2022-10-08 19:55:26

by Ian Pilcher

[permalink] [raw]
Subject: [RESEND PATCH v12 2/2] leds: trigger: Add block device LED trigger

Add "blkdev" LED trigger to blink LEDs in response to block device
activity.

Add LEDS_TRIGGER_BLKDEV (tristate) config option to control building of
the trigger.

Signed-off-by: Ian Pilcher <[email protected]>
Tested-by: Tor Vic <[email protected]>
---
drivers/leds/trigger/Kconfig | 9 +
drivers/leds/trigger/Makefile | 1 +
drivers/leds/trigger/ledtrig-blkdev.c | 1220 +++++++++++++++++++++++++
3 files changed, 1230 insertions(+)
create mode 100644 drivers/leds/trigger/ledtrig-blkdev.c

diff --git a/drivers/leds/trigger/Kconfig b/drivers/leds/trigger/Kconfig
index dc6816d36d06..bda249068182 100644
--- a/drivers/leds/trigger/Kconfig
+++ b/drivers/leds/trigger/Kconfig
@@ -154,4 +154,13 @@ config LEDS_TRIGGER_TTY

When build as a module this driver will be called ledtrig-tty.

+config LEDS_TRIGGER_BLKDEV
+ tristate "LED Trigger for block devices"
+ depends on BLOCK
+ help
+ The blkdev LED trigger allows LEDs to be controlled by block device
+ activity (reads and writes).
+
+ See Documentation/leds/ledtrig-blkdev.rst.
+
endif # LEDS_TRIGGERS
diff --git a/drivers/leds/trigger/Makefile b/drivers/leds/trigger/Makefile
index 25c4db97cdd4..d53bab5d93f1 100644
--- a/drivers/leds/trigger/Makefile
+++ b/drivers/leds/trigger/Makefile
@@ -16,3 +16,4 @@ obj-$(CONFIG_LEDS_TRIGGER_NETDEV) += ledtrig-netdev.o
obj-$(CONFIG_LEDS_TRIGGER_PATTERN) += ledtrig-pattern.o
obj-$(CONFIG_LEDS_TRIGGER_AUDIO) += ledtrig-audio.o
obj-$(CONFIG_LEDS_TRIGGER_TTY) += ledtrig-tty.o
+obj-$(CONFIG_LEDS_TRIGGER_BLKDEV) += ledtrig-blkdev.o
diff --git a/drivers/leds/trigger/ledtrig-blkdev.c b/drivers/leds/trigger/ledtrig-blkdev.c
new file mode 100644
index 000000000000..8614e308fadc
--- /dev/null
+++ b/drivers/leds/trigger/ledtrig-blkdev.c
@@ -0,0 +1,1220 @@
+// SPDX-License-Identifier: GPL-2.0-only
+
+/*
+ * Block device LED trigger
+ *
+ * Copyright 2021-2022 Ian Pilcher <[email protected]>
+ */
+
+#include <linux/blkdev.h>
+#include <linux/leds.h>
+#include <linux/module.h>
+#include <linux/part_stat.h>
+#include <linux/xarray.h>
+
+/**
+ * DOC: Overview
+ *
+ * The ``blkdev`` LED trigger works by periodically checking the activity
+ * counters of block devices that have been linked to one or more LEDs and
+ * blinking those LED(s) if the correct type of activity has occurred. The
+ * periodic check is scheduled with the Linux kernel's deferred work facility.
+ *
+ * Trigger-specific data about block devices and LEDs is stored in two data
+ * structures --- &struct blkdev_trig_bdev (a "BTB") and &struct blkdev_trig_led
+ * (a "BTL"). Each structure contains a &struct xarray that holds links to any
+ * linked devices of the other type. I.e. &blkdev_trig_bdev.linked_btls
+ * contains links to all BTLs whose LEDs have been linked to the BTB's block
+ * device, and &blkdev_trig_led.linked_btbs contains links to all BTBs whose
+ * block devices have been linked to the BTL's LED. Thus, a block device can
+ * be linked to more than one LED, and an LED can be linked to more than one
+ * block device.
+ */
+
+/* Default, minimum & maximum blink duration (milliseconds) */
+#define BLKDEV_TRIG_BLINK_DEF 75
+#define BLKDEV_TRIG_BLINK_MIN 10
+#define BLKDEV_TRIG_BLINK_MAX 86400000 /* 24 hours */
+
+/* Default, minimum & maximum activity check interval (milliseconds) */
+#define BLKDEV_TRIG_CHECK_DEF 100
+#define BLKDEV_TRIG_CHECK_MIN 25
+#define BLKDEV_TRIG_CHECK_MAX 86400000 /* 24 hours */
+
+/*
+ * If blkdev_trig_check() can't lock the mutex, how long to wait before trying
+ * again (milliseconds)
+ */
+#define BLKDEV_TRIG_CHECK_RETRY 5
+
+/* Mode argument for calls to blkdev_get_by_path() and blkdev_put() */
+#define BLKDEV_TRIG_FMODE 0
+
+/**
+ * struct blkdev_trig_bdev - Trigger-specific data about a block device.
+ * @last_checked: Time (in jiffies) at which the trigger last checked this
+ * block device for activity.
+ * @last_activity: Time (in jiffies) at which the trigger last detected
+ * activity of each type.
+ * @ios: Activity counter values for each type, corresponding to
+ * the timestamps in &last_activity.
+ * @index: &xarray index, so the BTB can be included in one or more
+ * &blkdev_trig_led.linked_btbs.
+ * @bdev: The block device.
+ * @linked_btls: The BTLs that represent the LEDs linked to the BTB's
+ * block device.
+ *
+ * Every block device linked to at least one LED gets a "BTB." A BTB is created
+ * when a block device that is not currently linked to any LEDs is linked to an
+ * LED.
+ *
+ * A BTB is freed when one of the following occurs:
+ *
+ * * The number of LEDs linked to the block device becomes zero, because it has
+ * been unlinked from its last LED using the trigger's &sysfs interface.
+ *
+ * * The number of LEDs linked to the block device becomes zero, because the
+ * last LED to which it was linked has been disassociated from the trigger
+ * (which happens automatically if the LED device is removed from the system).
+ *
+ * * The BTB's block device is removed from the system. To accomodate this
+ * scenario, BTB's are created as device resources, so that the release
+ * function will be called by the driver core when the device is removed.
+ */
+struct blkdev_trig_bdev {
+ unsigned long last_checked;
+ unsigned long last_activity[NR_STAT_GROUPS];
+ unsigned long ios[NR_STAT_GROUPS];
+ unsigned long index;
+ struct block_device *bdev;
+ struct xarray linked_btls;
+};
+
+/**
+ * struct blkdev_trig_led - Trigger-specific data about an LED.
+ * @last_checked: Time (in jiffies) at which the trigger last checked the
+ * the block devices linked to this LED for activity.
+ * @index: &xarray index, so the BTL can be included in one or more
+ * &blkdev_trig_bdev.linked_btls.
+ * @mode: Bitmask for types of block device activity that will
+ * cause this LED to blink --- reads, writes, discards,
+ * etc.
+ * @led: The LED device.
+ * @blink_msec: Duration of a blink (milliseconds).
+ * @check_jiffies: Frequency with which block devices linked to this LED
+ * should be checked for activity (jiffies).
+ * @linked_btbs: The BTBs that represent the block devices linked to the
+ * BTL's LED.
+ * @all_btls_node: The BTL's node in the module's list of all BTLs.
+ *
+ * Every LED associated with the block device trigger gets a "BTL." A BTL is
+ * created when the trigger is "activated" on an LED (usually by writing
+ * ``blkdev`` to the LED's &sysfs &trigger attribute). A BTL is freed wnen its
+ * LED is disassociated from the trigger, either through the trigger's &sysfs
+ * interface or because the LED device is removed from the system.
+ */
+struct blkdev_trig_led {
+ unsigned long last_checked;
+ unsigned long index;
+ unsigned long mode; /* must be ulong for atomic bit ops */
+ struct led_classdev *led;
+ unsigned int blink_msec;
+ unsigned int check_jiffies;
+ struct xarray linked_btbs;
+ struct hlist_node all_btls_node;
+};
+
+/* Protects everything except atomic LED attributes */
+static DEFINE_MUTEX(blkdev_trig_mutex);
+
+/* BTB device resource release function */
+static void blkdev_trig_btb_release(struct device *dev, void *res);
+
+/* Index for next BTB or BTL */
+static unsigned long blkdev_trig_next_index;
+
+/* All LEDs associated with the trigger */
+static HLIST_HEAD(blkdev_trig_all_btls);
+
+/* Delayed work to periodically check for activity & blink LEDs */
+static void blkdev_trig_check(struct work_struct *work);
+static DECLARE_DELAYED_WORK(blkdev_trig_work, blkdev_trig_check);
+
+/* When is the delayed work scheduled to run next (jiffies) */
+static unsigned long blkdev_trig_next_check;
+
+/* Total number of BTB-to-BTL links */
+static unsigned int blkdev_trig_link_count;
+
+/* Empty sysfs attribute list for next 2 declarations */
+static struct attribute *blkdev_trig_attrs_empty[] = { NULL };
+
+/* linked_leds sysfs directory for block devs linked to 1 or more LEDs */
+static const struct attribute_group blkdev_trig_linked_leds = {
+ .name = "linked_leds",
+ .attrs = blkdev_trig_attrs_empty,
+};
+
+/* linked_devices sysfs directory for each LED associated with the trigger */
+static const struct attribute_group blkdev_trig_linked_devs = {
+ .name = "linked_devices",
+ .attrs = blkdev_trig_attrs_empty,
+};
+
+
+/*
+ *
+ * Delayed work to check for activity & blink LEDs
+ *
+ */
+
+/**
+ * blkdev_trig_blink() - Blink an LED, if the correct type of activity has
+ * occurred on the block device.
+ * @btl: The BTL that represents the LED
+ * @btb: The BTB that represents the block device
+ *
+ * Context: Process context. Caller must hold &blkdev_trig_mutex.
+ * Return: &true if the LED is blinked, &false if not.
+ */
+static bool blkdev_trig_blink(const struct blkdev_trig_led *btl,
+ const struct blkdev_trig_bdev *btb)
+{
+ unsigned long mode, mask, delay_on, delay_off;
+ enum stat_group i;
+
+ mode = READ_ONCE(btl->mode);
+
+ for (i = STAT_READ, mask = 1; i <= STAT_FLUSH; ++i, mask <<= 1) {
+
+ if (!(mode & mask))
+ continue;
+
+ if (time_before_eq(btb->last_activity[i], btl->last_checked))
+ continue;
+
+ delay_on = READ_ONCE(btl->blink_msec);
+ delay_off = 1; /* 0 leaves LED turned on */
+
+ led_blink_set_oneshot(btl->led, &delay_on, &delay_off, 0);
+ return true;
+ }
+
+ return false;
+}
+
+/**
+ * blkdev_trig_update_btb() - Update a BTB's activity counters and timestamps.
+ * @btb: The BTB
+ * @now: Timestamp (in jiffies)
+ *
+ * Context: Process context. Caller must hold &blkdev_trig_mutex.
+ */
+static void blkdev_trig_update_btb(struct blkdev_trig_bdev *btb,
+ unsigned long now)
+{
+ unsigned long new_ios;
+ enum stat_group i;
+
+ for (i = STAT_READ; i <= STAT_FLUSH; ++i) {
+
+ new_ios = part_stat_read(btb->bdev, ios[i]);
+
+ if (new_ios != btb->ios[i]) {
+ btb->ios[i] = new_ios;
+ btb->last_activity[i] = now;
+ }
+ }
+
+ btb->last_checked = now;
+}
+
+/**
+ * blkdev_trig_check() - Check linked devices for activity and blink LEDs.
+ * @work: Delayed work (&blkdev_trig_work)
+ *
+ * Context: Process context. Takes and releases &blkdev_trig_mutex.
+ */
+static void blkdev_trig_check(struct work_struct *work)
+{
+ struct blkdev_trig_led *btl;
+ struct blkdev_trig_bdev *btb;
+ unsigned long index, delay, now, led_check, led_delay;
+ bool blinked;
+
+ if (!mutex_trylock(&blkdev_trig_mutex)) {
+ delay = msecs_to_jiffies(BLKDEV_TRIG_CHECK_RETRY);
+ goto exit_reschedule;
+ }
+
+ now = jiffies;
+ delay = ULONG_MAX;
+
+ hlist_for_each_entry (btl, &blkdev_trig_all_btls, all_btls_node) {
+
+ led_check = btl->last_checked + btl->check_jiffies;
+
+ if (time_before_eq(led_check, now)) {
+
+ blinked = false;
+
+ xa_for_each (&btl->linked_btbs, index, btb) {
+
+ if (btb->last_checked != now)
+ blkdev_trig_update_btb(btb, now);
+ if (!blinked)
+ blinked = blkdev_trig_blink(btl, btb);
+ }
+
+ btl->last_checked = now;
+ led_delay = btl->check_jiffies;
+
+ } else {
+ led_delay = led_check - now;
+ }
+
+ if (led_delay < delay)
+ delay = led_delay;
+ }
+
+ mutex_unlock(&blkdev_trig_mutex);
+
+exit_reschedule:
+ WARN_ON_ONCE(delay == ULONG_MAX);
+ WARN_ON_ONCE(!schedule_delayed_work(&blkdev_trig_work, delay));
+}
+
+/**
+ * blkdev_trig_sched_led() - Set the schedule of the delayed work when a new
+ * LED is added to the schedule.
+ * @btl: The BTL that represents the LED
+ *
+ * Called when the number of block devices to which an LED is linked becomes
+ * non-zero.
+ *
+ * Context: Process context. Caller must hold &blkdev_trig_mutex.
+ */
+static void blkdev_trig_sched_led(const struct blkdev_trig_led *btl)
+{
+ unsigned long delay = READ_ONCE(btl->check_jiffies);
+ unsigned long check_by = jiffies + delay;
+
+ /*
+ * If no other LED-to-block device links exist, simply schedule the
+ * delayed work according to this LED's check_interval attribute
+ * (check_jiffies).
+ */
+ if (blkdev_trig_link_count == 0) {
+ WARN_ON(!schedule_delayed_work(&blkdev_trig_work, delay));
+ blkdev_trig_next_check = check_by;
+ return;
+ }
+
+ /*
+ * If the next check is already scheduled to occur soon enough to
+ * accomodate this LED's check_interval, the schedule doesn't need
+ * to be changed.
+ */
+ if (time_after_eq(check_by, blkdev_trig_next_check))
+ return;
+
+ /*
+ * Modify the schedule, so that the delayed work runs soon enough for
+ * this LED.
+ */
+ WARN_ON(!mod_delayed_work(system_wq, &blkdev_trig_work, delay));
+ blkdev_trig_next_check = check_by;
+}
+
+
+/*
+ *
+ * Linking and unlinking LEDs and block devices
+ *
+ */
+
+/**
+ * blkdev_trig_link() - Link a block device to an LED.
+ * @btl: The BTL that represents the LED
+ * @btb: The BTB that represents the block device
+ *
+ * Context: Process context. Caller must hold &blkdev_trig_mutex.
+ * Return: &0 on success, negative &errno on error.
+ */
+static int blkdev_trig_link(struct blkdev_trig_led *btl,
+ struct blkdev_trig_bdev *btb)
+{
+ bool led_first_link;
+ int err;
+
+ led_first_link = xa_empty(&btl->linked_btbs);
+
+ err = xa_insert(&btb->linked_btls, btl->index, btl, GFP_KERNEL);
+ if (err)
+ return err;
+
+ err = xa_insert(&btl->linked_btbs, btb->index, btb, GFP_KERNEL);
+ if (err)
+ goto error_erase_btl;
+
+ /* Create /sys/class/block/<bdev>/linked_leds/<led> symlink */
+ err = sysfs_add_link_to_group(bdev_kobj(btb->bdev),
+ blkdev_trig_linked_leds.name,
+ &btl->led->dev->kobj, btl->led->name);
+ if (err)
+ goto error_erase_btb;
+
+ /* Create /sys/class/leds/<led>/linked_devices/<bdev> symlink */
+ err = sysfs_add_link_to_group(&btl->led->dev->kobj,
+ blkdev_trig_linked_devs.name,
+ bdev_kobj(btb->bdev),
+ dev_name(&btb->bdev->bd_device));
+ if (err)
+ goto error_remove_symlink;
+
+ /*
+ * If this is the first block device linked to this LED, the delayed
+ * work schedule may need to be changed.
+ */
+ if (led_first_link)
+ blkdev_trig_sched_led(btl);
+
+ ++blkdev_trig_link_count;
+
+ return 0;
+
+error_remove_symlink:
+ sysfs_remove_link_from_group(bdev_kobj(btb->bdev),
+ blkdev_trig_linked_leds.name,
+ btl->led->name);
+error_erase_btb:
+ xa_erase(&btl->linked_btbs, btb->index);
+error_erase_btl:
+ xa_erase(&btb->linked_btls, btl->index);
+ return err;
+}
+
+/**
+ * blkdev_trig_put_btb() - Remove and free a BTB, if it is no longer needed.
+ * @btb: The BTB
+ *
+ * Does nothing if the BTB (block device) is still linked to at least one LED.
+ *
+ * Context: Process context. Caller must hold &blkdev_trig_mutex.
+ */
+static void blkdev_trig_put_btb(struct blkdev_trig_bdev *btb)
+{
+ struct block_device *bdev = btb->bdev;
+ int err;
+
+ if (xa_empty(&btb->linked_btls)) {
+
+ sysfs_remove_group(bdev_kobj(bdev), &blkdev_trig_linked_leds);
+ err = devres_destroy(&bdev->bd_device, blkdev_trig_btb_release,
+ NULL, NULL);
+ WARN_ON(err);
+ }
+}
+
+/**
+ * _blkdev_trig_unlink_always() - Perform the unconditionally required steps of
+ * unlinking a block device from an LED.
+ * @btl: The BTL that represents the LED
+ * @btb: The BTB that represents the block device
+ *
+ * When a block device is unlinked from an LED, certain steps must be performed
+ * only if the block device is **not** being released. This function performs
+ * those steps that are **always** required, whether or not the block device is
+ * being released.
+ *
+ * Context: Process context. Caller must hold &blkdev_trig_mutex.
+ */
+static void _blkdev_trig_unlink_always(struct blkdev_trig_led *btl,
+ struct blkdev_trig_bdev *btb)
+{
+ --blkdev_trig_link_count;
+
+ if (blkdev_trig_link_count == 0)
+ WARN_ON(!cancel_delayed_work_sync(&blkdev_trig_work));
+
+ xa_erase(&btb->linked_btls, btl->index);
+ xa_erase(&btl->linked_btbs, btb->index);
+
+ /* Remove /sys/class/leds/<led>/linked_devices/<bdev> symlink */
+ sysfs_remove_link_from_group(&btl->led->dev->kobj,
+ blkdev_trig_linked_devs.name,
+ dev_name(&btb->bdev->bd_device));
+}
+
+/**
+ * blkdev_trig_unlink_norelease() - Unlink an LED from a block device that is
+ * **not** being released.
+ * @btl: The BTL that represents the LED.
+ * @btb: The BTB that represents the block device.
+ *
+ * Context: Process context. Caller must hold &blkdev_trig_mutex.
+ */
+static void blkdev_trig_unlink_norelease(struct blkdev_trig_led *btl,
+ struct blkdev_trig_bdev *btb)
+{
+ _blkdev_trig_unlink_always(btl, btb);
+
+ /* Remove /sys/class/block/<bdev>/linked_leds/<led> symlink */
+ sysfs_remove_link_from_group(bdev_kobj(btb->bdev),
+ blkdev_trig_linked_leds.name,
+ btl->led->name);
+
+ blkdev_trig_put_btb(btb);
+}
+
+/**
+ * blkdev_trig_unlink_release() - Unlink an LED from a block device that is
+ * being released.
+ * @btl: The BTL that represents the LED
+ * @btb: The BTB that represents the block device
+ *
+ * Context: Process context. Caller must hold &blkdev_trig_mutex.
+ */
+static void blkdev_trig_unlink_release(struct blkdev_trig_led *btl,
+ struct blkdev_trig_bdev *btb)
+{
+ _blkdev_trig_unlink_always(btl, btb);
+
+ /*
+ * If the BTB is being released, the driver core has already removed the
+ * device's attribute groups, and the BTB will be freed automatically,
+ * so there's nothing else to do.
+ */
+}
+
+
+/*
+ *
+ * BTB creation
+ *
+ */
+
+/**
+ * blkdev_trig_btb_release() - BTB device resource release function.
+ * @dev: The block device
+ * @res: The BTB
+ *
+ * Called by the driver core when a block device with a BTB is removed.
+ *
+ * Context: Process context. Takes and releases &blkdev_trig_mutex.
+ */
+static void blkdev_trig_btb_release(struct device *dev, void *res)
+{
+ struct blkdev_trig_bdev *btb = res;
+ struct blkdev_trig_led *btl;
+ unsigned long index;
+
+ mutex_lock(&blkdev_trig_mutex);
+
+ xa_for_each (&btb->linked_btls, index, btl)
+ blkdev_trig_unlink_release(btl, btb);
+
+ mutex_unlock(&blkdev_trig_mutex);
+}
+
+/**
+ * blkdev_trig_get_bdev() - Get a block device by path.
+ * @path: The value written to an LED's &link_dev_by_path or
+ * &unlink_dev_by_path attribute, which should be the path to a
+ * special file that represents a block device
+ * @len: The number of characters in &path (not including its
+ * terminating null)
+ *
+ * The caller must call blkdev_put() when finished with the device.
+ *
+ * Context: Process context.
+ * Return: The block device, or an error pointer.
+ */
+static struct block_device *blkdev_trig_get_bdev(const char *path, size_t len)
+{
+ struct block_device *bdev;
+ char *buf;
+
+ buf = kmemdup(path, len + 1, GFP_KERNEL); /* +1 to include null */
+ if (buf == NULL)
+ return ERR_PTR(-ENOMEM);
+
+ bdev = blkdev_get_by_path(strim(buf), BLKDEV_TRIG_FMODE, THIS_MODULE);
+ kfree(buf);
+ return bdev;
+}
+
+/**
+ * blkdev_trig_get_btb() - Find or create the BTB for a block device.
+ * @path: The value written to an LED's &link_dev_by_path attribute,
+ * which should be the path to a special file that represents a
+ * block device
+ * @len: The number of characters in &path
+ *
+ * If a new BTB is created, because the block device was not previously linked
+ * to any LEDs, the block device's &linked_leds &sysfs directory is created.
+ *
+ * Context: Process context. Caller must hold &blkdev_trig_mutex.
+ * Return: Pointer to the BTB, error pointer on error.
+ */
+static struct blkdev_trig_bdev *blkdev_trig_get_btb(const char *path,
+ size_t len)
+{
+ struct block_device *bdev;
+ struct blkdev_trig_bdev *btb;
+ int err;
+
+ bdev = blkdev_trig_get_bdev(path, len);
+ if (IS_ERR(bdev))
+ return ERR_CAST(bdev);
+
+ btb = devres_find(&bdev->bd_device, blkdev_trig_btb_release,
+ NULL, NULL);
+ if (btb != NULL) {
+ err = 0;
+ goto exit_put_bdev;
+ }
+
+ if (blkdev_trig_next_index == ULONG_MAX) {
+ err = -EOVERFLOW;
+ goto exit_put_bdev;
+ }
+
+ btb = devres_alloc(blkdev_trig_btb_release, sizeof(*btb), GFP_KERNEL);
+ if (btb == NULL) {
+ err = -ENOMEM;
+ goto exit_put_bdev;
+ }
+
+ err = sysfs_create_group(bdev_kobj(bdev), &blkdev_trig_linked_leds);
+ if (err)
+ goto exit_free_btb;
+
+ btb->index = blkdev_trig_next_index++;
+ btb->bdev = bdev;
+ xa_init(&btb->linked_btls);
+
+ /* Populate BTB activity counters */
+ blkdev_trig_update_btb(btb, jiffies);
+
+ devres_add(&bdev->bd_device, btb);
+
+exit_free_btb:
+ if (err)
+ devres_free(btb);
+exit_put_bdev:
+ blkdev_put(bdev, BLKDEV_TRIG_FMODE);
+ return err ? ERR_PTR(err) : btb;
+}
+
+
+/*
+ *
+ * Activating and deactivating the trigger on an LED
+ *
+ */
+
+/**
+ * blkdev_trig_activate() - Called by the LEDs subsystem when an LED is
+ * associated with the trigger.
+ * @led: The LED
+ *
+ * Context: Process context. Takes and releases &blkdev_trig_mutex.
+ * Return: &0 on success, negative &errno on error.
+ */
+static int blkdev_trig_activate(struct led_classdev *led)
+{
+ struct blkdev_trig_led *btl;
+ int err;
+
+ btl = kzalloc(sizeof(*btl), GFP_KERNEL);
+ if (btl == NULL)
+ return -ENOMEM;
+
+ err = mutex_lock_interruptible(&blkdev_trig_mutex);
+ if (err)
+ goto exit_free;
+
+ if (blkdev_trig_next_index == ULONG_MAX) {
+ err = -EOVERFLOW;
+ goto exit_unlock;
+ }
+
+ btl->index = blkdev_trig_next_index++;
+ btl->last_checked = jiffies;
+ btl->mode = -1; /* set all bits */
+ btl->led = led;
+ btl->blink_msec = BLKDEV_TRIG_BLINK_DEF;
+ btl->check_jiffies = msecs_to_jiffies(BLKDEV_TRIG_CHECK_DEF);
+ xa_init(&btl->linked_btbs);
+
+ hlist_add_head(&btl->all_btls_node, &blkdev_trig_all_btls);
+ led_set_trigger_data(led, btl);
+
+exit_unlock:
+ mutex_unlock(&blkdev_trig_mutex);
+exit_free:
+ if (err)
+ kfree(btl);
+ return err;
+}
+
+/**
+ * blkdev_trig_deactivate() - Called by the the LEDs subsystem when an LED is
+ * disassociated from the trigger.
+ * @led: The LED
+ *
+ * The LEDs subsystem also calls this function when an LED associated with the
+ * trigger is removed or when the trigger is unregistered (if the module is
+ * unloaded).
+ *
+ * Context: Process context. Takes and releases &blkdev_trig_mutex.
+ */
+static void blkdev_trig_deactivate(struct led_classdev *led)
+{
+ struct blkdev_trig_led *btl = led_get_trigger_data(led);
+ struct blkdev_trig_bdev *btb;
+ unsigned long index;
+
+ mutex_lock(&blkdev_trig_mutex);
+
+ xa_for_each (&btl->linked_btbs, index, btb)
+ blkdev_trig_unlink_norelease(btl, btb);
+
+ hlist_del(&btl->all_btls_node);
+ kfree(btl);
+
+ mutex_unlock(&blkdev_trig_mutex);
+}
+
+
+/*
+ *
+ * Link-related attribute store functions
+ *
+ */
+
+/**
+ * link_dev_by_path_store() - &link_dev_by_path device attribute store function.
+ * @dev: The LED device
+ * @attr: The &link_dev_by_path attribute (&dev_attr_link_dev_by_path)
+ * @buf: The value written to the attribute, which should be the path to
+ * a special file that represents a block device to be linked to
+ * the LED (e.g. ``/dev/sda``)
+ * @count: The number of characters in &buf
+ *
+ * Context: Process context. Takes and releases &blkdev_trig_mutex.
+ * Return: &count on success, negative &errno on error.
+ */
+static ssize_t link_dev_by_path_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct blkdev_trig_led *btl = led_trigger_get_drvdata(dev);
+ struct blkdev_trig_bdev *btb;
+ int err;
+
+ err = mutex_lock_interruptible(&blkdev_trig_mutex);
+ if (err)
+ return err;
+
+ btb = blkdev_trig_get_btb(buf, count);
+ if (IS_ERR(btb)) {
+ err = PTR_ERR(btb);
+ goto exit_unlock;
+ }
+
+ if (xa_load(&btb->linked_btls, btl->index) != NULL) {
+ err = -EEXIST;
+ goto exit_put_btb;
+ }
+
+ err = blkdev_trig_link(btl, btb);
+
+exit_put_btb:
+ if (err)
+ blkdev_trig_put_btb(btb);
+exit_unlock:
+ mutex_unlock(&blkdev_trig_mutex);
+ return err ? : count;
+}
+
+/**
+ * unlink_dev_by_path_store() - &unlink_dev_by_path device attribute store
+ * function.
+ * @dev: The LED device
+ * @attr: The &unlink_dev_by_path attribute (&dev_attr_unlink_dev_by_path)
+ * @buf: The value written to the attribute, which should be the path to
+ * a special file that represents a block device to be unlinked
+ * from the LED (e.g. ``/dev/sda``)
+ * @count: The number of characters in &buf
+ *
+ * Context: Process context. Takes and releases &blkdev_trig_mutex.
+ * Return: &count on success, negative &errno on error.
+ */
+static ssize_t unlink_dev_by_path_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct blkdev_trig_led *btl = led_trigger_get_drvdata(dev);
+ struct block_device *bdev;
+ struct blkdev_trig_bdev *btb;
+ int err;
+
+ bdev = blkdev_trig_get_bdev(buf, count);
+ if (IS_ERR(bdev))
+ return PTR_ERR(bdev);
+
+ err = mutex_lock_interruptible(&blkdev_trig_mutex);
+ if (err)
+ goto exit_put_bdev;
+
+ btb = devres_find(&bdev->bd_device, blkdev_trig_btb_release,
+ NULL, NULL);
+ if (btb == NULL) {
+ err = -EUNATCH; /* bdev isn't linked to any LED */
+ goto exit_unlock;
+ }
+
+ if (xa_load(&btb->linked_btls, btl->index) == NULL) {
+ err = -EUNATCH; /* bdev isn't linked to this LED */
+ goto exit_unlock;
+ }
+
+ blkdev_trig_unlink_norelease(btl, btb);
+
+exit_unlock:
+ mutex_unlock(&blkdev_trig_mutex);
+exit_put_bdev:
+ blkdev_put(bdev, BLKDEV_TRIG_FMODE);
+ return err ? : count;
+}
+
+/**
+ * unlink_dev_by_name_store() - &unlink_dev_by_name device attribute store
+ * function.
+ * @dev: The LED device
+ * @attr: The &unlink_dev_by_name attribute (&dev_attr_unlink_dev_by_name)
+ * @buf: The value written to the attribute, which should be the kernel
+ * name of a block device to be unlinked from the LED (e.g.
+ * ``sda``)
+ * @count: The number of characters in &buf
+ *
+ * Context: Process context. Takes and releases &blkdev_trig_mutex.
+ * Return: &count on success, negative &errno on error.
+ */
+static ssize_t unlink_dev_by_name_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct blkdev_trig_led *btl = led_trigger_get_drvdata(dev);
+ struct blkdev_trig_bdev *btb;
+ unsigned long index;
+ int err;
+
+ err = mutex_lock_interruptible(&blkdev_trig_mutex);
+ if (err)
+ return err;
+
+ err = -EUNATCH;
+
+ xa_for_each (&btl->linked_btbs, index, btb) {
+
+ if (sysfs_streq(dev_name(&btb->bdev->bd_device), buf)) {
+ blkdev_trig_unlink_norelease(btl, btb);
+ err = 0;
+ break;
+ }
+ }
+
+ mutex_unlock(&blkdev_trig_mutex);
+ return err ? : count;
+}
+
+
+/*
+ *
+ * Atomic attribute show & store functions
+ *
+ */
+
+/**
+ * blink_time_show() - &blink_time device attribute show function.
+ * @dev: The LED device
+ * @attr: The &blink_time attribute (&dev_attr_blink_time)
+ * @buf: Output buffer
+ *
+ * Writes the value of &blkdev_trig_led.blink_msec to &buf.
+ *
+ * Context: Process context.
+ * Return: The number of characters written to &buf.
+ */
+static ssize_t blink_time_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ const struct blkdev_trig_led *btl = led_trigger_get_drvdata(dev);
+
+ return sprintf(buf, "%u\n", READ_ONCE(btl->blink_msec));
+}
+
+/**
+ * blink_time_store() - &blink_time device attribute store function.
+ * @dev: The LED device
+ * @attr: The &blink_time attribute (&dev_attr_blink_time)
+ * @buf: The new value (as written to the &sysfs attribute)
+ * @count: The number of characters in &buf
+ *
+ * Sets &blkdev_trig_led.blink_msec to the value in &buf.
+ *
+ * Context: Process context.
+ * Return: &count on success, negative &errno on error.
+ */
+static ssize_t blink_time_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct blkdev_trig_led *btl = led_trigger_get_drvdata(dev);
+ unsigned int value;
+ int err;
+
+ err = kstrtouint(buf, 0, &value);
+ if (err)
+ return err;
+
+ if (value < BLKDEV_TRIG_BLINK_MIN || value > BLKDEV_TRIG_BLINK_MAX)
+ return -ERANGE;
+
+ WRITE_ONCE(btl->blink_msec, value);
+ return count;
+}
+
+/**
+ * check_interval_show() - &check_interval device attribute show function.
+ * @dev: The LED device
+ * @attr: The &check_interval attribute (&dev_attr_check_interval)
+ * @buf: Output buffer
+ *
+ * Writes the value of &blkdev_trig_led.check_jiffies (converted to
+ * milliseconds) to &buf.
+ *
+ * Context: Process context.
+ * Return: The number of characters written to &buf.
+ */
+static ssize_t check_interval_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct blkdev_trig_led *btl = led_trigger_get_drvdata(dev);
+
+ return sprintf(buf, "%u\n",
+ jiffies_to_msecs(READ_ONCE(btl->check_jiffies)));
+}
+
+/**
+ * check_interval_store() - &check_interval device attribute store function
+ * @dev: The LED device
+ * @attr: The &check_interval attribute (&dev_attr_check_interval)
+ * @buf: The new value (as written to the &sysfs attribute)
+ * @count: The number of characters in &buf
+ *
+ * Sets &blkdev_trig_led.check_jiffies to the value in &buf (after converting
+ * from milliseconds).
+ *
+ * Context: Process context.
+ * Return: &count on success, negative &errno on error.
+ */
+static ssize_t check_interval_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct blkdev_trig_led *led = led_trigger_get_drvdata(dev);
+ unsigned int value;
+ int err;
+
+ err = kstrtouint(buf, 0, &value);
+ if (err)
+ return err;
+
+ if (value < BLKDEV_TRIG_CHECK_MIN || value > BLKDEV_TRIG_CHECK_MAX)
+ return -ERANGE;
+
+ WRITE_ONCE(led->check_jiffies, msecs_to_jiffies(value));
+
+ return count;
+}
+
+/**
+ * blkdev_trig_mode_show() - Helper for boolean attribute show functions.
+ * @led: The LED
+ * @buf: Output buffer
+ * @bit: Which bit to show
+ *
+ * Context: Process context.
+ * Return: The number of characters written to &buf.
+ */
+static int blkdev_trig_mode_show(const struct blkdev_trig_led *led, char *buf,
+ enum stat_group bit)
+{
+ return sprintf(buf, READ_ONCE(led->mode) & (1 << bit) ? "Y\n" : "N\n");
+}
+
+/**
+ * blkdev_trig_mode_store() - Helper for boolean attribute store functions.
+ * @led: The LED
+ * @buf: The new value (as written to the &sysfs attribute)
+ * @count: The number of characters in &buf
+ * @bit: Which bit to set
+ *
+ * Context: Process context.
+ * Return: &count on success, negative &errno on error.
+ */
+static int blkdev_trig_mode_store(struct blkdev_trig_led *led,
+ const char *buf, size_t count,
+ enum stat_group bit)
+{
+ bool set;
+ int err;
+
+ err = kstrtobool(buf, &set);
+ if (err)
+ return err;
+
+ if (set)
+ set_bit(bit, &led->mode);
+ else
+ clear_bit(bit, &led->mode);
+
+ return count;
+}
+
+/**
+ * blink_on_read_show() - &blink_on_read device attribute show function.
+ * @dev: The LED device
+ * @attr: The &blink_on_read attribute (&dev_attr_blink_on_read)
+ * @buf: Output buffer
+ *
+ * Writes ``Y`` or ``N`` to &buf, depending on whether the &STAT_READ bit in
+ * &blkdev_trig_led.mode is set or cleared.
+ *
+ * Context: Process context.
+ * Return: The number of characters written to &buf.
+ */
+static ssize_t blink_on_read_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return blkdev_trig_mode_show(led_trigger_get_drvdata(dev),
+ buf, STAT_READ);
+}
+
+/**
+ * blink_on_read_store() - &blink_on_read device attribute store function.
+ * @dev: The LED device
+ * @attr: The &blink_on_read attribute (&dev_attr_blink_on_read)
+ * @buf: The new value (as written to the &sysfs attribute)
+ * @count: The number of characters in &buf
+ *
+ * Sets the &STAT_READ bit in &blkdev_trig_led.mode to the value in &buf
+ * (interpretted as a boolean).
+ *
+ * Context: Process context.
+ * Return: &count on success, negative &errno on error.
+ */
+static ssize_t blink_on_read_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ return blkdev_trig_mode_store(led_trigger_get_drvdata(dev),
+ buf, count, STAT_READ);
+}
+
+/**
+ * blink_on_write_show() - &blink_on_write device attribute show function.
+ * @dev: The LED device
+ * @attr: The &blink_on_write attribute (&dev_attr_blink_on_write)
+ * @buf: Output buffer
+ *
+ * Writes ``Y`` or ``N`` to &buf, depending on whether the &STAT_WRITE bit in
+ * in &blkdev_trig_led.mode is set or cleared.
+ *
+ * Context: Process context.
+ * Return: The number of characters written to &buf.
+ */
+static ssize_t blink_on_write_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return blkdev_trig_mode_show(led_trigger_get_drvdata(dev),
+ buf, STAT_WRITE);
+}
+
+/**
+ * blink_on_write_store() - &blink_on_write device attribute store function.
+ * @dev: The LED device
+ * @attr: The &blink_on_write attribute (&dev_attr_blink_on_write)
+ * @buf: The new value (as written to the &sysfs attribute)
+ * @count: The number of characters in &buf
+ *
+ * Sets the &STAT_WRITE bit in &blkdev_trig_led.mode to the value in &buf
+ * (interpretted as a boolean).
+ *
+ * Context: Process context.
+ * Return: &count on success, negative &errno on error.
+ */
+static ssize_t blink_on_write_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ return blkdev_trig_mode_store(led_trigger_get_drvdata(dev),
+ buf, count, STAT_WRITE);
+}
+
+/**
+ * blink_on_flush_show() - &blink_on_flush device attribute show function.
+ * @dev: The LED device
+ * @attr: The &blink_on_flush attribute (&dev_attr_blink_on_flush)
+ * @buf: Output buffer
+ *
+ * Writes ``Y`` or ``N`` to &buf, depending whether the &STAT_FLUSH bit in
+ * &blkdev_trig_led.mode is set or cleared.
+ *
+ * Context: Process context.
+ * Return: The number of characters written to &buf.
+ */
+static ssize_t blink_on_flush_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return blkdev_trig_mode_show(led_trigger_get_drvdata(dev),
+ buf, STAT_FLUSH);
+}
+
+/**
+ * blink_on_flush_store() - &blink_on_flush device attribute store function.
+ * @dev: The LED device
+ * @attr: The &blink_on_flush attribute (&dev_attr_blink_on_flush)
+ * @buf: The new value (as written to the &sysfs attribute)
+ * @count: The number of characters in &buf
+ *
+ * Sets the &STAT_FLUSH bit in &blkdev_trig_led.mode to the value in &buf
+ * (interpretted as a boolean).
+ *
+ * Context: Process context.
+ * Return: &count on success, negative &errno on error.
+ */
+static ssize_t blink_on_flush_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ return blkdev_trig_mode_store(led_trigger_get_drvdata(dev),
+ buf, count, STAT_FLUSH);
+}
+
+/**
+ * blink_on_discard_show() - &blink_on_discard device attribute show function.
+ * @dev: The LED device
+ * @attr: The &blink_on_discard attribute (&dev_attr_blink_on_discard)
+ * @buf: Output buffer
+ *
+ * Writes ``Y`` or ``N`` to &buf, depending on whether the &STAT_DISCARD bit in
+ * &blkdev_trig_led.mode is set or cleared.
+ *
+ * Context: Process context.
+ * Return: The number of characters written to &buf.
+ */
+static ssize_t blink_on_discard_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return blkdev_trig_mode_show(led_trigger_get_drvdata(dev),
+ buf, STAT_DISCARD);
+}
+
+/**
+ * blink_on_discard_store() - &blink_on_discard device attribute store function.
+ * @dev: The LED device
+ * @attr: The &blink_on_discard attribute (&dev_attr_blink_on_discard)
+ * @buf: The new value (as written to the &sysfs attribute)
+ * @count: The number of characters in &buf
+ *
+ * Sets the &STAT_DISCARD bit in &blkdev_trig_led.mode to the value in &buf
+ * (interpretted as a boolean).
+ *
+ * Context: Process context.
+ * Return: &count on success, negative &errno on error.
+ */
+static ssize_t blink_on_discard_store(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ return blkdev_trig_mode_store(led_trigger_get_drvdata(dev),
+ buf, count, STAT_DISCARD);
+}
+
+/* Device attributes */
+static DEVICE_ATTR_WO(link_dev_by_path);
+static DEVICE_ATTR_WO(unlink_dev_by_path);
+static DEVICE_ATTR_WO(unlink_dev_by_name);
+static DEVICE_ATTR_RW(blink_time);
+static DEVICE_ATTR_RW(check_interval);
+static DEVICE_ATTR_RW(blink_on_read);
+static DEVICE_ATTR_RW(blink_on_write);
+static DEVICE_ATTR_RW(blink_on_flush);
+static DEVICE_ATTR_RW(blink_on_discard);
+
+/* Device attributes in LED directory (/sys/class/leds/<led>/...) */
+static struct attribute *blkdev_trig_attrs[] = {
+ &dev_attr_link_dev_by_path.attr,
+ &dev_attr_unlink_dev_by_path.attr,
+ &dev_attr_unlink_dev_by_name.attr,
+ &dev_attr_blink_time.attr,
+ &dev_attr_check_interval.attr,
+ &dev_attr_blink_on_read.attr,
+ &dev_attr_blink_on_write.attr,
+ &dev_attr_blink_on_flush.attr,
+ &dev_attr_blink_on_discard.attr,
+ NULL
+};
+
+/* Unnamed attribute group == no subdirectory */
+static const struct attribute_group blkdev_trig_attr_group = {
+ .attrs = blkdev_trig_attrs,
+};
+
+/* Attribute groups for the trigger */
+static const struct attribute_group *blkdev_trig_attr_groups[] = {
+ &blkdev_trig_attr_group, /* /sys/class/leds/<led>/... */
+ &blkdev_trig_linked_devs, /* /sys/class/leds/<led>/linked_devices/ */
+ NULL
+};
+
+/* Trigger registration data */
+static struct led_trigger blkdev_trig_trigger = {
+ .name = "blkdev",
+ .activate = blkdev_trig_activate,
+ .deactivate = blkdev_trig_deactivate,
+ .groups = blkdev_trig_attr_groups,
+};
+
+/**
+ * blkdev_trig_init() - Block device LED trigger initialization.
+ *
+ * Registers the ``blkdev`` LED trigger.
+ *
+ * Return: &0 on success, negative &errno on failure.
+ */
+static int __init blkdev_trig_init(void)
+{
+ return led_trigger_register(&blkdev_trig_trigger);
+}
+module_init(blkdev_trig_init);
+
+/**
+ * blkdev_trig_exit() - Block device LED trigger module exit.
+ *
+ * Unregisters the ``blkdev`` LED trigger.
+ */
+static void __exit blkdev_trig_exit(void)
+{
+ led_trigger_unregister(&blkdev_trig_trigger);
+}
+module_exit(blkdev_trig_exit);
+
+MODULE_DESCRIPTION("Block device LED trigger");
+MODULE_AUTHOR("Ian Pilcher <[email protected]>");
+MODULE_LICENSE("GPL v2");
--
2.37.3