From: Dylan Van Assche <[email protected]>
Add serial1 alias, firmware name and use 4 pin UART pinmux.
Signed-off-by: Dylan Van Assche <[email protected]>
Tested-by: Alexander Martinz <[email protected]>
Signed-off-by: Caleb Connolly <[email protected]>
---
arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts b/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts
index 83261c9bb4f2..3e038156af4f 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts
+++ b/arch/arm64/boot/dts/qcom/sdm845-shift-axolotl.dts
@@ -22,6 +22,7 @@ / {
aliases {
display0 = &framebuffer0;
+ serial1 = &uart6;
serial0 = &uart9;
};
@@ -693,9 +694,17 @@ config {
&uart6 {
status = "okay";
+ pinctrl-0 = <&qup_uart6_4pin>;
+
bluetooth {
compatible = "qcom,wcn3990-bt";
+ /*
+ * This path is relative to the qca/
+ * subdir under lib/firmware.
+ */
+ firmware-name = "axolotl/crnv21.bin";
+
vddio-supply = <&vreg_s4a_1p8>;
vddxo-supply = <&vreg_l7a_1p8>;
vddrf-supply = <&vreg_l17a_1p3>;
--
2.38.0
On 16/10/2022 15:58, Krzysztof Kozlowski wrote:
> On 16/10/2022 10:34, Caleb Connolly wrote:
>> From: Dylan Van Assche <[email protected]>
>>
>> Add serial1 alias, firmware name and use 4 pin UART pinmux.
>>
>> Signed-off-by: Dylan Van Assche <[email protected]>
>> Tested-by: Alexander Martinz <[email protected]>
>> Signed-off-by: Caleb Connolly <[email protected]>
>
> All your patches - except 1 - are not properly threaded.
Sorry about that! It seems that Protonmail have decided to break In-Reply-To
again... I resent the series with threading here:
https://lore.kernel.org/linux-arm-msm/[email protected]/T/#t
>
> Best regards,
> Krzysztof
>
--
Kind Regards,
Caleb
On 16/10/2022 10:34, Caleb Connolly wrote:
> From: Dylan Van Assche <[email protected]>
>
> Add serial1 alias, firmware name and use 4 pin UART pinmux.
>
> Signed-off-by: Dylan Van Assche <[email protected]>
> Tested-by: Alexander Martinz <[email protected]>
> Signed-off-by: Caleb Connolly <[email protected]>
All your patches - except 1 - are not properly threaded.
Best regards,
Krzysztof