This patchset adds pinctrl support for the Qualcomm QDU1000 and QRU1000
SoCs.
The Qualcomm Technologies, Inc. Distributed Unit 1000 and Radio Unit
1000 are new SoCs meant for enabling Open RAN solutions. See more at
https://www.qualcomm.com/content/dam/qcomm-martech/dm-assets/documents/qualcomm_5g_ran_platforms_product_brief.pdf
Melody Olvera (2):
dt-bindings: pinctrl: qcom: Add QDU1000 and QRU1000 pinctrl bindings
pinctrl: qcom: Add QDU1000/QRU1000 pinctrl driver
.../pinctrl/qcom,qdu1000-pinctrl.yaml | 159 ++
drivers/pinctrl/qcom/Kconfig | 9 +
drivers/pinctrl/qcom/Makefile | 1 +
drivers/pinctrl/qcom/pinctrl-qdu1000.c | 1274 +++++++++++++++++
4 files changed, 1443 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,qdu1000-pinctrl.yaml
create mode 100644 drivers/pinctrl/qcom/pinctrl-qdu1000.c
base-commit: dca0a0385a4963145593ba417e1417af88a7c18d
--
2.38.0
Add documentation details for device tree bindings for QDU1000 and QRU1000
TLMM devices.
Signed-off-by: Melody Olvera <[email protected]>
---
.../pinctrl/qcom,qdu1000-pinctrl.yaml | 159 ++++++++++++++++++
1 file changed, 159 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,qdu1000-pinctrl.yaml
diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,qdu1000-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,qdu1000-pinctrl.yaml
new file mode 100644
index 000000000000..2ec661e5e1e0
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/qcom,qdu1000-pinctrl.yaml
@@ -0,0 +1,159 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/qcom,qdu1000-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm Technologies, Inc. QDU1000/QRU1000 TLMM block
+
+maintainers:
+ - Melody Olvera <[email protected]>
+
+description: |
+ This binding describes the Top Level Mode Multiplexer block (TLMM) found
+ in the QDU1000 and QRU1000 platforms.
+
+allOf:
+ - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
+
+properties:
+ compatible:
+ items:
+ - const: qcom,qdu1000-tlmm
+ - const: qcom,qru1000-tlmm
+
+ reg:
+ maxItems: 1
+ interrupts: true
+ interrupt-controller: true
+ "#interrupt-cells": true
+ gpio-controller: true
+
+ gpio-reserved-ranges:
+ minItems: 1
+ maxItems: 75
+
+ gpio-line-names:
+ maxItems: 150
+
+ "#gpio-cells": true
+ gpio-ranges: true
+ wakeup-parent: true
+
+patternProperties:
+ "-state$":
+ oneOf:
+ - $ref: "#/$defs/qcom-qdu1000-tlmm-state"
+ - patternProperties:
+ "-pins$":
+ $ref: "#/$defs/qcom-qdu1000-tlmm-state"
+ additionalProperties: false
+
+$defs:
+ qcom-qdu1000-tlmm-state:
+ type: object
+ description:
+ Pinctrl node's client devices use subnodes for desired pin configuration.
+ Client device subnodes use below standard properties.
+ $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
+
+ properties:
+ pins:
+ description:
+ List of gpio pins affected by the properties specified in this
+ subnode.
+ items:
+ oneOf:
+ - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-4][0-9])$"
+ - enum: [ ufs_reset, sdc2_clk, sdc2_cmd, sdc2_data ]
+ minItems: 1
+ maxItems: 36
+
+ function:
+ description:
+ Specify the alternative function to be configured for the specified
+ pins.
+ enum: [ adsp_ext, agera_pll, atest_char, atest_tsens, atest_tsens2,
+ atest_usb1, atest_usb10, atest_usb11, atest_usb12, atest_usb13,
+ atest_usb2, atest_usb20, atest_usb21, atest_usb22, atest_usb23,
+ audio_ref, btfm_slimbus, cam_mclk, cci_async, cci_i2c,
+ cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4,
+ cri_trng, cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0,
+ ddr_pxi1, ddr_pxi2, ddr_pxi3, edp_hot, edp_lcd, gcc_gp1,
+ gcc_gp2, gcc_gp3, gpio, jitter_bist, ldo_en, ldo_update,
+ lpass_slimbus, mdp_vsync, mdp_vsync0, mdp_vsync1, mdp_vsync2,
+ mdp_vsync3, mss_lte, m_voc, nav_pps, pa_indicator, pci_e0,
+ pci_e1, phase_flag, pll_bist, pll_bypassnl, pll_reset,
+ pri_mi2s, pri_mi2s_ws, prng_rosc, qdss, qdss_cti, qlink_enable,
+ qlink_request, qspi_clk, qspi_cs, qspi_data, qua_mi2s, qup0,
+ qup1, qup10, qup11, qup12, qup13, qup14, qup15, qup2, qup3,
+ qup4, qup5, qup6, qup7, qup8, qup9, qup_l4, qup_l5, qup_l6,
+ sdc4_clk, sdc4_cmd, sdc4_data, sd_write, sec_mi2s, sp_cmu,
+ spkr_i2s, ter_mi2s, tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3,
+ tsense_pwm1, tsense_pwm2, tsif1_clk, tsif1_data, tsif1_en,
+ tsif1_error, tsif1_sync, tsif2_clk, tsif2_data, tsif2_en,
+ tsif2_error, tsif2_sync, uim1_clk, uim1_data, uim1_present,
+ uim1_reset, uim2_clk, uim2_data, uim2_present, uim2_reset,
+ uim_batt, usb_phy, vfr_1, vsense_trigger, wlan1_adc0,
+ wlan1_adc1, wlan2_adc0, wlan2_adc1]
+
+ bias-disable: true
+ bias-pull-down: true
+ bias-pull-up: true
+ drive-strength: true
+ input-enable: true
+ output-high: true
+ output-low: true
+
+ required:
+ - pins
+
+ additionalProperties: false
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+
+ pinctrl@03000000 {
+ compatible = "qcom,qdu1000-pinctrl";
+ reg = <0x03000000 0xdc2000>;
+ interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ gpio-ranges = <&tlmm 0 0 151>;
+ wakeup-parent = <&pdc_intc>;
+
+ cci0-default-state {
+ pins = "gpio17", "gpio18";
+ function = "cci_i2c";
+
+ bias-pull-up;
+ drive-strength = <2>;
+ };
+
+ cam0-default-state {
+ rst-pins {
+ pins = "gpio9";
+ function = "gpio";
+
+ drive-strength = <16>;
+ bias-disable;
+ };
+
+ mclk0-pins {
+ pins = "gpio13";
+ function = "cam_mclk";
+
+ drive-strength = <16>;
+ bias-disable;
+ };
+ };
+ };
--
2.38.0
Add pin control driver for the TLMM block found in the QDU1000
and QRU1000 SoC.
Signed-off-by: Melody Olvera <[email protected]>
---
drivers/pinctrl/qcom/Kconfig | 9 +
drivers/pinctrl/qcom/Makefile | 1 +
drivers/pinctrl/qcom/pinctrl-qdu1000.c | 1274 ++++++++++++++++++++++++
3 files changed, 1284 insertions(+)
create mode 100644 drivers/pinctrl/qcom/pinctrl-qdu1000.c
diff --git a/drivers/pinctrl/qcom/Kconfig b/drivers/pinctrl/qcom/Kconfig
index 9dc2d803a586..4ab857dc2847 100644
--- a/drivers/pinctrl/qcom/Kconfig
+++ b/drivers/pinctrl/qcom/Kconfig
@@ -248,6 +248,15 @@ config PINCTRL_QCOM_SSBI_PMIC
which are using SSBI for communication with SoC. Example PMIC's
devices are pm8058 and pm8921.
+config PINCTRL_QDU1000
+ tristate "Qualcomm Tehcnologies Inc QDU1000/QRU1000 pin controller driver"
+ depends on GPIOLIB && OF
+ depends on PINCTRL_MSM
+ help
+ This is the pinctrl, pinmux, pinconf, and gpiolib driver for the
+ Qualcomm Technologies Inc TLMM block found on the Qualcomm
+ Technologies Inc QDU1000 and QRU1000 platforms.
+
config PINCTRL_SC7180
tristate "Qualcomm Technologies Inc SC7180 pin controller driver"
depends on OF
diff --git a/drivers/pinctrl/qcom/Makefile b/drivers/pinctrl/qcom/Makefile
index 8269a1db8794..da0e47b861f7 100644
--- a/drivers/pinctrl/qcom/Makefile
+++ b/drivers/pinctrl/qcom/Makefile
@@ -27,6 +27,7 @@ obj-$(CONFIG_PINCTRL_QCOM_SPMI_PMIC) += pinctrl-spmi-gpio.o
obj-$(CONFIG_PINCTRL_QCOM_SPMI_PMIC) += pinctrl-spmi-mpp.o
obj-$(CONFIG_PINCTRL_QCOM_SSBI_PMIC) += pinctrl-ssbi-gpio.o
obj-$(CONFIG_PINCTRL_QCOM_SSBI_PMIC) += pinctrl-ssbi-mpp.o
+obj-$(CONFIG_PINCTRL_QDU1000) += pinctrl-qdu1000.o
obj-$(CONFIG_PINCTRL_SC7180) += pinctrl-sc7180.o
obj-$(CONFIG_PINCTRL_SC7280) += pinctrl-sc7280.o
obj-$(CONFIG_PINCTRL_SC7280_LPASS_LPI) += pinctrl-sc7280-lpass-lpi.o
diff --git a/drivers/pinctrl/qcom/pinctrl-qdu1000.c b/drivers/pinctrl/qcom/pinctrl-qdu1000.c
new file mode 100644
index 000000000000..99ae661a3c11
--- /dev/null
+++ b/drivers/pinctrl/qcom/pinctrl-qdu1000.c
@@ -0,0 +1,1274 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * Copyright (c) 2021, The Linux Foundation. All rights reserved.
+ * Copyright (c) 2022 Qualcomm Innovation Center, Inc. All rights reserved.
+ */
+
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/pinctrl/pinctrl.h>
+
+#include "pinctrl-msm.h"
+
+#define FUNCTION(fname) \
+ [msm_mux_##fname] = { \
+ .name = #fname, \
+ .groups = fname##_groups, \
+ .ngroups = ARRAY_SIZE(fname##_groups), \
+ }
+
+#define REG_BASE 0x100000
+#define REG_SIZE 0x1000
+#define PINGROUP(id, f1, f2, f3, f4, f5, f6, f7, f8, f9) \
+ { \
+ .name = "gpio" #id, \
+ .pins = gpio##id##_pins, \
+ .npins = (unsigned int)ARRAY_SIZE(gpio##id##_pins), \
+ .funcs = (int[]){ \
+ msm_mux_gpio, /* gpio mode */ \
+ msm_mux_##f1, \
+ msm_mux_##f2, \
+ msm_mux_##f3, \
+ msm_mux_##f4, \
+ msm_mux_##f5, \
+ msm_mux_##f6, \
+ msm_mux_##f7, \
+ msm_mux_##f8, \
+ msm_mux_##f9 \
+ }, \
+ .nfuncs = 10, \
+ .ctl_reg = REG_BASE + REG_SIZE * id, \
+ .io_reg = REG_BASE + 0x4 + REG_SIZE * id, \
+ .intr_cfg_reg = REG_BASE + 0x8 + REG_SIZE * id, \
+ .intr_status_reg = REG_BASE + 0xc + REG_SIZE * id, \
+ .intr_target_reg = REG_BASE + 0x8 + REG_SIZE * id, \
+ .mux_bit = 2, \
+ .pull_bit = 0, \
+ .drv_bit = 6, \
+ .oe_bit = 9, \
+ .in_bit = 0, \
+ .out_bit = 1, \
+ .intr_enable_bit = 0, \
+ .intr_status_bit = 0, \
+ .intr_target_bit = 5, \
+ .intr_target_kpss_val = 3, \
+ .intr_raw_status_bit = 4, \
+ .intr_polarity_bit = 1, \
+ .intr_detection_bit = 2, \
+ .intr_detection_width = 2, \
+ }
+
+#define SDC_QDSD_PINGROUP(pg_name, ctl, pull, drv) \
+ { \
+ .name = #pg_name, \
+ .pins = pg_name##_pins, \
+ .npins = (unsigned int)ARRAY_SIZE(pg_name##_pins), \
+ .ctl_reg = REG_BASE + ctl, \
+ .io_reg = 0, \
+ .intr_cfg_reg = 0, \
+ .intr_status_reg = 0, \
+ .intr_target_reg = 0, \
+ .mux_bit = -1, \
+ .pull_bit = pull, \
+ .drv_bit = drv, \
+ .oe_bit = -1, \
+ .in_bit = -1, \
+ .out_bit = -1, \
+ .intr_enable_bit = -1, \
+ .intr_status_bit = -1, \
+ .intr_target_bit = -1, \
+ .intr_raw_status_bit = -1, \
+ .intr_polarity_bit = -1, \
+ .intr_detection_bit = -1, \
+ .intr_detection_width = -1, \
+ }
+
+#define UFS_RESET(pg_name, offset) \
+ { \
+ .name = #pg_name, \
+ .pins = pg_name##_pins, \
+ .npins = (unsigned int)ARRAY_SIZE(pg_name##_pins), \
+ .ctl_reg = offset, \
+ .io_reg = offset + 0x4, \
+ .intr_cfg_reg = 0, \
+ .intr_status_reg = 0, \
+ .intr_target_reg = 0, \
+ .mux_bit = -1, \
+ .pull_bit = 3, \
+ .drv_bit = 0, \
+ .oe_bit = -1, \
+ .in_bit = -1, \
+ .out_bit = 0, \
+ .intr_enable_bit = -1, \
+ .intr_status_bit = -1, \
+ .intr_target_bit = -1, \
+ .intr_raw_status_bit = -1, \
+ .intr_polarity_bit = -1, \
+ .intr_detection_bit = -1, \
+ .intr_detection_width = -1, \
+ }
+
+#define QUP_I3C(qup_mode, qup_offset) \
+ { \
+ .mode = qup_mode, \
+ .offset = qup_offset, \
+ }
+
+static const struct pinctrl_pin_desc qdu1000_pins[] = {
+ PINCTRL_PIN(0, "GPIO_0"),
+ PINCTRL_PIN(1, "GPIO_1"),
+ PINCTRL_PIN(2, "GPIO_2"),
+ PINCTRL_PIN(3, "GPIO_3"),
+ PINCTRL_PIN(4, "GPIO_4"),
+ PINCTRL_PIN(5, "GPIO_5"),
+ PINCTRL_PIN(6, "GPIO_6"),
+ PINCTRL_PIN(7, "GPIO_7"),
+ PINCTRL_PIN(8, "GPIO_8"),
+ PINCTRL_PIN(9, "GPIO_9"),
+ PINCTRL_PIN(10, "GPIO_10"),
+ PINCTRL_PIN(11, "GPIO_11"),
+ PINCTRL_PIN(12, "GPIO_12"),
+ PINCTRL_PIN(13, "GPIO_13"),
+ PINCTRL_PIN(14, "GPIO_14"),
+ PINCTRL_PIN(15, "GPIO_15"),
+ PINCTRL_PIN(16, "GPIO_16"),
+ PINCTRL_PIN(17, "GPIO_17"),
+ PINCTRL_PIN(18, "GPIO_18"),
+ PINCTRL_PIN(19, "GPIO_19"),
+ PINCTRL_PIN(20, "GPIO_20"),
+ PINCTRL_PIN(21, "GPIO_21"),
+ PINCTRL_PIN(22, "GPIO_22"),
+ PINCTRL_PIN(23, "GPIO_23"),
+ PINCTRL_PIN(24, "GPIO_24"),
+ PINCTRL_PIN(25, "GPIO_25"),
+ PINCTRL_PIN(26, "GPIO_26"),
+ PINCTRL_PIN(27, "GPIO_27"),
+ PINCTRL_PIN(28, "GPIO_28"),
+ PINCTRL_PIN(29, "GPIO_29"),
+ PINCTRL_PIN(30, "GPIO_30"),
+ PINCTRL_PIN(31, "GPIO_31"),
+ PINCTRL_PIN(32, "GPIO_32"),
+ PINCTRL_PIN(33, "GPIO_33"),
+ PINCTRL_PIN(34, "GPIO_34"),
+ PINCTRL_PIN(35, "GPIO_35"),
+ PINCTRL_PIN(36, "GPIO_36"),
+ PINCTRL_PIN(37, "GPIO_37"),
+ PINCTRL_PIN(38, "GPIO_38"),
+ PINCTRL_PIN(39, "GPIO_39"),
+ PINCTRL_PIN(40, "GPIO_40"),
+ PINCTRL_PIN(41, "GPIO_41"),
+ PINCTRL_PIN(42, "GPIO_42"),
+ PINCTRL_PIN(43, "GPIO_43"),
+ PINCTRL_PIN(44, "GPIO_44"),
+ PINCTRL_PIN(45, "GPIO_45"),
+ PINCTRL_PIN(46, "GPIO_46"),
+ PINCTRL_PIN(47, "GPIO_47"),
+ PINCTRL_PIN(48, "GPIO_48"),
+ PINCTRL_PIN(49, "GPIO_49"),
+ PINCTRL_PIN(50, "GPIO_50"),
+ PINCTRL_PIN(51, "GPIO_51"),
+ PINCTRL_PIN(52, "GPIO_52"),
+ PINCTRL_PIN(53, "GPIO_53"),
+ PINCTRL_PIN(54, "GPIO_54"),
+ PINCTRL_PIN(55, "GPIO_55"),
+ PINCTRL_PIN(56, "GPIO_56"),
+ PINCTRL_PIN(57, "GPIO_57"),
+ PINCTRL_PIN(58, "GPIO_58"),
+ PINCTRL_PIN(59, "GPIO_59"),
+ PINCTRL_PIN(60, "GPIO_60"),
+ PINCTRL_PIN(61, "GPIO_61"),
+ PINCTRL_PIN(62, "GPIO_62"),
+ PINCTRL_PIN(63, "GPIO_63"),
+ PINCTRL_PIN(64, "GPIO_64"),
+ PINCTRL_PIN(65, "GPIO_65"),
+ PINCTRL_PIN(66, "GPIO_66"),
+ PINCTRL_PIN(67, "GPIO_67"),
+ PINCTRL_PIN(68, "GPIO_68"),
+ PINCTRL_PIN(69, "GPIO_69"),
+ PINCTRL_PIN(70, "GPIO_70"),
+ PINCTRL_PIN(71, "GPIO_71"),
+ PINCTRL_PIN(72, "GPIO_72"),
+ PINCTRL_PIN(73, "GPIO_73"),
+ PINCTRL_PIN(74, "GPIO_74"),
+ PINCTRL_PIN(75, "GPIO_75"),
+ PINCTRL_PIN(76, "GPIO_76"),
+ PINCTRL_PIN(77, "GPIO_77"),
+ PINCTRL_PIN(78, "GPIO_78"),
+ PINCTRL_PIN(79, "GPIO_79"),
+ PINCTRL_PIN(80, "GPIO_80"),
+ PINCTRL_PIN(81, "GPIO_81"),
+ PINCTRL_PIN(82, "GPIO_82"),
+ PINCTRL_PIN(83, "GPIO_83"),
+ PINCTRL_PIN(84, "GPIO_84"),
+ PINCTRL_PIN(85, "GPIO_85"),
+ PINCTRL_PIN(86, "GPIO_86"),
+ PINCTRL_PIN(87, "GPIO_87"),
+ PINCTRL_PIN(88, "GPIO_88"),
+ PINCTRL_PIN(89, "GPIO_89"),
+ PINCTRL_PIN(90, "GPIO_90"),
+ PINCTRL_PIN(91, "GPIO_91"),
+ PINCTRL_PIN(92, "GPIO_92"),
+ PINCTRL_PIN(93, "GPIO_93"),
+ PINCTRL_PIN(94, "GPIO_94"),
+ PINCTRL_PIN(95, "GPIO_95"),
+ PINCTRL_PIN(96, "GPIO_96"),
+ PINCTRL_PIN(97, "GPIO_97"),
+ PINCTRL_PIN(98, "GPIO_98"),
+ PINCTRL_PIN(99, "GPIO_99"),
+ PINCTRL_PIN(100, "GPIO_100"),
+ PINCTRL_PIN(101, "GPIO_101"),
+ PINCTRL_PIN(102, "GPIO_102"),
+ PINCTRL_PIN(103, "GPIO_103"),
+ PINCTRL_PIN(104, "GPIO_104"),
+ PINCTRL_PIN(105, "GPIO_105"),
+ PINCTRL_PIN(106, "GPIO_106"),
+ PINCTRL_PIN(107, "GPIO_107"),
+ PINCTRL_PIN(108, "GPIO_108"),
+ PINCTRL_PIN(109, "GPIO_109"),
+ PINCTRL_PIN(110, "GPIO_110"),
+ PINCTRL_PIN(111, "GPIO_111"),
+ PINCTRL_PIN(112, "GPIO_112"),
+ PINCTRL_PIN(113, "GPIO_113"),
+ PINCTRL_PIN(114, "GPIO_114"),
+ PINCTRL_PIN(115, "GPIO_115"),
+ PINCTRL_PIN(116, "GPIO_116"),
+ PINCTRL_PIN(117, "GPIO_117"),
+ PINCTRL_PIN(118, "GPIO_118"),
+ PINCTRL_PIN(119, "GPIO_119"),
+ PINCTRL_PIN(120, "GPIO_120"),
+ PINCTRL_PIN(121, "GPIO_121"),
+ PINCTRL_PIN(122, "GPIO_122"),
+ PINCTRL_PIN(123, "GPIO_123"),
+ PINCTRL_PIN(124, "GPIO_124"),
+ PINCTRL_PIN(125, "GPIO_125"),
+ PINCTRL_PIN(126, "GPIO_126"),
+ PINCTRL_PIN(127, "GPIO_127"),
+ PINCTRL_PIN(128, "GPIO_128"),
+ PINCTRL_PIN(129, "GPIO_129"),
+ PINCTRL_PIN(130, "GPIO_130"),
+ PINCTRL_PIN(131, "GPIO_131"),
+ PINCTRL_PIN(132, "GPIO_132"),
+ PINCTRL_PIN(133, "GPIO_133"),
+ PINCTRL_PIN(134, "GPIO_134"),
+ PINCTRL_PIN(135, "GPIO_135"),
+ PINCTRL_PIN(136, "GPIO_136"),
+ PINCTRL_PIN(137, "GPIO_137"),
+ PINCTRL_PIN(138, "GPIO_138"),
+ PINCTRL_PIN(139, "GPIO_139"),
+ PINCTRL_PIN(140, "GPIO_140"),
+ PINCTRL_PIN(141, "GPIO_141"),
+ PINCTRL_PIN(142, "GPIO_142"),
+ PINCTRL_PIN(143, "GPIO_143"),
+ PINCTRL_PIN(144, "GPIO_144"),
+ PINCTRL_PIN(145, "GPIO_145"),
+ PINCTRL_PIN(146, "GPIO_146"),
+ PINCTRL_PIN(147, "GPIO_147"),
+ PINCTRL_PIN(148, "GPIO_148"),
+ PINCTRL_PIN(149, "GPIO_149"),
+ PINCTRL_PIN(150, "GPIO_150"),
+ PINCTRL_PIN(151, "SDC1_RCLK"),
+ PINCTRL_PIN(152, "SDC1_CLK"),
+ PINCTRL_PIN(153, "SDC1_CMD"),
+ PINCTRL_PIN(154, "SDC1_DATA"),
+};
+
+#define DECLARE_MSM_GPIO_PINS(pin) \
+ static const unsigned int gpio##pin##_pins[] = { pin }
+DECLARE_MSM_GPIO_PINS(0);
+DECLARE_MSM_GPIO_PINS(1);
+DECLARE_MSM_GPIO_PINS(2);
+DECLARE_MSM_GPIO_PINS(3);
+DECLARE_MSM_GPIO_PINS(4);
+DECLARE_MSM_GPIO_PINS(5);
+DECLARE_MSM_GPIO_PINS(6);
+DECLARE_MSM_GPIO_PINS(7);
+DECLARE_MSM_GPIO_PINS(8);
+DECLARE_MSM_GPIO_PINS(9);
+DECLARE_MSM_GPIO_PINS(10);
+DECLARE_MSM_GPIO_PINS(11);
+DECLARE_MSM_GPIO_PINS(12);
+DECLARE_MSM_GPIO_PINS(13);
+DECLARE_MSM_GPIO_PINS(14);
+DECLARE_MSM_GPIO_PINS(15);
+DECLARE_MSM_GPIO_PINS(16);
+DECLARE_MSM_GPIO_PINS(17);
+DECLARE_MSM_GPIO_PINS(18);
+DECLARE_MSM_GPIO_PINS(19);
+DECLARE_MSM_GPIO_PINS(20);
+DECLARE_MSM_GPIO_PINS(21);
+DECLARE_MSM_GPIO_PINS(22);
+DECLARE_MSM_GPIO_PINS(23);
+DECLARE_MSM_GPIO_PINS(24);
+DECLARE_MSM_GPIO_PINS(25);
+DECLARE_MSM_GPIO_PINS(26);
+DECLARE_MSM_GPIO_PINS(27);
+DECLARE_MSM_GPIO_PINS(28);
+DECLARE_MSM_GPIO_PINS(29);
+DECLARE_MSM_GPIO_PINS(30);
+DECLARE_MSM_GPIO_PINS(31);
+DECLARE_MSM_GPIO_PINS(32);
+DECLARE_MSM_GPIO_PINS(33);
+DECLARE_MSM_GPIO_PINS(34);
+DECLARE_MSM_GPIO_PINS(35);
+DECLARE_MSM_GPIO_PINS(36);
+DECLARE_MSM_GPIO_PINS(37);
+DECLARE_MSM_GPIO_PINS(38);
+DECLARE_MSM_GPIO_PINS(39);
+DECLARE_MSM_GPIO_PINS(40);
+DECLARE_MSM_GPIO_PINS(41);
+DECLARE_MSM_GPIO_PINS(42);
+DECLARE_MSM_GPIO_PINS(43);
+DECLARE_MSM_GPIO_PINS(44);
+DECLARE_MSM_GPIO_PINS(45);
+DECLARE_MSM_GPIO_PINS(46);
+DECLARE_MSM_GPIO_PINS(47);
+DECLARE_MSM_GPIO_PINS(48);
+DECLARE_MSM_GPIO_PINS(49);
+DECLARE_MSM_GPIO_PINS(50);
+DECLARE_MSM_GPIO_PINS(51);
+DECLARE_MSM_GPIO_PINS(52);
+DECLARE_MSM_GPIO_PINS(53);
+DECLARE_MSM_GPIO_PINS(54);
+DECLARE_MSM_GPIO_PINS(55);
+DECLARE_MSM_GPIO_PINS(56);
+DECLARE_MSM_GPIO_PINS(57);
+DECLARE_MSM_GPIO_PINS(58);
+DECLARE_MSM_GPIO_PINS(59);
+DECLARE_MSM_GPIO_PINS(60);
+DECLARE_MSM_GPIO_PINS(61);
+DECLARE_MSM_GPIO_PINS(62);
+DECLARE_MSM_GPIO_PINS(63);
+DECLARE_MSM_GPIO_PINS(64);
+DECLARE_MSM_GPIO_PINS(65);
+DECLARE_MSM_GPIO_PINS(66);
+DECLARE_MSM_GPIO_PINS(67);
+DECLARE_MSM_GPIO_PINS(68);
+DECLARE_MSM_GPIO_PINS(69);
+DECLARE_MSM_GPIO_PINS(70);
+DECLARE_MSM_GPIO_PINS(71);
+DECLARE_MSM_GPIO_PINS(72);
+DECLARE_MSM_GPIO_PINS(73);
+DECLARE_MSM_GPIO_PINS(74);
+DECLARE_MSM_GPIO_PINS(75);
+DECLARE_MSM_GPIO_PINS(76);
+DECLARE_MSM_GPIO_PINS(77);
+DECLARE_MSM_GPIO_PINS(78);
+DECLARE_MSM_GPIO_PINS(79);
+DECLARE_MSM_GPIO_PINS(80);
+DECLARE_MSM_GPIO_PINS(81);
+DECLARE_MSM_GPIO_PINS(82);
+DECLARE_MSM_GPIO_PINS(83);
+DECLARE_MSM_GPIO_PINS(84);
+DECLARE_MSM_GPIO_PINS(85);
+DECLARE_MSM_GPIO_PINS(86);
+DECLARE_MSM_GPIO_PINS(87);
+DECLARE_MSM_GPIO_PINS(88);
+DECLARE_MSM_GPIO_PINS(89);
+DECLARE_MSM_GPIO_PINS(90);
+DECLARE_MSM_GPIO_PINS(91);
+DECLARE_MSM_GPIO_PINS(92);
+DECLARE_MSM_GPIO_PINS(93);
+DECLARE_MSM_GPIO_PINS(94);
+DECLARE_MSM_GPIO_PINS(95);
+DECLARE_MSM_GPIO_PINS(96);
+DECLARE_MSM_GPIO_PINS(97);
+DECLARE_MSM_GPIO_PINS(98);
+DECLARE_MSM_GPIO_PINS(99);
+DECLARE_MSM_GPIO_PINS(100);
+DECLARE_MSM_GPIO_PINS(101);
+DECLARE_MSM_GPIO_PINS(102);
+DECLARE_MSM_GPIO_PINS(103);
+DECLARE_MSM_GPIO_PINS(104);
+DECLARE_MSM_GPIO_PINS(105);
+DECLARE_MSM_GPIO_PINS(106);
+DECLARE_MSM_GPIO_PINS(107);
+DECLARE_MSM_GPIO_PINS(108);
+DECLARE_MSM_GPIO_PINS(109);
+DECLARE_MSM_GPIO_PINS(110);
+DECLARE_MSM_GPIO_PINS(111);
+DECLARE_MSM_GPIO_PINS(112);
+DECLARE_MSM_GPIO_PINS(113);
+DECLARE_MSM_GPIO_PINS(114);
+DECLARE_MSM_GPIO_PINS(115);
+DECLARE_MSM_GPIO_PINS(116);
+DECLARE_MSM_GPIO_PINS(117);
+DECLARE_MSM_GPIO_PINS(118);
+DECLARE_MSM_GPIO_PINS(119);
+DECLARE_MSM_GPIO_PINS(120);
+DECLARE_MSM_GPIO_PINS(121);
+DECLARE_MSM_GPIO_PINS(122);
+DECLARE_MSM_GPIO_PINS(123);
+DECLARE_MSM_GPIO_PINS(124);
+DECLARE_MSM_GPIO_PINS(125);
+DECLARE_MSM_GPIO_PINS(126);
+DECLARE_MSM_GPIO_PINS(127);
+DECLARE_MSM_GPIO_PINS(128);
+DECLARE_MSM_GPIO_PINS(129);
+DECLARE_MSM_GPIO_PINS(130);
+DECLARE_MSM_GPIO_PINS(131);
+DECLARE_MSM_GPIO_PINS(132);
+DECLARE_MSM_GPIO_PINS(133);
+DECLARE_MSM_GPIO_PINS(134);
+DECLARE_MSM_GPIO_PINS(135);
+DECLARE_MSM_GPIO_PINS(136);
+DECLARE_MSM_GPIO_PINS(137);
+DECLARE_MSM_GPIO_PINS(138);
+DECLARE_MSM_GPIO_PINS(139);
+DECLARE_MSM_GPIO_PINS(140);
+DECLARE_MSM_GPIO_PINS(141);
+DECLARE_MSM_GPIO_PINS(142);
+DECLARE_MSM_GPIO_PINS(143);
+DECLARE_MSM_GPIO_PINS(144);
+DECLARE_MSM_GPIO_PINS(145);
+DECLARE_MSM_GPIO_PINS(146);
+DECLARE_MSM_GPIO_PINS(147);
+DECLARE_MSM_GPIO_PINS(148);
+DECLARE_MSM_GPIO_PINS(149);
+DECLARE_MSM_GPIO_PINS(150);
+
+static const unsigned int sdc1_rclk_pins[] = { 151 };
+static const unsigned int sdc1_clk_pins[] = { 152 };
+static const unsigned int sdc1_cmd_pins[] = { 153 };
+static const unsigned int sdc1_data_pins[] = { 154 };
+
+enum qdu1000_functions {
+ msm_mux_gpio,
+ msm_mux_CMO_PRI,
+ msm_mux_SI5518_INT,
+ msm_mux_atest_char,
+ msm_mux_atest_usb,
+ msm_mux_char_exec,
+ msm_mux_cmu_rng,
+ msm_mux_dbg_out_clk,
+ msm_mux_ddr_bist,
+ msm_mux_ddr_pxi0,
+ msm_mux_ddr_pxi1,
+ msm_mux_ddr_pxi2,
+ msm_mux_ddr_pxi3,
+ msm_mux_ddr_pxi4,
+ msm_mux_ddr_pxi5,
+ msm_mux_ddr_pxi6,
+ msm_mux_ddr_pxi7,
+ msm_mux_eth012_int_n,
+ msm_mux_eth345_int_n,
+ msm_mux_eth6_int_n,
+ msm_mux_gcc_gp1,
+ msm_mux_gcc_gp2,
+ msm_mux_gcc_gp3,
+ msm_mux_gps_pps_in,
+ msm_mux_hardsync_pps_in,
+ msm_mux_intr_c,
+ msm_mux_jitter_bist_ref,
+ msm_mux_pcie_clkreqn,
+ msm_mux_phase_flag,
+ msm_mux_pll_bist,
+ msm_mux_pll_clk,
+ msm_mux_prng_rosc,
+ msm_mux_qdss_cti,
+ msm_mux_qdss_gpio,
+ msm_mux_qlink0_enable,
+ msm_mux_qlink0_request,
+ msm_mux_qlink0_wmss,
+ msm_mux_qlink1_enable,
+ msm_mux_qlink1_request,
+ msm_mux_qlink1_wmss,
+ msm_mux_qlink2_enable,
+ msm_mux_qlink2_request,
+ msm_mux_qlink2_wmss,
+ msm_mux_qlink3_enable,
+ msm_mux_qlink3_request,
+ msm_mux_qlink3_wmss,
+ msm_mux_qlink4_enable,
+ msm_mux_qlink4_request,
+ msm_mux_qlink4_wmss,
+ msm_mux_qlink5_enable,
+ msm_mux_qlink5_request,
+ msm_mux_qlink5_wmss,
+ msm_mux_qlink6_enable,
+ msm_mux_qlink6_request,
+ msm_mux_qlink6_wmss,
+ msm_mux_qlink7_enable,
+ msm_mux_qlink7_request,
+ msm_mux_qlink7_wmss,
+ msm_mux_qspi_clk,
+ msm_mux_qspi_cs,
+ msm_mux_qspi0,
+ msm_mux_qspi1,
+ msm_mux_qspi2,
+ msm_mux_qspi3,
+ msm_mux_qup00,
+ msm_mux_qup01,
+ msm_mux_qup02,
+ msm_mux_qup03,
+ msm_mux_qup04,
+ msm_mux_qup05,
+ msm_mux_qup06,
+ msm_mux_qup07,
+ msm_mux_qup08,
+ msm_mux_qup10,
+ msm_mux_qup11,
+ msm_mux_qup12,
+ msm_mux_qup13,
+ msm_mux_qup14,
+ msm_mux_qup15,
+ msm_mux_qup16,
+ msm_mux_qup17,
+ msm_mux_qup20,
+ msm_mux_qup21,
+ msm_mux_qup22,
+ msm_mux_smb_alert,
+ msm_mux_smb_clk,
+ msm_mux_smb_dat,
+ msm_mux_tb_trig,
+ msm_mux_tgu_ch0,
+ msm_mux_tgu_ch1,
+ msm_mux_tgu_ch2,
+ msm_mux_tgu_ch3,
+ msm_mux_tgu_ch4,
+ msm_mux_tgu_ch5,
+ msm_mux_tgu_ch6,
+ msm_mux_tgu_ch7,
+ msm_mux_tmess_prng0,
+ msm_mux_tmess_prng1,
+ msm_mux_tmess_prng2,
+ msm_mux_tmess_prng3,
+ msm_mux_tod_pps_in,
+ msm_mux_tsense_pwm1,
+ msm_mux_tsense_pwm2,
+ msm_mux_usb2phy_ac,
+ msm_mux_usb_con_det,
+ msm_mux_usb_dfp_en,
+ msm_mux_usb_phy,
+ msm_mux_vfr_0,
+ msm_mux_vfr_1,
+ msm_mux_vsense_trigger,
+ msm_mux__,
+};
+
+static const char * const gpio_groups[] = {
+ "gpio0", "gpio1", "gpio2", "gpio3", "gpio4", "gpio5", "gpio6", "gpio7",
+ "gpio8", "gpio9", "gpio10", "gpio11", "gpio12", "gpio13", "gpio14",
+ "gpio15", "gpio16", "gpio17", "gpio18", "gpio19", "gpio20", "gpio21",
+ "gpio22", "gpio23", "gpio24", "gpio25", "gpio26", "gpio27", "gpio28",
+ "gpio29", "gpio30", "gpio31", "gpio32", "gpio33", "gpio34", "gpio35",
+ "gpio36", "gpio37", "gpio38", "gpio39", "gpio40", "gpio41", "gpio42",
+ "gpio43", "gpio44", "gpio45", "gpio46", "gpio47", "gpio48", "gpio49",
+ "gpio50", "gpio51", "gpio52", "gpio53", "gpio54", "gpio55", "gpio56",
+ "gpio57", "gpio58", "gpio59", "gpio60", "gpio61", "gpio62", "gpio63",
+ "gpio64", "gpio65", "gpio66", "gpio67", "gpio68", "gpio69", "gpio70",
+ "gpio71", "gpio72", "gpio73", "gpio74", "gpio75", "gpio76", "gpio77",
+ "gpio78", "gpio79", "gpio80", "gpio81", "gpio82", "gpio83", "gpio84",
+ "gpio85", "gpio86", "gpio87", "gpio88", "gpio89", "gpio90", "gpio91",
+ "gpio92", "gpio93", "gpio94", "gpio95", "gpio96", "gpio97", "gpio98",
+ "gpio99", "gpio100", "gpio101", "gpio102", "gpio103", "gpio104",
+ "gpio105", "gpio106", "gpio107", "gpio108", "gpio109", "gpio110",
+ "gpio111", "gpio112", "gpio113", "gpio114", "gpio115", "gpio116",
+ "gpio117", "gpio118", "gpio119", "gpio120", "gpio121", "gpio122",
+ "gpio123", "gpio124", "gpio125", "gpio126", "gpio127", "gpio128",
+ "gpio129", "gpio130", "gpio131", "gpio132", "gpio133", "gpio134",
+ "gpio135", "gpio136", "gpio137", "gpio138", "gpio139", "gpio140",
+ "gpio141", "gpio142", "gpio143", "gpio144", "gpio145", "gpio146",
+ "gpio147", "gpio148", "gpio149", "gpio150",
+};
+static const char * const CMO_PRI_groups[] = {
+ "gpio103",
+};
+static const char * const SI5518_INT_groups[] = {
+ "gpio44",
+};
+static const char * const atest_char_groups[] = {
+ "gpio89", "gpio90", "gpio91", "gpio92", "gpio95",
+};
+static const char * const atest_usb_groups[] = {
+ "gpio114", "gpio115", "gpio116", "gpio117", "gpio118",
+};
+static const char * const char_exec_groups[] = {
+ "gpio99", "gpio100",
+};
+static const char * const cmu_rng_groups[] = {
+ "gpio89", "gpio90", "gpio91", "gpio92",
+};
+static const char * const dbg_out_clk_groups[] = {
+ "gpio136",
+};
+static const char * const ddr_bist_groups[] = {
+ "gpio0", "gpio1", "gpio2", "gpio3",
+};
+static const char * const ddr_pxi0_groups[] = {
+ "gpio114", "gpio115",
+};
+static const char * const ddr_pxi1_groups[] = {
+ "gpio116", "gpio117",
+};
+static const char * const ddr_pxi2_groups[] = {
+ "gpio118", "gpio119",
+};
+static const char * const ddr_pxi3_groups[] = {
+ "gpio120", "gpio121",
+};
+static const char * const ddr_pxi4_groups[] = {
+ "gpio122", "gpio123",
+};
+static const char * const ddr_pxi5_groups[] = {
+ "gpio124", "gpio125",
+};
+static const char * const ddr_pxi6_groups[] = {
+ "gpio126", "gpio127",
+};
+static const char * const ddr_pxi7_groups[] = {
+ "gpio128", "gpio129",
+};
+static const char * const eth012_int_n_groups[] = {
+ "gpio86",
+};
+static const char * const eth345_int_n_groups[] = {
+ "gpio87",
+};
+static const char * const eth6_int_n_groups[] = {
+ "gpio88",
+};
+static const char * const gcc_gp1_groups[] = {
+ "gpio86", "gpio134",
+};
+static const char * const gcc_gp2_groups[] = {
+ "gpio87", "gpio135",
+};
+static const char * const gcc_gp3_groups[] = {
+ "gpio88", "gpio136",
+};
+static const char * const gps_pps_in_groups[] = {
+ "gpio49",
+};
+static const char * const hardsync_pps_in_groups[] = {
+ "gpio47",
+};
+static const char * const intr_c_groups[] = {
+ "gpio26", "gpio27", "gpio28", "gpio141", "gpio142", "gpio143",
+};
+static const char * const jitter_bist_ref_groups[] = {
+ "gpio130",
+};
+static const char * const pcie_clkreqn_groups[] = {
+ "gpio98", "gpio99", "gpio100",
+};
+static const char * const phase_flag_groups[] = {
+ "gpio6", "gpio7", "gpio8", "gpio9", "gpio16", "gpio17", "gpio18",
+ "gpio19", "gpio20", "gpio22", "gpio21", "gpio23", "gpio24", "gpio25",
+ "gpio26", "gpio27", "gpio28", "gpio29", "gpio30", "gpio31", "gpio32",
+ "gpio33", "gpio42", "gpio43", "gpio89", "gpio90", "gpio91", "gpio92",
+ "gpio95", "gpio96", "gpio97", "gpio102",
+};
+static const char * const pll_bist_groups[] = {
+ "gpio20",
+};
+static const char * const pll_clk_groups[] = {
+ "gpio98",
+};
+static const char * const prng_rosc_groups[] = {
+ "gpio18", "gpio19", "gpio20", "gpio21",
+};
+static const char * const qdss_cti_groups[] = {
+ "gpio36", "gpio37", "gpio38", "gpio39", "gpio40", "gpio41", "gpio48",
+ "gpio49", "gpio86", "gpio87", "gpio93", "gpio94", "gpio130", "gpio131",
+ "gpio132", "gpio133", "gpio134", "gpio135", "gpio144", "gpio145",
+};
+static const char * const qdss_gpio_groups[] = {
+ "gpio6", "gpio7", "gpio8", "gpio9", "gpio16", "gpio17", "gpio18",
+ "gpio19", "gpio20", "gpio21", "gpio22", "gpio23", "gpio25", "gpio26",
+ "gpio27", "gpio28", "gpio24", "gpio29", "gpio30", "gpio31", "gpio32",
+ "gpio33", "gpio34", "gpio35", "gpio42", "gpio43", "gpio88", "gpio89",
+ "gpio90", "gpio91", "gpio92", "gpio95", "gpio96", "gpio97", "gpio102",
+ "gpio103",
+};
+static const char * const qlink0_enable_groups[] = {
+ "gpio67",
+};
+static const char * const qlink0_request_groups[] = {
+ "gpio66",
+};
+static const char * const qlink0_wmss_groups[] = {
+ "gpio82",
+};
+static const char * const qlink1_enable_groups[] = {
+ "gpio69",
+};
+static const char * const qlink1_request_groups[] = {
+ "gpio68",
+};
+static const char * const qlink1_wmss_groups[] = {
+ "gpio83",
+};
+static const char * const qlink2_enable_groups[] = {
+ "gpio71",
+};
+static const char * const qlink2_request_groups[] = {
+ "gpio70",
+};
+static const char * const qlink2_wmss_groups[] = {
+ "gpio138",
+};
+static const char * const qlink3_enable_groups[] = {
+ "gpio73",
+};
+static const char * const qlink3_request_groups[] = {
+ "gpio72",
+};
+static const char * const qlink3_wmss_groups[] = {
+ "gpio139",
+};
+static const char * const qlink4_enable_groups[] = {
+ "gpio75",
+};
+static const char * const qlink4_request_groups[] = {
+ "gpio74",
+};
+static const char * const qlink4_wmss_groups[] = {
+ "gpio84",
+};
+static const char * const qlink5_enable_groups[] = {
+ "gpio77",
+};
+static const char * const qlink5_request_groups[] = {
+ "gpio76",
+};
+static const char * const qlink5_wmss_groups[] = {
+ "gpio85",
+};
+static const char * const qlink6_enable_groups[] = {
+ "gpio79",
+};
+static const char * const qlink6_request_groups[] = {
+ "gpio78",
+};
+static const char * const qlink6_wmss_groups[] = {
+ "gpio56",
+};
+static const char * const qlink7_enable_groups[] = {
+ "gpio81",
+};
+static const char * const qlink7_request_groups[] = {
+ "gpio80",
+};
+static const char * const qlink7_wmss_groups[] = {
+ "gpio57",
+};
+static const char * const qspi0_groups[] = {
+ "gpio114",
+};
+static const char * const qspi1_groups[] = {
+ "gpio115",
+};
+static const char * const qspi2_groups[] = {
+ "gpio116",
+};
+static const char * const qspi3_groups[] = {
+ "gpio117",
+};
+static const char * const qspi_clk_groups[] = {
+ "gpio126",
+};
+static const char * const qspi_cs_groups[] = {
+ "gpio125",
+};
+static const char * const qup00_groups[] = {
+ "gpio6", "gpio7", "gpio8", "gpio9",
+};
+static const char * const qup01_groups[] = {
+ "gpio10", "gpio11", "gpio12", "gpio13",
+};
+static const char * const qup02_groups[] = {
+ "gpio10", "gpio11", "gpio12", "gpio13",
+};
+static const char * const qup03_groups[] = {
+ "gpio14", "gpio15", "gpio16", "gpio17",
+};
+static const char * const qup04_groups[] = {
+ "gpio14", "gpio15", "gpio16", "gpio17",
+};
+static const char * const qup05_groups[] = {
+ "gpio130", "gpio131", "gpio132", "gpio133",
+};
+static const char * const qup06_groups[] = {
+ "gpio130", "gpio131", "gpio132", "gpio133",
+};
+static const char * const qup07_groups[] = {
+ "gpio134", "gpio135",
+};
+static const char * const qup08_groups[] = {
+ "gpio134", "gpio135",
+};
+static const char * const qup10_groups[] = {
+ "gpio18", "gpio19", "gpio20", "gpio21",
+};
+static const char * const qup11_groups[] = {
+ "gpio22", "gpio23", "gpio24", "gpio25",
+};
+static const char * const qup12_groups[] = {
+ "gpio22", "gpio23", "gpio24", "gpio25",
+};
+static const char * const qup13_groups[] = {
+ "gpio26", "gpio27", "gpio28", "gpio29",
+};
+static const char * const qup14_groups[] = {
+ "gpio26", "gpio27", "gpio28", "gpio29",
+};
+static const char * const qup15_groups[] = {
+ "gpio30", "gpio31", "gpio32", "gpio33",
+};
+static const char * const qup16_groups[] = {
+ "gpio29", "gpio34", "gpio35", "gpio36", "gpio37", "gpio38", "gpio39",
+};
+static const char * const qup17_groups[] = {
+ "gpio12", "gpio13", "gpio14", "gpio30", "gpio31", "gpio40", "gpio41",
+};
+static const char * const qup20_groups[] = {
+ "gpio0", "gpio1", "gpio2", "gpio3",
+};
+static const char * const qup21_groups[] = {
+ "gpio0", "gpio1", "gpio2", "gpio3",
+};
+static const char * const qup22_groups[] = {
+ "gpio4", "gpio5", "gpio128", "gpio129",
+};
+static const char * const smb_alert_groups[] = {
+ "gpio88", "gpio101",
+};
+static const char * const smb_clk_groups[] = {
+ "gpio133",
+};
+static const char * const smb_dat_groups[] = {
+ "gpio132",
+};
+static const char * const tb_trig_groups[] = {
+ "gpio114",
+};
+static const char * const tgu_ch0_groups[] = {
+ "gpio6",
+};
+static const char * const tgu_ch1_groups[] = {
+ "gpio7",
+};
+static const char * const tgu_ch2_groups[] = {
+ "gpio8",
+};
+static const char * const tgu_ch3_groups[] = {
+ "gpio9",
+};
+static const char * const tgu_ch4_groups[] = {
+ "gpio44",
+};
+static const char * const tgu_ch5_groups[] = {
+ "gpio45",
+};
+static const char * const tgu_ch6_groups[] = {
+ "gpio46",
+};
+static const char * const tgu_ch7_groups[] = {
+ "gpio47",
+};
+static const char * const tmess_prng0_groups[] = {
+ "gpio33",
+};
+static const char * const tmess_prng1_groups[] = {
+ "gpio32",
+};
+static const char * const tmess_prng2_groups[] = {
+ "gpio31",
+};
+static const char * const tmess_prng3_groups[] = {
+ "gpio30",
+};
+static const char * const tod_pps_in_groups[] = {
+ "gpio48",
+};
+static const char * const tsense_pwm1_groups[] = {
+ "gpio2",
+};
+static const char * const tsense_pwm2_groups[] = {
+ "gpio3",
+};
+static const char * const usb2phy_ac_groups[] = {
+ "gpio90",
+};
+static const char * const usb_con_det_groups[] = {
+ "gpio42",
+};
+static const char * const usb_dfp_en_groups[] = {
+ "gpio43",
+};
+static const char * const usb_phy_groups[] = {
+ "gpio91",
+};
+static const char * const vfr_0_groups[] = {
+ "gpio93",
+};
+static const char * const vfr_1_groups[] = {
+ "gpio94",
+};
+static const char * const vsense_trigger_groups[] = {
+ "gpio135",
+};
+
+static const struct msm_function qdu1000_functions[] = {
+ FUNCTION(gpio),
+ FUNCTION(CMO_PRI),
+ FUNCTION(SI5518_INT),
+ FUNCTION(atest_char),
+ FUNCTION(atest_usb),
+ FUNCTION(char_exec),
+ FUNCTION(cmu_rng),
+ FUNCTION(dbg_out_clk),
+ FUNCTION(ddr_bist),
+ FUNCTION(ddr_pxi0),
+ FUNCTION(ddr_pxi1),
+ FUNCTION(ddr_pxi2),
+ FUNCTION(ddr_pxi3),
+ FUNCTION(ddr_pxi4),
+ FUNCTION(ddr_pxi5),
+ FUNCTION(ddr_pxi6),
+ FUNCTION(ddr_pxi7),
+ FUNCTION(eth012_int_n),
+ FUNCTION(eth345_int_n),
+ FUNCTION(eth6_int_n),
+ FUNCTION(gcc_gp1),
+ FUNCTION(gcc_gp2),
+ FUNCTION(gcc_gp3),
+ FUNCTION(gps_pps_in),
+ FUNCTION(hardsync_pps_in),
+ FUNCTION(intr_c),
+ FUNCTION(jitter_bist_ref),
+ FUNCTION(pcie_clkreqn),
+ FUNCTION(phase_flag),
+ FUNCTION(pll_bist),
+ FUNCTION(pll_clk),
+ FUNCTION(prng_rosc),
+ FUNCTION(qdss_cti),
+ FUNCTION(qdss_gpio),
+ FUNCTION(qlink0_enable),
+ FUNCTION(qlink0_request),
+ FUNCTION(qlink0_wmss),
+ FUNCTION(qlink1_enable),
+ FUNCTION(qlink1_request),
+ FUNCTION(qlink1_wmss),
+ FUNCTION(qlink2_enable),
+ FUNCTION(qlink2_request),
+ FUNCTION(qlink2_wmss),
+ FUNCTION(qlink3_enable),
+ FUNCTION(qlink3_request),
+ FUNCTION(qlink3_wmss),
+ FUNCTION(qlink4_enable),
+ FUNCTION(qlink4_request),
+ FUNCTION(qlink4_wmss),
+ FUNCTION(qlink5_enable),
+ FUNCTION(qlink5_request),
+ FUNCTION(qlink5_wmss),
+ FUNCTION(qlink6_enable),
+ FUNCTION(qlink6_request),
+ FUNCTION(qlink6_wmss),
+ FUNCTION(qlink7_enable),
+ FUNCTION(qlink7_request),
+ FUNCTION(qlink7_wmss),
+ FUNCTION(qspi0),
+ FUNCTION(qspi1),
+ FUNCTION(qspi2),
+ FUNCTION(qspi3),
+ FUNCTION(qspi_clk),
+ FUNCTION(qspi_cs),
+ FUNCTION(qup00),
+ FUNCTION(qup01),
+ FUNCTION(qup02),
+ FUNCTION(qup03),
+ FUNCTION(qup04),
+ FUNCTION(qup05),
+ FUNCTION(qup06),
+ FUNCTION(qup07),
+ FUNCTION(qup08),
+ FUNCTION(qup10),
+ FUNCTION(qup11),
+ FUNCTION(qup12),
+ FUNCTION(qup13),
+ FUNCTION(qup14),
+ FUNCTION(qup15),
+ FUNCTION(qup16),
+ FUNCTION(qup17),
+ FUNCTION(qup20),
+ FUNCTION(qup21),
+ FUNCTION(qup22),
+ FUNCTION(smb_alert),
+ FUNCTION(smb_clk),
+ FUNCTION(smb_dat),
+ FUNCTION(tb_trig),
+ FUNCTION(tgu_ch0),
+ FUNCTION(tgu_ch1),
+ FUNCTION(tgu_ch2),
+ FUNCTION(tgu_ch3),
+ FUNCTION(tgu_ch4),
+ FUNCTION(tgu_ch5),
+ FUNCTION(tgu_ch6),
+ FUNCTION(tgu_ch7),
+ FUNCTION(tmess_prng0),
+ FUNCTION(tmess_prng1),
+ FUNCTION(tmess_prng2),
+ FUNCTION(tmess_prng3),
+ FUNCTION(tod_pps_in),
+ FUNCTION(tsense_pwm1),
+ FUNCTION(tsense_pwm2),
+ FUNCTION(usb2phy_ac),
+ FUNCTION(usb_con_det),
+ FUNCTION(usb_dfp_en),
+ FUNCTION(usb_phy),
+ FUNCTION(vfr_0),
+ FUNCTION(vfr_1),
+ FUNCTION(vsense_trigger),
+};
+
+/* Every pin is maintained as a single group, and missing or non-existing pin
+ * would be maintained as dummy group to synchronize pin group index with
+ * pin descriptor registered with pinctrl core.
+ * Clients would not be able to request these dummy pin groups.
+ */
+static const struct msm_pingroup qdu1000_groups[] = {
+ [0] = PINGROUP(0, qup20, qup21, ddr_bist, _, _, _, _, _, _),
+ [1] = PINGROUP(1, qup20, qup21, ddr_bist, _, _, _, _, _, _),
+ [2] = PINGROUP(2, qup21, qup20, ddr_bist, _,
+ tsense_pwm1, _, _, _, _),
+ [3] = PINGROUP(3, qup21, qup20, ddr_bist, _,
+ tsense_pwm2, _, _, _, _),
+ [4] = PINGROUP(4, qup22, _, _, _, _, _, _, _, _),
+ [5] = PINGROUP(5, qup22, _, _, _, _, _, _, _, _),
+ [6] = PINGROUP(6, qup00, tgu_ch0, phase_flag, _,
+ qdss_gpio, _, _, _, _),
+ [7] = PINGROUP(7, qup00, tgu_ch1, phase_flag, _,
+ qdss_gpio, _, _, _, _),
+ [8] = PINGROUP(8, qup00, tgu_ch2, phase_flag, _,
+ qdss_gpio, _, _, _, _),
+ [9] = PINGROUP(9, qup00, tgu_ch3, phase_flag, _,
+ qdss_gpio, _, _, _, _),
+ [10] = PINGROUP(10, qup01, qup02, _, _, _, _, _, _, _),
+ [11] = PINGROUP(11, qup01, qup02, _, _, _, _, _, _, _),
+ [12] = PINGROUP(12, qup02, qup01, qup17, _, _, _, _, _, _),
+ [13] = PINGROUP(13, qup02, qup01, qup17, _, _, _, _, _, _),
+ [14] = PINGROUP(14, qup03, qup04, qup17, _, _, _, _, _, _),
+ [15] = PINGROUP(15, qup03, qup04, _, _, _, _, _, _, _),
+ [16] = PINGROUP(16, qup04, qup03, phase_flag, _,
+ qdss_gpio, _, _, _, _),
+ [17] = PINGROUP(17, qup04, qup03, phase_flag, _,
+ qdss_gpio, _, _, _, _),
+ [18] = PINGROUP(18, qup10, prng_rosc, phase_flag,
+ _, qdss_gpio, _, _, _, _),
+ [19] = PINGROUP(19, qup10, prng_rosc, phase_flag,
+ _, qdss_gpio, _, _, _, _),
+ [20] = PINGROUP(20, qup10, prng_rosc, pll_bist,
+ phase_flag, _, qdss_gpio, _, _, _),
+ [21] = PINGROUP(21, qup10, prng_rosc, phase_flag,
+ _, qdss_gpio, _, _, _, _),
+ [22] = PINGROUP(22, qup11, qup12, phase_flag, _,
+ qdss_gpio, _, _, _, _),
+ [23] = PINGROUP(23, qup11, qup12, phase_flag, _,
+ qdss_gpio, _, _, _, _),
+ [24] = PINGROUP(24, qup12, qup11, phase_flag, _,
+ qdss_gpio, _, _, _, _),
+ [25] = PINGROUP(25, qup12, qup11, phase_flag, _,
+ qdss_gpio, _, _, _, _),
+ [26] = PINGROUP(26, qup13, qup14, intr_c,
+ phase_flag, _, qdss_gpio, _, _, _),
+ [27] = PINGROUP(27, qup13, qup14, intr_c,
+ phase_flag, _, qdss_gpio, _, _, _),
+ [28] = PINGROUP(28, qup14, qup13, intr_c,
+ phase_flag, _, qdss_gpio, _, _, _),
+ [29] = PINGROUP(29, qup14, qup13, qup16,
+ phase_flag, _, qdss_gpio, _, _, _),
+ [30] = PINGROUP(30, qup17, qup15, tmess_prng3,
+ phase_flag, _, qdss_gpio, _, _, _),
+ [31] = PINGROUP(31, qup17, qup15, tmess_prng2,
+ phase_flag, _, qdss_gpio, _, _, _),
+ [32] = PINGROUP(32, qup15, tmess_prng1, phase_flag,
+ _, qdss_gpio, _, _, _, _),
+ [33] = PINGROUP(33, qup15, tmess_prng0, phase_flag,
+ _, qdss_gpio, _, _, _, _),
+ [34] = PINGROUP(34, qup16, qdss_gpio, _, _, _, _, _, _, _),
+ [35] = PINGROUP(35, qup16, qdss_gpio, _, _, _, _, _, _, _),
+ [36] = PINGROUP(36, qup16, qdss_cti, _, _, _, _, _, _, _),
+ [37] = PINGROUP(37, qup16, qdss_cti, _, _, _, _, _, _, _),
+ [38] = PINGROUP(38, qup16, qdss_cti, _, _, _, _, _, _, _),
+ [39] = PINGROUP(39, qup16, qdss_cti, _, _, _, _, _, _, _),
+ [40] = PINGROUP(40, qup17, qdss_cti, _, _, _, _, _, _, _),
+ [41] = PINGROUP(41, qup17, qdss_cti, _, _, _, _, _, _, _),
+ [42] = PINGROUP(42, usb_con_det, phase_flag, _,
+ qdss_gpio, _, _, _, _, _),
+ [43] = PINGROUP(43, usb_dfp_en, phase_flag, _,
+ qdss_gpio, _, _, _, _, _),
+ [44] = PINGROUP(44, SI5518_INT, tgu_ch4, _, _, _, _, _, _, _),
+ [45] = PINGROUP(45, tgu_ch5, _, _, _, _, _, _, _, _),
+ [46] = PINGROUP(46, tgu_ch6, _, _, _, _, _, _, _, _),
+ [47] = PINGROUP(47, hardsync_pps_in, tgu_ch7, _, _, _, _, _, _, _),
+ [48] = PINGROUP(48, tod_pps_in, qdss_cti, _, _, _, _, _, _, _),
+ [49] = PINGROUP(49, gps_pps_in, qdss_cti, _, _, _, _, _, _, _),
+ [50] = PINGROUP(50, _, _, _, _, _, _, _, _, _),
+ [51] = PINGROUP(51, _, _, _, _, _, _, _, _, _),
+ [52] = PINGROUP(52, _, _, _, _, _, _, _, _, _),
+ [53] = PINGROUP(53, _, _, _, _, _, _, _, _, _),
+ [54] = PINGROUP(54, _, _, _, _, _, _, _, _, _),
+ [55] = PINGROUP(55, _, _, _, _, _, _, _, _, _),
+ [56] = PINGROUP(56, _, qlink6_wmss, _, _, _, _, _, _, _),
+ [57] = PINGROUP(57, _, qlink7_wmss, _, _, _, _, _, _, _),
+ [58] = PINGROUP(58, _, _, _, _, _, _, _, _, _),
+ [59] = PINGROUP(59, _, _, _, _, _, _, _, _, _),
+ [60] = PINGROUP(60, _, _, _, _, _, _, _, _, _),
+ [61] = PINGROUP(61, _, _, _, _, _, _, _, _, _),
+ [62] = PINGROUP(62, _, _, _, _, _, _, _, _, _),
+ [63] = PINGROUP(63, _, _, _, _, _, _, _, _, _),
+ [64] = PINGROUP(64, _, _, _, _, _, _, _, _, _),
+ [65] = PINGROUP(65, _, _, _, _, _, _, _, _, _),
+ [66] = PINGROUP(66, qlink0_request, _, _, _, _, _, _, _, _),
+ [67] = PINGROUP(67, qlink0_enable, _, _, _, _, _, _, _, _),
+ [68] = PINGROUP(68, qlink1_request, _, _, _, _, _, _, _, _),
+ [69] = PINGROUP(69, qlink1_enable, _, _, _, _, _, _, _, _),
+ [70] = PINGROUP(70, qlink2_request, _, _, _, _, _, _, _, _),
+ [71] = PINGROUP(71, qlink2_enable, _, _, _, _, _, _, _, _),
+ [72] = PINGROUP(72, qlink3_request, _, _, _, _, _, _, _, _),
+ [73] = PINGROUP(73, qlink3_enable, _, _, _, _, _, _, _, _),
+ [74] = PINGROUP(74, qlink4_request, _, _, _, _, _, _, _, _),
+ [75] = PINGROUP(75, qlink4_enable, _, _, _, _, _, _, _, _),
+ [76] = PINGROUP(76, qlink5_request, _, _, _, _, _, _, _, _),
+ [77] = PINGROUP(77, qlink5_enable, _, _, _, _, _, _, _, _),
+ [78] = PINGROUP(78, qlink6_request, _, _, _, _, _, _, _, _),
+ [79] = PINGROUP(79, qlink6_enable, _, _, _, _, _, _, _, _),
+ [80] = PINGROUP(80, qlink7_request, _, _, _, _, _, _, _, _),
+ [81] = PINGROUP(81, qlink7_enable, _, _, _, _, _, _, _, _),
+ [82] = PINGROUP(82, qlink0_wmss, _, _, _, _, _, _, _, _),
+ [83] = PINGROUP(83, qlink1_wmss, _, _, _, _, _, _, _, _),
+ [84] = PINGROUP(84, qlink4_wmss, _, _, _, _, _, _, _, _),
+ [85] = PINGROUP(85, qlink5_wmss, _, _, _, _, _, _, _, _),
+ [86] = PINGROUP(86, eth012_int_n, gcc_gp1, _, qdss_cti, _, _, _, _, _),
+ [87] = PINGROUP(87, eth345_int_n, gcc_gp2, _, qdss_cti, _, _, _, _, _),
+ [88] = PINGROUP(88, eth6_int_n, smb_alert, gcc_gp3, _,
+ qdss_gpio, _, _, _, _),
+ [89] = PINGROUP(89, phase_flag, cmu_rng, _,
+ qdss_gpio, atest_char, _, _, _, _),
+ [90] = PINGROUP(90, usb2phy_ac, phase_flag,
+ cmu_rng, _, qdss_gpio,
+ atest_char, _, _, _),
+ [91] = PINGROUP(91, usb_phy, phase_flag, cmu_rng,
+ _, qdss_gpio, atest_char, _, _, _),
+ [92] = PINGROUP(92, phase_flag, cmu_rng, _,
+ qdss_gpio, atest_char, _, _, _, _),
+ [93] = PINGROUP(93, vfr_0, qdss_cti, _, _, _, _, _, _, _),
+ [94] = PINGROUP(94, vfr_1, qdss_cti, _, _, _, _, _, _, _),
+ [95] = PINGROUP(95, phase_flag, _, qdss_gpio,
+ atest_char, _, _, _, _, _),
+ [96] = PINGROUP(96, phase_flag, _, qdss_gpio, _, _, _, _, _, _),
+ [97] = PINGROUP(97, phase_flag, _, qdss_gpio, _, _, _, _, _, _),
+ [98] = PINGROUP(98, pll_clk, _, _, _, _, _, _, _, _),
+ [99] = PINGROUP(99, pcie_clkreqn, char_exec, _, _, _, _, _, _, _),
+ [100] = PINGROUP(100, char_exec, _, _, _, _, _, _, _, _),
+ [101] = PINGROUP(101, smb_alert, _, _, _, _, _, _, _, _),
+ [102] = PINGROUP(102, phase_flag, _, qdss_gpio, _, _, _, _, _, _),
+ [103] = PINGROUP(103, CMO_PRI, qdss_gpio, _, _, _, _, _, _, _),
+ [104] = PINGROUP(104, _, _, _, _, _, _, _, _, _),
+ [105] = PINGROUP(105, _, _, _, _, _, _, _, _, _),
+ [106] = PINGROUP(106, _, _, _, _, _, _, _, _, _),
+ [107] = PINGROUP(107, _, _, _, _, _, _, _, _, _),
+ [108] = PINGROUP(108, _, _, _, _, _, _, _, _, _),
+ [109] = PINGROUP(109, _, _, _, _, _, _, _, _, _),
+ [110] = PINGROUP(110, _, _, _, _, _, _, _, _, _),
+ [111] = PINGROUP(111, _, _, _, _, _, _, _, _, _),
+ [112] = PINGROUP(112, _, _, _, _, _, _, _, _, _),
+ [113] = PINGROUP(113, _, _, _, _, _, _, _, _, _),
+ [114] = PINGROUP(114, qspi0, tb_trig, _,
+ atest_usb, ddr_pxi0, _, _, _, _),
+ [115] = PINGROUP(115, qspi1, _, atest_usb,
+ ddr_pxi0, _, _, _, _, _),
+ [116] = PINGROUP(116, qspi2, _, atest_usb,
+ ddr_pxi1, _, _, _, _, _),
+ [117] = PINGROUP(117, qspi3, _, atest_usb,
+ ddr_pxi1, _, _, _, _, _),
+ [118] = PINGROUP(118, _, atest_usb, ddr_pxi2, _, _, _, _, _, _),
+ [119] = PINGROUP(119, _, _, ddr_pxi2, _, _, _, _, _, _),
+ [120] = PINGROUP(120, _, _, ddr_pxi3, _, _, _, _, _, _),
+ [121] = PINGROUP(121, _, ddr_pxi3, _, _, _, _, _, _, _),
+ [122] = PINGROUP(122, _, ddr_pxi4, _, _, _, _, _, _, _),
+ [123] = PINGROUP(123, _, ddr_pxi4, _, _, _, _, _, _, _),
+ [124] = PINGROUP(124, _, ddr_pxi5, _, _, _, _, _, _, _),
+ [125] = PINGROUP(125, qspi_cs, _, ddr_pxi5, _, _, _, _, _, _),
+ [126] = PINGROUP(126, qspi_clk, _, ddr_pxi6, _, _, _, _, _, _),
+ [127] = PINGROUP(127, _, ddr_pxi6, _, _, _, _, _, _, _),
+ [128] = PINGROUP(128, qup22, _, ddr_pxi7, _, _, _, _, _, _),
+ [129] = PINGROUP(129, qup22, ddr_pxi7, _, _, _, _, _, _, _),
+ [130] = PINGROUP(130, qup05, qup06, jitter_bist_ref,
+ qdss_cti, _, _, _, _, _),
+ [131] = PINGROUP(131, qup05, qup06, qdss_cti, _, _, _, _, _, _),
+ [132] = PINGROUP(132, qup06, qup05, smb_dat,
+ qdss_cti, _, _, _, _, _),
+ [133] = PINGROUP(133, qup06, qup05, smb_clk,
+ qdss_cti, _, _, _, _, _),
+ [134] = PINGROUP(134, qup08, qup07, gcc_gp1, _,
+ qdss_cti, _, _, _, _),
+ [135] = PINGROUP(135, qup08, qup07, gcc_gp2, _,
+ qdss_cti, vsense_trigger, _, _, _),
+ [136] = PINGROUP(136, gcc_gp3, dbg_out_clk, _, _, _, _, _, _, _),
+ [137] = PINGROUP(137, _, _, _, _, _, _, _, _, _),
+ [138] = PINGROUP(138, qlink2_wmss, _, _, _, _, _, _, _, _),
+ [139] = PINGROUP(139, qlink3_wmss, _, _, _, _, _, _, _, _),
+ [140] = PINGROUP(140, _, _, _, _, _, _, _, _, _),
+ [141] = PINGROUP(141, intr_c, _, _, _, _, _, _, _, _),
+ [142] = PINGROUP(142, intr_c, _, _, _, _, _, _, _, _),
+ [143] = PINGROUP(143, intr_c, _, _, _, _, _, _, _, _),
+ [144] = PINGROUP(144, qdss_cti, _, _, _, _, _, _, _, _),
+ [145] = PINGROUP(145, qdss_cti, _, _, _, _, _, _, _, _),
+ [146] = PINGROUP(146, _, _, _, _, _, _, _, _, _),
+ [147] = PINGROUP(147, _, _, _, _, _, _, _, _, _),
+ [148] = PINGROUP(148, _, _, _, _, _, _, _, _, _),
+ [149] = PINGROUP(149, _, _, _, _, _, _, _, _, _),
+ [150] = PINGROUP(150, _, _, _, _, _, _, _, _, _),
+ [151] = SDC_QDSD_PINGROUP(sdc1_rclk, 0x9e000, 0, 0),
+ [152] = SDC_QDSD_PINGROUP(sdc1_clk, 0x9d000, 13, 6),
+ [153] = SDC_QDSD_PINGROUP(sdc1_cmd, 0x9d000, 11, 3),
+ [154] = SDC_QDSD_PINGROUP(sdc1_data, 0x9d000, 9, 0),
+};
+static const struct msm_pinctrl_soc_data qdu1000_tlmm = {
+ .pins = qdu1000_pins,
+ .npins = ARRAY_SIZE(qdu1000_pins),
+ .functions = qdu1000_functions,
+ .nfunctions = ARRAY_SIZE(qdu1000_functions),
+ .groups = qdu1000_groups,
+ .ngroups = ARRAY_SIZE(qdu1000_groups),
+ .ngpios = 151,
+};
+
+static int qdu1000_tlmm_probe(struct platform_device *pdev)
+{
+ return msm_pinctrl_probe(pdev, &qdu1000_tlmm);
+}
+
+static const struct of_device_id qdu1000_tlmm_of_match[] = {
+ { .compatible = "qcom,qdu1000-tlmm", },
+ { .compatible = "qcom,qru1000-tlmm", },
+ { },
+};
+MODULE_DEVICE_TABLE(of, qdu1000_tlmm_of_match);
+
+static struct platform_driver qdu1000_tlmm_driver = {
+ .driver = {
+ .name = "qdu1000-tlmm",
+ .of_match_table = qdu1000_tlmm_of_match,
+ },
+ .probe = qdu1000_tlmm_probe,
+ .remove = msm_pinctrl_remove,
+};
+
+static int __init qdu1000_tlmm_init(void)
+{
+ return platform_driver_register(&qdu1000_tlmm_driver);
+}
+arch_initcall(qdu1000_tlmm_init);
+
+static void __exit qdu1000_tlmm_exit(void)
+{
+ platform_driver_unregister(&qdu1000_tlmm_driver);
+}
+module_exit(qdu1000_tlmm_exit);
+
+MODULE_DESCRIPTION("QTI QDU1000 TLMM driver");
+MODULE_LICENSE("GPL");
--
2.38.0
On 10/14/2022 3:10 PM, Melody Olvera wrote:
> This patchset adds pinctrl support for the Qualcomm QDU1000 and QRU1000
> SoCs.
>
> The Qualcomm Technologies, Inc. Distributed Unit 1000 and Radio Unit
> 1000 are new SoCs meant for enabling Open RAN solutions. See more at
> https://www.qualcomm.com/content/dam/qcomm-martech/dm-assets/documents/qualcomm_5g_ran_platforms_product_brief.pdf
Changes from v1:
- grouped redundant pinctrl functions
- redid bindings
>
> Melody Olvera (2):
> dt-bindings: pinctrl: qcom: Add QDU1000 and QRU1000 pinctrl bindings
> pinctrl: qcom: Add QDU1000/QRU1000 pinctrl driver
>
> .../pinctrl/qcom,qdu1000-pinctrl.yaml | 159 ++
> drivers/pinctrl/qcom/Kconfig | 9 +
> drivers/pinctrl/qcom/Makefile | 1 +
> drivers/pinctrl/qcom/pinctrl-qdu1000.c | 1274 +++++++++++++++++
> 4 files changed, 1443 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,qdu1000-pinctrl.yaml
> create mode 100644 drivers/pinctrl/qcom/pinctrl-qdu1000.c
>
>
> base-commit: dca0a0385a4963145593ba417e1417af88a7c18d
On 14/10/2022 18:10, Melody Olvera wrote:
> Add pin control driver for the TLMM block found in the QDU1000
> and QRU1000 SoC.
>
> Signed-off-by: Melody Olvera <[email protected]>
> ---
> drivers/pinctrl/qcom/Kconfig | 9 +
> drivers/pinctrl/qcom/Makefile | 1 +
> drivers/pinctrl/qcom/pinctrl-qdu1000.c | 1274 ++++++++++++++++++++++++
> 3 files changed, 1284 insertions(+)
> create mode 100644 drivers/pinctrl/qcom/pinctrl-qdu1000.c
>
> diff --git a/drivers/pinctrl/qcom/Kconfig b/drivers/pinctrl/qcom/Kconfig
> index 9dc2d803a586..4ab857dc2847 100644
> --- a/drivers/pinctrl/qcom/Kconfig
> +++ b/drivers/pinctrl/qcom/Kconfig
> @@ -248,6 +248,15 @@ config PINCTRL_QCOM_SSBI_PMIC
> which are using SSBI for communication with SoC. Example PMIC's
> devices are pm8058 and pm8921.
>
> +config PINCTRL_QDU1000
> + tristate "Qualcomm Tehcnologies Inc QDU1000/QRU1000 pin controller driver"
> + depends on GPIOLIB && OF
depends on ARM64 || COMPILE_TEST
> + depends on PINCTRL_MSM
> + help
> + This is the pinctrl, pinmux, pinconf, and gpiolib driver for the
> + Qualcomm Technologies Inc TLMM block found on the Qualcomm
> + Technologies Inc QDU1000 and QRU1000 platforms.
> +
(...)
> + PINCTRL_PIN(138, "GPIO_138"),
> + PINCTRL_PIN(139, "GPIO_139"),
> + PINCTRL_PIN(140, "GPIO_140"),
> + PINCTRL_PIN(141, "GPIO_141"),
> + PINCTRL_PIN(142, "GPIO_142"),
> + PINCTRL_PIN(143, "GPIO_143"),
> + PINCTRL_PIN(144, "GPIO_144"),
> + PINCTRL_PIN(145, "GPIO_145"),
> + PINCTRL_PIN(146, "GPIO_146"),
> + PINCTRL_PIN(147, "GPIO_147"),
> + PINCTRL_PIN(148, "GPIO_148"),
> + PINCTRL_PIN(149, "GPIO_149"),
> + PINCTRL_PIN(150, "GPIO_150"),
Your bindings said you have GPIOs 0-149, not 0-150.
> + PINCTRL_PIN(151, "SDC1_RCLK"),
> + PINCTRL_PIN(152, "SDC1_CLK"),
> + PINCTRL_PIN(153, "SDC1_CMD"),
> + PINCTRL_PIN(154, "SDC1_DATA"),
This also does not match bindings.
Best regards,
Krzysztof
On 14/10/2022 18:10, Melody Olvera wrote:
> Add documentation details for device tree bindings for QDU1000 and QRU1000
> TLMM devices.
>
> Signed-off-by: Melody Olvera <[email protected]>
> ---
> .../pinctrl/qcom,qdu1000-pinctrl.yaml | 159 ++++++++++++++++++
> 1 file changed, 159 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,qdu1000-pinctrl.yaml
>
> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,qdu1000-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,qdu1000-pinctrl.yaml
> new file mode 100644
> index 000000000000..2ec661e5e1e0
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pinctrl/qcom,qdu1000-pinctrl.yaml
Filename matching compatible, so qcom,qdu1000-tlmm.yaml
> @@ -0,0 +1,159 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pinctrl/qcom,qdu1000-pinctrl.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Qualcomm Technologies, Inc. QDU1000/QRU1000 TLMM block
> +
> +maintainers:
> + - Melody Olvera <[email protected]>
> +
> +description: |
> + This binding describes the Top Level Mode Multiplexer block (TLMM) found
> + in the QDU1000 and QRU1000 platforms.
> +
> +allOf:
> + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
> +
> +properties:
> + compatible:
> + items:
> + - const: qcom,qdu1000-tlmm
> + - const: qcom,qru1000-tlmm
> +
> + reg:
> + maxItems: 1
Blank line
> + interrupts: true
> + interrupt-controller: true
> + "#interrupt-cells": true
> + gpio-controller: true
> +
> + gpio-reserved-ranges:
> + minItems: 1
> + maxItems: 75
> +
> + gpio-line-names:
> + maxItems: 150
> +
> + "#gpio-cells": true
> + gpio-ranges: true
> + wakeup-parent: true
> +
> +patternProperties:
> + "-state$":
> + oneOf:
> + - $ref: "#/$defs/qcom-qdu1000-tlmm-state"
> + - patternProperties:
> + "-pins$":
> + $ref: "#/$defs/qcom-qdu1000-tlmm-state"
> + additionalProperties: false
> +
> +$defs:
> + qcom-qdu1000-tlmm-state:
> + type: object
> + description:
> + Pinctrl node's client devices use subnodes for desired pin configuration.
> + Client device subnodes use below standard properties.
> + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
> +
> + properties:
> + pins:
> + description:
> + List of gpio pins affected by the properties specified in this
> + subnode.
> + items:
> + oneOf:
> + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-4][0-9])$"
> + - enum: [ ufs_reset, sdc2_clk, sdc2_cmd, sdc2_data ]
> + minItems: 1
> + maxItems: 36
> +
> + function:
> + description:
> + Specify the alternative function to be configured for the specified
> + pins.
> + enum: [ adsp_ext, agera_pll, atest_char, atest_tsens, atest_tsens2,
> + atest_usb1, atest_usb10, atest_usb11, atest_usb12, atest_usb13,
> + atest_usb2, atest_usb20, atest_usb21, atest_usb22, atest_usb23,
> + audio_ref, btfm_slimbus, cam_mclk, cci_async, cci_i2c,
> + cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4,
> + cri_trng, cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0,
> + ddr_pxi1, ddr_pxi2, ddr_pxi3, edp_hot, edp_lcd, gcc_gp1,
> + gcc_gp2, gcc_gp3, gpio, jitter_bist, ldo_en, ldo_update,
> + lpass_slimbus, mdp_vsync, mdp_vsync0, mdp_vsync1, mdp_vsync2,
> + mdp_vsync3, mss_lte, m_voc, nav_pps, pa_indicator, pci_e0,
> + pci_e1, phase_flag, pll_bist, pll_bypassnl, pll_reset,
> + pri_mi2s, pri_mi2s_ws, prng_rosc, qdss, qdss_cti, qlink_enable,
> + qlink_request, qspi_clk, qspi_cs, qspi_data, qua_mi2s, qup0,
> + qup1, qup10, qup11, qup12, qup13, qup14, qup15, qup2, qup3,
> + qup4, qup5, qup6, qup7, qup8, qup9, qup_l4, qup_l5, qup_l6,
> + sdc4_clk, sdc4_cmd, sdc4_data, sd_write, sec_mi2s, sp_cmu,
> + spkr_i2s, ter_mi2s, tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3,
> + tsense_pwm1, tsense_pwm2, tsif1_clk, tsif1_data, tsif1_en,
> + tsif1_error, tsif1_sync, tsif2_clk, tsif2_data, tsif2_en,
> + tsif2_error, tsif2_sync, uim1_clk, uim1_data, uim1_present,
> + uim1_reset, uim2_clk, uim2_data, uim2_present, uim2_reset,
> + uim_batt, usb_phy, vfr_1, vsense_trigger, wlan1_adc0,
> + wlan1_adc1, wlan2_adc0, wlan2_adc1]
> +
> + bias-disable: true
> + bias-pull-down: true
> + bias-pull-up: true
> + drive-strength: true
> + input-enable: true
> + output-high: true
> + output-low: true
> +
> + required:
> + - pins
> +
> + additionalProperties: false
> +
> +required:
> + - compatible
> + - reg
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/interrupt-controller/arm-gic.h>
> +
> + pinctrl@03000000 {
> + compatible = "qcom,qdu1000-pinctrl";
> + reg = <0x03000000 0xdc2000>;
> + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
> + gpio-controller;
> + #gpio-cells = <2>;
> + interrupt-controller;
> + #interrupt-cells = <2>;
> + gpio-ranges = <&tlmm 0 0 151>;
> + wakeup-parent = <&pdc_intc>;
> +
> + cci0-default-state {
You have now bindings for your new SoC and you still did not run them
against your own DTS... The purpose of DT schema is not only to have
them, but actually to use them.
There is no point for us to do manual review if automated tools can do
the work, right?
So please test your DTS.
Best regards,
Krzysztof
On Fri, 14 Oct 2022 15:10:24 -0700, Melody Olvera wrote:
> Add documentation details for device tree bindings for QDU1000 and QRU1000
> TLMM devices.
>
> Signed-off-by: Melody Olvera <[email protected]>
> ---
> .../pinctrl/qcom,qdu1000-pinctrl.yaml | 159 ++++++++++++++++++
> 1 file changed, 159 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,qdu1000-pinctrl.yaml
>
My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):
yamllint warnings/errors:
dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/pinctrl/qcom,qdu1000-pinctrl.example.dts:23.26-59.11: Warning (unit_address_format): /example-0/pinctrl@03000000: unit name should not have leading 0s
Documentation/devicetree/bindings/pinctrl/qcom,qdu1000-pinctrl.example.dtb:0:0: /example-0/pinctrl@03000000: failed to match any schema with compatible: ['qcom,qdu1000-pinctrl']
doc reference errors (make refcheckdocs):
See https://patchwork.ozlabs.org/patch/
This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit.
On 10/15/2022 6:38 AM, Krzysztof Kozlowski wrote:
> On 14/10/2022 18:10, Melody Olvera wrote:
>> Add documentation details for device tree bindings for QDU1000 and QRU1000
>> TLMM devices.
>>
>> Signed-off-by: Melody Olvera <[email protected]>
>> ---
>> .../pinctrl/qcom,qdu1000-pinctrl.yaml | 159 ++++++++++++++++++
>> 1 file changed, 159 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/pinctrl/qcom,qdu1000-pinctrl.yaml
>>
>> diff --git a/Documentation/devicetree/bindings/pinctrl/qcom,qdu1000-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/qcom,qdu1000-pinctrl.yaml
>> new file mode 100644
>> index 000000000000..2ec661e5e1e0
>> --- /dev/null
>> +++ b/Documentation/devicetree/bindings/pinctrl/qcom,qdu1000-pinctrl.yaml
> Filename matching compatible, so qcom,qdu1000-tlmm.yaml
Got it.
>> @@ -0,0 +1,159 @@
>> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
>> +%YAML 1.2
>> +---
>> +$id: http://devicetree.org/schemas/pinctrl/qcom,qdu1000-pinctrl.yaml#
>> +$schema: http://devicetree.org/meta-schemas/core.yaml#
>> +
>> +title: Qualcomm Technologies, Inc. QDU1000/QRU1000 TLMM block
>> +
>> +maintainers:
>> + - Melody Olvera <[email protected]>
>> +
>> +description: |
>> + This binding describes the Top Level Mode Multiplexer block (TLMM) found
>> + in the QDU1000 and QRU1000 platforms.
>> +
>> +allOf:
>> + - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
>> +
>> +properties:
>> + compatible:
>> + items:
>> + - const: qcom,qdu1000-tlmm
>> + - const: qcom,qru1000-tlmm
>> +
>> + reg:
>> + maxItems: 1
> Blank line
Sure.
>
>> + interrupts: true
>> + interrupt-controller: true
>> + "#interrupt-cells": true
>> + gpio-controller: true
>> +
>> + gpio-reserved-ranges:
>> + minItems: 1
>> + maxItems: 75
>> +
>> + gpio-line-names:
>> + maxItems: 150
>> +
>> + "#gpio-cells": true
>> + gpio-ranges: true
>> + wakeup-parent: true
>> +
>> +patternProperties:
>> + "-state$":
>> + oneOf:
>> + - $ref: "#/$defs/qcom-qdu1000-tlmm-state"
>> + - patternProperties:
>> + "-pins$":
>> + $ref: "#/$defs/qcom-qdu1000-tlmm-state"
>> + additionalProperties: false
>> +
>> +$defs:
>> + qcom-qdu1000-tlmm-state:
>> + type: object
>> + description:
>> + Pinctrl node's client devices use subnodes for desired pin configuration.
>> + Client device subnodes use below standard properties.
>> + $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
>> +
>> + properties:
>> + pins:
>> + description:
>> + List of gpio pins affected by the properties specified in this
>> + subnode.
>> + items:
>> + oneOf:
>> + - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-4][0-9])$"
>> + - enum: [ ufs_reset, sdc2_clk, sdc2_cmd, sdc2_data ]
>> + minItems: 1
>> + maxItems: 36
>> +
>> + function:
>> + description:
>> + Specify the alternative function to be configured for the specified
>> + pins.
>> + enum: [ adsp_ext, agera_pll, atest_char, atest_tsens, atest_tsens2,
>> + atest_usb1, atest_usb10, atest_usb11, atest_usb12, atest_usb13,
>> + atest_usb2, atest_usb20, atest_usb21, atest_usb22, atest_usb23,
>> + audio_ref, btfm_slimbus, cam_mclk, cci_async, cci_i2c,
>> + cci_timer0, cci_timer1, cci_timer2, cci_timer3, cci_timer4,
>> + cri_trng, cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0,
>> + ddr_pxi1, ddr_pxi2, ddr_pxi3, edp_hot, edp_lcd, gcc_gp1,
>> + gcc_gp2, gcc_gp3, gpio, jitter_bist, ldo_en, ldo_update,
>> + lpass_slimbus, mdp_vsync, mdp_vsync0, mdp_vsync1, mdp_vsync2,
>> + mdp_vsync3, mss_lte, m_voc, nav_pps, pa_indicator, pci_e0,
>> + pci_e1, phase_flag, pll_bist, pll_bypassnl, pll_reset,
>> + pri_mi2s, pri_mi2s_ws, prng_rosc, qdss, qdss_cti, qlink_enable,
>> + qlink_request, qspi_clk, qspi_cs, qspi_data, qua_mi2s, qup0,
>> + qup1, qup10, qup11, qup12, qup13, qup14, qup15, qup2, qup3,
>> + qup4, qup5, qup6, qup7, qup8, qup9, qup_l4, qup_l5, qup_l6,
>> + sdc4_clk, sdc4_cmd, sdc4_data, sd_write, sec_mi2s, sp_cmu,
>> + spkr_i2s, ter_mi2s, tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3,
>> + tsense_pwm1, tsense_pwm2, tsif1_clk, tsif1_data, tsif1_en,
>> + tsif1_error, tsif1_sync, tsif2_clk, tsif2_data, tsif2_en,
>> + tsif2_error, tsif2_sync, uim1_clk, uim1_data, uim1_present,
>> + uim1_reset, uim2_clk, uim2_data, uim2_present, uim2_reset,
>> + uim_batt, usb_phy, vfr_1, vsense_trigger, wlan1_adc0,
>> + wlan1_adc1, wlan2_adc0, wlan2_adc1]
>> +
>> + bias-disable: true
>> + bias-pull-down: true
>> + bias-pull-up: true
>> + drive-strength: true
>> + input-enable: true
>> + output-high: true
>> + output-low: true
>> +
>> + required:
>> + - pins
>> +
>> + additionalProperties: false
>> +
>> +required:
>> + - compatible
>> + - reg
>> +
>> +additionalProperties: false
>> +
>> +examples:
>> + - |
>> + #include <dt-bindings/interrupt-controller/arm-gic.h>
>> +
>> + pinctrl@03000000 {
>> + compatible = "qcom,qdu1000-pinctrl";
>> + reg = <0x03000000 0xdc2000>;
>> + interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
>> + gpio-controller;
>> + #gpio-cells = <2>;
>> + interrupt-controller;
>> + #interrupt-cells = <2>;
>> + gpio-ranges = <&tlmm 0 0 151>;
>> + wakeup-parent = <&pdc_intc>;
>> +
>> + cci0-default-state {
> You have now bindings for your new SoC and you still did not run them
> against your own DTS... The purpose of DT schema is not only to have
> them, but actually to use them.
>
> There is no point for us to do manual review if automated tools can do
> the work, right?
>
> So please test your DTS.
Yes this is very fair. Apologies; I'm new to this process so I'm still learning about the
tools at my disposal. I believe I've figured out running dt_bindings_check and dtbs_check;
future patchsets will have these run prior to submitting.
Thanks,
Melody
On 10/15/2022 6:40 AM, Krzysztof Kozlowski wrote:
> On 14/10/2022 18:10, Melody Olvera wrote:
>> Add pin control driver for the TLMM block found in the QDU1000
>> and QRU1000 SoC.
>>
>> Signed-off-by: Melody Olvera <[email protected]>
>> ---
>> drivers/pinctrl/qcom/Kconfig | 9 +
>> drivers/pinctrl/qcom/Makefile | 1 +
>> drivers/pinctrl/qcom/pinctrl-qdu1000.c | 1274 ++++++++++++++++++++++++
>> 3 files changed, 1284 insertions(+)
>> create mode 100644 drivers/pinctrl/qcom/pinctrl-qdu1000.c
>>
>> diff --git a/drivers/pinctrl/qcom/Kconfig b/drivers/pinctrl/qcom/Kconfig
>> index 9dc2d803a586..4ab857dc2847 100644
>> --- a/drivers/pinctrl/qcom/Kconfig
>> +++ b/drivers/pinctrl/qcom/Kconfig
>> @@ -248,6 +248,15 @@ config PINCTRL_QCOM_SSBI_PMIC
>> which are using SSBI for communication with SoC. Example PMIC's
>> devices are pm8058 and pm8921.
>>
>> +config PINCTRL_QDU1000
>> + tristate "Qualcomm Tehcnologies Inc QDU1000/QRU1000 pin controller driver"
>> + depends on GPIOLIB && OF
> depends on ARM64 || COMPILE_TEST
Will add.
>> + depends on PINCTRL_MSM
>> + help
>> + This is the pinctrl, pinmux, pinconf, and gpiolib driver for the
>> + Qualcomm Technologies Inc TLMM block found on the Qualcomm
>> + Technologies Inc QDU1000 and QRU1000 platforms.
>> +
> (...)
>
>> + PINCTRL_PIN(138, "GPIO_138"),
>> + PINCTRL_PIN(139, "GPIO_139"),
>> + PINCTRL_PIN(140, "GPIO_140"),
>> + PINCTRL_PIN(141, "GPIO_141"),
>> + PINCTRL_PIN(142, "GPIO_142"),
>> + PINCTRL_PIN(143, "GPIO_143"),
>> + PINCTRL_PIN(144, "GPIO_144"),
>> + PINCTRL_PIN(145, "GPIO_145"),
>> + PINCTRL_PIN(146, "GPIO_146"),
>> + PINCTRL_PIN(147, "GPIO_147"),
>> + PINCTRL_PIN(148, "GPIO_148"),
>> + PINCTRL_PIN(149, "GPIO_149"),
>> + PINCTRL_PIN(150, "GPIO_150"),
> Your bindings said you have GPIOs 0-149, not 0-150.
Updated bindings.
>
>> + PINCTRL_PIN(151, "SDC1_RCLK"),
>> + PINCTRL_PIN(152, "SDC1_CLK"),
>> + PINCTRL_PIN(153, "SDC1_CMD"),
>> + PINCTRL_PIN(154, "SDC1_DATA"),
> This also does not match bindings.
Updated bindings.
Thanks,
Melody