This adds a binding for a GPIO multiplexer driver based on latches
connected to other GPIOs.
Signed-off-by: Sascha Hauer <[email protected]>
Reviewed-by: Rob Herring <[email protected]>
---
Notes:
Changes since v3:
- Introduce delays between GPIO toggles as suggested by Serge Semin
Changes since v1:
- Add license to binding file
.../devicetree/bindings/gpio/gpio-latch.yaml | 94 +++++++++++++++++++
1 file changed, 94 insertions(+)
create mode 100644 Documentation/devicetree/bindings/gpio/gpio-latch.yaml
diff --git a/Documentation/devicetree/bindings/gpio/gpio-latch.yaml b/Documentation/devicetree/bindings/gpio/gpio-latch.yaml
new file mode 100644
index 0000000000000..1ed82a2cebdaa
--- /dev/null
+++ b/Documentation/devicetree/bindings/gpio/gpio-latch.yaml
@@ -0,0 +1,94 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/gpio/gpio-latch.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: GPIO latch controller
+
+maintainers:
+ - Sascha Hauer <[email protected]>
+
+description: |
+ This binding describes a GPIO multiplexer based on latches connected to
+ other GPIOs, like this:
+
+ CLK0 ----------------------. ,--------.
+ CLK1 -------------------. `--------|> #0 |
+ | | |
+ OUT0 ----------------+--|-----------|D0 Q0|-----|<
+ OUT1 --------------+-|--|-----------|D1 Q1|-----|<
+ OUT2 ------------+-|-|--|-----------|D2 Q2|-----|<
+ OUT3 ----------+-|-|-|--|-----------|D3 Q3|-----|<
+ OUT4 --------+-|-|-|-|--|-----------|D4 Q4|-----|<
+ OUT5 ------+-|-|-|-|-|--|-----------|D5 Q5|-----|<
+ OUT6 ----+-|-|-|-|-|-|--|-----------|D6 Q6|-----|<
+ OUT7 --+-|-|-|-|-|-|-|--|-----------|D7 Q7|-----|<
+ | | | | | | | | | `--------'
+ | | | | | | | | |
+ | | | | | | | | | ,--------.
+ | | | | | | | | `-----------|> #1 |
+ | | | | | | | | | |
+ | | | | | | | `--------------|D0 Q0|-----|<
+ | | | | | | `----------------|D1 Q1|-----|<
+ | | | | | `------------------|D2 Q2|-----|<
+ | | | | `--------------------|D3 Q3|-----|<
+ | | | `----------------------|D4 Q4|-----|<
+ | | `------------------------|D5 Q5|-----|<
+ | `--------------------------|D6 Q6|-----|<
+ `----------------------------|D7 Q7|-----|<
+ `--------'
+
+ The number of clk-gpios and latched-gpios is not fixed. The actual number
+ of number of latches and the number of inputs per latch is derived from
+ the number of GPIOs given in the corresponding device tree properties.
+
+properties:
+ compatible:
+ const: gpio-latch
+ "#gpio-cells":
+ const: 2
+
+ clk-gpios:
+ description: Array of GPIOs to be used to clock a latch
+
+ latched-gpios:
+ description: Array of GPIOs to be used as inputs per latch
+
+ setup-duration-ns:
+ description: Delay in nanoseconds to wait after the latch inputs have been
+ set up
+
+ clock-duration-ns:
+ description: Delay in nanoseconds to wait between clock output changes
+
+ gpio-controller: true
+
+ gpio-line-names: true
+
+required:
+ - compatible
+ - "#gpio-cells"
+ - gpio-controller
+ - clk-gpios
+ - latched-gpios
+
+additionalProperties: false
+
+examples:
+ - |
+ gpio-latch {
+ #gpio-cells = <2>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_di_do_leds>;
+ compatible = "gpio-latch";
+ gpio-controller;
+ setup-duration-ns = <100>;
+ clock-duration-ns = <100>;
+
+ clk-gpios = <&gpio3 7 0>, <&gpio3 8 0>;
+ latched-gpios = <&gpio3 21 0>, <&gpio3 22 0>,
+ <&gpio3 23 0>, <&gpio3 24 0>,
+ <&gpio3 25 0>, <&gpio3 26 0>,
+ <&gpio3 27 0>, <&gpio3 28 0>;
+ };
--
2.30.2
On Fri, Oct 07, 2022 at 01:46:47PM +0200, Sascha Hauer wrote:
> This adds a binding for a GPIO multiplexer driver based on latches
> connected to other GPIOs.
>
> Signed-off-by: Sascha Hauer <[email protected]>
> Reviewed-by: Rob Herring <[email protected]>
Reviewed-by: Serge Semin <[email protected]>
Just a note. In accordance with [1] the DT-bindings patches should come
in the series before the code implementing the bindings.
[1] Documentation/devicetree/bindings/submitting-patches.rst, unit I.5).
-Sergey
> ---
>
> Notes:
> Changes since v3:
> - Introduce delays between GPIO toggles as suggested by Serge Semin
>
> Changes since v1:
> - Add license to binding file
>
> .../devicetree/bindings/gpio/gpio-latch.yaml | 94 +++++++++++++++++++
> 1 file changed, 94 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/gpio/gpio-latch.yaml
>
> diff --git a/Documentation/devicetree/bindings/gpio/gpio-latch.yaml b/Documentation/devicetree/bindings/gpio/gpio-latch.yaml
> new file mode 100644
> index 0000000000000..1ed82a2cebdaa
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/gpio/gpio-latch.yaml
> @@ -0,0 +1,94 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/gpio/gpio-latch.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: GPIO latch controller
> +
> +maintainers:
> + - Sascha Hauer <[email protected]>
> +
> +description: |
> + This binding describes a GPIO multiplexer based on latches connected to
> + other GPIOs, like this:
> +
> + CLK0 ----------------------. ,--------.
> + CLK1 -------------------. `--------|> #0 |
> + | | |
> + OUT0 ----------------+--|-----------|D0 Q0|-----|<
> + OUT1 --------------+-|--|-----------|D1 Q1|-----|<
> + OUT2 ------------+-|-|--|-----------|D2 Q2|-----|<
> + OUT3 ----------+-|-|-|--|-----------|D3 Q3|-----|<
> + OUT4 --------+-|-|-|-|--|-----------|D4 Q4|-----|<
> + OUT5 ------+-|-|-|-|-|--|-----------|D5 Q5|-----|<
> + OUT6 ----+-|-|-|-|-|-|--|-----------|D6 Q6|-----|<
> + OUT7 --+-|-|-|-|-|-|-|--|-----------|D7 Q7|-----|<
> + | | | | | | | | | `--------'
> + | | | | | | | | |
> + | | | | | | | | | ,--------.
> + | | | | | | | | `-----------|> #1 |
> + | | | | | | | | | |
> + | | | | | | | `--------------|D0 Q0|-----|<
> + | | | | | | `----------------|D1 Q1|-----|<
> + | | | | | `------------------|D2 Q2|-----|<
> + | | | | `--------------------|D3 Q3|-----|<
> + | | | `----------------------|D4 Q4|-----|<
> + | | `------------------------|D5 Q5|-----|<
> + | `--------------------------|D6 Q6|-----|<
> + `----------------------------|D7 Q7|-----|<
> + `--------'
> +
> + The number of clk-gpios and latched-gpios is not fixed. The actual number
> + of number of latches and the number of inputs per latch is derived from
> + the number of GPIOs given in the corresponding device tree properties.
> +
> +properties:
> + compatible:
> + const: gpio-latch
> + "#gpio-cells":
> + const: 2
> +
> + clk-gpios:
> + description: Array of GPIOs to be used to clock a latch
> +
> + latched-gpios:
> + description: Array of GPIOs to be used as inputs per latch
> +
> + setup-duration-ns:
> + description: Delay in nanoseconds to wait after the latch inputs have been
> + set up
> +
> + clock-duration-ns:
> + description: Delay in nanoseconds to wait between clock output changes
> +
> + gpio-controller: true
> +
> + gpio-line-names: true
> +
> +required:
> + - compatible
> + - "#gpio-cells"
> + - gpio-controller
> + - clk-gpios
> + - latched-gpios
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + gpio-latch {
> + #gpio-cells = <2>;
> + pinctrl-names = "default";
> + pinctrl-0 = <&pinctrl_di_do_leds>;
> + compatible = "gpio-latch";
> + gpio-controller;
> + setup-duration-ns = <100>;
> + clock-duration-ns = <100>;
> +
> + clk-gpios = <&gpio3 7 0>, <&gpio3 8 0>;
> + latched-gpios = <&gpio3 21 0>, <&gpio3 22 0>,
> + <&gpio3 23 0>, <&gpio3 24 0>,
> + <&gpio3 25 0>, <&gpio3 26 0>,
> + <&gpio3 27 0>, <&gpio3 28 0>;
> + };
> --
> 2.30.2
>
On Fri, Oct 7, 2022 at 1:47 PM Sascha Hauer <[email protected]> wrote:
> This adds a binding for a GPIO multiplexer driver based on latches
> connected to other GPIOs.
>
> Signed-off-by: Sascha Hauer <[email protected]>
> Reviewed-by: Rob Herring <[email protected]>
Reviewed-by: Linus Walleij <[email protected]>
Yours,
Linus Walleij