUPD0, 0x10, 2, 4) /* MSDC2 */
+};
+
+static const struct mtk_pin_field_calc mt6735_pin_pullen_range[] = {
+ PIN_FIELD_BASE(0, 4, 2, GPIO_PULLEN0, 0x10, 23, 1),
+ PIN_FIELD_BASE(5, 8, 3, GPIO_PULLEN0, 0x10, 9, 1),
+ PIN_FIELD_BASE(9, 12, 3, GPIO_PULLEN0, 0x10, 20, 1),
+ PIN_FIELD_BASE(13, 21, 1, GPIO_PULLEN0, 0x10, 0, 1),
+ PIN_FIELD_BASE(42, 44, 2, GPIO_PULLEN0, 0x10, 0, 1),
+ PIN_FIELD_BASE(47, 64, 2, GPIO_PULLEN0, 0x10, 5, 1),
+ PIN_FIELD_BASE(65, 73, 3, GPIO_PULLEN0, 0x10, 0, 1),
+ PIN_FIELD_BASE(74, 80, 3, GPIO_PULLEN0, 0x10, 13, 1),
+ PIN_FIELD_BASE(87, 114, 3, GPIO_PULLEN0, 0x10, 30, 1),
+ PIN_FIELD_BASE(118, 149, 4, GPIO_PULLEN0, 0x10, 0, 1),
+ PIN_FIELD_BASE(184, 189, 6, GPIO_PULLEN0, 0x10, 12, 1)
+};
+
+static const struct mtk_pin_field_calc mt6735_pin_pullsel_range[] = {
+ PIN_FIELD_BASE(0, 4, 2, GPIO_PULLSEL0, 0x10, 23, 1),
+ PIN_FIELD_BASE(5, 8, 3, GPIO_PULLSEL0, 0x10, 9, 1),
+ PIN_FIELD_BASE(9, 12, 3, GPIO_PULLSEL0, 0x10, 20, 1),
+ PIN_FIELD_BASE(13, 21, 1, GPIO_PULLSEL0, 0x10, 0, 1),
+ PIN_FIELD_BASE(42, 44, 2, GPIO_PULLSEL0, 0x10, 0, 1),
+ PIN_FIELD_BASE(47, 64, 2, GPIO_PULLSEL0, 0x10, 5, 1),
+ PIN_FIELD_BASE(65, 73, 3, GPIO_PULLSEL0, 0x10, 0, 1),
+ PIN_FIELD_BASE(74, 80, 3, GPIO_PULLSEL0, 0x10, 13, 1),
+ PIN_FIELD_BASE(87, 114, 3, GPIO_PULLSEL0, 0x10, 30, 1),
+ PIN_FIELD_BASE(118, 149, 4, GPIO_PULLSEL0, 0x10, 0, 1),
+ PIN_FIELD_BASE(184, 189, 6, GPIO_PULLSEL0, 0x10, 12, 1)
+};
+
+static const struct mtk_pin_reg_calc mt6735_reg_cals[] = {
+ [PINCTRL_PIN_REG_DIR] = MTK_RANGE(mt6735_pin_dir_range),
+ [PINCTRL_PIN_REG_DI] = MTK_RANGE(mt6735_pin_di_range),
+ [PINCTRL_PIN_REG_DO] = MTK_RANGE(mt6735_pin_do_range),
+ [PINCTRL_PIN_REG_MODE] = MTK_RANGE(mt6735_pin_mode_range),
+ [PINCTRL_PIN_REG_SMT] = MTK_RANGE(mt6735_pin_smt_range),
+ [PINCTRL_PIN_REG_IES] = MTK_RANGE(mt6735_pin_ies_range),
+ [PINCTRL_PIN_REG_TDSEL] = MTK_RANGE(mt6735_pin_tdsel_range),
+ [PINCTRL_PIN_REG_RDSEL] = MTK_RANGE(mt6735_pin_rdsel_range),
+ [PINCTRL_PIN_REG_DRV] = MTK_RANGE(mt6735_pin_drv_range),
+ [PINCTRL_PIN_REG_R0] = MTK_RANGE(mt6735_pin_r0_range),
+ [PINCTRL_PIN_REG_R1] = MTK_RANGE(mt6735_pin_r1_range),
+ [PINCTRL_PIN_REG_PUPD] = MTK_RANGE(mt6735_pin_pupd_range),
+ [PINCTRL_PIN_REG_PULLEN] = MTK_RANGE(mt6735_pin_pullen_range),
+ [PINCTRL_PIN_REG_PULLSEL] = MTK_RANGE(mt6735_pin_pullsel_range),
+};
+
+static const struct mtk_pin_field_calc mt6735m_pin_dir_range[] = {
+ PIN_FIELD(0, 197, GPIO_DIR, 0x10, 0, 1)
+};
+
+static const struct mtk_pin_field_calc mt6735m_pin_di_range[] = {
+ PIN_FIELD(0, 197, GPIO_DIN, 0x10, 0, 1)
+};
+
+static const struct mtk_pin_field_calc mt6735m_pin_do_range[] = {
+ PIN_FIELD(0, 197, GPIO_DOUT, 0x10, 0, 1)
+};
+
+static const struct mtk_pin_field_calc mt6735m_pin_mode_range[] = {
+ PIN_FIELD(0, 4, GPIO_MODE1, 0x10, 0, 3),
+ PIN_FIELD(5, 9, GPIO_MODE1, 0x10, 16, 3),
+ PIN_FIELD(10, 14, GPIO_MODE2, 0x10, 0, 3),
+ PIN_FIELD(15, 19, GPIO_MODE2, 0x10, 16, 3),
+ PIN_FIELD(20, 24, GPIO_MODE3, 0x10, 0, 3),
+ PIN_FIELD(25, 29, GPIO_MODE3, 0x10, 16, 3),
+ PIN_FIELD(30, 34, GPIO_MODE4, 0x10, 0, 3),
+ PIN_FIELD(35, 39, GPIO_MODE4, 0x10, 16, 3),
+ PIN_FIELD(40, 44, GPIO_MODE5, 0x10, 0, 3),
+ PIN_FIELD(45, 49, GPIO_MODE5, 0x10, 16, 3),
+ PIN_FIELD(50, 54, GPIO_MODE6, 0x10, 0, 3),
+ PIN_FIELD(55, 59, GPIO_MODE6, 0x10, 16, 3),
+ PIN_FIELD(60, 64, GPIO_MODE7, 0x10, 0, 3),
+ PIN_FIELD(65, 69, GPIO_MODE7, 0x10, 16, 3),
+ PIN_FIELD(70, 74, GPIO_MODE8, 0x10, 0, 3),
+ PIN_FIELD(75, 79, GPIO_MODE8, 0x10, 16, 3),
+ PIN_FIELD(80, 84, GPIO_MODE9, 0x10, 0, 3),
+ PIN_FIELD(85, 89, GPIO_MODE9, 0x10, 16, 3),
+ PIN_FIELD(90, 94, GPIO_MODE10, 0x10, 0, 3),
+ PIN_FIELD(95, 99, GPIO_MODE10, 0x10, 16, 3),
+ PIN_FIELD(100, 104, GPIO_MODE11, 0x10, 0, 3),
+ PIN_FIELD(105, 109, GPIO_MODE11, 0x10, 16, 3),
+ PIN_FIELD(110, 114, GPIO_MODE12, 0x10, 0, 3),
+ PIN_FIELD(115, 119, GPIO_MODE12, 0x10, 16, 3),
+ PIN_FIELD(120, 124, GPIO_MODE13, 0x10, 0, 3),
+ PIN_FIELD(125, 129, GPIO_MODE13, 0x10, 16, 3),
+ PIN_FIELD(130, 134, GPIO_MODE14, 0x10, 0, 3),
+ PIN_FIELD(135, 139, GPIO_MODE14, 0x10, 16, 3),
+ PIN_FIELD(140, 144, GPIO_MODE15, 0x10, 0, 3),
+ PIN_FIELD(145, 149, GPIO_MODE15, 0x10, 16, 3),
+ PIN_FIELD(150, 154, GPIO_MODE16, 0x10, 0, 3),
+ PIN_FIELD(155, 159, GPIO_MODE16, 0x10, 16, 3),
+ PIN_FIELD(160, 164, GPIO_MODE17, 0x10, 0, 3),
+ PIN_FIELD(165, 169, GPIO_MODE17, 0x10, 16, 3),
+ PIN_FIELD(170, 174, GPIO_MODE18, 0x10, 0, 3),
+ PIN_FIELD(175, 179, GPIO_MODE18, 0x10, 16, 3),
+ PIN_FIELD(180, 184, GPIO_MODE19, 0x10, 0, 3),
+ PIN_FIELD(185, 189, GPIO_MODE19, 0x10, 16, 3),
+ PIN_FIELD(190, 194, GPIO_MODE20, 0x10, 0, 3),
+ PIN_FIELD(195, 197, GPIO_MODE20, 0x10, 16, 3),
+};
+
+/*
+ * Rather than redefining all tables for MT6735M just to remove the 6 MSDC2
+ * pins at the end, reuse the MT6735 tables and exclude the MSDC2 pin fields
+ * by subtracting their count from the array size when possible
+ */
+static const struct mtk_pin_reg_calc mt6735m_reg_cals[] = {
+ [PINCTRL_PIN_REG_DIR] = MTK_RANGE(mt6735m_pin_dir_range),
+ [PINCTRL_PIN_REG_DI] = MTK_RANGE(mt6735m_pin_di_range),
+ [PINCTRL_PIN_REG_DO] = MTK_RANGE(mt6735m_pin_do_range),
+ [PINCTRL_PIN_REG_MODE] = MTK_RANGE(mt6735m_pin_mode_range),
+ [PINCTRL_PIN_REG_SMT] = { mt6735_pin_smt_range,
+ ARRAY_SIZE(mt6735_pin_smt_range) - 3 },
+ [PINCTRL_PIN_REG_IES] = { mt6735_pin_ies_range,
+ ARRAY_SIZE(mt6735_pin_ies_range) - 3 },
+ [PINCTRL_PIN_REG_TDSEL] = { mt6735_pin_tdsel_range,
+ ARRAY_SIZE(mt6735_pin_tdsel_range) - 3 },
+ [PINCTRL_PIN_REG_RDSEL] = { mt6735_pin_rdsel_range,
+ ARRAY_SIZE(mt6735_pin_rdsel_range) - 3 },
+ [PINCTRL_PIN_REG_DRV] = { mt6735_pin_drv_range,
+ ARRAY_SIZE(mt6735_pin_drv_range) - 3 },
+ [PINCTRL_PIN_REG_R0] = { mt6735_pin_r0_range,
+ ARRAY_SIZE(mt6735_pin_r0_range) - 1 },
+ [PINCTRL_PIN_REG_R1] = { mt6735_pin_r1_range,
+ ARRAY_SIZE(mt6735_pin_r1_range) - 1 },
+ [PINCTRL_PIN_REG_PUPD] = { mt6735_pin_pupd_range,
+ ARRAY_SIZE(mt6735_pin_pupd_range) - 1 },
+ [PINCTRL_PIN_REG_PULLEN] = MTK_RANGE(mt6735_pin_pullen_range),
+ [PINCTRL_PIN_REG_PULLSEL] = MTK_RANGE(mt6735_pin_pullsel_range),
+};
+
+static const char * const mt6735_pinctrl_register_base_names[] = {
+ "gpio", "iocfg0", "iocfg1", "iocfg2", "iocfg3", "iocfg4", "iocfg5"
+};
+
+static const struct mtk_eint_hw mt6735_eint_hw = {
+ .port_mask = 7,
+ .ports = 6,
+ .ap_num = 224,
+ .db_cnt = 16,
+};
+
+static const struct mtk_pin_soc mt6735_data = {
+ .reg_cal = mt6735_reg_cals,
+ .pins = mtk_pins_mt6735,
+ .npins = ARRAY_SIZE(mtk_pins_mt6735),
+ .ngrps = ARRAY_SIZE(mtk_pins_mt6735),
+ .eint_hw = &mt6735_eint_hw,
+ .gpio_m = 0,
+ .ies_present = true,
+ .base_names = mt6735_pinctrl_register_base_names,
+ .nbase_names = ARRAY_SIZE(mt6735_pinctrl_register_base_names),
+ .bias_set_combo = mtk_pinconf_bias_set_combo,
+ .bias_get_combo = mtk_pinconf_bias_get_combo,
+ .drive_set = mtk_pinconf_drive_set_raw,
+ .drive_get = mtk_pinconf_drive_get_raw,
+ .adv_pull_get = mtk_pinconf_adv_pull_get,
+ .adv_pull_set = mtk_pinconf_adv_pull_set,
+};
+
+static const struct mtk_pin_soc mt6735m_data = {
+ .reg_cal = mt6735m_reg_cals,
+ .pins = mtk_pins_mt6735m,
+ .npins = ARRAY_SIZE(mtk_pins_mt6735m),
+ .ngrps = ARRAY_SIZE(mtk_pins_mt6735m),
+ .eint_hw = &mt6735_eint_hw,
+ .gpio_m = 0,
+ .ies_present = true,
+ .base_names = mt6735_pinctrl_register_base_names,
+ .nbase_names = ARRAY_SIZE(mt6735_pinctrl_register_base_names),
+ .bias_set_combo = mtk_pinconf_bias_set_combo,
+ .bias_get_combo = mtk_pinconf_bias_get_combo,
+ .drive_set = mtk_pinconf_drive_set_raw,
+ .drive_get = mtk_pinconf_drive_get_raw,
+ .adv_pull_get = mtk_pinconf_adv_pull_get,
+ .adv_pull_set = mtk_pinconf_adv_pull_set,
+};
+
+static const struct of_device_id mt6735_pinctrl_match[] = {
+ { .compatible = "mediatek,mt6735-pinctrl", .data = &mt6735_data },
+ { .compatible = "mediatek,mt6735m-pinctrl", .data = &mt6735m_data },
+ { /* sentinel */ }
+};
+MODULE_DEVICE_TABLE(of, mt6735_pinctrl_match);
+
+static struct platform_driver mt6735_pinctrl_driver = {
+ .probe = mtk_paris_pinctrl_probe,
+ .driver = {
+ .name = "mt6735-pinctrl",
+ .of_match_table = mt6735_pinctrl_match,
+ .pm = &mtk_paris_pinctrl_pm_ops,
+ },
+};
+module_platform_driver(mt6735_pinctrl_driver);
+
+MODULE_AUTHOR("Yassine Oudjana <[email protected]>");
+MODULE_DESCRIPTION("MediaTek MT6735 pinctrl driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/pinctrl/mediatek/pinctrl-mtk-mt6735.h b/drivers/pinctrl/mediatek/pinctrl-mtk-mt6735.h
new file mode 100644
index 000000000000..b897153aea9e
--- /dev/null
+++ b/drivers/pinctrl/mediatek/pinctrl-mtk-mt6735.h
@@ -0,0 +1,3993 @@
+/* SPDX-License-Identifier: GPL-2.0-only */
+/*
+ * Copyright (c) 2022 Yassine Oudjana <[email protected]>
+ */
+
+#ifndef __PINCTRL_MTK_MT6735_H
+#define __PINCTRL_MTK_MT6735_H
+
+#include "pinctrl-paris.h"
+
+static const struct mtk_pin_desc mtk_pins_mt6735[] = {
+ MTK_PIN(
+ 0, "GPIO0",
+ MTK_EINT_FUNCTION(0, 0),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO0"),
+ MTK_FUNCTION(1, "IDDIG"),
+ MTK_FUNCTION(2, "DPI_D4"),
+ MTK_FUNCTION(3, "CLKM4"),
+ MTK_FUNCTION(4, "EXT_FRAME_SYNC"),
+ MTK_FUNCTION(5, "PWM3"),
+ MTK_FUNCTION(6, "KCOL2"),
+ MTK_FUNCTION(7, "C2K_ARM_EINT0")
+ ),
+ MTK_PIN(
+ 1, "GPIO1",
+ MTK_EINT_FUNCTION(0, 1),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO1"),
+ MTK_FUNCTION(1, "PWM2"),
+ MTK_FUNCTION(2, "DPI_D5"),
+ MTK_FUNCTION(3, "MD_EINT0"),
+ MTK_FUNCTION(4, "TDD_TDO"),
+ MTK_FUNCTION(5, "CONN_MCU_TDO"),
+ MTK_FUNCTION(6, "PTA_RXD"),
+ MTK_FUNCTION(7, "C2K_ARM_EINT1")
+ ),
+ MTK_PIN(
+ 2, "GPIO2",
+ MTK_EINT_FUNCTION(0, 2),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO2"),
+ MTK_FUNCTION(1, "CLKM0"),
+ MTK_FUNCTION(2, "DPI_D6"),
+ MTK_FUNCTION(3, "MD_EINT0"),
+ MTK_FUNCTION(4, "USB_DRVVBUS"),
+ MTK_FUNCTION(5, "CONN_MCU_DBGACK_N"),
+ MTK_FUNCTION(6, "PTA_TXD"),
+ MTK_FUNCTION(7, "C2K_ARM_EINT2")
+ ),
+ MTK_PIN(
+ 3, "GPIO3",
+ MTK_EINT_FUNCTION(0, 3),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO3"),
+ MTK_FUNCTION(1, "CLKM1"),
+ MTK_FUNCTION(2, "DPI_D7"),
+ MTK_FUNCTION(3, "SPI_MIB"),
+ MTK_FUNCTION(4, "MD_EINT0"),
+ MTK_FUNCTION(5, "CONN_MCU_DBGI_N"),
+ MTK_FUNCTION(6, "CONN_MCU_AICE_TMSC"),
+ MTK_FUNCTION(7, "C2K_ARM_EINT3")
+ ),
+ MTK_PIN(
+ 4, "GPIO4",
+ MTK_EINT_FUNCTION(0, 4),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO4"),
+ MTK_FUNCTION(1, "CLKM2"),
+ MTK_FUNCTION(2, "DPI_D8"),
+ MTK_FUNCTION(3, "SPI_MOB"),
+ MTK_FUNCTION(4, "TDD_TCK"),
+ MTK_FUNCTION(5, "CONN_MCU_TCK[0]"),
+ MTK_FUNCTION(6, "CONN_MCU_AICE_TCKC"),
+ MTK_FUNCTION(7, "C2K_DM_EINT0")
+ ),
+ MTK_PIN(
+ 5, "GPIO5",
+ MTK_EINT_FUNCTION(0, 5),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO5"),
+ MTK_FUNCTION(1, "UCTS2"),
+ MTK_FUNCTION(2, "DPI_D9"),
+ MTK_FUNCTION(3, "SPI_CSB"),
+ MTK_FUNCTION(4, "TDD_TDI"),
+ MTK_FUNCTION(5, "CONN_MCU_TDI"),
+ MTK_FUNCTION(6, "I2S1_DO"),
+ MTK_FUNCTION(7, "MD_URXD")
+ ),
+ MTK_PIN(
+ 6, "GPIO6",
+ MTK_EINT_FUNCTION(0, 6),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO6"),
+ MTK_FUNCTION(1, "URTS2"),
+ MTK_FUNCTION(2, "DPI_D10"),
+ MTK_FUNCTION(3, "SPI_CKB"),
+ MTK_FUNCTION(4, "TDD_TRSTN"),
+ MTK_FUNCTION(5, "CONN_MCU_TRST_B"),
+ MTK_FUNCTION(6, "I2S1_LRCK"),
+ MTK_FUNCTION(7, "MD_UTXD")
+ ),
+ MTK_PIN(
+ 7, "GPIO7",
+ MTK_EINT_FUNCTION(0, 7),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO7"),
+ MTK_FUNCTION(1, "UCTS3"),
+ MTK_FUNCTION(2, "DPI_D11"),
+ MTK_FUNCTION(3, "SDA1"),
+ MTK_FUNCTION(4, "TDD_TMS"),
+ MTK_FUNCTION(5, "CONN_MCU_TMS"),
+ MTK_FUNCTION(6, "I2S1_BCK"),
+ MTK_FUNCTION(7, "TDD_TXD")
+ ),
+ MTK_PIN(
+ 8, "GPIO8",
+ MTK_EINT_FUNCTION(0, 8),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO8"),
+ MTK_FUNCTION(1, "URTS3"),
+ MTK_FUNCTION(2, "C2K_UIM0_HOT_PLUG_IN"),
+ MTK_FUNCTION(3, "SCL1"),
+ MTK_FUNCTION(4, "PCM1_DO1"),
+ MTK_FUNCTION(5, "MD_EINT1"),
+ MTK_FUNCTION(6, "KCOL4"),
+ MTK_FUNCTION(7, "UTXD0")
+ ),
+ MTK_PIN(
+ 9, "GPIO9",
+ MTK_EINT_FUNCTION(0, 9),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO9"),
+ MTK_FUNCTION(1, "C2K_UIM1_HOT_PLUG_IN"),
+ MTK_FUNCTION(2, "PCM1_DO0"),
+ MTK_FUNCTION(3, "I2S3_MCK"),
+ MTK_FUNCTION(4, "MD_EINT2"),
+ MTK_FUNCTION(5, "CLKM2"),
+ MTK_FUNCTION(6, "I2S1_MCK"),
+ MTK_FUNCTION(7, "DBG_MON_A29")
+ ),
+ MTK_PIN(
+ 10, "GPIO10",
+ MTK_EINT_FUNCTION(0, 10),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO10"),
+ MTK_FUNCTION(1, "PWM1"),
+ MTK_FUNCTION(2, "CLKM1"),
+ MTK_FUNCTION(3, "KROW2"),
+ MTK_FUNCTION(4, "MD_EINT0"),
+ MTK_FUNCTION(5, "I2S1_MCK"),
+ MTK_FUNCTION(6, "SDA3"),
+ MTK_FUNCTION(7, "DBG_MON_A30")
+ ),
+ MTK_PIN(
+ 11, "GPIO11",
+ MTK_EINT_FUNCTION(0, 11),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO11"),
+ MTK_FUNCTION(1, "MD_EINT1"),
+ MTK_FUNCTION(2, "IRTX_OUT"),
+ MTK_FUNCTION(3, "C2K_UIM0_HOT_PLUG_IN"),
+ MTK_FUNCTION(4, "CLKM0"),
+ MTK_FUNCTION(5, "I2S2_MCK"),
+ MTK_FUNCTION(6, "SCL3"),
+ MTK_FUNCTION(7, "URXD0")
+ ),
+ MTK_PIN(
+ 12, "GPIO12",
+ MTK_EINT_FUNCTION(0, 12),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO12"),
+ MTK_FUNCTION(1, "I2S0_MCK"),
+ MTK_FUNCTION(2, "C2K_UIM1_HOT_PLUG_IN"),
+ MTK_FUNCTION(3, "KCOL2"),
+ MTK_FUNCTION(4, "MD_EINT2"),
+ MTK_FUNCTION(5, "IRTX_OUT"),
+ MTK_FUNCTION(6, "SRCLKENAI2"),
+ MTK_FUNCTION(7, "PCM1_DO1")
+ ),
+ MTK_PIN(
+ 13, "GPIO13",
+ MTK_EINT_FUNCTION(0, 13),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO13"),
+ MTK_FUNCTION(1, "WB_CTRL0"),
+ MTK_FUNCTION(3, "C2K_ARM_EINT0"),
+ MTK_FUNCTION(7, "DBG_MON_A0")
+ ),
+ MTK_PIN(
+ 14, "GPIO14",
+ MTK_EINT_FUNCTION(0, 14),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO14"),
+ MTK_FUNCTION(1, "WB_CTRL1"),
+ MTK_FUNCTION(3, "C2K_ARM_EINT1"),
+ MTK_FUNCTION(7, "DBG_MON_A1")
+ ),
+ MTK_PIN(
+ 15, "GPIO15",
+ MTK_EINT_FUNCTION(0, 15),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO15"),
+ MTK_FUNCTION(1, "WB_CTRL2"),
+ MTK_FUNCTION(3, "C2K_ARM_EINT2"),
+ MTK_FUNCTION(7, "DBG_MON_A2")
+ ),
+ MTK_PIN(
+ 16, "GPIO16",
+ MTK_EINT_FUNCTION(0, 16),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO16"),
+ MTK_FUNCTION(1, "WB_CTRL3"),
+ MTK_FUNCTION(3, "C2K_ARM_EINT3"),
+ MTK_FUNCTION(7, "DBG_MON_A3")
+ ),
+ MTK_PIN(
+ 17, "GPIO17",
+ MTK_EINT_FUNCTION(0, 17),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO17"),
+ MTK_FUNCTION(1, "WB_CTRL4"),
+ MTK_FUNCTION(3, "C2K_DM_EINT0"),
+ MTK_FUNCTION(4, "WATCHDOG"),
+ MTK_FUNCTION(7, "DBG_MON_A4")
+ ),
+ MTK_PIN(
+ 18, "GPIO18",
+ MTK_EINT_FUNCTION(0, 18),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO18"),
+ MTK_FUNCTION(1, "WB_CTRL5"),
+ MTK_FUNCTION(3, "C2K_DM_EINT1"),
+ MTK_FUNCTION(7, "DBG_MON_A5")
+ ),
+ MTK_PIN(
+ 19, "GPIO19",
+ MTK_EINT_FUNCTION(0, 19),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO19"),
+ MTK_FUNCTION(1, "ANT_SEL0"),
+ MTK_FUNCTION(2, "IRTX_OUT"),
+ MTK_FUNCTION(3, "IRDA_TX"),
+ MTK_FUNCTION(4, "C2K_UART0_TXD"),
+ MTK_FUNCTION(5, "GPS_FRAME_SYNC"),
+ MTK_FUNCTION(6, "LTE_UTXD"),
+ MTK_FUNCTION(7, "DBG_MON_A6")
+ ),
+ MTK_PIN(
+ 20, "GPIO20",
+ MTK_EINT_FUNCTION(0, 20),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO20"),
+ MTK_FUNCTION(1, "ANT_SEL1"),
+ MTK_FUNCTION(2, "C2K_UIM1_HOT_PLUG_IN"),
+ MTK_FUNCTION(3, "IRDA_RX"),
+ MTK_FUNCTION(4, "C2K_UART0_RXD"),
+ MTK_FUNCTION(5, "MD_EINT2"),
+ MTK_FUNCTION(6, "LTE_URXD"),
+ MTK_FUNCTION(7, "DBG_MON_A7")
+ ),
+ MTK_PIN(
+ 21, "GPIO21",
+ MTK_EINT_FUNCTION(0, 21),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO21"),
+ MTK_FUNCTION(1, "ANT_SEL2"),
+ MTK_FUNCTION(2, "PWM2"),
+ MTK_FUNCTION(3, "IRDA_PDN"),
+ MTK_FUNCTION(4, "CORESONIC_SWCK"),
+ MTK_FUNCTION(5, "MD_EINT1"),
+ MTK_FUNCTION(6, "C2K_UIM0_HOT_PLUG_IN"),
+ MTK_FUNCTION(7, "DBG_MON_A8")
+ ),
+ MTK_PIN(
+ 22, "GPIO22",
+ MTK_EINT_FUNCTION(0, 22),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO22"),
+ MTK_FUNCTION(1, "RDN0")
+ ),
+ MTK_PIN(
+ 23, "GPIO23",
+ MTK_EINT_FUNCTION(0, 23),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO23"),
+ MTK_FUNCTION(1, "RDP0")
+ ),
+ MTK_PIN(
+ 24, "GPIO24",
+ MTK_EINT_FUNCTION(0, 24),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO24"),
+ MTK_FUNCTION(1, "RDN1")
+ ),
+ MTK_PIN(
+ 25, "GPIO25",
+ MTK_EINT_FUNCTION(0, 25),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO25"),
+ MTK_FUNCTION(1, "RDP1")
+ ),
+ MTK_PIN(
+ 26, "GPIO26",
+ MTK_EINT_FUNCTION(0, 26),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO26"),
+ MTK_FUNCTION(1, "RCN")
+ ),
+ MTK_PIN(
+ 27, "GPIO27",
+ MTK_EINT_FUNCTION(0, 27),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO27"),
+ MTK_FUNCTION(1, "RCP")
+ ),
+ MTK_PIN(
+ 28, "GPIO28",
+ MTK_EINT_FUNCTION(0, 28),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO28"),
+ MTK_FUNCTION(1, "RDN2")
+ ),
+ MTK_PIN(
+ 29, "GPIO29",
+ MTK_EINT_FUNCTION(0, 29),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO29"),
+ MTK_FUNCTION(1, "RDP2")
+ ),
+ MTK_PIN(
+ 30, "GPIO30",
+ MTK_EINT_FUNCTION(0, 30),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO30"),
+ MTK_FUNCTION(1, "RDN3")
+ ),
+ MTK_PIN(
+ 31, "GPIO31",
+ MTK_EINT_FUNCTION(0, 31),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO31"),
+ MTK_FUNCTION(1, "RDP3")
+ ),
+ MTK_PIN(
+ 32, "GPIO32",
+ MTK_EINT_FUNCTION(0, 32),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO32"),
+ MTK_FUNCTION(1, "RDN0_A"),
+ MTK_FUNCTION(2, "CMHSYNC"),
+ MTK_FUNCTION(3, "CMCSD0")
+ ),
+ MTK_PIN(
+ 33, "GPIO33",
+ MTK_EINT_FUNCTION(0, 33),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO33"),
+ MTK_FUNCTION(1, "RDP0_A"),
+ MTK_FUNCTION(2, "CMVSYNC"),
+ MTK_FUNCTION(3, "CMCSD1")
+ ),
+ MTK_PIN(
+ 34, "GPIO34",
+ MTK_EINT_FUNCTION(0, 34),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO34"),
+ MTK_FUNCTION(1, "RDN1_A"),
+ MTK_FUNCTION(2, "CMDAT9"),
+ MTK_FUNCTION(3, "CMCSD2")
+ ),
+ MTK_PIN(
+ 35, "GPIO35",
+ MTK_EINT_FUNCTION(0, 35),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO35"),
+ MTK_FUNCTION(1, "RDP1_A"),
+ MTK_FUNCTION(2, "CMDAT8"),
+ MTK_FUNCTION(3, "CMCSD3")
+ ),
+ MTK_PIN(
+ 36, "GPIO36",
+ MTK_EINT_FUNCTION(0, 36),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO36"),
+ MTK_FUNCTION(1, "RCN_A"),
+ MTK_FUNCTION(2, "CMDAT7")
+ ),
+ MTK_PIN(
+ 37, "GPIO37",
+ MTK_EINT_FUNCTION(0, 37),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO37"),
+ MTK_FUNCTION(1, "RCP_A"),
+ MTK_FUNCTION(2, "CMDAT6")
+ ),
+ MTK_PIN(
+ 38, "GPIO38",
+ MTK_EINT_FUNCTION(0, 38),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO38"),
+ MTK_FUNCTION(1, "RDN2_A"),
+ MTK_FUNCTION(2, "CMDAT5")
+ ),
+ MTK_PIN(
+ 39, "GPIO39",
+ MTK_EINT_FUNCTION(0, 39),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO39"),
+ MTK_FUNCTION(1, "RDP2_A"),
+ MTK_FUNCTION(2, "CMDAT4")
+ ),
+ MTK_PIN(
+ 40, "GPIO40",
+ MTK_EINT_FUNCTION(0, 40),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO40"),
+ MTK_FUNCTION(1, "RDN3_A"),
+ MTK_FUNCTION(2, "CMDAT3")
+ ),
+ MTK_PIN(
+ 41, "GPIO41",
+ MTK_EINT_FUNCTION(0, 41),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO41"),
+ MTK_FUNCTION(1, "RDP3_A"),
+ MTK_FUNCTION(2, "CMDAT2")
+ ),
+ MTK_PIN(
+ 42, "GPIO42",
+ MTK_EINT_FUNCTION(0, 42),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO42"),
+ MTK_FUNCTION(1, "CMDAT0"),
+ MTK_FUNCTION(2, "CMCSD0"),
+ MTK_FUNCTION(3, "CMMCLK1"),
+ MTK_FUNCTION(5, "ANT_SEL5"),
+ MTK_FUNCTION(6, "CLKM5"),
+ MTK_FUNCTION(7, "DBG_MON_A9")
+ ),
+ MTK_PIN(
+ 43, "GPIO43",
+ MTK_EINT_FUNCTION(0, 43),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO43"),
+ MTK_FUNCTION(1, "CMDAT1"),
+ MTK_FUNCTION(2, "CMCSD1"),
+ MTK_FUNCTION(3, "CMFLASH"),
+ MTK_FUNCTION(4, "MD_EINT0"),
+ MTK_FUNCTION(5, "CMMCLK1"),
+ MTK_FUNCTION(6, "CLKM4"),
+ MTK_FUNCTION(7, "DBG_MON_A10")
+ ),
+ MTK_PIN(
+ 44, "GPIO44",
+ MTK_EINT_FUNCTION(0, 44),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO44"),
+ MTK_FUNCTION(1, "CMPCLK"),
+ MTK_FUNCTION(2, "CMCSK"),
+ MTK_FUNCTION(3, "CMCSD2"),
+ MTK_FUNCTION(4, "KCOL3"),
+ MTK_FUNCTION(5, "SRCLKENAI2"),
+ MTK_FUNCTION(6, "PWM0"),
+ MTK_FUNCTION(7, "DBG_MON_A11")
+ ),
+ MTK_PIN(
+ 45, "GPIO45",
+ MTK_EINT_FUNCTION(0, 45),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO45"),
+ MTK_FUNCTION(1, "CMMCLK0"),
+ MTK_FUNCTION(7, "DBG_MON_A12")
+ ),
+ MTK_PIN(
+ 46, "GPIO46",
+ MTK_EINT_FUNCTION(0, 46),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO46"),
+ MTK_FUNCTION(1, "CMMCLK1"),
+ MTK_FUNCTION(2, "IDDIG"),
+ MTK_FUNCTION(3, "LTE_MD32_JTAG_TRST"),
+ MTK_FUNCTION(4, "TDD_TRSTN"),
+ MTK_FUNCTION(5, "DM_JTINTP"),
+ MTK_FUNCTION(6, "KCOL6"),
+ MTK_FUNCTION(7, "DBG_MON_A13")
+ ),
+ MTK_PIN(
+ 47, "GPIO47",
+ MTK_EINT_FUNCTION(0, 47),
+ DRV_FIXED,
+ MTK_FUNCTION(0, "GPIO47"),
+ MTK_FUNCTION(1, "SDA0")
+ ),
+ MTK_PIN(
+ 48, "GPIO48",
+ MTK_EINT_FUNCTION(0, 48),
+ DRV_FIXED,
+ MTK_FUNCTION(0, "GPIO48"),
+ MTK_FUNCTION(1, "SCL0")
+ ),
+ MTK_PIN(
+ 49, "GPIO49",
+ MTK_EINT_FUNCTION(0, 49),
+ DRV_FIXED,
+ MTK_FUNCTION(0, "GPIO49"),
+ MTK_FUNCTION(1, "SDA1")
+ ),
+ MTK_PIN(
+ 50, "GPIO50",
+ MTK_EINT_FUNCTION(0, 50),
+ DRV_FIXED,
+ MTK_FUNCTION(0, "GPIO50"),
+ MTK_FUNCTION(1, "SCL1")
+ ),
+ MTK_PIN(
+ 51, "GPIO51",
+ MTK_EINT_FUNCTION(0, 51),
+ DRV_FIXED,
+ MTK_FUNCTION(0, "GPIO51"),
+ MTK_FUNCTION(1, "SDA2")
+ ),
+ MTK_PIN(
+ 52, "GPIO52",
+ MTK_EINT_FUNCTION(0, 52),
+ DRV_FIXED,
+ MTK_FUNCTION(0, "GPIO52"),
+ MTK_FUNCTION(1, "SCL2")
+ ),
+ MTK_PIN(
+ 53, "GPIO53",
+ MTK_EINT_FUNCTION(0, 53),
+ DRV_FIXED,
+ MTK_FUNCTION(0, "GPIO53"),
+ MTK_FUNCTION(1, "SDA3"),
+ MTK_FUNCTION(3, "IDDIG"),
+ MTK_FUNCTION(5, "MD_EINT2"),
+ MTK_FUNCTION(6, "C2K_UIM1_HOT_PLUG_IN")
+ ),
+ MTK_PIN(
+ 54, "GPIO54",
+ MTK_EINT_FUNCTION(0, 54),
+ DRV_FIXED,
+ MTK_FUNCTION(0, "GPIO54"),
+ MTK_FUNCTION(1, "SCL3"),
+ MTK_FUNCTION(3, "IDDIG"),
+ MTK_FUNCTION(5, "MD_EINT1"),
+ MTK_FUNCTION(6, "C2K_UIM0_HOT_PLUG_IN")
+ ),
+ MTK_PIN(
+ 55, "GPIO55",
+ MTK_EINT_FUNCTION(0, 55),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO55"),
+ MTK_FUNCTION(1, "SRCLKENAI0"),
+ MTK_FUNCTION(2, "PWM2"),
+ MTK_FUNCTION(3, "CLKM5"),
+ MTK_FUNCTION(4, "CORESONIC_SWD"),
+ MTK_FUNCTION(5, "ANT_SEL6"),
+ MTK_FUNCTION(6, "KROW5"),
+ MTK_FUNCTION(7, "DISP_PWM")
+ ),
+ MTK_PIN(
+ 56, "GPIO56",
+ MTK_EINT_FUNCTION(0, 56),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO56"),
+ MTK_FUNCTION(1, "SRCLKENA1")
+ ),
+ MTK_PIN(
+ 57, "GPIO57",
+ MTK_EINT_FUNCTION(0, 57),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO57"),
+ MTK_FUNCTION(1, "URXD2"),
+ MTK_FUNCTION(2, "DPI_HSYNC0"),
+ MTK_FUNCTION(3, "UTXD2"),
+ MTK_FUNCTION(4, "MD_URXD"),
+ MTK_FUNCTION(5, "SRCLKENAI1"),
+ MTK_FUNCTION(6, "KROW4"),
+ MTK_FUNCTION(7, "DBG_MON_A14")
+ ),
+ MTK_PIN(
+ 58, "GPIO58",
+ MTK_EINT_FUNCTION(0, 58),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO58"),
+ MTK_FUNCTION(1, "UTXD2"),
+ MTK_FUNCTION(2, "DPI_VSYNC0"),
+ MTK_FUNCTION(3, "URXD2"),
+ MTK_FUNCTION(4, "MD_UTXD"),
+ MTK_FUNCTION(5, "TDD_TXD"),
+ MTK_FUNCTION(6, "KROW5"),
+ MTK_FUNCTION(7, "DBG_MON_A15")
+ ),
+ MTK_PIN(
+ 59, "GPIO59",
+ MTK_EINT_FUNCTION(0, 59),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO59"),
+ MTK_FUNCTION(1, "URXD3"),
+ MTK_FUNCTION(2, "DPI_CK0"),
+ MTK_FUNCTION(3, "UTXD3"),
+ MTK_FUNCTION(4, "UCTS2"),
+ MTK_FUNCTION(5, "PWM3"),
+ MTK_FUNCTION(6, "KROW6"),
+ MTK_FUNCTION(7, "DBG_MON_A16")
+ ),
+ MTK_PIN(
+ 60, "GPIO60",
+ MTK_EINT_FUNCTION(0, 60),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO60"),
+ MTK_FUNCTION(1, "UTXD3"),
+ MTK_FUNCTION(2, "DPI_DE0"),
+ MTK_FUNCTION(3, "URXD3"),
+ MTK_FUNCTION(4, "URTS2"),
+ MTK_FUNCTION(5, "PWM4"),
+ MTK_FUNCTION(6, "KROW7"),
+ MTK_FUNCTION(7, "DBG_MON_A17")
+ ),
+ MTK_PIN(
+ 61, "GPIO61",
+ MTK_EINT_FUNCTION(0, 61),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO61"),
+ MTK_FUNCTION(1, "PCM1_CLK"),
+ MTK_FUNCTION(2, "DPI_D0"),
+ MTK_FUNCTION(3, "I2S0_BCK"),
+ MTK_FUNCTION(4, "KROW4"),
+ MTK_FUNCTION(5, "ANT_SEL3"),
+ MTK_FUNCTION(6, "IRTX_OUT"),
+ MTK_FUNCTION(7, "DBG_MON_A18")
+ ),
+ MTK_PIN(
+ 62, "GPIO62",
+ MTK_EINT_FUNCTION(0, 62),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO62"),
+ MTK_FUNCTION(1, "PCM1_SYNC"),
+ MTK_FUNCTION(2, "DPI_D1"),
+ MTK_FUNCTION(3, "I2S0_LRCK"),
+ MTK_FUNCTION(4, "KCOL7"),
+ MTK_FUNCTION(5, "CLKM3"),
+ MTK_FUNCTION(6, "CMFLASH"),
+ MTK_FUNCTION(7, "DBG_MON_A19")
+ ),
+ MTK_PIN(
+ 63, "GPIO63",
+ MTK_EINT_FUNCTION(0, 63),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO63"),
+ MTK_FUNCTION(1, "PCM1_DI"),
+ MTK_FUNCTION(2, "DPI_D2"),
+ MTK_FUNCTION(3, "I2S0_DI"),
+ MTK_FUNCTION(4, "PCM1_DO0"),
+ MTK_FUNCTION(5, "CLKM5"),
+ MTK_FUNCTION(6, "KROW3"),
+ MTK_FUNCTION(7, "DBG_MON_A20")
+ ),
+ MTK_PIN(
+ 64, "GPIO64",
+ MTK_EINT_FUNCTION(0, 64),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO64"),
+ MTK_FUNCTION(1, "PCM1_DO0"),
+ MTK_FUNCTION(2, "DPI_D3"),
+ MTK_FUNCTION(3, "I2S0_MCK"),
+ MTK_FUNCTION(4, "PCM1_DI"),
+ MTK_FUNCTION(5, "SRCLKENAI2"),
+ MTK_FUNCTION(6, "KCOL5"),
+ MTK_FUNCTION(7, "DBG_MON_A21")
+ ),
+ MTK_PIN(
+ 65, "GPIO65",
+ MTK_EINT_FUNCTION(0, 65),
+ DRV_GRP0,
+ MTK_FUNCTION(0, "GPIO65"),
+ MTK_FUNCTION(1, "SPI_CSA"),
+ MTK_FUNCTION(2, "EXT_FRAME_SYNC"),
+ MTK_FUNCTION(3, "I2S3_MCK"),
+ MTK_FUNCTION(4, "KROW2"),
+ MTK_FUNCTION(5, "GPS_FRAME_SYNC"),
+ MTK_FUNCTION(6, "PTA_RXD"),
+ MTK_FUNCTION(7, "DBG_MON_A22")
+ ),
+ MTK_PIN(
+ 66, "GPIO66",
+ MTK_EINT_FUNCTION(0, 66),
+ DRV_GRP0,
+ MTK_FUNCTION(0, "GPIO66"),
+ MTK_FUNCTION(1, "SPI_CKA"),
+ MTK_FUNCTION(2, "USB_DRVVBUS"),
+ MTK_FUNCTION(3, "I2S3_BCK"),
+ MTK_FUNCTION(4, "KCOL2"),
+ MTK_FUNCTION(6, "PTA_TXD"),
+ MTK_FUNCTION(7, "DBG_MON_A23")
+ ),
+ MTK_PIN(
+ 67, "GPIO67",
+ MTK_EINT_FUNCTION(0, 67),
+ DRV_GRP0,
+ MTK_FUNCTION(0, "GPIO67"),
+ MTK_FUNCTION(1, "SPI_MIA"),
+ MTK_FUNCTION(2, "SPI_MOA"),
+ MTK_FUNCTION(3, "I2S3_DO"),
+ MTK_FUNCTION(4, "PTA_RXD"),
+ MTK_FUNCTION(5, "IDDIG"),
+ MTK_FUNCTION(6, "UCTS1"),
+ MTK_FUNCTION(7, "DBG_MON_A24")
+ ),
+ MTK_PIN(
+ 68, "GPIO68",
+ MTK_EINT_FUNCTION(0, 68),
+ DRV_GRP0,
+ MTK_FUNCTION(0, "GPIO68"),
+ MTK_FUNCTION(1, "SPI_MOA"),
+ MTK_FUNCTION(2, "SPI_MIA"),
+ MTK_FUNCTION(3, "I2S3_LRCK"),
+ MTK_FUNCTION(4, "PTA_TXD"),
+ MTK_FUNCTION(5, "ANT_SEL4"),
+ MTK_FUNCTION(6, "URTS1"),
+ MTK_FUNCTION(7, "DBG_MON_A25")
+ ),
+ MTK_PIN(
+ 69, "GPIO69",
+ MTK_EINT_FUNCTION(0, 69),
+ DRV_GRP0,
+ MTK_FUNCTION(0, "GPIO69"),
+ MTK_FUNCTION(1, "DISP_PWM"),
+ MTK_FUNCTION(2, "PWM1"),
+ MTK_FUNCTION(3, "LTE_MD32_JTAG_TRST"),
+ MTK_FUNCTION(4, "TDD_TRSTN"),
+ MTK_FUNCTION(5, "ANT_SEL7"),
+ MTK_FUNCTION(6, "DM_JTINTP")
+ ),
+ MTK_PIN(
+ 70, "GPIO70",
+ MTK_EINT_FUNCTION(0, 70),
+ DRV_GRP0,
+ MTK_FUNCTION(0, "GPIO70"),
+ MTK_FUNCTION(1, "JTMS"),
+ MTK_FUNCTION(2, "CONN_MCU_TMS"),
+ MTK_FUNCTION(3, "LTE_MD32_JTAG_TMS"),
+ MTK_FUNCTION(4, "TDD_TMS"),
+ MTK_FUNCTION(5, "CORESONIC_SWD"),
+ MTK_FUNCTION(6, "DM_OTMS"),
+ MTK_FUNCTION(7, "DFD_TMS")
+ ),
+ MTK_PIN(
+ 71, "GPIO71",
+ MTK_EINT_FUNCTION(0, 71),
+ DRV_GRP0,
+ MTK_FUNCTION(0, "GPIO71"),
+ MTK_FUNCTION(1, "JTCK"),
+ MTK_FUNCTION(2, "CONN_MCU_TCK[1]"),
+ MTK_FUNCTION(3, "LTE_MD32_JTAG_TCK"),
+ MTK_FUNCTION(4, "TDD_TCK"),
+ MTK_FUNCTION(5, "CORESONIC_SWCK"),
+ MTK_FUNCTION(6, "DM_OTCK"),
+ MTK_FUNCTION(7, "DFD_TCK_XI")
+ ),
+ MTK_PIN(
+ 72, "GPIO72",
+ MTK_EINT_FUNCTION(0, 72),
+ DRV_GRP0,
+ MTK_FUNCTION(0, "GPIO72"),
+ MTK_FUNCTION(1, "JTDI"),
+ MTK_FUNCTION(2, "CONN_MCU_TDI"),
+ MTK_FUNCTION(3, "LTE_MD32_JTAG_TDI"),
+ MTK_FUNCTION(4, "TDD_TDI"),
+ MTK_FUNCTION(6, "DM_OTDI"),
+ MTK_FUNCTION(7, "DFD_TDI")
+ ),
+ MTK_PIN(
+ 73, "GPIO73",
+ MTK_EINT_FUNCTION(0, 73),
+ DRV_GRP0,
+ MTK_FUNCTION(0, "GPIO73"),
+ MTK_FUNCTION(1, "JTDO"),
+ MTK_FUNCTION(2, "CONN_MCU_TDO"),
+ MTK_FUNCTION(3, "LTE_MD32_JTAG_TDO"),
+ MTK_FUNCTION(4, "TDD_TDO"),
+ MTK_FUNCTION(6, "DM_OTDO"),
+ MTK_FUNCTION(7, "DFD_TDO")
+ ),
+ MTK_PIN(
+ 74, "GPIO74",
+ MTK_EINT_FUNCTION(0, 74),
+ DRV_GRP0,
+ MTK_FUNCTION(0, "GPIO74"),
+ MTK_FUNCTION(1, "URXD0"),
+ MTK_FUNCTION(2, "UTXD0"),
+ MTK_FUNCTION(3, "MD_URXD"),
+ MTK_FUNCTION(4, "SDA3"),
+ MTK_FUNCTION(5, "C2K_UART0_RXD"),
+ MTK_FUNCTION(6, "LTE_URXD"),
+ MTK_FUNCTION(7, "AUXIF_ST")
+ ),
+ MTK_PIN(
+ 75, "GPIO75",
+ MTK_EINT_FUNCTION(0, 75),
+ DRV_GRP0,
+ MTK_FUNCTION(0, "GPIO75"),
+ MTK_FUNCTION(1, "UTXD0"),
+ MTK_FUNCTION(2, "URXD0"),
+ MTK_FUNCTION(3, "MD_UTXD"),
+ MTK_FUNCTION(4, "TDD_TXD"),
+ MTK_FUNCTION(5, "C2K_UART0_TXD"),
+ MTK_FUNCTION(6, "LTE_UTXD")
+ ),
+ MTK_PIN(
+ 76, "GPIO76",
+ MTK_EINT_FUNCTION(0, 76),
+ DRV_GRP0,
+ MTK_FUNCTION(0, "GPIO76"),
+ MTK_FUNCTION(1, "URXD1"),
+ MTK_FUNCTION(2, "UTXD1"),
+ MTK_FUNCTION(3, "MD_URXD"),
+ MTK_FUNCTION(4, "SCL3"),
+ MTK_FUNCTION(5, "LTE_URXD"),
+ MTK_FUNCTION(6, "C2K_UART0_RXD"),
+ MTK_FUNCTION(7, "AUXIF_CLK")
+ ),
+ MTK_PIN(
+ 77, "GPIO77",
+ MTK_EINT_FUNCTION(0, 77),
+ DRV_GRP0,
+ MTK_FUNCTION(0, "GPIO77"),
+ MTK_FUNCTION(1, "UTXD1"),
+ MTK_FUNCTION(2, "URXD1"),
+ MTK_FUNCTION(3, "MD_UTXD"),
+ MTK_FUNCTION(4, "TDD_TXD"),
+ MTK_FUNCTION(5, "LTE_UTXD"),
+ MTK_FUNCTION(6, "C2K_UART0_TXD")
+ ),
+ MTK_PIN(
+ 78, "GPIO78",
+ MTK_EINT_FUNCTION(0, 78),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO78"),
+ MTK_FUNCTION(1, "I2S0_DI"),
+ MTK_FUNCTION(2, "PCM1_DI"),
+ MTK_FUNCTION(3, "I2S3_DO"),
+ MTK_FUNCTION(4, "I2S1_DO"),
+ MTK_FUNCTION(5, "PWM0"),
+ MTK_FUNCTION(6, "I2S2_DI"),
+ MTK_FUNCTION(7, "DBG_MON_A26")
+ ),
+ MTK_PIN(
+ 79, "GPIO79",
+ MTK_EINT_FUNCTION(0, 79),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO79"),
+ MTK_FUNCTION(1, "I2S0_LRCK"),
+ MTK_FUNCTION(2, "PCM1_SYNC"),
+ MTK_FUNCTION(3, "I2S3_LRCK"),
+ MTK_FUNCTION(4, "I2S1_LRCK"),
+ MTK_FUNCTION(5, "PWM3"),
+ MTK_FUNCTION(6, "I2S2_LRCK"),
+ MTK_FUNCTION(7, "DBG_MON_A27")
+ ),
+ MTK_PIN(
+ 80, "GPIO80",
+ MTK_EINT_FUNCTION(0, 80),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO80"),
+ MTK_FUNCTION(1, "I2S0_BCK"),
+ MTK_FUNCTION(2, "PCM1_CLK[1]"),
+ MTK_FUNCTION(3, "I2S3_BCK"),
+ MTK_FUNCTION(4, "I2S1_BCK"),
+ MTK_FUNCTION(5, "PWM4"),
+ MTK_FUNCTION(6, "I2S2_BCK"),
+ MTK_FUNCTION(7, "DBG_MON_A28")
+ ),
+ MTK_PIN(
+ 81, "GPIO81",
+ MTK_EINT_FUNCTION(0, 81),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO81"),
+ MTK_FUNCTION(1, "KROW0"),
+ MTK_FUNCTION(3, "CONN_MCU_DBGI_N"),
+ MTK_FUNCTION(4, "CORESONIC_SWCK"),
+ MTK_FUNCTION(5, "C2K_TCK"),
+ MTK_FUNCTION(7, "C2K_DM_EINT1")
+ ),
+ MTK_PIN(
+ 82, "GPIO82",
+ MTK_EINT_FUNCTION(0, 82),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO82"),
+ MTK_FUNCTION(1, "KROW1"),
+ MTK_FUNCTION(3, "CONN_MCU_TRST_B"),
+ MTK_FUNCTION(4, "CORESONIC_SWD"),
+ MTK_FUNCTION(5, "C2K_NTRST"),
+ MTK_FUNCTION(6, "USB_DRVVBUS"),
+ MTK_FUNCTION(7, "C2K_DM_EINT2")
+ ),
+ MTK_PIN(
+ 83, "GPIO83",
+ MTK_EINT_FUNCTION(0, 83),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO83"),
+ MTK_FUNCTION(1, "KROW2"),
+ MTK_FUNCTION(2, "USB_DRVVBUS"),
+ MTK_FUNCTION(5, "C2K_TDI"),
+ MTK_FUNCTION(7, "C2K_DM_EINT3")
+ ),
+ MTK_PIN(
+ 84, "GPIO84",
+ MTK_EINT_FUNCTION(0, 84),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO84"),
+ MTK_FUNCTION(1, "KCOL0"),
+ MTK_FUNCTION(2, "URTS0"),
+ MTK_FUNCTION(3, "CONN_MCU_DBGACK_N"),
+ MTK_FUNCTION(4, "SCL2"),
+ MTK_FUNCTION(5, "C2K_TDO"),
+ MTK_FUNCTION(6, "AUXIF_CLK")
+ ),
+ MTK_PIN(
+ 85, "GPIO85",
+ MTK_EINT_FUNCTION(0, 85),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO85"),
+ MTK_FUNCTION(1, "KCOL1"),
+ MTK_FUNCTION(2, "UCTS0"),
+ MTK_FUNCTION(3, "UCTS1"),
+ MTK_FUNCTION(4, "SDA2"),
+ MTK_FUNCTION(5, "C2K_TMS"),
+ MTK_FUNCTION(6, "AUXIF_ST"),
+ MTK_FUNCTION(7, "DBG_MON_A31")
+ ),
+ MTK_PIN(
+ 86, "GPIO86",
+ MTK_EINT_FUNCTION(0, 86),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO86"),
+ MTK_FUNCTION(1, "KCOL2"),
+ MTK_FUNCTION(3, "URTS1"),
+ MTK_FUNCTION(5, "C2K_RTCK"),
+ MTK_FUNCTION(7, "DBG_MON_A32")
+ ),
+ MTK_PIN(
+ 87, "GPIO87",
+ MTK_EINT_FUNCTION(0, 87),
+ DRV_GRP0,
+ MTK_FUNCTION(0, "GPIO87"),
+ MTK_FUNCTION(1, "BPI_BUS5"),
+ MTK_FUNCTION(2, "LTE_C2K_BPI_BUS5"),
+ MTK_FUNCTION(5, "C2K_BPI_BUS5"),
+ MTK_FUNCTION(7, "DBG_MON_B0")
+ ),
+ MTK_PIN(
+ 88, "GPIO88",
+ MTK_EINT_FUNCTION(0, 88),
+ DRV_GRP0,
+ MTK_FUNCTION(0, "GPIO88"),
+ MTK_FUNCTION(1, "BPI_BUS6"),
+ MTK_FUNCTION(2, "LTE_C2K_BPI_BUS6"),
+ MTK_FUNCTION(5, "C2K_BPI_BUS6"),
+ MTK_FUNCTION(7, "DBG_MON_B1")
+ ),
+ MTK_PIN(
+ 89, "GPIO89",
+ MTK_EINT_FUNCTION(0, 89),
+ DRV_GRP0,
+ MTK_FUNCTION(0, "GPIO89"),
+ MTK_FUNCTION(1, "BPI_BUS7"),
+ MTK_FUNCTION(2, "LTE_C2K_BPI_BUS7"),
+ MTK_FUNCTION(3, "CLKM0"),
+ MTK_FUNCTION(5, "C2K_BPI_BUS7"),
+ MTK_FUNCTION(7, "DBG_MON_B2")
+ ),
+ MTK_PIN(
+ 90, "GPIO90",
+ MTK_EINT_FUNCTION(0, 90),
+ DRV_GRP0,
+ MTK_FUNCTION(0, "GPIO90"),
+ MTK_FUNCTION(1, "BPI_BUS8"),
+ MTK_FUNCTION(2, "LTE_C2K_BPI_BUS8"),
+ MTK_FUNCTION(3, "CLKM1"),
+ MTK_FUNCTION(5, "C2K_BPI_BUS8"),
+ MTK_FUNCTION(7, "DBG_MON_B3")
+ ),
+ MTK_PIN(
+ 91, "GPIO91",
+ MTK_EINT_FUNCTION(0, 91),
+ DRV_GRP0,
+ MTK_FUNCTION(0, "GPIO91"),
+ MTK_FUNCTION(1, "BPI_BUS9"),
+ MTK_FUNCTION(2, "LTE_C2K_BPI_BUS9"),
+ MTK_FUNCTION(3, "CLKM2"),
+ MTK_FUNCTION(5, "C2K_BPI_BUS9"),
+ MTK_FUNCTION(7, "DBG_MON_B4")
+ ),
+ MTK_PIN(
+ 92, "GPIO92",
+ MTK_EINT_FUNCTION(0, 92),
+ DRV_GRP0,
+ MTK_FUNCTION(0, "GPIO92"),
+ MTK_FUNCTION(1, "BPI_BUS10"),
+ MTK_FUNCTION(2, "LTE_C2K_BPI_BUS10"),
+ MTK_FUNCTION(3, "CLKM3"),
+ MTK_FUNCTION(5, "C2K_BPI_BUS10"),
+ MTK_FUNCTION(7, "DBG_MON_B5")
+ ),
+ MTK_PIN(
+ 93, "GPIO93",
+ MTK_EINT_FUNCTION(0, 93),
+ DRV_GRP0,
+ MTK_FUNCTION(0, "GPIO93"),
+ MTK_FUNCTION(1, "BPI_BUS11"),
+ MTK_FUNCTION(2, "LTE_C2K_BPI_BUS11"),
+ MTK_FUNCTION(5, "C2K_BPI_BUS11"),
+ MTK_FUNCTION(7, "DBG_MON_B6")
+ ),
+ MTK_PIN(
+ 94, "GPIO94",
+ MTK_EINT_FUNCTION(0, 94),
+ DRV_GRP0,
+ MTK_FUNCTION(0, "GPIO94"),
+ MTK_FUNCTION(1, "BPI_BUS12"),
+ MTK_FUNCTION(2, "LTE_C2K_BPI_BUS12"),
+ MTK_FUNCTION(5, "C2K_BPI_BUS12"),
+ MTK_FUNCTION(7, "DBG_MON_B7")
+ ),
+ MTK_PIN(
+ 95, "GPIO95",
+ MTK_EINT_FUNCTION(0, 95),
+ DRV_GRP0,
+ MTK_FUNCTION(0, "GPIO95"),
+ MTK_FUNCTION(1, "BPI_BUS13"),
+ MTK_FUNCTION(2, "LTE_C2K_BPI_BUS13"),
+ MTK_FUNCTION(5, "C2K_BPI_BUS13"),
+ MTK_FUNCTION(7, "DBG_MON_B8")
+ ),
+ MTK_PIN(
+ 96, "GPIO96",
+ MTK_EINT_FUNCTION(0, 96),
+ DRV_GRP0,
+ MTK_FUNCTION(0, "GPIO96"),
+ MTK_FUNCTION(1, "BPI_BUS14"),
+ MTK_FUNCTION(2, "LTE_C2K_BPI_BUS14"),
+ MTK_FUNCTION(5, "C2K_BPI_BUS14"),
+ MTK_FUNCTION(7, "DBG_MON_B9")
+ ),
+ MTK_PIN(
+ 97, "GPIO97",
+ MTK_EINT_FUNCTION(0, 97),
+ DRV_GRP0,
+ MTK_FUNCTION(0, "GPIO97"),
+ MTK_FUNCTION(1, "BPI_BUS15"),
+ MTK_FUNCTION(2, "LTE_C2K_BPI_BUS15"),
+ MTK_FUNCTION(5, "C2K_BPI_BUS15"),
+ MTK_FUNCTION(7, "DBG_MON_B10")
+ ),
+ MTK_PIN(
+ 98, "GPIO98",
+ MTK_EINT_FUNCTION(0, 98),
+ DRV_GRP0,
+ MTK_FUNCTION(0, "GPIO98"),
+ MTK_FUNCTION(1, "BPI_BUS16"),
+ MTK_FUNCTION(2, "LTE_C2K_BPI_BUS16"),
+ MTK_FUNCTION(5, "C2K_BPI_BUS16"),
+ MTK_FUNCTION(7, "DBG_MON_B11")
+ ),
+ MTK_PIN(
+ 99, "GPIO99",
+ MTK_EINT_FUNCTION(0, 99),
+ DRV_GRP0,
+ MTK_FUNCTION(0, "GPIO99"),
+ MTK_FUNCTION(1, "BPI_BUS17"),
+ MTK_FUNCTION(2, "LTE_C2K_BPI_BUS17"),
+ MTK_FUNCTION(5, "C2K_BPI_BUS17"),
+ MTK_FUNCTION(7, "DBG_MON_B12")
+ ),
+ MTK_PIN(
+ 100, "GPIO100",
+ MTK_EINT_FUNCTION(0, 100),
+ DRV_GRP0,
+ MTK_FUNCTION(0, "GPIO100"),
+ MTK_FUNCTION(1, "BPI_BUS18"),
+ MTK_FUNCTION(2, "LTE_C2K_BPI_BUS18"),
+ MTK_FUNCTION(5, "C2K_BPI_BUS18"),
+ MTK_FUNCTION(7, "DBG_MON_B13")
+ ),
+ MTK_PIN(
+ 101, "GPIO101",
+ MTK_EINT_FUNCTION(0, 101),
+ DRV_GRP0,
+ MTK_FUNCTION(0, "GPIO101"),
+ MTK_FUNCTION(1, "BPI_BUS19"),
+ MTK_FUNCTION(2, "LTE_C2K_BPI_BUS19"),
+ MTK_FUNCTION(5, "C2K_BPI_BUS19"),
+ MTK_FUNCTION(7, "DBG_MON_B14")
+ ),
+ MTK_PIN(
+ 102, "GPIO102",
+ MTK_EINT_FUNCTION(0, 102),
+ DRV_GRP0,
+ MTK_FUNCTION(0, "GPIO102"),
+ MTK_FUNCTION(1, "BPI_BUS20"),
+ MTK_FUNCTION(2, "LTE_C2K_BPI_BUS20"),
+ MTK_FUNCTION(5, "C2K_BPI_BUS20"),
+ MTK_FUNCTION(7, "DBG_MON_B15")
+ ),
+ MTK_PIN(
+ 103, "GPIO103",
+ MTK_EINT_FUNCTION(0, 103),
+ DRV_GRP0,
+ MTK_FUNCTION(0, "GPIO103"),
+ MTK_FUNCTION(1, "C2K_TXBPI"),
+ MTK_FUNCTION(7, "DBG_MON_B16")
+ ),
+ MTK_PIN(
+ 104, "GPIO104",
+ MTK_EINT_FUNCTION(0, 104),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO104"),
+ MTK_FUNCTION(1, "RFIC1_BSI_EN"),
+ MTK_FUNCTION(5, "C2K_RX_BSI_EN"),
+ MTK_FUNCTION(7, "DBG_MON_B17")
+ ),
+ MTK_PIN(
+ 105, "GPIO105",
+ MTK_EINT_FUNCTION(0, 105),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO105"),
+ MTK_FUNCTION(1, "RFIC1_BSI_CK"),
+ MTK_FUNCTION(5, "C2K_RX_BSI_CLK"),
+ MTK_FUNCTION(7, "DBG_MON_B18")
+ ),
+ MTK_PIN(
+ 106, "GPIO106",
+ MTK_EINT_FUNCTION(0, 106),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO106"),
+ MTK_FUNCTION(1, "RFIC1_BSI_D0"),
+ MTK_FUNCTION(5, "C2K_RX_BSI_DATA"),
+ MTK_FUNCTION(7, "DBG_MON_B19")
+ ),
+ MTK_PIN(
+ 107, "GPIO107",
+ MTK_EINT_FUNCTION(0, 107),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO107"),
+ MTK_FUNCTION(1, "RFIC1_BSI_D1"),
+ MTK_FUNCTION(5, "C2K_TX_BSI_EN"),
+ MTK_FUNCTION(7, "DBG_MON_B20")
+ ),
+ MTK_PIN(
+ 108, "GPIO108",
+ MTK_EINT_FUNCTION(0, 108),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO108"),
+ MTK_FUNCTION(1, "RFIC1_BSI_D2"),
+ MTK_FUNCTION(5, "C2K_TX_BSI_CLK"),
+ MTK_FUNCTION(7, "DBG_MON_B21")
+ ),
+ MTK_PIN(
+ 109, "GPIO109",
+ MTK_EINT_FUNCTION(0, 109),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO109"),
+ MTK_FUNCTION(5, "C2K_TX_BSI_DATA"),
+ MTK_FUNCTION(7, "DBG_MON_B22")
+ ),
+ MTK_PIN(
+ 110, "GPIO110",
+ MTK_EINT_FUNCTION(0, 110),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO110"),
+ MTK_FUNCTION(1, "RFIC0_BSI_EN"),
+ MTK_FUNCTION(4, "SPM_BSI_EN"),
+ MTK_FUNCTION(7, "DBG_MON_B23")
+ ),
+ MTK_PIN(
+ 111, "GPIO111",
+ MTK_EINT_FUNCTION(0, 111),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO111"),
+ MTK_FUNCTION(1, "RFIC0_BSI_CK"),
+ MTK_FUNCTION(4, "SPM_BSI_CLK"),
+ MTK_FUNCTION(7, "DBG_MON_B24")
+ ),
+ MTK_PIN(
+ 112, "GPIO112",
+ MTK_EINT_FUNCTION(0, 112),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO112"),
+ MTK_FUNCTION(1, "RFIC0_BSI_D2"),
+ MTK_FUNCTION(4, "SPM_BSI_D2"),
+ MTK_FUNCTION(7, "DBG_MON_B25")
+ ),
+ MTK_PIN(
+ 113, "GPIO113",
+ MTK_EINT_FUNCTION(0, 113),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO113"),
+ MTK_FUNCTION(1, "RFIC0_BSI_D1"),
+ MTK_FUNCTION(4, "SPM_BSI_D1"),
+ MTK_FUNCTION(7, "DBG_MON_B26")
+ ),
+ MTK_PIN(
+ 114, "GPIO114",
+ MTK_EINT_FUNCTION(0, 114),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO114"),
+ MTK_FUNCTION(1, "RFIC0_BSI_D0"),
+ MTK_FUNCTION(4, "SPM_BSI_D0"),
+ MTK_FUNCTION(7, "DBG_MON_B27")
+ ),
+ MTK_PIN(
+ 115, "GPIO115",
+ MTK_EINT_FUNCTION(0, 115),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO115"),
+ MTK_FUNCTION(1, "AUXIN0")
+ ),
+ MTK_PIN(
+ 116, "GPIO116",
+ MTK_EINT_FUNCTION(0, 116),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO116"),
+ MTK_FUNCTION(1, "AUXIN1")
+ ),
+ MTK_PIN(
+ 117, "GPIO117",
+ MTK_EINT_FUNCTION(0, 117),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO117"),
+ MTK_FUNCTION(1, "AUXIN2")
+ ),
+ MTK_PIN(
+ 118, "GPIO118",
+ MTK_EINT_FUNCTION(0, 118),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO118"),
+ MTK_FUNCTION(1, "TXBPI")
+ ),
+ MTK_PIN(
+ 119, "GPIO119",
+ MTK_EINT_FUNCTION(0, 119),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO119"),
+ MTK_FUNCTION(1, "BPI_BUS0"),
+ MTK_FUNCTION(7, "DBG_MON_B28")
+ ),
+ MTK_PIN(
+ 120, "GPIO120",
+ MTK_EINT_FUNCTION(0, 120),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO120"),
+ MTK_FUNCTION(1, "BPI_BUS1"),
+ MTK_FUNCTION(7, "DBG_MON_B29")
+ ),
+ MTK_PIN(
+ 121, "GPIO121",
+ MTK_EINT_FUNCTION(0, 121),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO121"),
+ MTK_FUNCTION(1, "BPI_BUS2"),
+ MTK_FUNCTION(7, "DBG_MON_B30")
+ ),
+ MTK_PIN(
+ 122, "GPIO122",
+ MTK_EINT_FUNCTION(0, 122),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO122"),
+ MTK_FUNCTION(1, "BPI_BUS3"),
+ MTK_FUNCTION(7, "DBG_MON_B31")
+ ),
+ MTK_PIN(
+ 123, "GPIO123",
+ MTK_EINT_FUNCTION(0, 123),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO123"),
+ MTK_FUNCTION(1, "BPI_BUS4"),
+ MTK_FUNCTION(7, "DBG_MON_B32")
+ ),
+ MTK_PIN(
+ 124, "GPIO124",
+ MTK_EINT_FUNCTION(0, 124),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO124"),
+ MTK_FUNCTION(1, "BPI_BUS21"),
+ MTK_FUNCTION(5, "DPI_HSYNC1"),
+ MTK_FUNCTION(6, "KCOL2"),
+ MTK_FUNCTION(7, "TDD_TXD")
+ ),
+ MTK_PIN(
+ 125, "GPIO125",
+ MTK_EINT_FUNCTION(0, 125),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO125"),
+ MTK_FUNCTION(1, "BPI_BUS22"),
+ MTK_FUNCTION(5, "DPI_VSYNC1"),
+ MTK_FUNCTION(6, "KROW2"),
+ MTK_FUNCTION(7, "MD_URXD")
+ ),
+ MTK_PIN(
+ 126, "GPIO126",
+ MTK_EINT_FUNCTION(0, 126),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO126"),
+ MTK_FUNCTION(1, "BPI_BUS23"),
+ MTK_FUNCTION(5, "DPI_CK1"),
+ MTK_FUNCTION(6, "I2S2_MCK"),
+ MTK_FUNCTION(7, "MD_UTXD")
+ ),
+ MTK_PIN(
+ 127, "GPIO127",
+ MTK_EINT_FUNCTION(0, 127),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO127"),
+ MTK_FUNCTION(1, "BPI_BUS24"),
+ MTK_FUNCTION(3, "CONN_MCU_DBGI_N"),
+ MTK_FUNCTION(4, "EXT_FRAME_SYNC"),
+ MTK_FUNCTION(5, "DPI_DE1"),
+ MTK_FUNCTION(6, "SRCLKENAI1"),
+ MTK_FUNCTION(7, "URXD0")
+ ),
+ MTK_PIN(
+ 128, "GPIO128",
+ MTK_EINT_FUNCTION(0, 128),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO128"),
+ MTK_FUNCTION(1, "BPI_BUS25"),
+ MTK_FUNCTION(3, "GPS_FRAME_SYNC"),
+ MTK_FUNCTION(5, "I2S2_DI"),
+ MTK_FUNCTION(6, "PTA_RXD"),
+ MTK_FUNCTION(7, "UTXD0")
+ ),
+ MTK_PIN(
+ 129, "GPIO129",
+ MTK_EINT_FUNCTION(0, 129),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO129"),
+ MTK_FUNCTION(1, "BPI_BUS26"),
+ MTK_FUNCTION(2, "DISP_PWM"),
+ MTK_FUNCTION(5, "I2S2_LRCK"),
+ MTK_FUNCTION(6, "PTA_TXD"),
+ MTK_FUNCTION(7, "LTE_URXD")
+ ),
+ MTK_PIN(
+ 130, "GPIO130",
+ MTK_EINT_FUNCTION(0, 130),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO130"),
+ MTK_FUNCTION(1, "BPI_BUS27"),
+ MTK_FUNCTION(5, "I2S2_BCK"),
+ MTK_FUNCTION(6, "IRTX_OUT"),
+ MTK_FUNCTION(7, "LTE_UTXD")
+ ),
+ MTK_PIN(
+ 131, "GPIO131",
+ MTK_EINT_FUNCTION(0, 131),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO131"),
+ MTK_FUNCTION(1, "LTE_PAVM0")
+ ),
+ MTK_PIN(
+ 132, "GPIO132",
+ MTK_EINT_FUNCTION(0, 132),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO132"),
+ MTK_FUNCTION(1, "LTE_PAVM1")
+ ),
+ MTK_PIN(
+ 133, "GPIO133",
+ MTK_EINT_FUNCTION(0, 133),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO133"),
+ MTK_FUNCTION(1, "MIPI1_SCLK")
+ ),
+ MTK_PIN(
+ 134, "GPIO134",
+ MTK_EINT_FUNCTION(0, 134),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO134"),
+ MTK_FUNCTION(1, "MIPI1_SDATA")
+ ),
+ MTK_PIN(
+ 135, "GPIO135",
+ MTK_EINT_FUNCTION(0, 135),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO135"),
+ MTK_FUNCTION(1, "MIPI0_SCLK")
+ ),
+ MTK_PIN(
+ 136, "GPIO136",
+ MTK_EINT_FUNCTION(0, 136),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO136"),
+ MTK_FUNCTION(1, "MIPI0_SDATA")
+ ),
+ MTK_PIN(
+ 137, "GPIO137",
+ MTK_EINT_FUNCTION(0, 137),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO137"),
+ MTK_FUNCTION(1, "RTC32K_CK")
+ ),
+ MTK_PIN(
+ 138, "GPIO138",
+ MTK_EINT_FUNCTION(0, 138),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO138"),
+ MTK_FUNCTION(1, "PWRAP_SPIDO"),
+ MTK_FUNCTION(2, "PWRAP_SPIDI")
+ ),
+ MTK_PIN(
+ 139, "GPIO139",
+ MTK_EINT_FUNCTION(0, 139),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO139"),
+ MTK_FUNCTION(1, "PWRAP_SPIDI"),
+ MTK_FUNCTION(2, "PWRAP_SPIDO")
+ ),
+ MTK_PIN(
+ 140, "GPIO140",
+ MTK_EINT_FUNCTION(0, 140),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO140"),
+ MTK_FUNCTION(3, "LTE_MD32_JTAG_TRST"),
+ MTK_FUNCTION(4, "TDD_TRSTN"),
+ MTK_FUNCTION(5, "DM_JTINTP")
+ ),
+ MTK_PIN(
+ 141, "GPIO141",
+ MTK_EINT_FUNCTION(0, 141),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO141"),
+ MTK_FUNCTION(1, "PWRAP_SPICK_I")
+ ),
+ MTK_PIN(
+ 142, "GPIO142",
+ MTK_EINT_FUNCTION(0, 142),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO142"),
+ MTK_FUNCTION(1, "PWRAP_SPICS_B_I")
+ ),
+ MTK_PIN(
+ 143, "GPIO143",
+ MTK_EINT_FUNCTION(0, 143),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO143"),
+ MTK_FUNCTION(1, "AUD_CLK_MOSI")
+ ),
+ MTK_PIN(
+ 144, "GPIO144",
+ MTK_EINT_FUNCTION(0, 144),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO144"),
+ MTK_FUNCTION(1, "AUD_DAT_MISO"),
+ MTK_FUNCTION(3, "AUD_DAT_MOSI")
+ ),
+ MTK_PIN(
+ 145, "GPIO145",
+ MTK_EINT_FUNCTION(0, 145),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO145"),
+ MTK_FUNCTION(1, "AUD_DAT_MOSI"),
+ MTK_FUNCTION(3, "AUD_DAT_MISO")
+ ),
+ MTK_PIN(
+ 146, "GPIO146",
+ MTK_EINT_FUNCTION(0, 146),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO146"),
+ MTK_FUNCTION(1, "LCM_RST")
+ ),
+ MTK_PIN(
+ 147, "GPIO147",
+ MTK_EINT_FUNCTION(0, 147),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO147"),
+ MTK_FUNCTION(1, "DSI_TE")
+ ),
+ MTK_PIN(
+ 148, "GPIO148",
+ MTK_EINT_FUNCTION(0, 148),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO148"),
+ MTK_FUNCTION(1, "SRCLKENA")
+ ),
+ MTK_PIN(
+ 149, "GPIO149",
+ MTK_EINT_FUNCTION(0, 149),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO149"),
+ MTK_FUNCTION(1, "WATCHDOG")
+ ),
+ MTK_PIN(
+ 150, "GPIO150",
+ MTK_EINT_FUNCTION(0, 150),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO150"),
+ MTK_FUNCTION(1, "TDP0")
+ ),
+ MTK_PIN(
+ 151, "GPIO151",
+ MTK_EINT_FUNCTION(0, 151),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO151"),
+ MTK_FUNCTION(1, "TDN0")
+ ),
+ MTK_PIN(
+ 152, "GPIO152",
+ MTK_EINT_FUNCTION(0, 152),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO152"),
+ MTK_FUNCTION(1, "TDP1")
+ ),
+ MTK_PIN(
+ 153, "GPIO153",
+ MTK_EINT_FUNCTION(0, 153),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO153"),
+ MTK_FUNCTION(1, "TDN1")
+ ),
+ MTK_PIN(
+ 154, "GPIO154",
+ MTK_EINT_FUNCTION(0, 154),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO154"),
+ MTK_FUNCTION(1, "TCP")
+ ),
+ MTK_PIN(
+ 155, "GPIO155",
+ MTK_EINT_FUNCTION(0, 155),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO155"),
+ MTK_FUNCTION(1, "TCN")
+ ),
+ MTK_PIN(
+ 156, "GPIO156",
+ MTK_EINT_FUNCTION(0, 156),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO156"),
+ MTK_FUNCTION(1, "TDP2")
+ ),
+ MTK_PIN(
+ 157, "GPIO157",
+ MTK_EINT_FUNCTION(0, 157),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO157"),
+ MTK_FUNCTION(1, "TDN2")
+ ),
+ MTK_PIN(
+ 158, "GPIO158",
+ MTK_EINT_FUNCTION(0, 158),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO158"),
+ MTK_FUNCTION(1, "TDP3")
+ ),
+ MTK_PIN(
+ 159, "GPIO159",
+ MTK_EINT_FUNCTION(0, 159),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO159"),
+ MTK_FUNCTION(1, "TDN3")
+ ),
+ MTK_PIN(
+ 160, "GPIO160",
+ MTK_EINT_FUNCTION(0, 160),
+ DRV_GRP0,
+ MTK_FUNCTION(0, "GPIO160"),
+ MTK_FUNCTION(1, "MD_SIM2_SCLK"),
+ MTK_FUNCTION(2, "MD_SIM1_SCLK"),
+ MTK_FUNCTION(3, "UIM0_CLK"),
+ MTK_FUNCTION(4, "UIM1_CLK")
+ ),
+ MTK_PIN(
+ 161, "GPIO161",
+ MTK_EINT_FUNCTION(0, 161),
+ DRV_GRP0,
+ MTK_FUNCTION(0, "GPIO161"),
+ MTK_FUNCTION(1, "MD_SIM2_SRST"),
+ MTK_FUNCTION(2, "MD_SIM1_SRST"),
+ MTK_FUNCTION(3, "UIM0_RST"),
+ MTK_FUNCTION(4, "UIM1_RST")
+ ),
+ MTK_PIN(
+ 162, "GPIO162",
+ MTK_EINT_FUNCTION(0, 162),
+ DRV_GRP0,
+ MTK_FUNCTION(0, "GPIO162"),
+ MTK_FUNCTION(1, "MD_SIM2_SDAT"),
+ MTK_FUNCTION(2, "MD_SIM1_SDAT"),
+ MTK_FUNCTION(3, "UIM0_IO"),
+ MTK_FUNCTION(4, "UIM1_IO")
+ ),
+ MTK_PIN(
+ 163, "GPIO163",
+ MTK_EINT_FUNCTION(0, 163),
+ DRV_GRP0,
+ MTK_FUNCTION(0, "GPIO163"),
+ MTK_FUNCTION(1, "MD_SIM1_SCLK"),
+ MTK_FUNCTION(2, "MD_SIM2_SCLK"),
+ MTK_FUNCTION(3, "UIM1_CLK"),
+ MTK_FUNCTION(4, "UIM0_CLK")
+ ),
+ MTK_PIN(
+ 164, "GPIO164",
+ MTK_EINT_FUNCTION(0, 164),
+ DRV_GRP0,
+ MTK_FUNCTION(0, "GPIO164"),
+ MTK_FUNCTION(1, "MD_SIM1_SRST"),
+ MTK_FUNCTION(2, "MD_SIM2_SRST"),
+ MTK_FUNCTION(3, "UIM1_RST"),
+ MTK_FUNCTION(4, "UIM0_RST")
+ ),
+ MTK_PIN(
+ 165, "GPIO165",
+ MTK_EINT_FUNCTION(0, 165),
+ DRV_GRP0,
+ MTK_FUNCTION(0, "GPIO165"),
+ MTK_FUNCTION(1, "MD_SIM1_SDAT"),
+ MTK_FUNCTION(2, "MD_SIM2_SDAT"),
+ MTK_FUNCTION(3, "UIM1_IO"),
+ MTK_FUNCTION(4, "UIM0_IO")
+ ),
+ MTK_PIN(
+ 166, "GPIO166",
+ MTK_EINT_FUNCTION(0, 166),
+ DRV_GRP4,
+ MTK_FUNCTION(0, "GPIO166"),
+ MTK_FUNCTION(1, "MSDC1_CMD"),
+ MTK_FUNCTION(2, "LTE_MD32_JTAG_TMS"),
+ MTK_FUNCTION(3, "C2K_TMS"),
+ MTK_FUNCTION(4, "TDD_TMS"),
+ MTK_FUNCTION(5, "CONN_DSP_JMS"),
+ MTK_FUNCTION(6, "JTMS"),
+ MTK_FUNCTION(7, "CONN_MCU_AICE_TMSC")
+ ),
+ MTK_PIN(
+ 167, "GPIO167",
+ MTK_EINT_FUNCTION(0, 167),
+ DRV_GRP4,
+ MTK_FUNCTION(0, "GPIO167"),
+ MTK_FUNCTION(1, "MSDC1_CLK"),
+ MTK_FUNCTION(2, "LTE_MD32_JTAG_TCK"),
+ MTK_FUNCTION(3, "C2K_TCK"),
+ MTK_FUNCTION(4, "TDD_TCK"),
+ MTK_FUNCTION(5, "CONN_DSP_JCK"),
+ MTK_FUNCTION(6, "JTCK"),
+ MTK_FUNCTION(7, "CONN_MCU_AICE_TCKC")
+ ),
+ MTK_PIN(
+ 168, "GPIO168",
+ MTK_EINT_FUNCTION(0, 168),
+ DRV_GRP4,
+ MTK_FUNCTION(0, "GPIO168"),
+ MTK_FUNCTION(1, "MSDC1_DAT0"),
+ MTK_FUNCTION(2, "LTE_MD32_JTAG_TDI"),
+ MTK_FUNCTION(3, "C2K_TDI"),
+ MTK_FUNCTION(4, "TDD_TDI"),
+ MTK_FUNCTION(5, "CONN_DSP_JDI"),
+ MTK_FUNCTION(6, "JTDI")
+ ),
+ MTK_PIN(
+ 169, "GPIO169",
+ MTK_EINT_FUNCTION(0, 169),
+ DRV_GRP4,
+ MTK_FUNCTION(0, "GPIO169"),
+ MTK_FUNCTION(1, "MSDC1_DAT1"),
+ MTK_FUNCTION(2, "LTE_MD32_JTAG_TDO"),
+ MTK_FUNCTION(3, "C2K_TDO"),
+ MTK_FUNCTION(4, "TDD_TDO"),
+ MTK_FUNCTION(5, "CONN_DSP_JDO"),
+ MTK_FUNCTION(6, "JTDO")
+ ),
+ MTK_PIN(
+ 170, "GPIO170",
+ MTK_EINT_FUNCTION(0, 170),
+ DRV_GRP4,
+ MTK_FUNCTION(0, "GPIO170"),
+ MTK_FUNCTION(1, "MSDC1_DAT2"),
+ MTK_FUNCTION(2, "LTE_MD32_JTAG_TRST"),
+ MTK_FUNCTION(3, "C2K_NTRST"),
+ MTK_FUNCTION(4, "TDD_TRSTN"),
+ MTK_FUNCTION(5, "CONN_DSP_JINTP"),
+ MTK_FUNCTION(6, "DM_JTINTP")
+ ),
+ MTK_PIN(
+ 171, "GPIO171",
+ MTK_EINT_FUNCTION(0, 171),
+ DRV_GRP4,
+ MTK_FUNCTION(0, "GPIO171"),
+ MTK_FUNCTION(1, "MSDC1_DAT3"),
+ MTK_FUNCTION(3, "C2K_RTCK")
+ ),
+ MTK_PIN(
+ 172, "GPIO172",
+ MTK_EINT_FUNCTION(0, 172),
+ DRV_GRP4,
+ MTK_FUNCTION(0, "GPIO172"),
+ MTK_FUNCTION(1, "MSDC0_CMD")
+ ),
+ MTK_PIN(
+ 173, "GPIO173",
+ MTK_EINT_FUNCTION(0, 173),
+ DRV_GRP4,
+ MTK_FUNCTION(0, "GPIO173"),
+ MTK_FUNCTION(1, "MSDC0_DSL")
+ ),
+ MTK_PIN(
+ 174, "GPIO174",
+ MTK_EINT_FUNCTION(0, 174),
+ DRV_GRP4,
+ MTK_FUNCTION(0, "GPIO174"),
+ MTK_FUNCTION(1, "MSDC0_CLK")
+ ),
+ MTK_PIN(
+ 175, "GPIO175",
+ MTK_EINT_FUNCTION(0, 175),
+ DRV_GRP4,
+ MTK_FUNCTION(0, "GPIO175"),
+ MTK_FUNCTION(1, "MSDC0_DAT0")
+ ),
+ MTK_PIN(
+ 176, "GPIO176",
+ MTK_EINT_FUNCTION(0, 176),
+ DRV_GRP4,
+ MTK_FUNCTION(0, "GPIO176"),
+ MTK_FUNCTION(1, "MSDC0_DAT1")
+ ),
+ MTK_PIN(
+ 177, "GPIO177",
+ MTK_EINT_FUNCTION(0, 177),
+ DRV_GRP4,
+ MTK_FUNCTION(0, "GPIO177"),
+ MTK_FUNCTION(1, "MSDC0_DAT2")
+ ),
+ MTK_PIN(
+ 178, "GPIO178",
+ MTK_EINT_FUNCTION(0, 178),
+ DRV_GRP4,
+ MTK_FUNCTION(0, "GPIO178"),
+ MTK_FUNCTION(1, "MSDC0_DAT3")
+ ),
+ MTK_PIN(
+ 179, "GPIO179",
+ MTK_EINT_FUNCTION(0, 179),
+ DRV_GRP4,
+ MTK_FUNCTION(0, "GPIO179"),
+ MTK_FUNCTION(1, "MSDC0_DAT4")
+ ),
+ MTK_PIN(
+ 180, "GPIO180",
+ MTK_EINT_FUNCTION(0, 180),
+ DRV_GRP4,
+ MTK_FUNCTION(0, "GPIO180"),
+ MTK_FUNCTION(1, "MSDC0_DAT5")
+ ),
+ MTK_PIN(
+ 181, "GPIO181",
+ MTK_EINT_FUNCTION(0, 181),
+ DRV_GRP4,
+ MTK_FUNCTION(0, "GPIO181"),
+ MTK_FUNCTION(1, "MSDC0_DAT6")
+ ),
+ MTK_PIN(
+ 182, "GPIO182",
+ MTK_EINT_FUNCTION(0, 182),
+ DRV_GRP4,
+ MTK_FUNCTION(0, "GPIO182"),
+ MTK_FUNCTION(1, "MSDC0_DAT7")
+ ),
+ MTK_PIN(
+ 183, "GPIO183",
+ MTK_EINT_FUNCTION(0, 183),
+ DRV_GRP4,
+ MTK_FUNCTION(0, "GPIO183"),
+ MTK_FUNCTION(1, "MSDC0_RSTB")
+ ),
+ MTK_PIN(
+ 184, "GPIO184",
+ MTK_EINT_FUNCTION(0, 184),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO184"),
+ MTK_FUNCTION(1, "F2W_DATA"),
+ MTK_FUNCTION(2, "MRG_CLK"),
+ MTK_FUNCTION(3, "C2K_DM_EINT2"),
+ MTK_FUNCTION(4, "PCM0_CLK")
+ ),
+ MTK_PIN(
+ 185, "GPIO185",
+ MTK_EINT_FUNCTION(0, 185),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO185"),
+ MTK_FUNCTION(1, "F2W_CK"),
+ MTK_FUNCTION(2, "MRG_DI"),
+ MTK_FUNCTION(3, "C2K_DM_EINT3"),
+ MTK_FUNCTION(4, "PCM0_DI")
+ ),
+ MTK_PIN(
+ 186, "GPIO186",
+ MTK_EINT_FUNCTION(0, 186),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO186"),
+ MTK_FUNCTION(1, "WB_RSTB"),
+ MTK_FUNCTION(4, "URXD3"),
+ MTK_FUNCTION(5, "UTXD3")
+ ),
+ MTK_PIN(
+ 187, "GPIO187",
+ MTK_EINT_FUNCTION(0, 187),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO187"),
+ MTK_FUNCTION(1, "WB_SCLK"),
+ MTK_FUNCTION(2, "MRG_DO"),
+ MTK_FUNCTION(4, "PCM0_DO")
+ ),
+ MTK_PIN(
+ 188, "GPIO188",
+ MTK_EINT_FUNCTION(0, 188),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO188"),
+ MTK_FUNCTION(1, "WB_SDATA"),
+ MTK_FUNCTION(2, "MRG_SYNC"),
+ MTK_FUNCTION(4, "PCM0_SYNC")
+ ),
+ MTK_PIN(
+ 189, "GPIO189",
+ MTK_EINT_FUNCTION(0, 189),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO189"),
+ MTK_FUNCTION(1, "WB_SEN"),
+ MTK_FUNCTION(4, "UTXD3"),
+ MTK_FUNCTION(5, "URXD3")
+ ),
+ MTK_PIN(
+ 190, "GPIO190",
+ MTK_EINT_FUNCTION(0, 190),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO190"),
+ MTK_FUNCTION(1, "GPS_RXQN")
+ ),
+ MTK_PIN(
+ 191, "GPIO191",
+ MTK_EINT_FUNCTION(0, 191),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO191"),
+ MTK_FUNCTION(1, "GPS_RXQP")
+ ),
+ MTK_PIN(
+ 192, "GPIO192",
+ MTK_EINT_FUNCTION(0, 192),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO192"),
+ MTK_FUNCTION(1, "GPS_RXIN")
+ ),
+ MTK_PIN(
+ 193, "GPIO193",
+ MTK_EINT_FUNCTION(0, 193),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO193"),
+ MTK_FUNCTION(1, "GPS_RXIP")
+ ),
+ MTK_PIN(
+ 194, "GPIO194",
+ MTK_EINT_FUNCTION(0, 194),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO194"),
+ MTK_FUNCTION(1, "WB_RXQN")
+ ),
+ MTK_PIN(
+ 195, "GPIO195",
+ MTK_EINT_FUNCTION(0, 195),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO195"),
+ MTK_FUNCTION(1, "WB_RXQP")
+ ),
+ MTK_PIN(
+ 196, "GPIO196",
+ MTK_EINT_FUNCTION(0, 196),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO196"),
+ MTK_FUNCTION(1, "WB_RXIN")
+ ),
+ MTK_PIN(
+ 197, "GPIO197",
+ MTK_EINT_FUNCTION(0, 197),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO197"),
+ MTK_FUNCTION(1, "WB_RXIP")
+ ),
+ MTK_PIN(
+ 198, "GPIO198",
+ MTK_EINT_FUNCTION(0, 198),
+ DRV_GRP4,
+ MTK_FUNCTION(0, "GPIO198"),
+ MTK_FUNCTION(1, "MSDC2_CMD"),
+ MTK_FUNCTION(2, "SDA1"),
+ MTK_FUNCTION(3, "C2K_UART0_RXD"),
+ MTK_FUNCTION(4, "C2K_TMS"),
+ MTK_FUNCTION(5, "ANT_SEL6"),
+ MTK_FUNCTION(7, "DM_OTMS")
+ ),
+ MTK_PIN(
+ 199, "GPIO199",
+ MTK_EINT_FUNCTION(0, 199),
+ DRV_GRP4,
+ MTK_FUNCTION(0, "GPIO199"),
+ MTK_FUNCTION(1, "MSDC2_CLK"),
+ MTK_FUNCTION(2, "SCL1"),
+ MTK_FUNCTION(3, "C2K_UART0_TXD"),
+ MTK_FUNCTION(4, "C2K_TCK"),
+ MTK_FUNCTION(5, "ANT_SEL7"),
+ MTK_FUNCTION(6, "TDD_TXD"),
+ MTK_FUNCTION(7, "DM_OTCK")
+ ),
+ MTK_PIN(
+ 200, "GPIO200",
+ MTK_EINT_FUNCTION(0, 200),
+ DRV_GRP4,
+ MTK_FUNCTION(0, "GPIO200"),
+ MTK_FUNCTION(1, "MSDC2_DAT0"),
+ MTK_FUNCTION(2, "ANT_SEL6"),
+ MTK_FUNCTION(3, "GPS_FRAME_SYNC"),
+ MTK_FUNCTION(4, "C2K_TDI"),
+ MTK_FUNCTION(5, "UTXD0"),
+ MTK_FUNCTION(7, "DM_OTDI")
+ ),
+ MTK_PIN(
+ 201, "GPIO201",
+ MTK_EINT_FUNCTION(0, 201),
+ DRV_GRP4,
+ MTK_FUNCTION(0, "GPIO201"),
+ MTK_FUNCTION(1, "MSDC2_DAT1"),
+ MTK_FUNCTION(2, "ANT_SEL3"),
+ MTK_FUNCTION(3, "PWM0"),
+ MTK_FUNCTION(4, "C2K_TDO"),
+ MTK_FUNCTION(5, "URXD0"),
+ MTK_FUNCTION(7, "DM_OTDO")
+ ),
+ MTK_PIN(
+ 202, "GPIO202",
+ MTK_EINT_FUNCTION(0, 202),
+ DRV_GRP4,
+ MTK_FUNCTION(0, "GPIO202"),
+ MTK_FUNCTION(1, "MSDC2_DAT2"),
+ MTK_FUNCTION(2, "ANT_SEL4"),
+ MTK_FUNCTION(3, "SDA2"),
+ MTK_FUNCTION(4, "C2K_NTRST"),
+ MTK_FUNCTION(5, "UTXD1"),
+ MTK_FUNCTION(6, "KCOL3"),
+ MTK_FUNCTION(7, "DM_JTINTP")
+ ),
+ MTK_PIN(
+ 203, "GPIO203",
+ MTK_EINT_FUNCTION(0, 203),
+ DRV_GRP4,
+ MTK_FUNCTION(0, "GPIO203"),
+ MTK_FUNCTION(1, "MSDC2_DAT3"),
+ MTK_FUNCTION(2, "ANT_SEL5"),
+ MTK_FUNCTION(3, "SCL2"),
+ MTK_FUNCTION(4, "C2K_RTCK"),
+ MTK_FUNCTION(5, "URXD1"),
+ MTK_FUNCTION(6, "KCOL6")
+ ),
+ MTK_PIN(
+ 204, "GPIO204",
+ MTK_EINT_FUNCTION(0, 204),
+ DRV_FIXED,
+ MTK_FUNCTION(0, NULL)
+ ),
+ MTK_PIN(
+ 205, "GPIO205",
+ MTK_EINT_FUNCTION(0, 205),
+ DRV_FIXED,
+ MTK_FUNCTION(0, NULL)
+ ),
+ MTK_PIN(
+ 206, "GPIO206",
+ MTK_EINT_FUNCTION(0, 206),
+ DRV_FIXED,
+ MTK_FUNCTION(0, NULL)
+ ),
+ MTK_PIN(
+ 207, "GPIO207",
+ MTK_EINT_FUNCTION(0, 207),
+ DRV_FIXED,
+ MTK_FUNCTION(0, NULL)
+ ),
+ MTK_PIN(
+ 208, "GPIO208",
+ MTK_EINT_FUNCTION(0, 208),
+ DRV_FIXED,
+ MTK_FUNCTION(0, NULL)
+ ),
+ MTK_PIN(
+ 209, "GPIO209",
+ MTK_EINT_FUNCTION(0, 209),
+ DRV_FIXED,
+ MTK_FUNCTION(0, NULL)
+ ),
+ MTK_PIN(
+ 210, "GPIO210",
+ MTK_EINT_FUNCTION(0, 210),
+ DRV_FIXED,
+ MTK_FUNCTION(0, NULL)
+ ),
+ MTK_PIN(
+ 211, "GPIO211",
+ MTK_EINT_FUNCTION(0, 211),
+ DRV_FIXED,
+ MTK_FUNCTION(0, NULL)
+ ),
+ MTK_PIN(
+ 212, "GPIO212",
+ MTK_EINT_FUNCTION(0, 212),
+ DRV_FIXED,
+ MTK_FUNCTION(0, NULL)
+ ),
+};
+
+static const struct mtk_pin_desc mtk_pins_mt6735m[] = {
+ MTK_PIN(
+ 0, "GPIO0",
+ MTK_EINT_FUNCTION(0, 0),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO0"),
+ MTK_FUNCTION(1, "IDDIG"),
+ MTK_FUNCTION(2, "DPI_D4"),
+ MTK_FUNCTION(3, "CLKM4"),
+ MTK_FUNCTION(4, "EXT_FRAME_SYNC"),
+ MTK_FUNCTION(5, "PWM3"),
+ MTK_FUNCTION(6, "KCOL2"),
+ MTK_FUNCTION(7, "C2K_ARM_EINT0")
+ ),
+ MTK_PIN(
+ 1, "GPIO1",
+ MTK_EINT_FUNCTION(0, 1),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO1"),
+ MTK_FUNCTION(1, "PWM2"),
+ MTK_FUNCTION(2, "DPI_D5"),
+ MTK_FUNCTION(3, "MD_EINT0"),
+ MTK_FUNCTION(4, "TDD_TDO"),
+ MTK_FUNCTION(5, "CONN_MCU_TDO"),
+ MTK_FUNCTION(6, "PTA_RXD"),
+ MTK_FUNCTION(7, "C2K_ARM_EINT1")
+ ),
+ MTK_PIN(
+ 2, "GPIO2",
+ MTK_EINT_FUNCTION(0, 2),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO2"),
+ MTK_FUNCTION(1, "CLKM0"),
+ MTK_FUNCTION(2, "DPI_D6"),
+ MTK_FUNCTION(3, "MD_EINT0"),
+ MTK_FUNCTION(4, "USB_DRVVBUS"),
+ MTK_FUNCTION(5, "CONN_MCU_DBGACK_N"),
+ MTK_FUNCTION(6, "PTA_TXD"),
+ MTK_FUNCTION(7, "C2K_ARM_EINT2")
+ ),
+ MTK_PIN(
+ 3, "GPIO3",
+ MTK_EINT_FUNCTION(0, 3),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO3"),
+ MTK_FUNCTION(1, "CLKM1"),
+ MTK_FUNCTION(2, "DPI_D7"),
+ MTK_FUNCTION(3, "SPI_MIB"),
+ MTK_FUNCTION(4, "MD_EINT0"),
+ MTK_FUNCTION(5, "CONN_MCU_DBGI_N"),
+ MTK_FUNCTION(6, "CONN_MCU_AICE_TMSC"),
+ MTK_FUNCTION(7, "C2K_ARM_EINT3")
+ ),
+ MTK_PIN(
+ 4, "GPIO4",
+ MTK_EINT_FUNCTION(0, 4),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO4"),
+ MTK_FUNCTION(1, "CLKM2"),
+ MTK_FUNCTION(2, "DPI_D8"),
+ MTK_FUNCTION(3, "SPI_MOB"),
+ MTK_FUNCTION(4, "TDD_TCK"),
+ MTK_FUNCTION(5, "CONN_MCU_TCK[0]"),
+ MTK_FUNCTION(6, "CONN_MCU_AICE_TCKC"),
+ MTK_FUNCTION(7, "C2K_DM_EINT0")
+ ),
+ MTK_PIN(
+ 5, "GPIO5",
+ MTK_EINT_FUNCTION(0, 5),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO5"),
+ MTK_FUNCTION(1, "UCTS2"),
+ MTK_FUNCTION(2, "DPI_D9"),
+ MTK_FUNCTION(3, "SPI_CSB"),
+ MTK_FUNCTION(4, "TDD_TDI"),
+ MTK_FUNCTION(5, "CONN_MCU_TDI"),
+ MTK_FUNCTION(6, "I2S1_DO"),
+ MTK_FUNCTION(7, "MD_URXD")
+ ),
+ MTK_PIN(
+ 6, "GPIO6",
+ MTK_EINT_FUNCTION(0, 6),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO6"),
+ MTK_FUNCTION(1, "URTS2"),
+ MTK_FUNCTION(2, "DPI_D10"),
+ MTK_FUNCTION(3, "SPI_CKB"),
+ MTK_FUNCTION(4, "TDD_TRSTN"),
+ MTK_FUNCTION(5, "CONN_MCU_TRST_B"),
+ MTK_FUNCTION(6, "I2S1_LRCK"),
+ MTK_FUNCTION(7, "MD_UTXD")
+ ),
+ MTK_PIN(
+ 7, "GPIO7",
+ MTK_EINT_FUNCTION(0, 7),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO7"),
+ MTK_FUNCTION(1, "UCTS3"),
+ MTK_FUNCTION(2, "DPI_D11"),
+ MTK_FUNCTION(3, "SDA1"),
+ MTK_FUNCTION(4, "TDD_TMS"),
+ MTK_FUNCTION(5, "CONN_MCU_TMS"),
+ MTK_FUNCTION(6, "I2S1_BCK"),
+ MTK_FUNCTION(7, "TDD_TXD")
+ ),
+ MTK_PIN(
+ 8, "GPIO8",
+ MTK_EINT_FUNCTION(0, 8),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO8"),
+ MTK_FUNCTION(1, "URTS3"),
+ MTK_FUNCTION(2, "C2K_UIM0_HOT_PLUG_IN"),
+ MTK_FUNCTION(3, "SCL1"),
+ MTK_FUNCTION(4, "PCM1_DO1"),
+ MTK_FUNCTION(5, "MD_EINT1"),
+ MTK_FUNCTION(6, "KCOL4"),
+ MTK_FUNCTION(7, "UTXD0")
+ ),
+ MTK_PIN(
+ 9, "GPIO9",
+ MTK_EINT_FUNCTION(0, 9),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO9"),
+ MTK_FUNCTION(1, "C2K_UIM1_HOT_PLUG_IN"),
+ MTK_FUNCTION(2, "PCM1_DO0"),
+ MTK_FUNCTION(3, "I2S3_MCK"),
+ MTK_FUNCTION(4, "MD_EINT2"),
+ MTK_FUNCTION(5, "CLKM2"),
+ MTK_FUNCTION(6, "I2S1_MCK"),
+ MTK_FUNCTION(7, "DBG_MON_A29")
+ ),
+ MTK_PIN(
+ 10, "GPIO10",
+ MTK_EINT_FUNCTION(0, 10),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO10"),
+ MTK_FUNCTION(1, "PWM1"),
+ MTK_FUNCTION(2, "CLKM1"),
+ MTK_FUNCTION(3, "KROW2"),
+ MTK_FUNCTION(4, "MD_EINT0"),
+ MTK_FUNCTION(5, "I2S1_MCK"),
+ MTK_FUNCTION(6, "SDA3"),
+ MTK_FUNCTION(7, "DBG_MON_A30")
+ ),
+ MTK_PIN(
+ 11, "GPIO11",
+ MTK_EINT_FUNCTION(0, 11),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO11"),
+ MTK_FUNCTION(1, "MD_EINT1"),
+ MTK_FUNCTION(2, "IRTX_OUT"),
+ MTK_FUNCTION(3, "C2K_UIM0_HOT_PLUG_IN"),
+ MTK_FUNCTION(4, "CLKM0"),
+ MTK_FUNCTION(5, "I2S2_MCK"),
+ MTK_FUNCTION(6, "SCL3"),
+ MTK_FUNCTION(7, "URXD0")
+ ),
+ MTK_PIN(
+ 12, "GPIO12",
+ MTK_EINT_FUNCTION(0, 12),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO12"),
+ MTK_FUNCTION(1, "I2S0_MCK"),
+ MTK_FUNCTION(2, "C2K_UIM1_HOT_PLUG_IN"),
+ MTK_FUNCTION(3, "KCOL2"),
+ MTK_FUNCTION(4, "MD_EINT2"),
+ MTK_FUNCTION(5, "IRTX_OUT"),
+ MTK_FUNCTION(6, "SRCLKENAI2"),
+ MTK_FUNCTION(7, "PCM1_DO1")
+ ),
+ MTK_PIN(
+ 13, "GPIO13",
+ MTK_EINT_FUNCTION(0, 13),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO13"),
+ MTK_FUNCTION(1, "WB_CTRL0"),
+ MTK_FUNCTION(3, "C2K_ARM_EINT0"),
+ MTK_FUNCTION(7, "DBG_MON_A0")
+ ),
+ MTK_PIN(
+ 14, "GPIO14",
+ MTK_EINT_FUNCTION(0, 14),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO14"),
+ MTK_FUNCTION(1, "WB_CTRL1"),
+ MTK_FUNCTION(3, "C2K_ARM_EINT1"),
+ MTK_FUNCTION(7, "DBG_MON_A1")
+ ),
+ MTK_PIN(
+ 15, "GPIO15",
+ MTK_EINT_FUNCTION(0, 15),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO15"),
+ MTK_FUNCTION(1, "WB_CTRL2"),
+ MTK_FUNCTION(3, "C2K_ARM_EINT2"),
+ MTK_FUNCTION(7, "DBG_MON_A2")
+ ),
+ MTK_PIN(
+ 16, "GPIO16",
+ MTK_EINT_FUNCTION(0, 16),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO16"),
+ MTK_FUNCTION(1, "WB_CTRL3"),
+ MTK_FUNCTION(3, "C2K_ARM_EINT3"),
+ MTK_FUNCTION(7, "DBG_MON_A3")
+ ),
+ MTK_PIN(
+ 17, "GPIO17",
+ MTK_EINT_FUNCTION(0, 17),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO17"),
+ MTK_FUNCTION(1, "WB_CTRL4"),
+ MTK_FUNCTION(3, "C2K_DM_EINT0"),
+ MTK_FUNCTION(4, "WATCHDOG"),
+ MTK_FUNCTION(7, "DBG_MON_A4")
+ ),
+ MTK_PIN(
+ 18, "GPIO18",
+ MTK_EINT_FUNCTION(0, 18),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO18"),
+ MTK_FUNCTION(1, "WB_CTRL5"),
+ MTK_FUNCTION(3, "C2K_DM_EINT1"),
+ MTK_FUNCTION(7, "DBG_MON_A5")
+ ),
+ MTK_PIN(
+ 19, "GPIO19",
+ MTK_EINT_FUNCTION(0, 19),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO19"),
+ MTK_FUNCTION(1, "ANT_SEL0"),
+ MTK_FUNCTION(2, "IRTX_OUT"),
+ MTK_FUNCTION(3, "IRDA_TX"),
+ MTK_FUNCTION(4, "C2K_UART0_TXD"),
+ MTK_FUNCTION(5, "GPS_FRAME_SYNC"),
+ MTK_FUNCTION(6, "LTE_UTXD"),
+ MTK_FUNCTION(7, "DBG_MON_A6")
+ ),
+ MTK_PIN(
+ 20, "GPIO20",
+ MTK_EINT_FUNCTION(0, 20),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO20"),
+ MTK_FUNCTION(1, "ANT_SEL1"),
+ MTK_FUNCTION(2, "C2K_UIM1_HOT_PLUG_IN"),
+ MTK_FUNCTION(3, "IRDA_RX"),
+ MTK_FUNCTION(4, "C2K_UART0_RXD"),
+ MTK_FUNCTION(5, "MD_EINT2"),
+ MTK_FUNCTION(6, "LTE_URXD"),
+ MTK_FUNCTION(7, "DBG_MON_A7")
+ ),
+ MTK_PIN(
+ 21, "GPIO21",
+ MTK_EINT_FUNCTION(0, 21),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO21"),
+ MTK_FUNCTION(1, "ANT_SEL2"),
+ MTK_FUNCTION(2, "PWM2"),
+ MTK_FUNCTION(3, "IRDA_PDN"),
+ MTK_FUNCTION(4, "CORESONIC_SWCK"),
+ MTK_FUNCTION(5, "MD_EINT1"),
+ MTK_FUNCTION(6, "C2K_UIM0_HOT_PLUG_IN"),
+ MTK_FUNCTION(7, "DBG_MON_A8")
+ ),
+ MTK_PIN(
+ 22, "GPIO22",
+ MTK_EINT_FUNCTION(0, 22),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO22"),
+ MTK_FUNCTION(1, "RDN0")
+ ),
+ MTK_PIN(
+ 23, "GPIO23",
+ MTK_EINT_FUNCTION(0, 23),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO23"),
+ MTK_FUNCTION(1, "RDP0")
+ ),
+ MTK_PIN(
+ 24, "GPIO24",
+ MTK_EINT_FUNCTION(0, 24),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO24"),
+ MTK_FUNCTION(1, "RDN1")
+ ),
+ MTK_PIN(
+ 25, "GPIO25",
+ MTK_EINT_FUNCTION(0, 25),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO25"),
+ MTK_FUNCTION(1, "RDP1")
+ ),
+ MTK_PIN(
+ 26, "GPIO26",
+ MTK_EINT_FUNCTION(0, 26),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO26"),
+ MTK_FUNCTION(1, "RCN")
+ ),
+ MTK_PIN(
+ 27, "GPIO27",
+ MTK_EINT_FUNCTION(0, 27),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO27"),
+ MTK_FUNCTION(1, "RCP")
+ ),
+ MTK_PIN(
+ 28, "GPIO28",
+ MTK_EINT_FUNCTION(0, 28),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO28"),
+ MTK_FUNCTION(1, "RDN2")
+ ),
+ MTK_PIN(
+ 29, "GPIO29",
+ MTK_EINT_FUNCTION(0, 29),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO29"),
+ MTK_FUNCTION(1, "RDP2")
+ ),
+ MTK_PIN(
+ 30, "GPIO30",
+ MTK_EINT_FUNCTION(0, 30),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO30"),
+ MTK_FUNCTION(1, "RDN3")
+ ),
+ MTK_PIN(
+ 31, "GPIO31",
+ MTK_EINT_FUNCTION(0, 31),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO31"),
+ MTK_FUNCTION(1, "RDP3")
+ ),
+ MTK_PIN(
+ 32, "GPIO32",
+ MTK_EINT_FUNCTION(0, 32),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO32"),
+ MTK_FUNCTION(1, "RDN0_A"),
+ MTK_FUNCTION(2, "CMHSYNC"),
+ MTK_FUNCTION(3, "CMCSD0")
+ ),
+ MTK_PIN(
+ 33, "GPIO33",
+ MTK_EINT_FUNCTION(0, 33),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO33"),
+ MTK_FUNCTION(1, "RDP0_A"),
+ MTK_FUNCTION(2, "CMVSYNC"),
+ MTK_FUNCTION(3, "CMCSD1")
+ ),
+ MTK_PIN(
+ 34, "GPIO34",
+ MTK_EINT_FUNCTION(0, 34),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO34"),
+ MTK_FUNCTION(1, "RDN1_A"),
+ MTK_FUNCTION(2, "CMDAT9"),
+ MTK_FUNCTION(3, "CMCSD2")
+ ),
+ MTK_PIN(
+ 35, "GPIO35",
+ MTK_EINT_FUNCTION(0, 35),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO35"),
+ MTK_FUNCTION(1, "RDP1_A"),
+ MTK_FUNCTION(2, "CMDAT8"),
+ MTK_FUNCTION(3, "CMCSD3")
+ ),
+ MTK_PIN(
+ 36, "GPIO36",
+ MTK_EINT_FUNCTION(0, 36),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO36"),
+ MTK_FUNCTION(1, "RCN_A"),
+ MTK_FUNCTION(2, "CMDAT7")
+ ),
+ MTK_PIN(
+ 37, "GPIO37",
+ MTK_EINT_FUNCTION(0, 37),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO37"),
+ MTK_FUNCTION(1, "RCP_A"),
+ MTK_FUNCTION(2, "CMDAT6")
+ ),
+ MTK_PIN(
+ 38, "GPIO38",
+ MTK_EINT_FUNCTION(0, 38),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO38"),
+ MTK_FUNCTION(1, "RDN2_A"),
+ MTK_FUNCTION(2, "CMDAT5")
+ ),
+ MTK_PIN(
+ 39, "GPIO39",
+ MTK_EINT_FUNCTION(0, 39),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO39"),
+ MTK_FUNCTION(1, "RDP2_A"),
+ MTK_FUNCTION(2, "CMDAT4")
+ ),
+ MTK_PIN(
+ 40, "GPIO40",
+ MTK_EINT_FUNCTION(0, 40),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO40"),
+ MTK_FUNCTION(1, "RDN3_A"),
+ MTK_FUNCTION(2, "CMDAT3")
+ ),
+ MTK_PIN(
+ 41, "GPIO41",
+ MTK_EINT_FUNCTION(0, 41),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO41"),
+ MTK_FUNCTION(1, "RDP3_A"),
+ MTK_FUNCTION(2, "CMDAT2")
+ ),
+ MTK_PIN(
+ 42, "GPIO42",
+ MTK_EINT_FUNCTION(0, 42),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO42"),
+ MTK_FUNCTION(1, "CMDAT0"),
+ MTK_FUNCTION(2, "CMCSD0"),
+ MTK_FUNCTION(3, "CMMCLK1"),
+ MTK_FUNCTION(5, "ANT_SEL5"),
+ MTK_FUNCTION(6, "CLKM5"),
+ MTK_FUNCTION(7, "DBG_MON_A9")
+ ),
+ MTK_PIN(
+ 43, "GPIO43",
+ MTK_EINT_FUNCTION(0, 43),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO43"),
+ MTK_FUNCTION(1, "CMDAT1"),
+ MTK_FUNCTION(2, "CMCSD1"),
+ MTK_FUNCTION(3, "CMFLASH"),
+ MTK_FUNCTION(4, "MD_EINT0"),
+ MTK_FUNCTION(5, "CMMCLK1"),
+ MTK_FUNCTION(6, "CLKM4"),
+ MTK_FUNCTION(7, "DBG_MON_A10")
+ ),
+ MTK_PIN(
+ 44, "GPIO44",
+ MTK_EINT_FUNCTION(0, 44),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO44"),
+ MTK_FUNCTION(1, "CMPCLK"),
+ MTK_FUNCTION(2, "CMCSK"),
+ MTK_FUNCTION(3, "CMCSD2"),
+ MTK_FUNCTION(4, "KCOL3"),
+ MTK_FUNCTION(5, "SRCLKENAI2"),
+ MTK_FUNCTION(6, "PWM0"),
+ MTK_FUNCTION(7, "DBG_MON_A11")
+ ),
+ MTK_PIN(
+ 45, "GPIO45",
+ MTK_EINT_FUNCTION(0, 45),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO45"),
+ MTK_FUNCTION(1, "CMMCLK0"),
+ MTK_FUNCTION(7, "DBG_MON_A12")
+ ),
+ MTK_PIN(
+ 46, "GPIO46",
+ MTK_EINT_FUNCTION(0, 46),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO46"),
+ MTK_FUNCTION(1, "CMMCLK1"),
+ MTK_FUNCTION(2, "IDDIG"),
+ MTK_FUNCTION(3, "LTE_MD32_JTAG_TRST"),
+ MTK_FUNCTION(4, "TDD_TRSTN"),
+ MTK_FUNCTION(5, "DM_JTINTP"),
+ MTK_FUNCTION(6, "KCOL6"),
+ MTK_FUNCTION(7, "DBG_MON_A13")
+ ),
+ MTK_PIN(
+ 47, "GPIO47",
+ MTK_EINT_FUNCTION(0, 47),
+ DRV_FIXED,
+ MTK_FUNCTION(0, "GPIO47"),
+ MTK_FUNCTION(1, "SDA0")
+ ),
+ MTK_PIN(
+ 48, "GPIO48",
+ MTK_EINT_FUNCTION(0, 48),
+ DRV_FIXED,
+ MTK_FUNCTION(0, "GPIO48"),
+ MTK_FUNCTION(1, "SCL0")
+ ),
+ MTK_PIN(
+ 49, "GPIO49",
+ MTK_EINT_FUNCTION(0, 49),
+ DRV_FIXED,
+ MTK_FUNCTION(0, "GPIO49"),
+ MTK_FUNCTION(1, "SDA1")
+ ),
+ MTK_PIN(
+ 50, "GPIO50",
+ MTK_EINT_FUNCTION(0, 50),
+ DRV_FIXED,
+ MTK_FUNCTION(0, "GPIO50"),
+ MTK_FUNCTION(1, "SCL1")
+ ),
+ MTK_PIN(
+ 51, "GPIO51",
+ MTK_EINT_FUNCTION(0, 51),
+ DRV_FIXED,
+ MTK_FUNCTION(0, "GPIO51"),
+ MTK_FUNCTION(1, "SDA2")
+ ),
+ MTK_PIN(
+ 52, "GPIO52",
+ MTK_EINT_FUNCTION(0, 52),
+ DRV_FIXED,
+ MTK_FUNCTION(0, "GPIO52"),
+ MTK_FUNCTION(1, "SCL2")
+ ),
+ MTK_PIN(
+ 53, "GPIO53",
+ MTK_EINT_FUNCTION(0, 53),
+ DRV_FIXED,
+ MTK_FUNCTION(0, "GPIO53"),
+ MTK_FUNCTION(1, "SDA3"),
+ MTK_FUNCTION(3, "IDDIG"),
+ MTK_FUNCTION(5, "MD_EINT2"),
+ MTK_FUNCTION(6, "C2K_UIM1_HOT_PLUG_IN")
+ ),
+ MTK_PIN(
+ 54, "GPIO54",
+ MTK_EINT_FUNCTION(0, 54),
+ DRV_FIXED,
+ MTK_FUNCTION(0, "GPIO54"),
+ MTK_FUNCTION(1, "SCL3"),
+ MTK_FUNCTION(3, "IDDIG"),
+ MTK_FUNCTION(5, "MD_EINT1"),
+ MTK_FUNCTION(6, "C2K_UIM0_HOT_PLUG_IN")
+ ),
+ MTK_PIN(
+ 55, "GPIO55",
+ MTK_EINT_FUNCTION(0, 55),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO55"),
+ MTK_FUNCTION(1, "SRCLKENAI0"),
+ MTK_FUNCTION(2, "PWM2"),
+ MTK_FUNCTION(3, "CLKM5"),
+ MTK_FUNCTION(4, "CORESONIC_SWD"),
+ MTK_FUNCTION(5, "ANT_SEL6"),
+ MTK_FUNCTION(6, "KROW5"),
+ MTK_FUNCTION(7, "DISP_PWM")
+ ),
+ MTK_PIN(
+ 56, "GPIO56",
+ MTK_EINT_FUNCTION(0, 56),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO56"),
+ MTK_FUNCTION(1, "SRCLKENA1")
+ ),
+ MTK_PIN(
+ 57, "GPIO57",
+ MTK_EINT_FUNCTION(0, 57),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO57"),
+ MTK_FUNCTION(1, "URXD2"),
+ MTK_FUNCTION(2, "DPI_HSYNC0"),
+ MTK_FUNCTION(3, "UTXD2"),
+ MTK_FUNCTION(4, "MD_URXD"),
+ MTK_FUNCTION(5, "SRCLKENAI1"),
+ MTK_FUNCTION(6, "KROW4"),
+ MTK_FUNCTION(7, "DBG_MON_A14")
+ ),
+ MTK_PIN(
+ 58, "GPIO58",
+ MTK_EINT_FUNCTION(0, 58),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO58"),
+ MTK_FUNCTION(1, "UTXD2"),
+ MTK_FUNCTION(2, "DPI_VSYNC0"),
+ MTK_FUNCTION(3, "URXD2"),
+ MTK_FUNCTION(4, "MD_UTXD"),
+ MTK_FUNCTION(5, "TDD_TXD"),
+ MTK_FUNCTION(6, "KROW5"),
+ MTK_FUNCTION(7, "DBG_MON_A15")
+ ),
+ MTK_PIN(
+ 59, "GPIO59",
+ MTK_EINT_FUNCTION(0, 59),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO59"),
+ MTK_FUNCTION(1, "URXD3"),
+ MTK_FUNCTION(2, "DPI_CK0"),
+ MTK_FUNCTION(3, "UTXD3"),
+ MTK_FUNCTION(4, "UCTS2"),
+ MTK_FUNCTION(5, "PWM3"),
+ MTK_FUNCTION(6, "KROW6"),
+ MTK_FUNCTION(7, "DBG_MON_A16")
+ ),
+ MTK_PIN(
+ 60, "GPIO60",
+ MTK_EINT_FUNCTION(0, 60),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO60"),
+ MTK_FUNCTION(1, "UTXD3"),
+ MTK_FUNCTION(2, "DPI_DE0"),
+ MTK_FUNCTION(3, "URXD3"),
+ MTK_FUNCTION(4, "URTS2"),
+ MTK_FUNCTION(5, "PWM4"),
+ MTK_FUNCTION(6, "KROW7"),
+ MTK_FUNCTION(7, "DBG_MON_A17")
+ ),
+ MTK_PIN(
+ 61, "GPIO61",
+ MTK_EINT_FUNCTION(0, 61),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO61"),
+ MTK_FUNCTION(1, "PCM1_CLK"),
+ MTK_FUNCTION(2, "DPI_D0"),
+ MTK_FUNCTION(3, "I2S0_BCK"),
+ MTK_FUNCTION(4, "KROW4"),
+ MTK_FUNCTION(5, "ANT_SEL3"),
+ MTK_FUNCTION(6, "IRTX_OUT"),
+ MTK_FUNCTION(7, "DBG_MON_A18")
+ ),
+ MTK_PIN(
+ 62, "GPIO62",
+ MTK_EINT_FUNCTION(0, 62),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO62"),
+ MTK_FUNCTION(1, "PCM1_SYNC"),
+ MTK_FUNCTION(2, "DPI_D1"),
+ MTK_FUNCTION(3, "I2S0_LRCK"),
+ MTK_FUNCTION(4, "KCOL7"),
+ MTK_FUNCTION(5, "CLKM3"),
+ MTK_FUNCTION(6, "CMFLASH"),
+ MTK_FUNCTION(7, "DBG_MON_A19")
+ ),
+ MTK_PIN(
+ 63, "GPIO63",
+ MTK_EINT_FUNCTION(0, 63),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO63"),
+ MTK_FUNCTION(1, "PCM1_DI"),
+ MTK_FUNCTION(2, "DPI_D2"),
+ MTK_FUNCTION(3, "I2S0_DI"),
+ MTK_FUNCTION(4, "PCM1_DO0"),
+ MTK_FUNCTION(5, "CLKM5"),
+ MTK_FUNCTION(6, "KROW3"),
+ MTK_FUNCTION(7, "DBG_MON_A20")
+ ),
+ MTK_PIN(
+ 64, "GPIO64",
+ MTK_EINT_FUNCTION(0, 64),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO64"),
+ MTK_FUNCTION(1, "PCM1_DO0"),
+ MTK_FUNCTION(2, "DPI_D3"),
+ MTK_FUNCTION(3, "I2S0_MCK"),
+ MTK_FUNCTION(4, "PCM1_DI"),
+ MTK_FUNCTION(5, "SRCLKENAI2"),
+ MTK_FUNCTION(6, "KCOL5"),
+ MTK_FUNCTION(7, "DBG_MON_A21")
+ ),
+ MTK_PIN(
+ 65, "GPIO65",
+ MTK_EINT_FUNCTION(0, 65),
+ DRV_GRP0,
+ MTK_FUNCTION(0, "GPIO65"),
+ MTK_FUNCTION(1, "SPI_CSA"),
+ MTK_FUNCTION(2, "EXT_FRAME_SYNC"),
+ MTK_FUNCTION(3, "I2S3_MCK"),
+ MTK_FUNCTION(4, "KROW2"),
+ MTK_FUNCTION(5, "GPS_FRAME_SYNC"),
+ MTK_FUNCTION(6, "PTA_RXD"),
+ MTK_FUNCTION(7, "DBG_MON_A22")
+ ),
+ MTK_PIN(
+ 66, "GPIO66",
+ MTK_EINT_FUNCTION(0, 66),
+ DRV_GRP0,
+ MTK_FUNCTION(0, "GPIO66"),
+ MTK_FUNCTION(1, "SPI_CKA"),
+ MTK_FUNCTION(2, "USB_DRVVBUS"),
+ MTK_FUNCTION(3, "I2S3_BCK"),
+ MTK_FUNCTION(4, "KCOL2"),
+ MTK_FUNCTION(6, "PTA_TXD"),
+ MTK_FUNCTION(7, "DBG_MON_A23")
+ ),
+ MTK_PIN(
+ 67, "GPIO67",
+ MTK_EINT_FUNCTION(0, 67),
+ DRV_GRP0,
+ MTK_FUNCTION(0, "GPIO67"),
+ MTK_FUNCTION(1, "SPI_MIA"),
+ MTK_FUNCTION(2, "SPI_MOA"),
+ MTK_FUNCTION(3, "I2S3_DO"),
+ MTK_FUNCTION(4, "PTA_RXD"),
+ MTK_FUNCTION(5, "IDDIG"),
+ MTK_FUNCTION(6, "UCTS1"),
+ MTK_FUNCTION(7, "DBG_MON_A24")
+ ),
+ MTK_PIN(
+ 68, "GPIO68",
+ MTK_EINT_FUNCTION(0, 68),
+ DRV_GRP0,
+ MTK_FUNCTION(0, "GPIO68"),
+ MTK_FUNCTION(1, "SPI_MOA"),
+ MTK_FUNCTION(2, "SPI_MIA"),
+ MTK_FUNCTION(3, "I2S3_LRCK"),
+ MTK_FUNCTION(4, "PTA_TXD"),
+ MTK_FUNCTION(5, "ANT_SEL4"),
+ MTK_FUNCTION(6, "URTS1"),
+ MTK_FUNCTION(7, "DBG_MON_A25")
+ ),
+ MTK_PIN(
+ 69, "GPIO69",
+ MTK_EINT_FUNCTION(0, 69),
+ DRV_GRP0,
+ MTK_FUNCTION(0, "GPIO69"),
+ MTK_FUNCTION(1, "DISP_PWM"),
+ MTK_FUNCTION(2, "PWM1"),
+ MTK_FUNCTION(3, "LTE_MD32_JTAG_TRST"),
+ MTK_FUNCTION(4, "TDD_TRSTN"),
+ MTK_FUNCTION(5, "ANT_SEL7"),
+ MTK_FUNCTION(6, "DM_JTINTP")
+ ),
+ MTK_PIN(
+ 70, "GPIO70",
+ MTK_EINT_FUNCTION(0, 70),
+ DRV_GRP0,
+ MTK_FUNCTION(0, "GPIO70"),
+ MTK_FUNCTION(1, "JTMS"),
+ MTK_FUNCTION(2, "CONN_MCU_TMS"),
+ MTK_FUNCTION(3, "LTE_MD32_JTAG_TMS"),
+ MTK_FUNCTION(4, "TDD_TMS"),
+ MTK_FUNCTION(5, "CORESONIC_SWD"),
+ MTK_FUNCTION(6, "DM_OTMS"),
+ MTK_FUNCTION(7, "DFD_TMS")
+ ),
+ MTK_PIN(
+ 71, "GPIO71",
+ MTK_EINT_FUNCTION(0, 71),
+ DRV_GRP0,
+ MTK_FUNCTION(0, "GPIO71"),
+ MTK_FUNCTION(1, "JTCK"),
+ MTK_FUNCTION(2, "CONN_MCU_TCK[1]"),
+ MTK_FUNCTION(3, "LTE_MD32_JTAG_TCK"),
+ MTK_FUNCTION(4, "TDD_TCK"),
+ MTK_FUNCTION(5, "CORESONIC_SWCK"),
+ MTK_FUNCTION(6, "DM_OTCK"),
+ MTK_FUNCTION(7, "DFD_TCK_XI")
+ ),
+ MTK_PIN(
+ 72, "GPIO72",
+ MTK_EINT_FUNCTION(0, 72),
+ DRV_GRP0,
+ MTK_FUNCTION(0, "GPIO72"),
+ MTK_FUNCTION(1, "JTDI"),
+ MTK_FUNCTION(2, "CONN_MCU_TDI"),
+ MTK_FUNCTION(3, "LTE_MD32_JTAG_TDI"),
+ MTK_FUNCTION(4, "TDD_TDI"),
+ MTK_FUNCTION(6, "DM_OTDI"),
+ MTK_FUNCTION(7, "DFD_TDI")
+ ),
+ MTK_PIN(
+ 73, "GPIO73",
+ MTK_EINT_FUNCTION(0, 73),
+ DRV_GRP0,
+ MTK_FUNCTION(0, "GPIO73"),
+ MTK_FUNCTION(1, "JTDO"),
+ MTK_FUNCTION(2, "CONN_MCU_TDO"),
+ MTK_FUNCTION(3, "LTE_MD32_JTAG_TDO"),
+ MTK_FUNCTION(4, "TDD_TDO"),
+ MTK_FUNCTION(6, "DM_OTDO"),
+ MTK_FUNCTION(7, "DFD_TDO")
+ ),
+ MTK_PIN(
+ 74, "GPIO74",
+ MTK_EINT_FUNCTION(0, 74),
+ DRV_GRP0,
+ MTK_FUNCTION(0, "GPIO74"),
+ MTK_FUNCTION(1, "URXD0"),
+ MTK_FUNCTION(2, "UTXD0"),
+ MTK_FUNCTION(3, "MD_URXD"),
+ MTK_FUNCTION(4, "SDA3"),
+ MTK_FUNCTION(5, "C2K_UART0_RXD"),
+ MTK_FUNCTION(6, "LTE_URXD"),
+ MTK_FUNCTION(7, "AUXIF_ST")
+ ),
+ MTK_PIN(
+ 75, "GPIO75",
+ MTK_EINT_FUNCTION(0, 75),
+ DRV_GRP0,
+ MTK_FUNCTION(0, "GPIO75"),
+ MTK_FUNCTION(1, "UTXD0"),
+ MTK_FUNCTION(2, "URXD0"),
+ MTK_FUNCTION(3, "MD_UTXD"),
+ MTK_FUNCTION(4, "TDD_TXD"),
+ MTK_FUNCTION(5, "C2K_UART0_TXD"),
+ MTK_FUNCTION(6, "LTE_UTXD")
+ ),
+ MTK_PIN(
+ 76, "GPIO76",
+ MTK_EINT_FUNCTION(0, 76),
+ DRV_GRP0,
+ MTK_FUNCTION(0, "GPIO76"),
+ MTK_FUNCTION(1, "URXD1"),
+ MTK_FUNCTION(2, "UTXD1"),
+ MTK_FUNCTION(3, "MD_URXD"),
+ MTK_FUNCTION(4, "SCL3"),
+ MTK_FUNCTION(5, "LTE_URXD"),
+ MTK_FUNCTION(6, "C2K_UART0_RXD"),
+ MTK_FUNCTION(7, "AUXIF_CLK")
+ ),
+ MTK_PIN(
+ 77, "GPIO77",
+ MTK_EINT_FUNCTION(0, 77),
+ DRV_GRP0,
+ MTK_FUNCTION(0, "GPIO77"),
+ MTK_FUNCTION(1, "UTXD1"),
+ MTK_FUNCTION(2, "URXD1"),
+ MTK_FUNCTION(3, "MD_UTXD"),
+ MTK_FUNCTION(4, "TDD_TXD"),
+ MTK_FUNCTION(5, "LTE_UTXD"),
+ MTK_FUNCTION(6, "C2K_UART0_TXD")
+ ),
+ MTK_PIN(
+ 78, "GPIO78",
+ MTK_EINT_FUNCTION(0, 78),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO78"),
+ MTK_FUNCTION(1, "I2S0_DI"),
+ MTK_FUNCTION(2, "PCM1_DI"),
+ MTK_FUNCTION(3, "I2S3_DO"),
+ MTK_FUNCTION(4, "I2S1_DO"),
+ MTK_FUNCTION(5, "PWM0"),
+ MTK_FUNCTION(6, "I2S2_DI"),
+ MTK_FUNCTION(7, "DBG_MON_A26")
+ ),
+ MTK_PIN(
+ 79, "GPIO79",
+ MTK_EINT_FUNCTION(0, 79),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO79"),
+ MTK_FUNCTION(1, "I2S0_LRCK"),
+ MTK_FUNCTION(2, "PCM1_SYNC"),
+ MTK_FUNCTION(3, "I2S3_LRCK"),
+ MTK_FUNCTION(4, "I2S1_LRCK"),
+ MTK_FUNCTION(5, "PWM3"),
+ MTK_FUNCTION(6, "I2S2_LRCK"),
+ MTK_FUNCTION(7, "DBG_MON_A27")
+ ),
+ MTK_PIN(
+ 80, "GPIO80",
+ MTK_EINT_FUNCTION(0, 80),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO80"),
+ MTK_FUNCTION(1, "I2S0_BCK"),
+ MTK_FUNCTION(2, "PCM1_CLK[1]"),
+ MTK_FUNCTION(3, "I2S3_BCK"),
+ MTK_FUNCTION(4, "I2S1_BCK"),
+ MTK_FUNCTION(5, "PWM4"),
+ MTK_FUNCTION(6, "I2S2_BCK"),
+ MTK_FUNCTION(7, "DBG_MON_A28")
+ ),
+ MTK_PIN(
+ 81, "GPIO81",
+ MTK_EINT_FUNCTION(0, 81),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO81"),
+ MTK_FUNCTION(1, "KROW0"),
+ MTK_FUNCTION(3, "CONN_MCU_DBGI_N"),
+ MTK_FUNCTION(4, "CORESONIC_SWCK"),
+ MTK_FUNCTION(5, "C2K_TCK"),
+ MTK_FUNCTION(7, "C2K_DM_EINT1")
+ ),
+ MTK_PIN(
+ 82, "GPIO82",
+ MTK_EINT_FUNCTION(0, 82),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO82"),
+ MTK_FUNCTION(1, "KROW1"),
+ MTK_FUNCTION(3, "CONN_MCU_TRST_B"),
+ MTK_FUNCTION(4, "CORESONIC_SWD"),
+ MTK_FUNCTION(5, "C2K_NTRST"),
+ MTK_FUNCTION(6, "USB_DRVVBUS"),
+ MTK_FUNCTION(7, "C2K_DM_EINT2")
+ ),
+ MTK_PIN(
+ 83, "GPIO83",
+ MTK_EINT_FUNCTION(0, 83),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO83"),
+ MTK_FUNCTION(1, "KROW2"),
+ MTK_FUNCTION(2, "USB_DRVVBUS"),
+ MTK_FUNCTION(5, "C2K_TDI"),
+ MTK_FUNCTION(7, "C2K_DM_EINT3")
+ ),
+ MTK_PIN(
+ 84, "GPIO84",
+ MTK_EINT_FUNCTION(0, 84),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO84"),
+ MTK_FUNCTION(1, "KCOL0"),
+ MTK_FUNCTION(2, "URTS0"),
+ MTK_FUNCTION(3, "CONN_MCU_DBGACK_N"),
+ MTK_FUNCTION(4, "SCL2"),
+ MTK_FUNCTION(5, "C2K_TDO"),
+ MTK_FUNCTION(6, "AUXIF_CLK")
+ ),
+ MTK_PIN(
+ 85, "GPIO85",
+ MTK_EINT_FUNCTION(0, 85),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO85"),
+ MTK_FUNCTION(1, "KCOL1"),
+ MTK_FUNCTION(2, "UCTS0"),
+ MTK_FUNCTION(3, "UCTS1"),
+ MTK_FUNCTION(4, "SDA2"),
+ MTK_FUNCTION(5, "C2K_TMS"),
+ MTK_FUNCTION(6, "AUXIF_ST"),
+ MTK_FUNCTION(7, "DBG_MON_A31")
+ ),
+ MTK_PIN(
+ 86, "GPIO86",
+ MTK_EINT_FUNCTION(0, 86),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO86"),
+ MTK_FUNCTION(1, "KCOL2"),
+ MTK_FUNCTION(3, "URTS1"),
+ MTK_FUNCTION(5, "C2K_RTCK"),
+ MTK_FUNCTION(7, "DBG_MON_A32")
+ ),
+ MTK_PIN(
+ 87, "GPIO87",
+ MTK_EINT_FUNCTION(0, 87),
+ DRV_GRP0,
+ MTK_FUNCTION(0, "GPIO87"),
+ MTK_FUNCTION(1, "BPI_BUS5"),
+ MTK_FUNCTION(2, "LTE_C2K_BPI_BUS5"),
+ MTK_FUNCTION(5, "C2K_BPI_BUS5"),
+ MTK_FUNCTION(7, "DBG_MON_B0")
+ ),
+ MTK_PIN(
+ 88, "GPIO88",
+ MTK_EINT_FUNCTION(0, 88),
+ DRV_GRP0,
+ MTK_FUNCTION(0, "GPIO88"),
+ MTK_FUNCTION(1, "BPI_BUS6"),
+ MTK_FUNCTION(2, "LTE_C2K_BPI_BUS6"),
+ MTK_FUNCTION(5, "C2K_BPI_BUS6"),
+ MTK_FUNCTION(7, "DBG_MON_B1")
+ ),
+ MTK_PIN(
+ 89, "GPIO89",
+ MTK_EINT_FUNCTION(0, 89),
+ DRV_GRP0,
+ MTK_FUNCTION(0, "GPIO89"),
+ MTK_FUNCTION(1, "BPI_BUS7"),
+ MTK_FUNCTION(2, "LTE_C2K_BPI_BUS7"),
+ MTK_FUNCTION(3, "CLKM0"),
+ MTK_FUNCTION(5, "C2K_BPI_BUS7"),
+ MTK_FUNCTION(7, "DBG_MON_B2")
+ ),
+ MTK_PIN(
+ 90, "GPIO90",
+ MTK_EINT_FUNCTION(0, 90),
+ DRV_GRP0,
+ MTK_FUNCTION(0, "GPIO90"),
+ MTK_FUNCTION(1, "BPI_BUS8"),
+ MTK_FUNCTION(2, "LTE_C2K_BPI_BUS8"),
+ MTK_FUNCTION(3, "CLKM1"),
+ MTK_FUNCTION(5, "C2K_BPI_BUS8"),
+ MTK_FUNCTION(7, "DBG_MON_B3")
+ ),
+ MTK_PIN(
+ 91, "GPIO91",
+ MTK_EINT_FUNCTION(0, 91),
+ DRV_GRP0,
+ MTK_FUNCTION(0, "GPIO91"),
+ MTK_FUNCTION(1, "BPI_BUS9"),
+ MTK_FUNCTION(2, "LTE_C2K_BPI_BUS9"),
+ MTK_FUNCTION(3, "CLKM2"),
+ MTK_FUNCTION(5, "C2K_BPI_BUS9"),
+ MTK_FUNCTION(7, "DBG_MON_B4")
+ ),
+ MTK_PIN(
+ 92, "GPIO92",
+ MTK_EINT_FUNCTION(0, 92),
+ DRV_GRP0,
+ MTK_FUNCTION(0, "GPIO92"),
+ MTK_FUNCTION(1, "BPI_BUS10"),
+ MTK_FUNCTION(2, "LTE_C2K_BPI_BUS10"),
+ MTK_FUNCTION(3, "CLKM3"),
+ MTK_FUNCTION(5, "C2K_BPI_BUS10"),
+ MTK_FUNCTION(7, "DBG_MON_B5")
+ ),
+ MTK_PIN(
+ 93, "GPIO93",
+ MTK_EINT_FUNCTION(0, 93),
+ DRV_GRP0,
+ MTK_FUNCTION(0, "GPIO93"),
+ MTK_FUNCTION(1, "BPI_BUS11"),
+ MTK_FUNCTION(2, "LTE_C2K_BPI_BUS11"),
+ MTK_FUNCTION(5, "C2K_BPI_BUS11"),
+ MTK_FUNCTION(7, "DBG_MON_B6")
+ ),
+ MTK_PIN(
+ 94, "GPIO94",
+ MTK_EINT_FUNCTION(0, 94),
+ DRV_GRP0,
+ MTK_FUNCTION(0, "GPIO94"),
+ MTK_FUNCTION(1, "BPI_BUS12"),
+ MTK_FUNCTION(2, "LTE_C2K_BPI_BUS12"),
+ MTK_FUNCTION(5, "C2K_BPI_BUS12"),
+ MTK_FUNCTION(7, "DBG_MON_B7")
+ ),
+ MTK_PIN(
+ 95, "GPIO95",
+ MTK_EINT_FUNCTION(0, 95),
+ DRV_GRP0,
+ MTK_FUNCTION(0, "GPIO95"),
+ MTK_FUNCTION(1, "BPI_BUS13"),
+ MTK_FUNCTION(2, "LTE_C2K_BPI_BUS13"),
+ MTK_FUNCTION(5, "C2K_BPI_BUS13"),
+ MTK_FUNCTION(7, "DBG_MON_B8")
+ ),
+ MTK_PIN(
+ 96, "GPIO96",
+ MTK_EINT_FUNCTION(0, 96),
+ DRV_GRP0,
+ MTK_FUNCTION(0, "GPIO96"),
+ MTK_FUNCTION(1, "BPI_BUS14"),
+ MTK_FUNCTION(2, "LTE_C2K_BPI_BUS14"),
+ MTK_FUNCTION(5, "C2K_BPI_BUS14"),
+ MTK_FUNCTION(7, "DBG_MON_B9")
+ ),
+ MTK_PIN(
+ 97, "GPIO97",
+ MTK_EINT_FUNCTION(0, 97),
+ DRV_GRP0,
+ MTK_FUNCTION(0, "GPIO97"),
+ MTK_FUNCTION(1, "BPI_BUS15"),
+ MTK_FUNCTION(2, "LTE_C2K_BPI_BUS15"),
+ MTK_FUNCTION(5, "C2K_BPI_BUS15"),
+ MTK_FUNCTION(7, "DBG_MON_B10")
+ ),
+ MTK_PIN(
+ 98, "GPIO98",
+ MTK_EINT_FUNCTION(0, 98),
+ DRV_GRP0,
+ MTK_FUNCTION(0, "GPIO98"),
+ MTK_FUNCTION(1, "BPI_BUS16"),
+ MTK_FUNCTION(2, "LTE_C2K_BPI_BUS16"),
+ MTK_FUNCTION(5, "C2K_BPI_BUS16"),
+ MTK_FUNCTION(7, "DBG_MON_B11")
+ ),
+ MTK_PIN(
+ 99, "GPIO99",
+ MTK_EINT_FUNCTION(0, 99),
+ DRV_GRP0,
+ MTK_FUNCTION(0, "GPIO99"),
+ MTK_FUNCTION(1, "BPI_BUS17"),
+ MTK_FUNCTION(2, "LTE_C2K_BPI_BUS17"),
+ MTK_FUNCTION(5, "C2K_BPI_BUS17"),
+ MTK_FUNCTION(7, "DBG_MON_B12")
+ ),
+ MTK_PIN(
+ 100, "GPIO100",
+ MTK_EINT_FUNCTION(0, 100),
+ DRV_GRP0,
+ MTK_FUNCTION(0, "GPIO100"),
+ MTK_FUNCTION(1, "BPI_BUS18"),
+ MTK_FUNCTION(2, "LTE_C2K_BPI_BUS18"),
+ MTK_FUNCTION(5, "C2K_BPI_BUS18"),
+ MTK_FUNCTION(7, "DBG_MON_B13")
+ ),
+ MTK_PIN(
+ 101, "GPIO101",
+ MTK_EINT_FUNCTION(0, 101),
+ DRV_GRP0,
+ MTK_FUNCTION(0, "GPIO101"),
+ MTK_FUNCTION(1, "BPI_BUS19"),
+ MTK_FUNCTION(2, "LTE_C2K_BPI_BUS19"),
+ MTK_FUNCTION(5, "C2K_BPI_BUS19"),
+ MTK_FUNCTION(7, "DBG_MON_B14")
+ ),
+ MTK_PIN(
+ 102, "GPIO102",
+ MTK_EINT_FUNCTION(0, 102),
+ DRV_GRP0,
+ MTK_FUNCTION(0, "GPIO102"),
+ MTK_FUNCTION(1, "BPI_BUS20"),
+ MTK_FUNCTION(2, "LTE_C2K_BPI_BUS20"),
+ MTK_FUNCTION(5, "C2K_BPI_BUS20"),
+ MTK_FUNCTION(7, "DBG_MON_B15")
+ ),
+ MTK_PIN(
+ 103, "GPIO103",
+ MTK_EINT_FUNCTION(0, 103),
+ DRV_GRP0,
+ MTK_FUNCTION(0, "GPIO103"),
+ MTK_FUNCTION(1, "C2K_TXBPI"),
+ MTK_FUNCTION(7, "DBG_MON_B16")
+ ),
+ MTK_PIN(
+ 104, "GPIO104",
+ MTK_EINT_FUNCTION(0, 104),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO104"),
+ MTK_FUNCTION(1, "RFIC1_BSI_EN"),
+ MTK_FUNCTION(5, "C2K_RX_BSI_EN"),
+ MTK_FUNCTION(7, "DBG_MON_B17")
+ ),
+ MTK_PIN(
+ 105, "GPIO105",
+ MTK_EINT_FUNCTION(0, 105),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO105"),
+ MTK_FUNCTION(1, "RFIC1_BSI_CK"),
+ MTK_FUNCTION(5, "C2K_RX_BSI_CLK"),
+ MTK_FUNCTION(7, "DBG_MON_B18")
+ ),
+ MTK_PIN(
+ 106, "GPIO106",
+ MTK_EINT_FUNCTION(0, 106),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO106"),
+ MTK_FUNCTION(1, "RFIC1_BSI_D0"),
+ MTK_FUNCTION(5, "C2K_RX_BSI_DATA"),
+ MTK_FUNCTION(7, "DBG_MON_B19")
+ ),
+ MTK_PIN(
+ 107, "GPIO107",
+ MTK_EINT_FUNCTION(0, 107),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO107"),
+ MTK_FUNCTION(1, "RFIC1_BSI_D1"),
+ MTK_FUNCTION(5, "C2K_TX_BSI_EN"),
+ MTK_FUNCTION(7, "DBG_MON_B20")
+ ),
+ MTK_PIN(
+ 108, "GPIO108",
+ MTK_EINT_FUNCTION(0, 108),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO108"),
+ MTK_FUNCTION(1, "RFIC1_BSI_D2"),
+ MTK_FUNCTION(5, "C2K_TX_BSI_CLK"),
+ MTK_FUNCTION(7, "DBG_MON_B21")
+ ),
+ MTK_PIN(
+ 109, "GPIO109",
+ MTK_EINT_FUNCTION(0, 109),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO109"),
+ MTK_FUNCTION(5, "C2K_TX_BSI_DATA"),
+ MTK_FUNCTION(7, "DBG_MON_B22")
+ ),
+ MTK_PIN(
+ 110, "GPIO110",
+ MTK_EINT_FUNCTION(0, 110),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO110"),
+ MTK_FUNCTION(1, "RFIC0_BSI_EN"),
+ MTK_FUNCTION(4, "SPM_BSI_EN"),
+ MTK_FUNCTION(7, "DBG_MON_B23")
+ ),
+ MTK_PIN(
+ 111, "GPIO111",
+ MTK_EINT_FUNCTION(0, 111),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO111"),
+ MTK_FUNCTION(1, "RFIC0_BSI_CK"),
+ MTK_FUNCTION(4, "SPM_BSI_CLK"),
+ MTK_FUNCTION(7, "DBG_MON_B24")
+ ),
+ MTK_PIN(
+ 112, "GPIO112",
+ MTK_EINT_FUNCTION(0, 112),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO112"),
+ MTK_FUNCTION(1, "RFIC0_BSI_D2"),
+ MTK_FUNCTION(4, "SPM_BSI_D2"),
+ MTK_FUNCTION(7, "DBG_MON_B25")
+ ),
+ MTK_PIN(
+ 113, "GPIO113",
+ MTK_EINT_FUNCTION(0, 113),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO113"),
+ MTK_FUNCTION(1, "RFIC0_BSI_D1"),
+ MTK_FUNCTION(4, "SPM_BSI_D1"),
+ MTK_FUNCTION(7, "DBG_MON_B26")
+ ),
+ MTK_PIN(
+ 114, "GPIO114",
+ MTK_EINT_FUNCTION(0, 114),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO114"),
+ MTK_FUNCTION(1, "RFIC0_BSI_D0"),
+ MTK_FUNCTION(4, "SPM_BSI_D0"),
+ MTK_FUNCTION(7, "DBG_MON_B27")
+ ),
+ MTK_PIN(
+ 115, "GPIO115",
+ MTK_EINT_FUNCTION(0, 115),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO115"),
+ MTK_FUNCTION(1, "AUXIN0")
+ ),
+ MTK_PIN(
+ 116, "GPIO116",
+ MTK_EINT_FUNCTION(0, 116),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO116"),
+ MTK_FUNCTION(1, "AUXIN1")
+ ),
+ MTK_PIN(
+ 117, "GPIO117",
+ MTK_EINT_FUNCTION(0, 117),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO117"),
+ MTK_FUNCTION(1, "AUXIN2")
+ ),
+ MTK_PIN(
+ 118, "GPIO118",
+ MTK_EINT_FUNCTION(0, 118),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO118"),
+ MTK_FUNCTION(1, "TXBPI")
+ ),
+ MTK_PIN(
+ 119, "GPIO119",
+ MTK_EINT_FUNCTION(0, 119),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO119"),
+ MTK_FUNCTION(1, "BPI_BUS0"),
+ MTK_FUNCTION(7, "DBG_MON_B28")
+ ),
+ MTK_PIN(
+ 120, "GPIO120",
+ MTK_EINT_FUNCTION(0, 120),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO120"),
+ MTK_FUNCTION(1, "BPI_BUS1"),
+ MTK_FUNCTION(7, "DBG_MON_B29")
+ ),
+ MTK_PIN(
+ 121, "GPIO121",
+ MTK_EINT_FUNCTION(0, 121),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO121"),
+ MTK_FUNCTION(1, "BPI_BUS2"),
+ MTK_FUNCTION(7, "DBG_MON_B30")
+ ),
+ MTK_PIN(
+ 122, "GPIO122",
+ MTK_EINT_FUNCTION(0, 122),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO122"),
+ MTK_FUNCTION(1, "BPI_BUS3"),
+ MTK_FUNCTION(7, "DBG_MON_B31")
+ ),
+ MTK_PIN(
+ 123, "GPIO123",
+ MTK_EINT_FUNCTION(0, 123),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO123"),
+ MTK_FUNCTION(1, "BPI_BUS4"),
+ MTK_FUNCTION(7, "DBG_MON_B32")
+ ),
+ MTK_PIN(
+ 124, "GPIO124",
+ MTK_EINT_FUNCTION(0, 124),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO124"),
+ MTK_FUNCTION(1, "BPI_BUS21"),
+ MTK_FUNCTION(5, "DPI_HSYNC1"),
+ MTK_FUNCTION(6, "KCOL2"),
+ MTK_FUNCTION(7, "TDD_TXD")
+ ),
+ MTK_PIN(
+ 125, "GPIO125",
+ MTK_EINT_FUNCTION(0, 125),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO125"),
+ MTK_FUNCTION(1, "BPI_BUS22"),
+ MTK_FUNCTION(5, "DPI_VSYNC1"),
+ MTK_FUNCTION(6, "KROW2"),
+ MTK_FUNCTION(7, "MD_URXD")
+ ),
+ MTK_PIN(
+ 126, "GPIO126",
+ MTK_EINT_FUNCTION(0, 126),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO126"),
+ MTK_FUNCTION(1, "BPI_BUS23"),
+ MTK_FUNCTION(5, "DPI_CK1"),
+ MTK_FUNCTION(6, "I2S2_MCK"),
+ MTK_FUNCTION(7, "MD_UTXD")
+ ),
+ MTK_PIN(
+ 127, "GPIO127",
+ MTK_EINT_FUNCTION(0, 127),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO127"),
+ MTK_FUNCTION(1, "BPI_BUS24"),
+ MTK_FUNCTION(3, "CONN_MCU_DBGI_N"),
+ MTK_FUNCTION(4, "EXT_FRAME_SYNC"),
+ MTK_FUNCTION(5, "DPI_DE1"),
+ MTK_FUNCTION(6, "SRCLKENAI1"),
+ MTK_FUNCTION(7, "URXD0")
+ ),
+ MTK_PIN(
+ 128, "GPIO128",
+ MTK_EINT_FUNCTION(0, 128),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO128"),
+ MTK_FUNCTION(1, "BPI_BUS25"),
+ MTK_FUNCTION(3, "GPS_FRAME_SYNC"),
+ MTK_FUNCTION(5, "I2S2_DI"),
+ MTK_FUNCTION(6, "PTA_RXD"),
+ MTK_FUNCTION(7, "UTXD0")
+ ),
+ MTK_PIN(
+ 129, "GPIO129",
+ MTK_EINT_FUNCTION(0, 129),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO129"),
+ MTK_FUNCTION(1, "BPI_BUS26"),
+ MTK_FUNCTION(2, "DISP_PWM"),
+ MTK_FUNCTION(5, "I2S2_LRCK"),
+ MTK_FUNCTION(6, "PTA_TXD"),
+ MTK_FUNCTION(7, "LTE_URXD")
+ ),
+ MTK_PIN(
+ 130, "GPIO130",
+ MTK_EINT_FUNCTION(0, 130),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO130"),
+ MTK_FUNCTION(1, "BPI_BUS27"),
+ MTK_FUNCTION(5, "I2S2_BCK"),
+ MTK_FUNCTION(6, "IRTX_OUT"),
+ MTK_FUNCTION(7, "LTE_UTXD")
+ ),
+ MTK_PIN(
+ 131, "GPIO131",
+ MTK_EINT_FUNCTION(0, 131),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO131"),
+ MTK_FUNCTION(1, "LTE_PAVM0")
+ ),
+ MTK_PIN(
+ 132, "GPIO132",
+ MTK_EINT_FUNCTION(0, 132),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO132"),
+ MTK_FUNCTION(1, "LTE_PAVM1")
+ ),
+ MTK_PIN(
+ 133, "GPIO133",
+ MTK_EINT_FUNCTION(0, 133),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO133"),
+ MTK_FUNCTION(1, "MIPI1_SCLK")
+ ),
+ MTK_PIN(
+ 134, "GPIO134",
+ MTK_EINT_FUNCTION(0, 134),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO134"),
+ MTK_FUNCTION(1, "MIPI1_SDATA")
+ ),
+ MTK_PIN(
+ 135, "GPIO135",
+ MTK_EINT_FUNCTION(0, 135),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO135"),
+ MTK_FUNCTION(1, "MIPI0_SCLK")
+ ),
+ MTK_PIN(
+ 136, "GPIO136",
+ MTK_EINT_FUNCTION(0, 136),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO136"),
+ MTK_FUNCTION(1, "MIPI0_SDATA")
+ ),
+ MTK_PIN(
+ 137, "GPIO137",
+ MTK_EINT_FUNCTION(0, 137),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO137"),
+ MTK_FUNCTION(1, "RTC32K_CK")
+ ),
+ MTK_PIN(
+ 138, "GPIO138",
+ MTK_EINT_FUNCTION(0, 138),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO138"),
+ MTK_FUNCTION(1, "PWRAP_SPIDO"),
+ MTK_FUNCTION(2, "PWRAP_SPIDI")
+ ),
+ MTK_PIN(
+ 139, "GPIO139",
+ MTK_EINT_FUNCTION(0, 139),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO139"),
+ MTK_FUNCTION(1, "PWRAP_SPIDI"),
+ MTK_FUNCTION(2, "PWRAP_SPIDO")
+ ),
+ MTK_PIN(
+ 140, "GPIO140",
+ MTK_EINT_FUNCTION(0, 140),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO140"),
+ MTK_FUNCTION(3, "LTE_MD32_JTAG_TRST"),
+ MTK_FUNCTION(4, "TDD_TRSTN"),
+ MTK_FUNCTION(5, "DM_JTINTP")
+ ),
+ MTK_PIN(
+ 141, "GPIO141",
+ MTK_EINT_FUNCTION(0, 141),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO141"),
+ MTK_FUNCTION(1, "PWRAP_SPICK_I")
+ ),
+ MTK_PIN(
+ 142, "GPIO142",
+ MTK_EINT_FUNCTION(0, 142),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO142"),
+ MTK_FUNCTION(1, "PWRAP_SPICS_B_I")
+ ),
+ MTK_PIN(
+ 143, "GPIO143",
+ MTK_EINT_FUNCTION(0, 143),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO143"),
+ MTK_FUNCTION(1, "AUD_CLK_MOSI")
+ ),
+ MTK_PIN(
+ 144, "GPIO144",
+ MTK_EINT_FUNCTION(0, 144),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO144"),
+ MTK_FUNCTION(1, "AUD_DAT_MISO"),
+ MTK_FUNCTION(3, "AUD_DAT_MOSI")
+ ),
+ MTK_PIN(
+ 145, "GPIO145",
+ MTK_EINT_FUNCTION(0, 145),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO145"),
+ MTK_FUNCTION(1, "AUD_DAT_MOSI"),
+ MTK_FUNCTION(3, "AUD_DAT_MISO")
+ ),
+ MTK_PIN(
+ 146, "GPIO146",
+ MTK_EINT_FUNCTION(0, 146),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO146"),
+ MTK_FUNCTION(1, "LCM_RST")
+ ),
+ MTK_PIN(
+ 147, "GPIO147",
+ MTK_EINT_FUNCTION(0, 147),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO147"),
+ MTK_FUNCTION(1, "DSI_TE")
+ ),
+ MTK_PIN(
+ 148, "GPIO148",
+ MTK_EINT_FUNCTION(0, 148),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO148"),
+ MTK_FUNCTION(1, "SRCLKENA")
+ ),
+ MTK_PIN(
+ 149, "GPIO149",
+ MTK_EINT_FUNCTION(0, 149),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO149"),
+ MTK_FUNCTION(1, "WATCHDOG")
+ ),
+ MTK_PIN(
+ 150, "GPIO150",
+ MTK_EINT_FUNCTION(0, 150),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO150"),
+ MTK_FUNCTION(1, "TDP0")
+ ),
+ MTK_PIN(
+ 151, "GPIO151",
+ MTK_EINT_FUNCTION(0, 151),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO151"),
+ MTK_FUNCTION(1, "TDN0")
+ ),
+ MTK_PIN(
+ 152, "GPIO152",
+ MTK_EINT_FUNCTION(0, 152),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO152"),
+ MTK_FUNCTION(1, "TDP1")
+ ),
+ MTK_PIN(
+ 153, "GPIO153",
+ MTK_EINT_FUNCTION(0, 153),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO153"),
+ MTK_FUNCTION(1, "TDN1")
+ ),
+ MTK_PIN(
+ 154, "GPIO154",
+ MTK_EINT_FUNCTION(0, 154),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO154"),
+ MTK_FUNCTION(1, "TCP")
+ ),
+ MTK_PIN(
+ 155, "GPIO155",
+ MTK_EINT_FUNCTION(0, 155),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO155"),
+ MTK_FUNCTION(1, "TCN")
+ ),
+ MTK_PIN(
+ 156, "GPIO156",
+ MTK_EINT_FUNCTION(0, 156),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO156"),
+ MTK_FUNCTION(1, "TDP2")
+ ),
+ MTK_PIN(
+ 157, "GPIO157",
+ MTK_EINT_FUNCTION(0, 157),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO157"),
+ MTK_FUNCTION(1, "TDN2")
+ ),
+ MTK_PIN(
+ 158, "GPIO158",
+ MTK_EINT_FUNCTION(0, 158),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO158"),
+ MTK_FUNCTION(1, "TDP3")
+ ),
+ MTK_PIN(
+ 159, "GPIO159",
+ MTK_EINT_FUNCTION(0, 159),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO159"),
+ MTK_FUNCTION(1, "TDN3")
+ ),
+ MTK_PIN(
+ 160, "GPIO160",
+ MTK_EINT_FUNCTION(0, 160),
+ DRV_GRP0,
+ MTK_FUNCTION(0, "GPIO160"),
+ MTK_FUNCTION(1, "MD_SIM2_SCLK"),
+ MTK_FUNCTION(2, "MD_SIM1_SCLK"),
+ MTK_FUNCTION(3, "UIM0_CLK"),
+ MTK_FUNCTION(4, "UIM1_CLK")
+ ),
+ MTK_PIN(
+ 161, "GPIO161",
+ MTK_EINT_FUNCTION(0, 161),
+ DRV_GRP0,
+ MTK_FUNCTION(0, "GPIO161"),
+ MTK_FUNCTION(1, "MD_SIM2_SRST"),
+ MTK_FUNCTION(2, "MD_SIM1_SRST"),
+ MTK_FUNCTION(3, "UIM0_RST"),
+ MTK_FUNCTION(4, "UIM1_RST")
+ ),
+ MTK_PIN(
+ 162, "GPIO162",
+ MTK_EINT_FUNCTION(0, 162),
+ DRV_GRP0,
+ MTK_FUNCTION(0, "GPIO162"),
+ MTK_FUNCTION(1, "MD_SIM2_SDAT"),
+ MTK_FUNCTION(2, "MD_SIM1_SDAT"),
+ MTK_FUNCTION(3, "UIM0_IO"),
+ MTK_FUNCTION(4, "UIM1_IO")
+ ),
+ MTK_PIN(
+ 163, "GPIO163",
+ MTK_EINT_FUNCTION(0, 163),
+ DRV_GRP0,
+ MTK_FUNCTION(0, "GPIO163"),
+ MTK_FUNCTION(1, "MD_SIM1_SCLK"),
+ MTK_FUNCTION(2, "MD_SIM2_SCLK"),
+ MTK_FUNCTION(3, "UIM1_CLK"),
+ MTK_FUNCTION(4, "UIM0_CLK")
+ ),
+ MTK_PIN(
+ 164, "GPIO164",
+ MTK_EINT_FUNCTION(0, 164),
+ DRV_GRP0,
+ MTK_FUNCTION(0, "GPIO164"),
+ MTK_FUNCTION(1, "MD_SIM1_SRST"),
+ MTK_FUNCTION(2, "MD_SIM2_SRST"),
+ MTK_FUNCTION(3, "UIM1_RST"),
+ MTK_FUNCTION(4, "UIM0_RST")
+ ),
+ MTK_PIN(
+ 165, "GPIO165",
+ MTK_EINT_FUNCTION(0, 165),
+ DRV_GRP0,
+ MTK_FUNCTION(0, "GPIO165"),
+ MTK_FUNCTION(1, "MD_SIM1_SDAT"),
+ MTK_FUNCTION(2, "MD_SIM2_SDAT"),
+ MTK_FUNCTION(3, "UIM1_IO"),
+ MTK_FUNCTION(4, "UIM0_IO")
+ ),
+ MTK_PIN(
+ 166, "GPIO166",
+ MTK_EINT_FUNCTION(0, 166),
+ DRV_GRP4,
+ MTK_FUNCTION(0, "GPIO166"),
+ MTK_FUNCTION(1, "MSDC1_CMD"),
+ MTK_FUNCTION(2, "LTE_MD32_JTAG_TMS"),
+ MTK_FUNCTION(3, "C2K_TMS"),
+ MTK_FUNCTION(4, "TDD_TMS"),
+ MTK_FUNCTION(5, "CONN_DSP_JMS"),
+ MTK_FUNCTION(6, "JTMS"),
+ MTK_FUNCTION(7, "CONN_MCU_AICE_TMSC")
+ ),
+ MTK_PIN(
+ 167, "GPIO167",
+ MTK_EINT_FUNCTION(0, 167),
+ DRV_GRP4,
+ MTK_FUNCTION(0, "GPIO167"),
+ MTK_FUNCTION(1, "MSDC1_CLK"),
+ MTK_FUNCTION(2, "LTE_MD32_JTAG_TCK"),
+ MTK_FUNCTION(3, "C2K_TCK"),
+ MTK_FUNCTION(4, "TDD_TCK"),
+ MTK_FUNCTION(5, "CONN_DSP_JCK"),
+ MTK_FUNCTION(6, "JTCK"),
+ MTK_FUNCTION(7, "CONN_MCU_AICE_TCKC")
+ ),
+ MTK_PIN(
+ 168, "GPIO168",
+ MTK_EINT_FUNCTION(0, 168),
+ DRV_GRP4,
+ MTK_FUNCTION(0, "GPIO168"),
+ MTK_FUNCTION(1, "MSDC1_DAT0"),
+ MTK_FUNCTION(2, "LTE_MD32_JTAG_TDI"),
+ MTK_FUNCTION(3, "C2K_TDI"),
+ MTK_FUNCTION(4, "TDD_TDI"),
+ MTK_FUNCTION(5, "CONN_DSP_JDI"),
+ MTK_FUNCTION(6, "JTDI")
+ ),
+ MTK_PIN(
+ 169, "GPIO169",
+ MTK_EINT_FUNCTION(0, 169),
+ DRV_GRP4,
+ MTK_FUNCTION(0, "GPIO169"),
+ MTK_FUNCTION(1, "MSDC1_DAT1"),
+ MTK_FUNCTION(2, "LTE_MD32_JTAG_TDO"),
+ MTK_FUNCTION(3, "C2K_TDO"),
+ MTK_FUNCTION(4, "TDD_TDO"),
+ MTK_FUNCTION(5, "CONN_DSP_JDO"),
+ MTK_FUNCTION(6, "JTDO")
+ ),
+ MTK_PIN(
+ 170, "GPIO170",
+ MTK_EINT_FUNCTION(0, 170),
+ DRV_GRP4,
+ MTK_FUNCTION(0, "GPIO170"),
+ MTK_FUNCTION(1, "MSDC1_DAT2"),
+ MTK_FUNCTION(2, "LTE_MD32_JTAG_TRST"),
+ MTK_FUNCTION(3, "C2K_NTRST"),
+ MTK_FUNCTION(4, "TDD_TRSTN"),
+ MTK_FUNCTION(5, "CONN_DSP_JINTP"),
+ MTK_FUNCTION(6, "DM_JTINTP")
+ ),
+ MTK_PIN(
+ 171, "GPIO171",
+ MTK_EINT_FUNCTION(0, 171),
+ DRV_GRP4,
+ MTK_FUNCTION(0, "GPIO171"),
+ MTK_FUNCTION(1, "MSDC1_DAT3"),
+ MTK_FUNCTION(3, "C2K_RTCK")
+ ),
+ MTK_PIN(
+ 172, "GPIO172",
+ MTK_EINT_FUNCTION(0, 172),
+ DRV_GRP4,
+ MTK_FUNCTION(0, "GPIO172"),
+ MTK_FUNCTION(1, "MSDC0_CMD")
+ ),
+ MTK_PIN(
+ 173, "GPIO173",
+ MTK_EINT_FUNCTION(0, 173),
+ DRV_GRP4,
+ MTK_FUNCTION(0, "GPIO173"),
+ MTK_FUNCTION(1, "MSDC0_DSL")
+ ),
+ MTK_PIN(
+ 174, "GPIO174",
+ MTK_EINT_FUNCTION(0, 174),
+ DRV_GRP4,
+ MTK_FUNCTION(0, "GPIO174"),
+ MTK_FUNCTION(1, "MSDC0_CLK")
+ ),
+ MTK_PIN(
+ 175, "GPIO175",
+ MTK_EINT_FUNCTION(0, 175),
+ DRV_GRP4,
+ MTK_FUNCTION(0, "GPIO175"),
+ MTK_FUNCTION(1, "MSDC0_DAT0")
+ ),
+ MTK_PIN(
+ 176, "GPIO176",
+ MTK_EINT_FUNCTION(0, 176),
+ DRV_GRP4,
+ MTK_FUNCTION(0, "GPIO176"),
+ MTK_FUNCTION(1, "MSDC0_DAT1")
+ ),
+ MTK_PIN(
+ 177, "GPIO177",
+ MTK_EINT_FUNCTION(0, 177),
+ DRV_GRP4,
+ MTK_FUNCTION(0, "GPIO177"),
+ MTK_FUNCTION(1, "MSDC0_DAT2")
+ ),
+ MTK_PIN(
+ 178, "GPIO178",
+ MTK_EINT_FUNCTION(0, 178),
+ DRV_GRP4,
+ MTK_FUNCTION(0, "GPIO178"),
+ MTK_FUNCTION(1, "MSDC0_DAT3")
+ ),
+ MTK_PIN(
+ 179, "GPIO179",
+ MTK_EINT_FUNCTION(0, 179),
+ DRV_GRP4,
+ MTK_FUNCTION(0, "GPIO179"),
+ MTK_FUNCTION(1, "MSDC0_DAT4")
+ ),
+ MTK_PIN(
+ 180, "GPIO180",
+ MTK_EINT_FUNCTION(0, 180),
+ DRV_GRP4,
+ MTK_FUNCTION(0, "GPIO180"),
+ MTK_FUNCTION(1, "MSDC0_DAT5")
+ ),
+ MTK_PIN(
+ 181, "GPIO181",
+ MTK_EINT_FUNCTION(0, 181),
+ DRV_GRP4,
+ MTK_FUNCTION(0, "GPIO181"),
+ MTK_FUNCTION(1, "MSDC0_DAT6")
+ ),
+ MTK_PIN(
+ 182, "GPIO182",
+ MTK_EINT_FUNCTION(0, 182),
+ DRV_GRP4,
+ MTK_FUNCTION(0, "GPIO182"),
+ MTK_FUNCTION(1, "MSDC0_DAT7")
+ ),
+ MTK_PIN(
+ 183, "GPIO183",
+ MTK_EINT_FUNCTION(0, 183),
+ DRV_GRP4,
+ MTK_FUNCTION(0, "GPIO183"),
+ MTK_FUNCTION(1, "MSDC0_RSTB")
+ ),
+ MTK_PIN(
+ 184, "GPIO184",
+ MTK_EINT_FUNCTION(0, 184),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO184"),
+ MTK_FUNCTION(1, "F2W_DATA"),
+ MTK_FUNCTION(2, "MRG_CLK"),
+ MTK_FUNCTION(3, "C2K_DM_EINT2"),
+ MTK_FUNCTION(4, "PCM0_CLK")
+ ),
+ MTK_PIN(
+ 185, "GPIO185",
+ MTK_EINT_FUNCTION(0, 185),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO185"),
+ MTK_FUNCTION(1, "F2W_CK"),
+ MTK_FUNCTION(2, "MRG_DI"),
+ MTK_FUNCTION(3, "C2K_DM_EINT3"),
+ MTK_FUNCTION(4, "PCM0_DI")
+ ),
+ MTK_PIN(
+ 186, "GPIO186",
+ MTK_EINT_FUNCTION(0, 186),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO186"),
+ MTK_FUNCTION(1, "WB_RSTB"),
+ MTK_FUNCTION(4, "URXD3"),
+ MTK_FUNCTION(5, "UTXD3")
+ ),
+ MTK_PIN(
+ 187, "GPIO187",
+ MTK_EINT_FUNCTION(0, 187),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO187"),
+ MTK_FUNCTION(1, "WB_SCLK"),
+ MTK_FUNCTION(2, "MRG_DO"),
+ MTK_FUNCTION(4, "PCM0_DO")
+ ),
+ MTK_PIN(
+ 188, "GPIO188",
+ MTK_EINT_FUNCTION(0, 188),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO188"),
+ MTK_FUNCTION(1, "WB_SDATA"),
+ MTK_FUNCTION(2, "MRG_SYNC"),
+ MTK_FUNCTION(4, "PCM0_SYNC")
+ ),
+ MTK_PIN(
+ 189, "GPIO189",
+ MTK_EINT_FUNCTION(0, 189),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO189"),
+ MTK_FUNCTION(1, "WB_SEN"),
+ MTK_FUNCTION(4, "UTXD3"),
+ MTK_FUNCTION(5, "URXD3")
+ ),
+ MTK_PIN(
+ 190, "GPIO190",
+ MTK_EINT_FUNCTION(0, 190),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO190"),
+ MTK_FUNCTION(1, "GPS_RXQN")
+ ),
+ MTK_PIN(
+ 191, "GPIO191",
+ MTK_EINT_FUNCTION(0, 191),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO191"),
+ MTK_FUNCTION(1, "GPS_RXQP")
+ ),
+ MTK_PIN(
+ 192, "GPIO192",
+ MTK_EINT_FUNCTION(0, 192),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO192"),
+ MTK_FUNCTION(1, "GPS_RXIN")
+ ),
+ MTK_PIN(
+ 193, "GPIO193",
+ MTK_EINT_FUNCTION(0, 193),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO193"),
+ MTK_FUNCTION(1, "GPS_RXIP")
+ ),
+ MTK_PIN(
+ 194, "GPIO194",
+ MTK_EINT_FUNCTION(0, 194),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO194"),
+ MTK_FUNCTION(1, "WB_RXQN")
+ ),
+ MTK_PIN(
+ 195, "GPIO195",
+ MTK_EINT_FUNCTION(0, 195),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO195"),
+ MTK_FUNCTION(1, "WB_RXQP")
+ ),
+ MTK_PIN(
+ 196, "GPIO196",
+ MTK_EINT_FUNCTION(0, 196),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO196"),
+ MTK_FUNCTION(1, "WB_RXIN")
+ ),
+ MTK_PIN(
+ 197, "GPIO197",
+ MTK_EINT_FUNCTION(0, 197),
+ DRV_GRP2,
+ MTK_FUNCTION(0, "GPIO197"),
+ MTK_FUNCTION(1, "WB_RXIP")
+ ),
+ MTK_PIN(
+ 198, "GPIO198",
+ MTK_EINT_FUNCTION(0, 198),
+ DRV_FIXED,
+ MTK_FUNCTION(0, NULL)
+ ),
+ MTK_PIN(
+ 199, "GPIO199",
+ MTK_EINT_FUNCTION(0, 199),
+ DRV_FIXED,
+ MTK_FUNCTION(0, NULL)
+ ),
+ MTK_PIN(
+ 200, "GPIO200",
+ MTK_EINT_FUNCTION(0, 200),
+ DRV_FIXED,
+ MTK_FUNCTION(0, NULL)
+ ),
+ MTK_PIN(
+ 201, "GPIO201",
+ MTK_EINT_FUNCTION(0, 201),
+ DRV_FIXED,
+ MTK_FUNCTION(0, NULL)
+ ),
+ MTK_PIN(
+ 202, "GPIO202",
+ MTK_EINT_FUNCTION(0, 202),
+ DRV_FIXED,
+ MTK_FUNCTION(0, NULL)
+ ),
+ MTK_PIN(
+ 203, "GPIO203",
+ MTK_EINT_FUNCTION(0, 203),
+ DRV_FIXED,
+ MTK_FUNCTION(0, NULL)
+ ),
+ MTK_PIN(
+ 204, "GPIO204",
+ MTK_EINT_FUNCTION(0, 204),
+ DRV_FIXED,
+ MTK_FUNCTION(0, NULL)
+ ),
+ MTK_PIN(
+ 205, "GPIO205",
+ MTK_EINT_FUNCTION(0, 205),
+ DRV_FIXED,
+ MTK_FUNCTION(0, NULL)
+ ),
+ MTK_PIN(
+ 206, "GPIO206",
+ MTK_EINT_FUNCTION(0, 206),
+ DRV_FIXED,
+ MTK_FUNCTION(0, NULL)
+ ),
+ MTK_PIN(
+ 207, "GPIO207",
+ MTK_EINT_FUNCTION(0, 207),
+ DRV_FIXED,
+ MTK_FUNCTION(0, NULL)
+ ),
+ MTK_PIN(
+ 208, "GPIO208",
+ MTK_EINT_FUNCTION(0, 208),
+ DRV_FIXED,
+ MTK_FUNCTION(0, NULL)
+ ),
+ MTK_PIN(
+ 209, "GPIO209",
+ MTK_EINT_FUNCTION(0, 209),
+ DRV_FIXED,
+ MTK_FUNCTION(0, NULL)
+ ),
+ MTK_PIN(
+ 210, "GPIO210",
+ MTK_EINT_FUNCTION(0, 210),
+ DRV_FIXED,
+ MTK_FUNCTION(0, NULL)
+ ),
+ MTK_PIN(
+ 211, "GPIO211",
+ MTK_EINT_FUNCTION(0, 211),
+ DRV_FIXED,
+ MTK_FUNCTION(0, NULL)
+ ),
+ MTK_PIN(
+ 212, "GPIO212",
+ MTK_EINT_FUNCTION(0, 212),
+ DRV_FIXED,
+ MTK_FUNCTION(0, NULL)
+ ),
+};
+
+#endif
--
2.38.0

2022-10-07 13:57:59

by Yassine Oudjana

[permalink] [raw]
Subject: [PATCH v3 02/10] dt-bindings: pinctrl: mediatek,mt6779-pinctrl: Improve description

From: Yassine Oudjana <[email protected]>

The current description mentions having to put the pin controller
node under a syscon node, but this is not the case in the current
MT6779 device tree. This is not actually needed, so replace the
current description with something more generic that describes
the use of the hardware block.

Signed-off-by: Yassine Oudjana <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
---
.../bindings/pinctrl/mediatek,mt6779-pinctrl.yaml | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)

diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml
index 8c79fcef7c52..c6290bcdded6 100644
--- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml
@@ -9,10 +9,9 @@ title: Mediatek MT6779 Pin Controller
maintainers:
- Andy Teng <[email protected]>

-description: |+
- The pin controller node should be the child of a syscon node with the
- required property:
- - compatible: "syscon"
+description:
+ The MediaTek pin controller on MT6779 is used to control pin
+ functions, pull up/down resistance and drive strength options.

properties:
compatible:
--
2.38.0

2022-10-07 14:03:17

by Yassine Oudjana

[permalink] [raw]
Subject: [PATCH v3 06/10] dt-bindings: pinctrl: mediatek,mt6779-pinctrl: Add MT6795

From: Yassine Oudjana <[email protected]>

Combine MT6795 pin controller document into MT6779 one. In the
process, replace the current interrupts property description with
the one from the MT6795 document since it makes more sense. Also
amend property descriptions and examples with more detailed
information that was available in the MT6795 document, and replace
the current pinmux node name patterns with ones from it since they
are more common across mediatek pin controller bindings.

Signed-off-by: Yassine Oudjana <[email protected]>
---
.../pinctrl/mediatek,mt6779-pinctrl.yaml | 94 ++++++--
.../pinctrl/mediatek,pinctrl-mt6795.yaml | 227 ------------------
2 files changed, 77 insertions(+), 244 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/pinctrl/mediatek,pinctrl-mt6795.yaml

diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml
index a2141eb0854e..cada3530dd0a 100644
--- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml
+++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml
@@ -8,6 +8,7 @@ title: Mediatek MT6779 Pin Controller

maintainers:
- Andy Teng <[email protected]>
+ - AngeloGioacchino Del Regno <[email protected]>
- Sean Wang <[email protected]>

description:
@@ -18,6 +19,7 @@ properties:
compatible:
enum:
- mediatek,mt6779-pinctrl
+ - mediatek,mt6795-pinctrl
- mediatek,mt6797-pinctrl

reg:
@@ -43,9 +45,10 @@ properties:
interrupt-controller: true

interrupts:
- maxItems: 1
+ minItems: 1
+ maxItems: 2
description: |
- Specifies the summary IRQ.
+ The interrupt outputs to sysirq.

"#interrupt-cells":
const: 2
@@ -81,6 +84,30 @@ allOf:
- const: iocfg_lt
- const: iocfg_tl
- const: eint
+
+ interrupts:
+ items:
+ - description: EINT interrupt
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: mediatek,mt6795-pinctrl
+ then:
+ properties:
+ reg:
+ minItems: 2
+
+ reg-names:
+ items:
+ - const: base
+ - const: eint
+
+ interrupts:
+ items:
+ - description: EINT interrupt
+ - description: EINT event_b interrupt
- if:
properties:
compatible:
@@ -111,32 +138,50 @@ allOf:
- "#interrupt-cells"

patternProperties:
- '-[0-9]*$':
+ '-pins$':
type: object
additionalProperties: false

patternProperties:
- '-pins*$':
+ '^pins':
type: object
description: |
A pinctrl node should contain at least one subnodes representing the
pinctrl groups available on the machine. Each subnode will list the
pins it needs, and how they should be configured, with regard to muxer
- configuration, pullups, drive strength, input enable/disable and input schmitt.
- $ref: "/schemas/pinctrl/pincfg-node.yaml"
+ configuration, pullups, drive strength, input enable/disable and
+ input schmitt.
+ $ref: "pinmux-node.yaml"

properties:
pinmux:
description:
- integer array, represents gpio pin number and mux setting.
- Supported pin number and mux varies for different SoCs, and are defined
- as macros in boot/dts/<soc>-pinfunc.h directly.
+ Integer array, represents gpio pin number and mux setting.
+ Supported pin number and mux varies for different SoCs, and are
+ defined as macros in dt-bindings/pinctrl/<soc>-pinfunc.h
+ directly.

bias-disable: true

- bias-pull-up: true
-
- bias-pull-down: true
+ bias-pull-up:
+ oneOf:
+ - type: boolean
+ - enum: [100, 101, 102, 103]
+ description: Pull up PUPD/R0/R1 type define value.
+ description: |
+ For normal pull up type, it is not necessary to specify R1R0
+ values; When pull up type is PUPD/R0/R1, adding R1R0 defines
+ will set different resistance values.
+
+ bias-pull-down:
+ oneOf:
+ - type: boolean
+ - enum: [100, 101, 102, 103]
+ description: Pull down PUPD/R0/R1 type define value.
+ description: |
+ For normal pull down type, it is not necessary to specify R1R0
+ values; When pull down type is PUPD/R0/R1, adding R1R0 defines
+ will set different resistance values.

input-enable: true

@@ -151,7 +196,7 @@ patternProperties:
input-schmitt-disable: true

drive-strength:
- enum: [2, 4, 8, 12, 16]
+ enum: [2, 4, 6, 8, 10, 12, 14, 16]

slew-rate:
enum: [0, 1]
@@ -218,8 +263,9 @@ examples:
#interrupt-cells = <2>;
interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>;

- mmc0_pins_default: mmc0-0 {
- cmd-dat-pins {
+ /* GPIOs 167-174, 176-178 set as multifunction MSDC0 */
+ mmc0_pins_default: mmc0-pins {
+ pins-cmd-dat {
pinmux = <PINMUX_GPIO168__FUNC_MSDC0_DAT0>,
<PINMUX_GPIO172__FUNC_MSDC0_DAT1>,
<PINMUX_GPIO169__FUNC_MSDC0_DAT2>,
@@ -232,15 +278,29 @@ examples:
input-enable;
mediatek,pull-up-adv = <1>;
};
- clk-pins {
+ pins-clk {
pinmux = <PINMUX_GPIO176__FUNC_MSDC0_CLK>;
mediatek,pull-down-adv = <2>;
};
- rst-pins {
+ pins-rst {
pinmux = <PINMUX_GPIO178__FUNC_MSDC0_RSTB>;
mediatek,pull-up-adv = <0>;
};
};
+
+ /* GPIO0 set as multifunction GPIO0 */
+ gpio-pins {
+ pins {
+ pinmux = <PINMUX_GPIO0__FUNC_GPIO0>;
+ };
+ };
+
+ /* GPIO52 set as multifunction SDA0 */
+ i2c0-pins {
+ pins {
+ pinmux = <PINMUX_GPIO52__FUNC_SDA0>;
+ };
+ };
};

mmc0 {
diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,pinctrl-mt6795.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,pinctrl-mt6795.yaml
deleted file mode 100644
index a3a3f7fb9605..000000000000
--- a/Documentation/devicetree/bindings/pinctrl/mediatek,pinctrl-mt6795.yaml
+++ /dev/null
@@ -1,227 +0,0 @@
-# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
-%YAML 1.2
----
-$id: http://devicetree.org/schemas/pinctrl/mediatek,pinctrl-mt6795.yaml#
-$schema: http://devicetree.org/meta-schemas/core.yaml#
-
-title: Mediatek MT6795 Pin Controller
-
-maintainers:
- - AngeloGioacchino Del Regno <[email protected]>
- - Sean Wang <[email protected]>
-
-description: |
- The Mediatek's Pin controller is used to control SoC pins.
-
-properties:
- compatible:
- const: mediatek,mt6795-pinctrl
-
- gpio-controller: true
-
- '#gpio-cells':
- description: |
- Number of cells in GPIO specifier. Since the generic GPIO binding is used,
- the amount of cells must be specified as 2. See the below
- mentioned gpio binding representation for description of particular cells.
- const: 2
-
- gpio-ranges:
- description: GPIO valid number range.
- maxItems: 1
-
- reg:
- description:
- Physical address base for gpio base and eint registers.
- minItems: 2
-
- reg-names:
- items:
- - const: base
- - const: eint
-
- interrupt-controller: true
-
- '#interrupt-cells':
- const: 2
-
- interrupts:
- description: The interrupt outputs to sysirq.
- minItems: 1
- items:
- - description: EINT interrupt
- - description: EINT event_b interrupt
-
-# PIN CONFIGURATION NODES
-patternProperties:
- '-pins$':
- type: object
- additionalProperties: false
- patternProperties:
- '^pins':
- type: object
- additionalProperties: false
- description: |
- A pinctrl node should contain at least one subnodes representing the
- pinctrl groups available on the machine. Each subnode will list the
- pins it needs, and how they should be configured, with regard to muxer
- configuration, pullups, drive strength, input enable/disable and
- input schmitt.
- An example of using macro:
- pincontroller {
- /* GPIO0 set as multifunction GPIO0 */
- gpio-pins {
- pins {
- pinmux = <PINMUX_GPIO0__FUNC_GPIO0>;
- }
- };
- /* GPIO45 set as multifunction SDA0 */
- i2c0-pins {
- pins {
- pinmux = <PINMUX_GPIO45__FUNC_SDA0>;
- }
- };
- };
- $ref: "pinmux-node.yaml"
-
- properties:
- pinmux:
- description: |
- Integer array, represents gpio pin number and mux setting.
- Supported pin number and mux varies for different SoCs, and are
- defined as macros in dt-bindings/pinctrl/<soc>-pinfunc.h
- directly.
-
- drive-strength:
- enum: [2, 4, 6, 8, 10, 12, 14, 16]
-
- bias-pull-down:
- oneOf:
- - type: boolean
- - enum: [100, 101, 102, 103]
- description: mt6795 pull down PUPD/R0/R1 type define value.
- description: |
- For normal pull down type, it is not necessary to specify R1R0
- values; When pull down type is PUPD/R0/R1, adding R1R0 defines
- will set different resistance values.
-
- bias-pull-up:
- oneOf:
- - type: boolean
- - enum: [100, 101, 102, 103]
- description: mt6795 pull up PUPD/R0/R1 type define value.
- description: |
- For normal pull up type, it is not necessary to specify R1R0
- values; When pull up type is PUPD/R0/R1, adding R1R0 defines
- will set different resistance values.
-
- bias-disable: true
-
- output-high: true
-
- output-low: true
-
- input-enable: true
-
- input-disable: true
-
- input-schmitt-enable: true
-
- input-schmitt-disable: true
-
- mediatek,pull-up-adv:
- description: |
- Pull up setings for 2 pull resistors, R0 and R1. User can
- configure those special pins. Valid arguments are described as below:
- 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled.
- 1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled.
- 2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled.
- 3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled.
- $ref: /schemas/types.yaml#/definitions/uint32
- enum: [0, 1, 2, 3]
-
- mediatek,pull-down-adv:
- description: |
- Pull down settings for 2 pull resistors, R0 and R1. User can
- configure those special pins. Valid arguments are described as below:
- 0: (R1, R0) = (0, 0) which means R1 disabled and R0 disabled.
- 1: (R1, R0) = (0, 1) which means R1 disabled and R0 enabled.
- 2: (R1, R0) = (1, 0) which means R1 enabled and R0 disabled.
- 3: (R1, R0) = (1, 1) which means R1 enabled and R0 enabled.
- $ref: /schemas/types.yaml#/definitions/uint32
- enum: [0, 1, 2, 3]
-
- required:
- - pinmux
-
-allOf:
- - $ref: "pinctrl.yaml#"
-
-required:
- - compatible
- - reg
- - reg-names
- - interrupts
- - interrupt-controller
- - '#interrupt-cells'
- - gpio-controller
- - '#gpio-cells'
- - gpio-ranges
-
-additionalProperties: false
-
-examples:
- - |
- #include <dt-bindings/interrupt-controller/arm-gic.h>
- #include <dt-bindings/interrupt-controller/irq.h>
- #include <dt-bindings/pinctrl/mt6795-pinfunc.h>
-
- soc {
- #address-cells = <2>;
- #size-cells = <2>;
-
- pio: pinctrl@10005000 {
- compatible = "mediatek,mt6795-pinctrl";
- reg = <0 0x10005000 0 0x1000>, <0 0x1000b000 0 0x1000>;
- reg-names = "base", "eint";
- gpio-controller;
- #gpio-cells = <2>;
- gpio-ranges = <&pio 0 0 196>;
- interrupt-controller;
- interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>;
- #interrupt-cells = <2>;
-
- i2c0-pins {
- pins-sda-scl {
- pinmux = <PINMUX_GPIO45__FUNC_SDA0>,
- <PINMUX_GPIO46__FUNC_SCL0>;
- };
- };
-
- mmc0-pins {
- pins-cmd-dat {
- pinmux = <PINMUX_GPIO154__FUNC_MSDC0_DAT0>,
- <PINMUX_GPIO155__FUNC_MSDC0_DAT1>,
- <PINMUX_GPIO156__FUNC_MSDC0_DAT2>,
- <PINMUX_GPIO157__FUNC_MSDC0_DAT3>,
- <PINMUX_GPIO158__FUNC_MSDC0_DAT4>,
- <PINMUX_GPIO159__FUNC_MSDC0_DAT5>,
- <PINMUX_GPIO160__FUNC_MSDC0_DAT6>,
- <PINMUX_GPIO161__FUNC_MSDC0_DAT7>,
- <PINMUX_GPIO162__FUNC_MSDC0_CMD>;
- input-enable;
- bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
- };
-
- pins-clk {
- pinmux = <PINMUX_GPIO163__FUNC_MSDC0_CLK>;
- bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
- };
-
- pins-rst {
- pinmux = <PINMUX_GPIO165__FUNC_MSDC0_RSTB>;
- bias-pull-up = <MTK_PUPD_SET_R1R0_10>;
- };
- };
- };
- };
--
2.38.0

Subject: Re: [PATCH v3 04/10] dt-bindings: pinctrl: mediatek,mt6779-pinctrl: Add MT6797

Il 07/10/22 14:58, Yassine Oudjana ha scritto:
> From: Yassine Oudjana <[email protected]>
>
> Combine MT6797 pin controller document into MT6779 one. reg and
> reg-names property constraints are set using conditionals.
> A conditional is also used to make interrupt-related properties
> required on the MT6779 pin controller only, since the MT6797
> controller doesn't support interrupts (or not yet, at least).
> drive-strength and slew-rate properties which weren't described
> in the MT6779 document before are brought in from the MT6797 one.
> Both pin controllers share a common driver core so they should
> both support these properties.
>
> Signed-off-by: Yassine Oudjana <[email protected]>
> Reviewed-by: Rob Herring <[email protected]>

Reviewed-by: AngeloGioacchino Del Regno <[email protected]>


Subject: Re: [PATCH v3 02/10] dt-bindings: pinctrl: mediatek,mt6779-pinctrl: Improve description

Il 07/10/22 14:58, Yassine Oudjana ha scritto:
> From: Yassine Oudjana <[email protected]>
>
> The current description mentions having to put the pin controller
> node under a syscon node, but this is not the case in the current
> MT6779 device tree. This is not actually needed, so replace the
> current description with something more generic that describes
> the use of the hardware block.
>
> Signed-off-by: Yassine Oudjana <[email protected]>
> Reviewed-by: Rob Herring <[email protected]>

Reviewed-by: AngeloGioacchino Del Regno <[email protected]>


Subject: Re: [PATCH v3 10/10] pinctrl: mediatek: Add MT6735 pinctrl driver

Il 07/10/22 14:59, Yassine Oudjana ha scritto:
> From: Yassine Oudjana <[email protected]>
>
> Add a driver for the MediaTek MT6735 SoC pin controller. This driver
> also supports the pin controller on MT6735M, which lacks 6 physical
> pins (198-203) used for MSDC2 on MT6735.
>
> Signed-off-by: Yassine Oudjana <[email protected]>

Reviewed-by: AngeloGioacchino Del Regno <[email protected]>


2022-10-10 11:33:25

by Krzysztof Kozlowski

[permalink] [raw]
Subject: Re: [PATCH v3 06/10] dt-bindings: pinctrl: mediatek,mt6779-pinctrl: Add MT6795

On 07/10/2022 08:59, Yassine Oudjana wrote:
> From: Yassine Oudjana <[email protected]>
>
> Combine MT6795 pin controller document into MT6779 one. In the
> process, replace the current interrupts property description with
> the one from the MT6795 document since it makes more sense. Also
> amend property descriptions and examples with more detailed
> information that was available in the MT6795 document, and replace
> the current pinmux node name patterns with ones from it since they
> are more common across mediatek pin controller bindings.
>
> Signed-off-by: Yassine Oudjana <[email protected]>
> ---
> .../pinctrl/mediatek,mt6779-pinctrl.yaml | 94 ++++++--
> .../pinctrl/mediatek,pinctrl-mt6795.yaml | 227 ------------------
> 2 files changed, 77 insertions(+), 244 deletions(-)
> delete mode 100644 Documentation/devicetree/bindings/pinctrl/mediatek,pinctrl-mt6795.yaml
>
> diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml
> index a2141eb0854e..cada3530dd0a 100644
> --- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml
> @@ -8,6 +8,7 @@ title: Mediatek MT6779 Pin Controller
>
> maintainers:
> - Andy Teng <[email protected]>
> + - AngeloGioacchino Del Regno <[email protected]>
> - Sean Wang <[email protected]>
>
> description:
> @@ -18,6 +19,7 @@ properties:
> compatible:
> enum:
> - mediatek,mt6779-pinctrl
> + - mediatek,mt6795-pinctrl
> - mediatek,mt6797-pinctrl
>
> reg:
> @@ -43,9 +45,10 @@ properties:
> interrupt-controller: true
>
> interrupts:
> - maxItems: 1
> + minItems: 1
> + maxItems: 2
> description: |
> - Specifies the summary IRQ.
> + The interrupt outputs to sysirq.

I am not sure if description is relevant now for all variants... what is
the sysirq? You have two interrupts so both go to one sysirq?

>
> "#interrupt-cells":
> const: 2
> @@ -81,6 +84,30 @@ allOf:
> - const: iocfg_lt
> - const: iocfg_tl
> - const: eint
> +
> + interrupts:
> + items:
> + - description: EINT interrupt
> +
> + - if:
> + properties:
> + compatible:
> + contains:
> + const: mediatek,mt6795-pinctrl
> + then:
> + properties:
> + reg:
> + minItems: 2

What's the maxItems? You declared reg and reg-names in top-level
properties as accepting anything, therefore you cannot have loose
constraints here.


> +
> + reg-names:
> + items:
> + - const: base
> + - const: eint
> +
> + interrupts:
> + items:
> + - description: EINT interrupt
> + - description: EINT event_b interrupt

Blank line

> - if:
> properties:
> compatible:
> @@ -111,32 +138,50 @@ allOf:
> - "#interrupt-cells"
>
> patternProperties:
> - '-[0-9]*$':
> + '-pins$':
> type: object
> additionalProperties: false
>
> patternProperties:
> - '-pins*$':
> + '^pins':
> type: object
> description: |
> A pinctrl node should contain at least one subnodes representing the
> pinctrl groups available on the machine. Each subnode will list the
> pins it needs, and how they should be configured, with regard to muxer
> - configuration, pullups, drive strength, input enable/disable and input schmitt.
> - $ref: "/schemas/pinctrl/pincfg-node.yaml"
> + configuration, pullups, drive strength, input enable/disable and
> + input schmitt.
> + $ref: "pinmux-node.yaml"

Drop quotes

Why this one is not pincfg-node anymore? All your properties are not
valid then? You mix here so many changes it is a bit difficult to
understand the concept.

>
> properties:
> pinmux:
> description:
> - integer array, represents gpio pin number and mux setting.
> - Supported pin number and mux varies for different SoCs, and are defined
> - as macros in boot/dts/<soc>-pinfunc.h directly.
> + Integer array, represents gpio pin number and mux setting.
> + Supported pin number and mux varies for different SoCs, and are
> + defined as macros in dt-bindings/pinctrl/<soc>-pinfunc.h
> + directly.
>
> bias-disable: true
>
> - bias-pull-up: true
> -
> - bias-pull-down: true
> + bias-pull-up:
> + oneOf:
> + - type: boolean
> + - enum: [100, 101, 102, 103]

Missing ref

> + description: Pull up PUPD/R0/R1 type define value.
> + description: |
> + For normal pull up type, it is not necessary to specify R1R0
> + values; When pull up type is PUPD/R0/R1, adding R1R0 defines
> + will set different resistance values.
> +
> + bias-pull-down:
> + oneOf:
> + - type: boolean
> + - enum: [100, 101, 102, 103]

Missing ref

> + description: Pull down PUPD/R0/R1 type define value.
> + description: |
> + For normal pull down type, it is not necessary to specify R1R0
> + values; When pull down type is PUPD/R0/R1, adding R1R0 defines
> + will set different resistance values.
>
> input-enable: true
>
> @@ -151,7 +196,7 @@ patternProperties:
> input-schmitt-disable: true
>
> drive-strength:
> - enum: [2, 4, 8, 12, 16]
> + enum: [2, 4, 6, 8, 10, 12, 14, 16]

Now you are missing ref - you do not have a type now, because you
removed pincfg-node. Split the merging of different pinctrl bindings and
reorganization.

The drive strengths are also not valid for the other variant...

>
> slew-rate:
> enum: [0, 1]
> @@ -218,8 +263,9 @@ examples:
> #interrupt-cells = <2>;
> interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>;
>
> - mmc0_pins_default: mmc0-0 {
> - cmd-dat-pins {
> + /* GPIOs 167-174, 176-178 set as multifunction MSDC0 */
> + mmc0_pins_default: mmc0-pins {
> + pins-cmd-dat {
> pinmux = <PINMUX_GPIO168__FUNC_MSDC0_DAT0>,
> <PINMUX_GPIO172__FUNC_MSDC0_DAT1>,
> <PINMUX_GPIO169__FUNC_MSDC0_DAT2>,
> @@ -232,15 +278,29 @@ examples:
> input-enable;
> mediatek,pull-up-adv = <1>;
> };
> - clk-pins {
> + pins-clk {
> pinmux = <PINMUX_GPIO176__FUNC_MSDC0_CLK>;
> mediatek,pull-down-adv = <2>;
> };
> - rst-pins {
> + pins-rst {
> pinmux = <PINMUX_GPIO178__FUNC_MSDC0_RSTB>;
> mediatek,pull-up-adv = <0>;
> };

Best regards,
Krzysztof

2022-10-10 12:18:44

by Krzysztof Kozlowski

[permalink] [raw]
Subject: Re: [PATCH v3 08/10] dt-bindings: pinctrl: mediatek,mt6779-pinctrl: Document MT6765 pin controller

On 07/10/2022 08:59, Yassine Oudjana wrote:
> From: Yassine Oudjana <[email protected]>
>
> The MT6765 pin controller has had a driver for a while, but DT
> bindings were never documented for it.
>
> Signed-off-by: Yassine Oudjana <[email protected]>
> Reviewed-by: Rob Herring <[email protected]>
> ---
> .../pinctrl/mediatek,mt6779-pinctrl.yaml | 23 +++++++++++++++++++
> 1 file changed, 23 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml
> index cada3530dd0a..71a9aae2cc8c 100644
> --- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml
> @@ -18,6 +18,7 @@ description:
> properties:
> compatible:
> enum:
> + - mediatek,mt6765-pinctrl
> - mediatek,mt6779-pinctrl
> - mediatek,mt6795-pinctrl
> - mediatek,mt6797-pinctrl
> @@ -62,6 +63,28 @@ required:
>
> allOf:
> - $ref: "pinctrl.yaml#"
> + - if:
> + properties:
> + compatible:
> + contains:
> + const: mediatek,mt6765-pinctrl
> + then:
> + properties:
> + reg:
> + minItems: 9
> + maxItems: 9
> +
> + reg-names:
> + items:
> + - const: iocfg0
> + - const: iocfg1
> + - const: iocfg2
> + - const: iocfg3
> + - const: iocfg4
> + - const: iocfg5
> + - const: iocfg6
> + - const: iocfg7
> + - const: eint

Blank line

> - if:
> properties:
> compatible:

Best regards,
Krzysztof

2022-10-10 12:21:03

by Krzysztof Kozlowski

[permalink] [raw]
Subject: Re: [PATCH v3 09/10] dt-bindings: pinctrl: mediatek,mt6779-pinctrl: Document MT6735 pin controller

On 07/10/2022 08:59, Yassine Oudjana wrote:
> From: Yassine Oudjana <[email protected]>
>
> Add bindings for the pin controller found on MediaTek MT6735 and
> MT6735M SoCs, including describing a method to manually specify
> a pin and function in the pinmux property making defining bindings
> for each pin/function combination unnecessary. The pin controllers
> on those SoCs are generally identical, with the only difference
> being the lack of MSDC2 pins (198-203) on MT6735M.
>
> Signed-off-by: Yassine Oudjana <[email protected]>
> Reviewed-by: Rob Herring <[email protected]>
> ---
> .../pinctrl/mediatek,mt6779-pinctrl.yaml | 46 ++++++++++++++++++-
> MAINTAINERS | 6 +++
> 2 files changed, 51 insertions(+), 1 deletion(-)
>
> diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml
> index 71a9aae2cc8c..7b120803a1a5 100644
> --- a/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml
> +++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml
> @@ -10,6 +10,7 @@ maintainers:
> - Andy Teng <[email protected]>
> - AngeloGioacchino Del Regno <[email protected]>
> - Sean Wang <[email protected]>
> + - Yassine Oudjana <[email protected]>
>
> description:
> The MediaTek pin controller on MT6779 is used to control pin
> @@ -18,6 +19,8 @@ description:
> properties:
> compatible:
> enum:
> + - mediatek,mt6735-pinctrl
> + - mediatek,mt6735m-pinctrl
> - mediatek,mt6765-pinctrl
> - mediatek,mt6779-pinctrl
> - mediatek,mt6795-pinctrl
> @@ -63,6 +66,33 @@ required:
>
> allOf:
> - $ref: "pinctrl.yaml#"
> + - if:
> + properties:
> + compatible:
> + contains:
> + enum:
> + - mediatek,mt6735-pinctrl
> + - mediatek,mt6735m-pinctrl
> + then:
> + properties:
> + reg:
> + minItems: 8
> + maxItems: 8
> +
> + reg-names:
> + items:
> + - const: gpio
> + - const: iocfg0
> + - const: iocfg1
> + - const: iocfg2
> + - const: iocfg3
> + - const: iocfg4
> + - const: iocfg5
> + - const: eint
> +
> + interrupts:
> + items:
> + - description: EINT interrupt

Blank line

Best regards,
Krzysztof

2022-10-17 09:59:29

by Linus Walleij

[permalink] [raw]
Subject: Re: [PATCH v3 00/10] MediaTek pinctrl DT binding cleanup and MT6735 pinctrl support

On Fri, Oct 7, 2022 at 2:59 PM Yassine Oudjana
<[email protected]> wrote:

> From: Yassine Oudjana <[email protected]>
>
> This series adds a driver for the pin controller found on the MediaTek MT6735
> and MT6735M SoCs. The two differ in the last 6 physical pins, which are used
> for MSDC2 on MT6735 but don't exist on MT6735M (since MSDC2 doesn't exist on it
> to begin with). In preparation to document DT bindings for this pin controller,
> the existing documents for MT67xx SoCs are combined into one in order to
> eliminate duplicate property definitions and standardize pin configuration node
> names. Necessary cleanup is done along the way.
>
> Changes since v2:

v3 is already looking very good!

Please fix up the remaining comments, then rebase on kernel
v6.1-rc1 and resend, I think we can get the final reviews and apply
it after that.

Yours,
Linus Walleij

2022-10-20 12:12:25

by Yassine Oudjana

[permalink] [raw]
Subject: Re: [PATCH v3 06/10] dt-bindings: pinctrl: mediatek,mt6779-pinctrl: Add MT6795


On Mon, Oct 10 2022 at 07:24:59 -04:00:00, Krzysztof Kozlowski
<[email protected]> wrote:
> On 07/10/2022 08:59, Yassine Oudjana wrote:
>> From: Yassine Oudjana <[email protected]>
>>
>> Combine MT6795 pin controller document into MT6779 one. In the
>> process, replace the current interrupts property description with
>> the one from the MT6795 document since it makes more sense. Also
>> amend property descriptions and examples with more detailed
>> information that was available in the MT6795 document, and replace
>> the current pinmux node name patterns with ones from it since they
>> are more common across mediatek pin controller bindings.
>>
>> Signed-off-by: Yassine Oudjana <[email protected]>
>> ---
>> .../pinctrl/mediatek,mt6779-pinctrl.yaml | 94 ++++++--
>> .../pinctrl/mediatek,pinctrl-mt6795.yaml | 227
>> ------------------
>> 2 files changed, 77 insertions(+), 244 deletions(-)
>> delete mode 100644
>> Documentation/devicetree/bindings/pinctrl/mediatek,pinctrl-mt6795.yaml
>>
>> diff --git
>> a/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml
>> b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml
>> index a2141eb0854e..cada3530dd0a 100644
>> ---
>> a/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml
>> +++
>> b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml
>> @@ -8,6 +8,7 @@ title: Mediatek MT6779 Pin Controller
>>
>> maintainers:
>> - Andy Teng <[email protected]>
>> + - AngeloGioacchino Del Regno
>> <[email protected]>
>> - Sean Wang <[email protected]>
>>
>> description:
>> @@ -18,6 +19,7 @@ properties:
>> compatible:
>> enum:
>> - mediatek,mt6779-pinctrl
>> + - mediatek,mt6795-pinctrl
>> - mediatek,mt6797-pinctrl
>>
>> reg:
>> @@ -43,9 +45,10 @@ properties:
>> interrupt-controller: true
>>
>> interrupts:
>> - maxItems: 1
>> + minItems: 1
>> + maxItems: 2
>> description: |
>> - Specifies the summary IRQ.
>> + The interrupt outputs to sysirq.
>
> I am not sure if description is relevant now for all variants... what
> is
> the sysirq? You have two interrupts so both go to one sysirq?

It's the system interrupt controller and it has several inputs. Both
interrupts go to it.

>
>>
>> "#interrupt-cells":
>> const: 2
>> @@ -81,6 +84,30 @@ allOf:
>> - const: iocfg_lt
>> - const: iocfg_tl
>> - const: eint
>> +
>> + interrupts:
>> + items:
>> + - description: EINT interrupt
>> +
>> + - if:
>> + properties:
>> + compatible:
>> + contains:
>> + const: mediatek,mt6795-pinctrl
>> + then:
>> + properties:
>> + reg:
>> + minItems: 2
>
> What's the maxItems? You declared reg and reg-names in top-level
> properties as accepting anything, therefore you cannot have loose
> constraints here.

That was an oversight. I'll fix it.
>
>> +
>> + reg-names:
>> + items:
>> + - const: base
>> + - const: eint
>> +
>> + interrupts:
>> + items:
>> + - description: EINT interrupt
>> + - description: EINT event_b interrupt
>
> Blank line
>
>> - if:
>> properties:
>> compatible:
>> @@ -111,32 +138,50 @@ allOf:
>> - "#interrupt-cells"
>>
>> patternProperties:
>> - '-[0-9]*$':
>> + '-pins$':
>> type: object
>> additionalProperties: false
>>
>> patternProperties:
>> - '-pins*$':
>> + '^pins':
>> type: object
>> description: |
>> A pinctrl node should contain at least one subnodes
>> representing the
>> pinctrl groups available on the machine. Each subnode
>> will list the
>> pins it needs, and how they should be configured, with
>> regard to muxer
>> - configuration, pullups, drive strength, input
>> enable/disable and input schmitt.
>> - $ref: "/schemas/pinctrl/pincfg-node.yaml"
>> + configuration, pullups, drive strength, input
>> enable/disable and
>> + input schmitt.
>> + $ref: "pinmux-node.yaml"
>
> Drop quotes
>
> Why this one is not pincfg-node anymore? All your properties are not
> valid then? You mix here so many changes it is a bit difficult to
> understand the concept.

Seems like I didn't pay enough attention to that. This node actually
takes both pinmux-node (pinmux specifically) and pincfg-node
properties, so would it make sense to add ref for both?

>
>>
>> properties:
>> pinmux:
>> description:
>> - integer array, represents gpio pin number and mux
>> setting.
>> - Supported pin number and mux varies for different
>> SoCs, and are defined
>> - as macros in boot/dts/<soc>-pinfunc.h directly.
>> + Integer array, represents gpio pin number and mux
>> setting.
>> + Supported pin number and mux varies for different
>> SoCs, and are
>> + defined as macros in
>> dt-bindings/pinctrl/<soc>-pinfunc.h
>> + directly.
>>
>> bias-disable: true
>>
>> - bias-pull-up: true
>> -
>> - bias-pull-down: true
>> + bias-pull-up:
>> + oneOf:
>> + - type: boolean
>> + - enum: [100, 101, 102, 103]
>
> Missing ref
>
>> + description: Pull up PUPD/R0/R1 type define value.
>> + description: |
>> + For normal pull up type, it is not necessary to
>> specify R1R0
>> + values; When pull up type is PUPD/R0/R1, adding
>> R1R0 defines
>> + will set different resistance values.
>> +
>> + bias-pull-down:
>> + oneOf:
>> + - type: boolean
>> + - enum: [100, 101, 102, 103]
>
> Missing ref
>
>> + description: Pull down PUPD/R0/R1 type define
>> value.
>> + description: |
>> + For normal pull down type, it is not necessary to
>> specify R1R0
>> + values; When pull down type is PUPD/R0/R1, adding
>> R1R0 defines
>> + will set different resistance values.
>>
>> input-enable: true
>>
>> @@ -151,7 +196,7 @@ patternProperties:
>> input-schmitt-disable: true
>>
>> drive-strength:
>> - enum: [2, 4, 8, 12, 16]
>> + enum: [2, 4, 6, 8, 10, 12, 14, 16]
>
> Now you are missing ref - you do not have a type now, because you
> removed pincfg-node. Split the merging of different pinctrl bindings
> and
> reorganization.

Will do.

>
> The drive strengths are also not valid for the other variant...

Actually the supported drive strengths vary between pins of a single
variant, so technically they have never been described completely
accurately. The old drive strenghs are a superset of strengths
supported by pins on the MT6779 pin controller, and this change expands
the superset with values supported by some pins in MT6795. Would it be
better to move this to the conditionals to have it defined per variant?

>>
>> slew-rate:
>> enum: [0, 1]
>> @@ -218,8 +263,9 @@ examples:
>> #interrupt-cells = <2>;
>> interrupts = <GIC_SPI 204 IRQ_TYPE_LEVEL_HIGH>;
>>
>> - mmc0_pins_default: mmc0-0 {
>> - cmd-dat-pins {
>> + /* GPIOs 167-174, 176-178 set as multifunction MSDC0 */
>> + mmc0_pins_default: mmc0-pins {
>> + pins-cmd-dat {
>> pinmux = <PINMUX_GPIO168__FUNC_MSDC0_DAT0>,
>> <PINMUX_GPIO172__FUNC_MSDC0_DAT1>,
>> <PINMUX_GPIO169__FUNC_MSDC0_DAT2>,
>> @@ -232,15 +278,29 @@ examples:
>> input-enable;
>> mediatek,pull-up-adv = <1>;
>> };
>> - clk-pins {
>> + pins-clk {
>> pinmux = <PINMUX_GPIO176__FUNC_MSDC0_CLK>;
>> mediatek,pull-down-adv = <2>;
>> };
>> - rst-pins {
>> + pins-rst {
>> pinmux = <PINMUX_GPIO178__FUNC_MSDC0_RSTB>;
>> mediatek,pull-up-adv = <0>;
>> };
>
> Best regards,
> Krzysztof
>


2022-10-20 12:36:56

by Krzysztof Kozlowski

[permalink] [raw]
Subject: Re: [PATCH v3 06/10] dt-bindings: pinctrl: mediatek,mt6779-pinctrl: Add MT6795

On 20/10/2022 07:36, Yassine Oudjana wrote:
>
> On Mon, Oct 10 2022 at 07:24:59 -04:00:00, Krzysztof Kozlowski
> <[email protected]> wrote:
>> On 07/10/2022 08:59, Yassine Oudjana wrote:
>>> From: Yassine Oudjana <[email protected]>
>>>
>>> Combine MT6795 pin controller document into MT6779 one. In the
>>> process, replace the current interrupts property description with
>>> the one from the MT6795 document since it makes more sense. Also
>>> amend property descriptions and examples with more detailed
>>> information that was available in the MT6795 document, and replace
>>> the current pinmux node name patterns with ones from it since they
>>> are more common across mediatek pin controller bindings.
>>>
>>> Signed-off-by: Yassine Oudjana <[email protected]>
>>> ---
>>> .../pinctrl/mediatek,mt6779-pinctrl.yaml | 94 ++++++--
>>> .../pinctrl/mediatek,pinctrl-mt6795.yaml | 227
>>> ------------------
>>> 2 files changed, 77 insertions(+), 244 deletions(-)
>>> delete mode 100644
>>> Documentation/devicetree/bindings/pinctrl/mediatek,pinctrl-mt6795.yaml
>>>
>>> diff --git
>>> a/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml
>>> b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml
>>> index a2141eb0854e..cada3530dd0a 100644
>>> ---
>>> a/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml
>>> +++
>>> b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml
>>> @@ -8,6 +8,7 @@ title: Mediatek MT6779 Pin Controller
>>>
>>> maintainers:
>>> - Andy Teng <[email protected]>
>>> + - AngeloGioacchino Del Regno
>>> <[email protected]>
>>> - Sean Wang <[email protected]>
>>>
>>> description:
>>> @@ -18,6 +19,7 @@ properties:
>>> compatible:
>>> enum:
>>> - mediatek,mt6779-pinctrl
>>> + - mediatek,mt6795-pinctrl
>>> - mediatek,mt6797-pinctrl
>>>
>>> reg:
>>> @@ -43,9 +45,10 @@ properties:
>>> interrupt-controller: true
>>>
>>> interrupts:
>>> - maxItems: 1
>>> + minItems: 1
>>> + maxItems: 2
>>> description: |
>>> - Specifies the summary IRQ.
>>> + The interrupt outputs to sysirq.
>>
>> I am not sure if description is relevant now for all variants... what
>> is
>> the sysirq? You have two interrupts so both go to one sysirq?
>
> It's the system interrupt controller and it has several inputs. Both
> interrupts go to it.

Then the naming is confusing because "sysirq" sounds like "system
interrupt".

>
>>
>>>
>>> "#interrupt-cells":
>>> const: 2
>>> @@ -81,6 +84,30 @@ allOf:
>>> - const: iocfg_lt
>>> - const: iocfg_tl
>>> - const: eint
>>> +
>>> + interrupts:
>>> + items:
>>> + - description: EINT interrupt
>>> +
>>> + - if:
>>> + properties:
>>> + compatible:
>>> + contains:
>>> + const: mediatek,mt6795-pinctrl
>>> + then:
>>> + properties:
>>> + reg:
>>> + minItems: 2
>>
>> What's the maxItems? You declared reg and reg-names in top-level
>> properties as accepting anything, therefore you cannot have loose
>> constraints here.
>
> That was an oversight. I'll fix it.
>>
>>> +
>>> + reg-names:
>>> + items:
>>> + - const: base
>>> + - const: eint
>>> +
>>> + interrupts:
>>> + items:
>>> + - description: EINT interrupt
>>> + - description: EINT event_b interrupt
>>
>> Blank line
>>
>>> - if:
>>> properties:
>>> compatible:
>>> @@ -111,32 +138,50 @@ allOf:
>>> - "#interrupt-cells"
>>>
>>> patternProperties:
>>> - '-[0-9]*$':
>>> + '-pins$':
>>> type: object
>>> additionalProperties: false
>>>
>>> patternProperties:
>>> - '-pins*$':
>>> + '^pins':
>>> type: object
>>> description: |
>>> A pinctrl node should contain at least one subnodes
>>> representing the
>>> pinctrl groups available on the machine. Each subnode
>>> will list the
>>> pins it needs, and how they should be configured, with
>>> regard to muxer
>>> - configuration, pullups, drive strength, input
>>> enable/disable and input schmitt.
>>> - $ref: "/schemas/pinctrl/pincfg-node.yaml"
>>> + configuration, pullups, drive strength, input
>>> enable/disable and
>>> + input schmitt.
>>> + $ref: "pinmux-node.yaml"
>>
>> Drop quotes
>>
>> Why this one is not pincfg-node anymore? All your properties are not
>> valid then? You mix here so many changes it is a bit difficult to
>> understand the concept.
>
> Seems like I didn't pay enough attention to that. This node actually
> takes both pinmux-node (pinmux specifically) and pincfg-node
> properties, so would it make sense to add ref for both?

Yes, and make changes in organized way, easier to read...

>
>>
>>>
>>> properties:
>>> pinmux:
>>> description:
>>> - integer array, represents gpio pin number and mux
>>> setting.
>>> - Supported pin number and mux varies for different
>>> SoCs, and are defined
>>> - as macros in boot/dts/<soc>-pinfunc.h directly.
>>> + Integer array, represents gpio pin number and mux
>>> setting.
>>> + Supported pin number and mux varies for different
>>> SoCs, and are
>>> + defined as macros in
>>> dt-bindings/pinctrl/<soc>-pinfunc.h
>>> + directly.
>>>
>>> bias-disable: true
>>>
>>> - bias-pull-up: true
>>> -
>>> - bias-pull-down: true
>>> + bias-pull-up:
>>> + oneOf:
>>> + - type: boolean
>>> + - enum: [100, 101, 102, 103]
>>
>> Missing ref
>>
>>> + description: Pull up PUPD/R0/R1 type define value.
>>> + description: |
>>> + For normal pull up type, it is not necessary to
>>> specify R1R0
>>> + values; When pull up type is PUPD/R0/R1, adding
>>> R1R0 defines
>>> + will set different resistance values.
>>> +
>>> + bias-pull-down:
>>> + oneOf:
>>> + - type: boolean
>>> + - enum: [100, 101, 102, 103]
>>
>> Missing ref
>>
>>> + description: Pull down PUPD/R0/R1 type define
>>> value.
>>> + description: |
>>> + For normal pull down type, it is not necessary to
>>> specify R1R0
>>> + values; When pull down type is PUPD/R0/R1, adding
>>> R1R0 defines
>>> + will set different resistance values.
>>>
>>> input-enable: true
>>>
>>> @@ -151,7 +196,7 @@ patternProperties:
>>> input-schmitt-disable: true
>>>
>>> drive-strength:
>>> - enum: [2, 4, 8, 12, 16]
>>> + enum: [2, 4, 6, 8, 10, 12, 14, 16]
>>
>> Now you are missing ref - you do not have a type now, because you
>> removed pincfg-node. Split the merging of different pinctrl bindings
>> and
>> reorganization.
>
> Will do.
>
>>
>> The drive strengths are also not valid for the other variant...
>
> Actually the supported drive strengths vary between pins of a single
> variant, so technically they have never been described completely
> accurately. The old drive strenghs are a superset of strengths
> supported by pins on the MT6779 pin controller, and this change expands
> the superset with values supported by some pins in MT6795. Would it be
> better to move this to the conditionals to have it defined per variant?

If they vary, then yes.


Best regards,
Krzysztof

Subject: Re: [PATCH v3 06/10] dt-bindings: pinctrl: mediatek,mt6779-pinctrl: Add MT6795

Il 20/10/22 14:21, Krzysztof Kozlowski ha scritto:
> On 20/10/2022 07:36, Yassine Oudjana wrote:
>>
>> On Mon, Oct 10 2022 at 07:24:59 -04:00:00, Krzysztof Kozlowski
>> <[email protected]> wrote:
>>> On 07/10/2022 08:59, Yassine Oudjana wrote:
>>>> From: Yassine Oudjana <[email protected]>
>>>>
>>>> Combine MT6795 pin controller document into MT6779 one. In the
>>>> process, replace the current interrupts property description with
>>>> the one from the MT6795 document since it makes more sense. Also
>>>> amend property descriptions and examples with more detailed
>>>> information that was available in the MT6795 document, and replace
>>>> the current pinmux node name patterns with ones from it since they
>>>> are more common across mediatek pin controller bindings.
>>>>
>>>> Signed-off-by: Yassine Oudjana <[email protected]>
>>>> ---
>>>> .../pinctrl/mediatek,mt6779-pinctrl.yaml | 94 ++++++--
>>>> .../pinctrl/mediatek,pinctrl-mt6795.yaml | 227
>>>> ------------------
>>>> 2 files changed, 77 insertions(+), 244 deletions(-)
>>>> delete mode 100644
>>>> Documentation/devicetree/bindings/pinctrl/mediatek,pinctrl-mt6795.yaml
>>>>
>>>> diff --git
>>>> a/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml
>>>> b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml
>>>> index a2141eb0854e..cada3530dd0a 100644
>>>> ---
>>>> a/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml
>>>> +++
>>>> b/Documentation/devicetree/bindings/pinctrl/mediatek,mt6779-pinctrl.yaml
>>>> @@ -8,6 +8,7 @@ title: Mediatek MT6779 Pin Controller
>>>>
>>>> maintainers:
>>>> - Andy Teng <[email protected]>
>>>> + - AngeloGioacchino Del Regno
>>>> <[email protected]>
>>>> - Sean Wang <[email protected]>
>>>>
>>>> description:
>>>> @@ -18,6 +19,7 @@ properties:
>>>> compatible:
>>>> enum:
>>>> - mediatek,mt6779-pinctrl
>>>> + - mediatek,mt6795-pinctrl
>>>> - mediatek,mt6797-pinctrl
>>>>
>>>> reg:
>>>> @@ -43,9 +45,10 @@ properties:
>>>> interrupt-controller: true
>>>>
>>>> interrupts:
>>>> - maxItems: 1
>>>> + minItems: 1
>>>> + maxItems: 2
>>>> description: |
>>>> - Specifies the summary IRQ.
>>>> + The interrupt outputs to sysirq.
>>>
>>> I am not sure if description is relevant now for all variants... what
>>> is
>>> the sysirq? You have two interrupts so both go to one sysirq?
>>
>> It's the system interrupt controller and it has several inputs. Both
>> interrupts go to it.
>
> Then the naming is confusing because "sysirq" sounds like "system
> interrupt".
>

Yassine: "Interrupt outputs to the system interrupt controller (sysirq)"

That will surely clear up the confusion... :-)

Cheers,
Angelo