2022-10-12 10:56:46

by Jim Lin

[permalink] [raw]
Subject: [PATCH v3] xhci: tegra: USB2 pad power controls

Program USB2 pad PD controls during port connect/disconnect, port
suspend/resume, and test mode, to reduce power consumption on
disconnect or suspend.

Signed-off-by: Jim Lin <[email protected]>
---
v2: Fix issue that wrong tegra->phys[] may be accessed on tegra124
v3: No change on copyright

drivers/usb/host/xhci-tegra.c | 139 +++++++++++++++++++++++++++++++++-
1 file changed, 138 insertions(+), 1 deletion(-)

diff --git a/drivers/usb/host/xhci-tegra.c b/drivers/usb/host/xhci-tegra.c
index c8af2cd2216d..996182a1959f 100644
--- a/drivers/usb/host/xhci-tegra.c
+++ b/drivers/usb/host/xhci-tegra.c
@@ -189,6 +189,13 @@ struct tegra_xusb_context_soc {
} fpci;
};

+enum tegra_xhci_phy_type {
+ USB3_PHY,
+ USB2_PHY,
+ HSIC_PHY,
+ MAX_PHY_TYPES,
+};
+
struct tegra_xusb_soc {
const char *firmware;
const char * const *supply_names;
@@ -274,9 +281,17 @@ struct tegra_xusb {

bool suspended;
struct tegra_xusb_context context;
+ u32 enable_utmi_pad_after_lp0_exit;
};

static struct hc_driver __read_mostly tegra_xhci_hc_driver;
+static int (*original_xhci_hub_control)(struct usb_hcd *hcd, u16 typeReq, u16 wValue, u16 wIndex,
+ char *buf, u16 wLength);
+
+static inline struct tegra_xusb *hcd_to_tegra_xusb(struct usb_hcd *hcd)
+{
+ return (struct tegra_xusb *) dev_get_drvdata(hcd->self.controller);
+}

static inline u32 fpci_readl(struct tegra_xusb *tegra, unsigned int offset)
{
@@ -1949,12 +1964,30 @@ static void tegra_xhci_enable_phy_sleepwalk_wake(struct tegra_xusb *tegra)
static void tegra_xhci_disable_phy_wake(struct tegra_xusb *tegra)
{
struct tegra_xusb_padctl *padctl = tegra->padctl;
- unsigned int i;
+ unsigned int i, j;

for (i = 0; i < tegra->num_phys; i++) {
if (!tegra->phys[i])
continue;
+ if (tegra_xusb_padctl_remote_wake_detected(padctl, tegra->phys[i])) {
+ if (i < tegra->soc->phy_types[USB3_PHY].num) {
+ /* USB3 */
+ j = i;
+ } else if (i < (tegra->soc->phy_types[USB3_PHY].num +
+ tegra->soc->phy_types[USB2_PHY].num)) {
+ /* USB2 */
+ j = i - tegra->soc->phy_types[USB3_PHY].num;
+ tegra_phy_xusb_utmi_pad_power_on(tegra->phys[i]);
+ } else {
+ /* HSIC */
+ j = i - (tegra->soc->phy_types[USB3_PHY].num +
+ tegra->soc->phy_types[USB2_PHY].num);
+ }
+ dev_dbg(tegra->dev,
+ "%s port %u (0 based) remote wake detected\n",
+ dev_name(&tegra->phys[i]->dev), j);

+ }
tegra_xusb_padctl_disable_phy_wake(padctl, tegra->phys[i]);
}
}
@@ -1972,6 +2005,23 @@ static void tegra_xhci_disable_phy_sleepwalk(struct tegra_xusb *tegra)
}
}

+static void tegra_xhci_program_utmi_power_lp0_exit(struct tegra_xusb *tegra)
+{
+ unsigned int i;
+
+ for (i = 0; i < tegra->soc->phy_types[USB2_PHY].num; i++) {
+ if (!is_host_mode_phy(tegra, USB2_PHY, i))
+ continue;
+ /* USB2 */
+ if (tegra->enable_utmi_pad_after_lp0_exit & BIT(i))
+ tegra_phy_xusb_utmi_pad_power_on(
+ tegra->phys[tegra->soc->phy_types[USB3_PHY].num + i]);
+ else
+ tegra_phy_xusb_utmi_pad_power_down(
+ tegra->phys[tegra->soc->phy_types[USB3_PHY].num + i]);
+ }
+}
+
static int tegra_xusb_enter_elpg(struct tegra_xusb *tegra, bool runtime)
{
struct xhci_hcd *xhci = hcd_to_xhci(tegra->hcd);
@@ -1980,6 +2030,7 @@ static int tegra_xusb_enter_elpg(struct tegra_xusb *tegra, bool runtime)
unsigned int i;
int err;
u32 usbcmd;
+ u32 portsc;

dev_dbg(dev, "entering ELPG\n");

@@ -1993,6 +2044,15 @@ static int tegra_xusb_enter_elpg(struct tegra_xusb *tegra, bool runtime)
goto out;
}

+ for (i = 0; i < tegra->soc->phy_types[USB2_PHY].num; i++) {
+ if (!xhci->usb2_rhub.ports[i])
+ continue;
+ portsc = readl(xhci->usb2_rhub.ports[i]->addr);
+ tegra->enable_utmi_pad_after_lp0_exit &= ~BIT(i);
+ if (((portsc & PORT_PLS_MASK) == XDEV_U3) || ((portsc & DEV_SPEED_MASK) == XDEV_FS))
+ tegra->enable_utmi_pad_after_lp0_exit |= BIT(i);
+ }
+
err = xhci_suspend(xhci, wakeup);
if (err < 0) {
dev_err(tegra->dev, "failed to suspend XHCI: %d\n", err);
@@ -2066,6 +2126,8 @@ static int tegra_xusb_exit_elpg(struct tegra_xusb *tegra, bool runtime)

phy_power_on(tegra->phys[i]);
}
+ if (tegra->suspended)
+ tegra_xhci_program_utmi_power_lp0_exit(tegra);

tegra_xusb_config(tegra);
tegra_xusb_restore_context(tegra);
@@ -2437,6 +2499,79 @@ static int tegra_xhci_setup(struct usb_hcd *hcd)
return xhci_gen_setup(hcd, tegra_xhci_quirks);
}

+static int tegra_xhci_hub_control(struct usb_hcd *hcd, u16 type_req, u16 value, u16 index,
+ char *buf, u16 length)
+{
+ struct tegra_xusb *tegra = hcd_to_tegra_xusb(hcd);
+ struct xhci_hcd *xhci = hcd_to_xhci(hcd);
+ struct xhci_hub *rhub;
+ struct xhci_bus_state *bus_state;
+ int port = (index & 0xff) - 1;
+ int i;
+ struct xhci_port **ports;
+ u32 portsc;
+ int ret;
+
+ rhub = &xhci->usb2_rhub;
+ bus_state = &rhub->bus_state;
+ if (bus_state->resuming_ports && hcd->speed == HCD_USB2) {
+ ports = rhub->ports;
+ i = rhub->num_ports;
+ while (i--) {
+ if (!test_bit(i, &bus_state->resuming_ports))
+ continue;
+ portsc = readl(ports[i]->addr);
+ if ((portsc & PORT_PLS_MASK) == XDEV_RESUME)
+ tegra_phy_xusb_utmi_pad_power_on(
+ tegra->phys[tegra->soc->phy_types[USB3_PHY].num + i]);
+ }
+ }
+
+ if (hcd->speed == HCD_USB2) {
+ i = tegra->soc->phy_types[USB3_PHY].num + port;
+ if ((type_req == ClearPortFeature) && (value == USB_PORT_FEAT_SUSPEND)) {
+ if (!index || index > rhub->num_ports)
+ return -EPIPE;
+ tegra_phy_xusb_utmi_pad_power_on(tegra->phys[i]);
+ }
+ if ((type_req == SetPortFeature) && (value == USB_PORT_FEAT_RESET)) {
+ if (!index || index > rhub->num_ports)
+ return -EPIPE;
+ ports = rhub->ports;
+ portsc = readl(ports[port]->addr);
+ if (portsc & PORT_CONNECT)
+ tegra_phy_xusb_utmi_pad_power_on(tegra->phys[i]);
+ }
+ }
+
+ ret = (*original_xhci_hub_control)(hcd, type_req, value, index, buf, length);
+ if (ret < 0)
+ return ret;
+
+ if (hcd->speed == HCD_USB2) {
+ if ((type_req == SetPortFeature) && (value == USB_PORT_FEAT_SUSPEND))
+ /* We don't suspend the PAD while HNP role swap happens on the OTG port */
+ if (!((hcd->self.otg_port == (port + 1)) && hcd->self.b_hnp_enable))
+ tegra_phy_xusb_utmi_pad_power_down(tegra->phys[i]);
+
+ if ((type_req == ClearPortFeature) && (value == USB_PORT_FEAT_C_CONNECTION)) {
+ ports = rhub->ports;
+ portsc = readl(ports[port]->addr);
+ if (!(portsc & PORT_CONNECT)) {
+ /* We don't suspend the PAD while HNP role swap happens on the OTG
+ * port
+ */
+ if (!((hcd->self.otg_port == (port + 1)) && hcd->self.b_hnp_enable))
+ tegra_phy_xusb_utmi_pad_power_down(tegra->phys[i]);
+ }
+ }
+ if ((type_req == SetPortFeature) && (value == USB_PORT_FEAT_TEST))
+ tegra_phy_xusb_utmi_pad_power_on(tegra->phys[i]);
+ }
+
+ return ret;
+}
+
static const struct xhci_driver_overrides tegra_xhci_overrides __initconst = {
.reset = tegra_xhci_setup,
};
@@ -2444,6 +2579,8 @@ static const struct xhci_driver_overrides tegra_xhci_overrides __initconst = {
static int __init tegra_xusb_init(void)
{
xhci_init_driver(&tegra_xhci_hc_driver, &tegra_xhci_overrides);
+ original_xhci_hub_control = tegra_xhci_hc_driver.hub_control;
+ tegra_xhci_hc_driver.hub_control = tegra_xhci_hub_control;

return platform_driver_register(&tegra_xusb_driver);
}
--
2.17.1


2022-10-12 11:43:59

by Greg Kroah-Hartman

[permalink] [raw]
Subject: Re: [PATCH v3] xhci: tegra: USB2 pad power controls

On Wed, Oct 12, 2022 at 06:25:11PM +0800, Jim Lin wrote:
> +static inline struct tegra_xusb *hcd_to_tegra_xusb(struct usb_hcd *hcd)
> +{
> + return (struct tegra_xusb *) dev_get_drvdata(hcd->self.controller);

No need for the cast (and if there was, no need for the extra space).

thanks,

greg k-h

2022-10-12 11:46:38

by Jon Hunter

[permalink] [raw]
Subject: Re: [PATCH v3] xhci: tegra: USB2 pad power controls


On 12/10/2022 12:18, Greg KH wrote:
> On Wed, Oct 12, 2022 at 06:25:11PM +0800, Jim Lin wrote:
>> +static inline struct tegra_xusb *hcd_to_tegra_xusb(struct usb_hcd *hcd)
>> +{
>> + return (struct tegra_xusb *) dev_get_drvdata(hcd->self.controller);
>
> No need for the cast (and if there was, no need for the extra space).

May be best to drop this inline function completely and call
dev_get_drvdata() directly. I only see it used in one place.

Jon

--
nvpublic

2022-10-12 12:02:25

by Jon Hunter

[permalink] [raw]
Subject: Re: [PATCH v3] xhci: tegra: USB2 pad power controls


On 12/10/2022 11:25, Jim Lin wrote:
> Program USB2 pad PD controls during port connect/disconnect, port
> suspend/resume, and test mode, to reduce power consumption on
> disconnect or suspend.
>
> Signed-off-by: Jim Lin <[email protected]>
> ---
> v2: Fix issue that wrong tegra->phys[] may be accessed on tegra124
> v3: No change on copyright
>
> drivers/usb/host/xhci-tegra.c | 139 +++++++++++++++++++++++++++++++++-
> 1 file changed, 138 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/usb/host/xhci-tegra.c b/drivers/usb/host/xhci-tegra.c
> index c8af2cd2216d..996182a1959f 100644
> --- a/drivers/usb/host/xhci-tegra.c
> +++ b/drivers/usb/host/xhci-tegra.c
> @@ -189,6 +189,13 @@ struct tegra_xusb_context_soc {
> } fpci;
> };
>
> +enum tegra_xhci_phy_type {
> + USB3_PHY,
> + USB2_PHY,
> + HSIC_PHY,
> + MAX_PHY_TYPES,
> +};
> +
> struct tegra_xusb_soc {
> const char *firmware;
> const char * const *supply_names;
> @@ -274,9 +281,17 @@ struct tegra_xusb {
>
> bool suspended;
> struct tegra_xusb_context context;
> + u32 enable_utmi_pad_after_lp0_exit;
> };
>
> static struct hc_driver __read_mostly tegra_xhci_hc_driver;
> +static int (*original_xhci_hub_control)(struct usb_hcd *hcd, u16 typeReq, u16 wValue, u16 wIndex,
> + char *buf, u16 wLength);

Is it better to add this function pointer to the tegra_xusb structure?

Jon

--
nvpublic

2022-10-14 10:08:50

by Jim Lin

[permalink] [raw]
Subject: Re: [PATCH v3] xhci: tegra: USB2 pad power controls

On Wed, 2022-10-12 at 12:43 +0100, Jon Hunter wrote:
> On 12/10/2022 12:18, Greg KH wrote:
> > On Wed, Oct 12, 2022 at 06:25:11PM +0800, Jim Lin wrote:
> > > +static inline struct tegra_xusb *hcd_to_tegra_xusb(struct
> > > usb_hcd *hcd)
> > > +{
> > > + return (struct tegra_xusb *) dev_get_drvdata(hcd-
> > > >self.controller);
> >
> > No need for the cast (and if there was, no need for the extra
> > space).
>
> May be best to drop this inline function completely and call
> dev_get_drvdata() directly. I only see it used in one place.
>
> Jon
>
Thanks, will do.

--nvpublic

2022-10-17 10:15:40

by Jim Lin

[permalink] [raw]
Subject: Re: [PATCH v3] xhci: tegra: USB2 pad power controls

On Wed, 2022-10-12 at 12:45 +0100, Jon Hunter wrote:
> On 12/10/2022 11:25, Jim Lin wrote:
> > Program USB2 pad PD controls during port connect/disconnect, port
> > suspend/resume, and test mode, to reduce power consumption on
> > disconnect or suspend.
> >
> > Signed-off-by: Jim Lin <[email protected]>
> > ---
> > v2: Fix issue that wrong tegra->phys[] may be accessed on tegra124
> > v3: No change on copyright
> >
> > drivers/usb/host/xhci-tegra.c | 139
> > +++++++++++++++++++++++++++++++++-
> > 1 file changed, 138 insertions(+), 1 deletion(-)
> >
> > diff --git a/drivers/usb/host/xhci-tegra.c b/drivers/usb/host/xhci-
> > tegra.c
> > index c8af2cd2216d..996182a1959f 100644
> > --- a/drivers/usb/host/xhci-tegra.c
> > +++ b/drivers/usb/host/xhci-tegra.c
> > @@ -189,6 +189,13 @@ struct tegra_xusb_context_soc {
> > } fpci;
> > };
> >
> > +enum tegra_xhci_phy_type {
> > + USB3_PHY,
> > + USB2_PHY,
> > + HSIC_PHY,
> > + MAX_PHY_TYPES,
> > +};
> > +
> > struct tegra_xusb_soc {
> > const char *firmware;
> > const char * const *supply_names;
> > @@ -274,9 +281,17 @@ struct tegra_xusb {
> >
> > bool suspended;
> > struct tegra_xusb_context context;
> > + u32 enable_utmi_pad_after_lp0_exit;
> > };
> >
> > static struct hc_driver __read_mostly tegra_xhci_hc_driver;
> > +static int (*original_xhci_hub_control)(struct usb_hcd *hcd, u16
> > typeReq, u16 wValue, u16 wIndex,
> > + char *buf, u16 wLength);
>
> Is it better to add this function pointer to the tegra_xusb
> structure?
>
> Jon
>
Do you mean removing variable "original_xhci_hub_control" and save
function pointer to the tegra_xusb structure ?

But that doesn't look possible over here to point to tegra_xusb
structure and save pointer (to tegra_xhci_hc_driver.hub_control) into
it.

"
static int __init tegra_xusb_init(void)
{
xhci_init_driver(&tegra_xhci_hc_driver, &tegra_xhci_overrides);

return platform_driver_register(&tegra_xusb_driver);
}
module_init(tegra_xusb_init);
"

--nvpublic

2022-10-17 20:28:18

by Jon Hunter

[permalink] [raw]
Subject: Re: [PATCH v3] xhci: tegra: USB2 pad power controls


On 17/10/2022 10:36, Jim Lin wrote:
> On Wed, 2022-10-12 at 12:45 +0100, Jon Hunter wrote:
>> On 12/10/2022 11:25, Jim Lin wrote:
>>> Program USB2 pad PD controls during port connect/disconnect, port
>>> suspend/resume, and test mode, to reduce power consumption on
>>> disconnect or suspend.
>>>
>>> Signed-off-by: Jim Lin <[email protected]>
>>> ---
>>> v2: Fix issue that wrong tegra->phys[] may be accessed on tegra124
>>> v3: No change on copyright
>>>
>>> drivers/usb/host/xhci-tegra.c | 139
>>> +++++++++++++++++++++++++++++++++-
>>> 1 file changed, 138 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/drivers/usb/host/xhci-tegra.c b/drivers/usb/host/xhci-
>>> tegra.c
>>> index c8af2cd2216d..996182a1959f 100644
>>> --- a/drivers/usb/host/xhci-tegra.c
>>> +++ b/drivers/usb/host/xhci-tegra.c
>>> @@ -189,6 +189,13 @@ struct tegra_xusb_context_soc {
>>> } fpci;
>>> };
>>>
>>> +enum tegra_xhci_phy_type {
>>> + USB3_PHY,
>>> + USB2_PHY,
>>> + HSIC_PHY,
>>> + MAX_PHY_TYPES,
>>> +};
>>> +
>>> struct tegra_xusb_soc {
>>> const char *firmware;
>>> const char * const *supply_names;
>>> @@ -274,9 +281,17 @@ struct tegra_xusb {
>>>
>>> bool suspended;
>>> struct tegra_xusb_context context;
>>> + u32 enable_utmi_pad_after_lp0_exit;
>>> };
>>>
>>> static struct hc_driver __read_mostly tegra_xhci_hc_driver;
>>> +static int (*original_xhci_hub_control)(struct usb_hcd *hcd, u16
>>> typeReq, u16 wValue, u16 wIndex,
>>> + char *buf, u16 wLength);
>>
>> Is it better to add this function pointer to the tegra_xusb
>> structure?
>>
>> Jon
>>
> Do you mean removing variable "original_xhci_hub_control" and save
> function pointer to the tegra_xusb structure ?
>
> But that doesn't look possible over here to point to tegra_xusb
> structure and save pointer (to tegra_xhci_hc_driver.hub_control) into
> it.


Ah yes, this is in the init function and so we can't do that. Any issue
with calling xhci_hub_control() directly in the function
tegra_xhci_hub_control()?

Jon

--
nvpublic

2022-10-18 03:43:18

by Jim Lin

[permalink] [raw]
Subject: Re: [PATCH v3] xhci: tegra: USB2 pad power controls

On Mon, 2022-10-17 at 21:17 +0100, Jon Hunter wrote:
> On 17/10/2022 10:36, Jim Lin wrote:
> > On Wed, 2022-10-12 at 12:45 +0100, Jon Hunter wrote:
> > > On 12/10/2022 11:25, Jim Lin wrote:
> > > > Program USB2 pad PD controls during port connect/disconnect,
> > > > port
> > > > suspend/resume, and test mode, to reduce power consumption on
> > > > disconnect or suspend.
> > > >
> > > > Signed-off-by: Jim Lin <[email protected]>
> > > > ---
> > > > v2: Fix issue that wrong tegra->phys[] may be accessed on
> > > > tegra124
> > > > v3: No change on copyright
> > > >
> > > > drivers/usb/host/xhci-tegra.c | 139
> > > > +++++++++++++++++++++++++++++++++-
> > > > 1 file changed, 138 insertions(+), 1 deletion(-)
> > > >
> > > > diff --git a/drivers/usb/host/xhci-tegra.c
> > > > b/drivers/usb/host/xhci-
> > > > tegra.c
> > > > index c8af2cd2216d..996182a1959f 100644
> > > > --- a/drivers/usb/host/xhci-tegra.c
> > > > +++ b/drivers/usb/host/xhci-tegra.c
> > > > @@ -189,6 +189,13 @@ struct tegra_xusb_context_soc {
> > > > } fpci;
> > > > };
> > > >
> > > > +enum tegra_xhci_phy_type {
> > > > + USB3_PHY,
> > > > + USB2_PHY,
> > > > + HSIC_PHY,
> > > > + MAX_PHY_TYPES,
> > > > +};
> > > > +
> > > > struct tegra_xusb_soc {
> > > > const char *firmware;
> > > > const char * const *supply_names;
> > > > @@ -274,9 +281,17 @@ struct tegra_xusb {
> > > >
> > > > bool suspended;
> > > > struct tegra_xusb_context context;
> > > > + u32 enable_utmi_pad_after_lp0_exit;
> > > > };
> > > >
> > > > static struct hc_driver __read_mostly tegra_xhci_hc_driver;
> > > > +static int (*original_xhci_hub_control)(struct usb_hcd *hcd,
> > > > u16
> > > > typeReq, u16 wValue, u16 wIndex,
> > > > + char *buf, u16 wLength);
> > >
> > > Is it better to add this function pointer to the tegra_xusb
> > > structure?
> > >
> > > Jon
> > >
> >
> > Do you mean removing variable "original_xhci_hub_control" and save
> > function pointer to the tegra_xusb structure ?
> >
> > But that doesn't look possible over here to point to tegra_xusb
> > structure and save pointer (to tegra_xhci_hc_driver.hub_control)
> > into
> > it.
>
>
> Ah yes, this is in the init function and so we can't do that. Any
> issue
> with calling xhci_hub_control() directly in the function
> tegra_xhci_hub_control()?
>
> Jon
>
Thanks, will try.

--nvpublic