The offset value of the mapping window in the kernel structure is
calculated using the value of the previous window offset. This doesn't
reflect how the HW is configured and can lead to erroneous setting of
the second flash device (CE1).
Cc: Chin-Ting Kuo <[email protected]>
Fixes: e3228ed92893 ("spi: spi-mem: Convert Aspeed SMC driver to spi-mem")
Signed-off-by: Cédric Le Goater <[email protected]>
---
drivers/spi/spi-aspeed-smc.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/spi/spi-aspeed-smc.c b/drivers/spi/spi-aspeed-smc.c
index 33cefcf18392..b90571396a60 100644
--- a/drivers/spi/spi-aspeed-smc.c
+++ b/drivers/spi/spi-aspeed-smc.c
@@ -398,7 +398,7 @@ static void aspeed_spi_get_windows(struct aspeed_spi *aspi,
windows[cs].cs = cs;
windows[cs].size = data->segment_end(aspi, reg_val) -
data->segment_start(aspi, reg_val);
- windows[cs].offset = cs ? windows[cs - 1].offset + windows[cs - 1].size : 0;
+ windows[cs].offset = data->segment_start(aspi, reg_val) - aspi->ahb_base_phy;
dev_vdbg(aspi->dev, "CE%d offset=0x%.8x size=0x%x\n", cs,
windows[cs].offset, windows[cs].size);
}
--
2.37.3
On Sun, 16 Oct 2022 at 15:57, Cédric Le Goater <[email protected]> wrote:
>
> The offset value of the mapping window in the kernel structure is
> calculated using the value of the previous window offset. This doesn't
> reflect how the HW is configured and can lead to erroneous setting of
> the second flash device (CE1).
So .offset is expected to be the absolute address of the window, and
this was okay for the 2400/2500 but was broken on the 2600?
Reviewed-by: Joel Stanley <[email protected]>
>
> Cc: Chin-Ting Kuo <[email protected]>
> Fixes: e3228ed92893 ("spi: spi-mem: Convert Aspeed SMC driver to spi-mem")
> Signed-off-by: Cédric Le Goater <[email protected]>
> ---
> drivers/spi/spi-aspeed-smc.c | 2 +-
> 1 file changed, 1 insertion(+), 1 deletion(-)
>
> diff --git a/drivers/spi/spi-aspeed-smc.c b/drivers/spi/spi-aspeed-smc.c
> index 33cefcf18392..b90571396a60 100644
> --- a/drivers/spi/spi-aspeed-smc.c
> +++ b/drivers/spi/spi-aspeed-smc.c
> @@ -398,7 +398,7 @@ static void aspeed_spi_get_windows(struct aspeed_spi *aspi,
> windows[cs].cs = cs;
> windows[cs].size = data->segment_end(aspi, reg_val) -
> data->segment_start(aspi, reg_val);
> - windows[cs].offset = cs ? windows[cs - 1].offset + windows[cs - 1].size : 0;
> + windows[cs].offset = data->segment_start(aspi, reg_val) - aspi->ahb_base_phy;
> dev_vdbg(aspi->dev, "CE%d offset=0x%.8x size=0x%x\n", cs,
> windows[cs].offset, windows[cs].size);
> }
> --
> 2.37.3
>
On 10/17/22 00:43, Joel Stanley wrote:
> On Sun, 16 Oct 2022 at 15:57, Cédric Le Goater <[email protected]> wrote:
>>
>> The offset value of the mapping window in the kernel structure is
>> calculated using the value of the previous window offset. This doesn't
>> reflect how the HW is configured and can lead to erroneous setting of
>> the second flash device (CE1).
>
> So .offset is expected to be the absolute address of the window, and
> this was okay for the 2400/2500 but was broken on the 2600?
the aspeed_spi_get_windows() routine collects in an array the window/decoding
range setting for each CS, and the offset for CS1 and above is computed from
the offset/size of the previous CS. But this makes an assumption on the fact
ranges are contiguous, which is not necessarily how the HW is configured.
C.
> Reviewed-by: Joel Stanley <[email protected]>
>
>
>>
>> Cc: Chin-Ting Kuo <[email protected]>
>> Fixes: e3228ed92893 ("spi: spi-mem: Convert Aspeed SMC driver to spi-mem")
>> Signed-off-by: Cédric Le Goater <[email protected]>
>> ---
>> drivers/spi/spi-aspeed-smc.c | 2 +-
>> 1 file changed, 1 insertion(+), 1 deletion(-)
>>
>> diff --git a/drivers/spi/spi-aspeed-smc.c b/drivers/spi/spi-aspeed-smc.c
>> index 33cefcf18392..b90571396a60 100644
>> --- a/drivers/spi/spi-aspeed-smc.c
>> +++ b/drivers/spi/spi-aspeed-smc.c
>> @@ -398,7 +398,7 @@ static void aspeed_spi_get_windows(struct aspeed_spi *aspi,
>> windows[cs].cs = cs;
>> windows[cs].size = data->segment_end(aspi, reg_val) -
>> data->segment_start(aspi, reg_val);
>> - windows[cs].offset = cs ? windows[cs - 1].offset + windows[cs - 1].size : 0;
>> + windows[cs].offset = data->segment_start(aspi, reg_val) - aspi->ahb_base_phy;
>> dev_vdbg(aspi->dev, "CE%d offset=0x%.8x size=0x%x\n", cs,
>> windows[cs].offset, windows[cs].size);
>> }
>> --
>> 2.37.3
>>