This reverts commit 32bc936d732171d48c9c8f96c4fa25ac3ed7e1c7.
This patch was part of a patch series to add APSS RSC to
Cluster power domain
https://patchwork.kernel.org/project/linux-pm/cover/[email protected]/
but the rest of the patches in this series got NACKed and didn't land.
These cpuidle states made RB5 (sm8250) highly unstable and I run into
following crash every now and then:
[ T1] vreg_l11c_3p3: failed to enable: -ETIMEDOUT
[ T1] qcom-rpmh-regulator 18200000.rsc:pm8150l-rpmh-regulators: ldo11: devm_regulator_register() failed, ret=-110
[ T1] qcom-rpmh-regulator: probe of 18200000.rsc:pm8150l-rpmh-regulators failed with error -110
I reported this breakage earlier this year as well:
https://lore.kernel.org/all/CAMi1Hd2Sngya_2m2odkjq4fdV8OiiXsFMEX1bb807cWMC7H-sg@mail.gmail.com/
I can confirm that if I cherry-pick the rest of the patches from the
series then I can't reproduce this crash, but I'm not sure when the rest
of the patches are going to land though.
Signed-off-by: Amit Pundir <[email protected]>
---
arch/arm64/boot/dts/qcom/sm8250.dtsi | 105 ---------------------------
1 file changed, 105 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
index a5b62cadb129..a2c15da1a450 100644
--- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
@@ -101,8 +101,6 @@ CPU0: cpu@0 {
capacity-dmips-mhz = <448>;
dynamic-power-coefficient = <205>;
next-level-cache = <&L2_0>;
- power-domains = <&CPU_PD0>;
- power-domain-names = "psci";
qcom,freq-domain = <&cpufreq_hw 0>;
operating-points-v2 = <&cpu0_opp_table>;
interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>,
@@ -125,8 +123,6 @@ CPU1: cpu@100 {
capacity-dmips-mhz = <448>;
dynamic-power-coefficient = <205>;
next-level-cache = <&L2_100>;
- power-domains = <&CPU_PD1>;
- power-domain-names = "psci";
qcom,freq-domain = <&cpufreq_hw 0>;
operating-points-v2 = <&cpu0_opp_table>;
interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>,
@@ -146,8 +142,6 @@ CPU2: cpu@200 {
capacity-dmips-mhz = <448>;
dynamic-power-coefficient = <205>;
next-level-cache = <&L2_200>;
- power-domains = <&CPU_PD2>;
- power-domain-names = "psci";
qcom,freq-domain = <&cpufreq_hw 0>;
operating-points-v2 = <&cpu0_opp_table>;
interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>,
@@ -167,8 +161,6 @@ CPU3: cpu@300 {
capacity-dmips-mhz = <448>;
dynamic-power-coefficient = <205>;
next-level-cache = <&L2_300>;
- power-domains = <&CPU_PD3>;
- power-domain-names = "psci";
qcom,freq-domain = <&cpufreq_hw 0>;
operating-points-v2 = <&cpu0_opp_table>;
interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>,
@@ -188,8 +180,6 @@ CPU4: cpu@400 {
capacity-dmips-mhz = <1024>;
dynamic-power-coefficient = <379>;
next-level-cache = <&L2_400>;
- power-domains = <&CPU_PD4>;
- power-domain-names = "psci";
qcom,freq-domain = <&cpufreq_hw 1>;
operating-points-v2 = <&cpu4_opp_table>;
interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>,
@@ -209,8 +199,6 @@ CPU5: cpu@500 {
capacity-dmips-mhz = <1024>;
dynamic-power-coefficient = <379>;
next-level-cache = <&L2_500>;
- power-domains = <&CPU_PD5>;
- power-domain-names = "psci";
qcom,freq-domain = <&cpufreq_hw 1>;
operating-points-v2 = <&cpu4_opp_table>;
interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>,
@@ -231,8 +219,6 @@ CPU6: cpu@600 {
capacity-dmips-mhz = <1024>;
dynamic-power-coefficient = <379>;
next-level-cache = <&L2_600>;
- power-domains = <&CPU_PD6>;
- power-domain-names = "psci";
qcom,freq-domain = <&cpufreq_hw 1>;
operating-points-v2 = <&cpu4_opp_table>;
interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>,
@@ -252,8 +238,6 @@ CPU7: cpu@700 {
capacity-dmips-mhz = <1024>;
dynamic-power-coefficient = <444>;
next-level-cache = <&L2_700>;
- power-domains = <&CPU_PD7>;
- power-domain-names = "psci";
qcom,freq-domain = <&cpufreq_hw 2>;
operating-points-v2 = <&cpu7_opp_table>;
interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>,
@@ -300,42 +284,6 @@ core7 {
};
};
};
-
- idle-states {
- entry-method = "psci";
-
- LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
- compatible = "arm,idle-state";
- idle-state-name = "silver-rail-power-collapse";
- arm,psci-suspend-param = <0x40000004>;
- entry-latency-us = <360>;
- exit-latency-us = <531>;
- min-residency-us = <3934>;
- local-timer-stop;
- };
-
- BIG_CPU_SLEEP_0: cpu-sleep-1-0 {
- compatible = "arm,idle-state";
- idle-state-name = "gold-rail-power-collapse";
- arm,psci-suspend-param = <0x40000004>;
- entry-latency-us = <702>;
- exit-latency-us = <1061>;
- min-residency-us = <4488>;
- local-timer-stop;
- };
- };
-
- domain-idle-states {
- CLUSTER_SLEEP_0: cluster-sleep-0 {
- compatible = "domain-idle-state";
- idle-state-name = "cluster-llcc-off";
- arm,psci-suspend-param = <0x4100c244>;
- entry-latency-us = <3264>;
- exit-latency-us = <6562>;
- min-residency-us = <9987>;
- local-timer-stop;
- };
- };
};
cpu0_opp_table: opp-table-cpu0 {
@@ -649,59 +597,6 @@ pmu {
psci {
compatible = "arm,psci-1.0";
method = "smc";
-
- CPU_PD0: cpu0 {
- #power-domain-cells = <0>;
- power-domains = <&CLUSTER_PD>;
- domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
- };
-
- CPU_PD1: cpu1 {
- #power-domain-cells = <0>;
- power-domains = <&CLUSTER_PD>;
- domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
- };
-
- CPU_PD2: cpu2 {
- #power-domain-cells = <0>;
- power-domains = <&CLUSTER_PD>;
- domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
- };
-
- CPU_PD3: cpu3 {
- #power-domain-cells = <0>;
- power-domains = <&CLUSTER_PD>;
- domain-idle-states = <&LITTLE_CPU_SLEEP_0>;
- };
-
- CPU_PD4: cpu4 {
- #power-domain-cells = <0>;
- power-domains = <&CLUSTER_PD>;
- domain-idle-states = <&BIG_CPU_SLEEP_0>;
- };
-
- CPU_PD5: cpu5 {
- #power-domain-cells = <0>;
- power-domains = <&CLUSTER_PD>;
- domain-idle-states = <&BIG_CPU_SLEEP_0>;
- };
-
- CPU_PD6: cpu6 {
- #power-domain-cells = <0>;
- power-domains = <&CLUSTER_PD>;
- domain-idle-states = <&BIG_CPU_SLEEP_0>;
- };
-
- CPU_PD7: cpu7 {
- #power-domain-cells = <0>;
- power-domains = <&CLUSTER_PD>;
- domain-idle-states = <&BIG_CPU_SLEEP_0>;
- };
-
- CLUSTER_PD: cpu-cluster0 {
- #power-domain-cells = <0>;
- domain-idle-states = <&CLUSTER_SLEEP_0>;
- };
};
qup_opp_table: opp-table-qup {
--
2.25.1
On Mon, Oct 17, 2022 at 10:10:05PM +0530, Amit Pundir wrote:
> This reverts commit 32bc936d732171d48c9c8f96c4fa25ac3ed7e1c7.
>
> This patch was part of a patch series to add APSS RSC to
> Cluster power domain
> https://patchwork.kernel.org/project/linux-pm/cover/[email protected]/
> but the rest of the patches in this series got NACKed and didn't land.
>
> These cpuidle states made RB5 (sm8250) highly unstable and I run into
> following crash every now and then:
>
> [ T1] vreg_l11c_3p3: failed to enable: -ETIMEDOUT
> [ T1] qcom-rpmh-regulator 18200000.rsc:pm8150l-rpmh-regulators: ldo11: devm_regulator_register() failed, ret=-110
> [ T1] qcom-rpmh-regulator: probe of 18200000.rsc:pm8150l-rpmh-regulators failed with error -110
>
> I reported this breakage earlier this year as well:
> https://lore.kernel.org/all/CAMi1Hd2Sngya_2m2odkjq4fdV8OiiXsFMEX1bb807cWMC7H-sg@mail.gmail.com/
> I can confirm that if I cherry-pick the rest of the patches from the
> series then I can't reproduce this crash, but I'm not sure when the rest
> of the patches are going to land though.
>
> Signed-off-by: Amit Pundir <[email protected]>
> ---
> arch/arm64/boot/dts/qcom/sm8250.dtsi | 105 ---------------------------
> 1 file changed, 105 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> index a5b62cadb129..a2c15da1a450 100644
> --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> @@ -101,8 +101,6 @@ CPU0: cpu@0 {
> capacity-dmips-mhz = <448>;
> dynamic-power-coefficient = <205>;
> next-level-cache = <&L2_0>;
> - power-domains = <&CPU_PD0>;
> - power-domain-names = "psci";
> qcom,freq-domain = <&cpufreq_hw 0>;
> operating-points-v2 = <&cpu0_opp_table>;
> interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>,
> @@ -125,8 +123,6 @@ CPU1: cpu@100 {
> capacity-dmips-mhz = <448>;
> dynamic-power-coefficient = <205>;
> next-level-cache = <&L2_100>;
> - power-domains = <&CPU_PD1>;
> - power-domain-names = "psci";
> qcom,freq-domain = <&cpufreq_hw 0>;
> operating-points-v2 = <&cpu0_opp_table>;
> interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>,
> @@ -146,8 +142,6 @@ CPU2: cpu@200 {
> capacity-dmips-mhz = <448>;
> dynamic-power-coefficient = <205>;
> next-level-cache = <&L2_200>;
> - power-domains = <&CPU_PD2>;
> - power-domain-names = "psci";
> qcom,freq-domain = <&cpufreq_hw 0>;
> operating-points-v2 = <&cpu0_opp_table>;
> interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>,
> @@ -167,8 +161,6 @@ CPU3: cpu@300 {
> capacity-dmips-mhz = <448>;
> dynamic-power-coefficient = <205>;
> next-level-cache = <&L2_300>;
> - power-domains = <&CPU_PD3>;
> - power-domain-names = "psci";
> qcom,freq-domain = <&cpufreq_hw 0>;
> operating-points-v2 = <&cpu0_opp_table>;
> interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>,
> @@ -188,8 +180,6 @@ CPU4: cpu@400 {
> capacity-dmips-mhz = <1024>;
> dynamic-power-coefficient = <379>;
> next-level-cache = <&L2_400>;
> - power-domains = <&CPU_PD4>;
> - power-domain-names = "psci";
> qcom,freq-domain = <&cpufreq_hw 1>;
> operating-points-v2 = <&cpu4_opp_table>;
> interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>,
> @@ -209,8 +199,6 @@ CPU5: cpu@500 {
> capacity-dmips-mhz = <1024>;
> dynamic-power-coefficient = <379>;
> next-level-cache = <&L2_500>;
> - power-domains = <&CPU_PD5>;
> - power-domain-names = "psci";
> qcom,freq-domain = <&cpufreq_hw 1>;
> operating-points-v2 = <&cpu4_opp_table>;
> interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>,
> @@ -231,8 +219,6 @@ CPU6: cpu@600 {
> capacity-dmips-mhz = <1024>;
> dynamic-power-coefficient = <379>;
> next-level-cache = <&L2_600>;
> - power-domains = <&CPU_PD6>;
> - power-domain-names = "psci";
> qcom,freq-domain = <&cpufreq_hw 1>;
> operating-points-v2 = <&cpu4_opp_table>;
> interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>,
> @@ -252,8 +238,6 @@ CPU7: cpu@700 {
> capacity-dmips-mhz = <1024>;
> dynamic-power-coefficient = <444>;
> next-level-cache = <&L2_700>;
> - power-domains = <&CPU_PD7>;
> - power-domain-names = "psci";
> qcom,freq-domain = <&cpufreq_hw 2>;
> operating-points-v2 = <&cpu7_opp_table>;
> interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>,
> @@ -300,42 +284,6 @@ core7 {
> };
> };
> };
> -
> - idle-states {
> - entry-method = "psci";
> -
> - LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
> - compatible = "arm,idle-state";
> - idle-state-name = "silver-rail-power-collapse";
> - arm,psci-suspend-param = <0x40000004>;
> - entry-latency-us = <360>;
> - exit-latency-us = <531>;
> - min-residency-us = <3934>;
> - local-timer-stop;
If this is temporary fix for some broke firmware or setup, I suggest to
just add status = "disabled" for these states. Also worth checking if keeping
the cpu states is okay and only cluster state is the issue or everything
needs to be disabled. That way it would avoid the churn when re-enabling it.
--
Regards,
Sudeep
On Mon, 17 Oct 2022 at 22:17, Sudeep Holla <[email protected]> wrote:
>
> On Mon, Oct 17, 2022 at 10:10:05PM +0530, Amit Pundir wrote:
> > This reverts commit 32bc936d732171d48c9c8f96c4fa25ac3ed7e1c7.
> >
> > This patch was part of a patch series to add APSS RSC to
> > Cluster power domain
> > https://patchwork.kernel.org/project/linux-pm/cover/[email protected]/
> > but the rest of the patches in this series got NACKed and didn't land.
> >
> > These cpuidle states made RB5 (sm8250) highly unstable and I run into
> > following crash every now and then:
> >
> > [ T1] vreg_l11c_3p3: failed to enable: -ETIMEDOUT
> > [ T1] qcom-rpmh-regulator 18200000.rsc:pm8150l-rpmh-regulators: ldo11: devm_regulator_register() failed, ret=-110
> > [ T1] qcom-rpmh-regulator: probe of 18200000.rsc:pm8150l-rpmh-regulators failed with error -110
> >
> > I reported this breakage earlier this year as well:
> > https://lore.kernel.org/all/CAMi1Hd2Sngya_2m2odkjq4fdV8OiiXsFMEX1bb807cWMC7H-sg@mail.gmail.com/
> > I can confirm that if I cherry-pick the rest of the patches from the
> > series then I can't reproduce this crash, but I'm not sure when the rest
> > of the patches are going to land though.
I have been talking to Maulik (offlist) about re-posting the series,
but apparently she has been too busy to move this forward.
I assume a better option, than reverting, is to get the above series
merged. If I recall, there were only a few minor comments from me on
the genpd patch [1]. That said, let me help out and refresh the
series, I will do it asap!
> >
> > Signed-off-by: Amit Pundir <[email protected]>
> > ---
> > arch/arm64/boot/dts/qcom/sm8250.dtsi | 105 ---------------------------
> > 1 file changed, 105 deletions(-)
> >
> > diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> > index a5b62cadb129..a2c15da1a450 100644
> > --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
> > +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> > @@ -101,8 +101,6 @@ CPU0: cpu@0 {
> > capacity-dmips-mhz = <448>;
> > dynamic-power-coefficient = <205>;
> > next-level-cache = <&L2_0>;
> > - power-domains = <&CPU_PD0>;
> > - power-domain-names = "psci";
> > qcom,freq-domain = <&cpufreq_hw 0>;
> > operating-points-v2 = <&cpu0_opp_table>;
> > interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>,
> > @@ -125,8 +123,6 @@ CPU1: cpu@100 {
> > capacity-dmips-mhz = <448>;
> > dynamic-power-coefficient = <205>;
> > next-level-cache = <&L2_100>;
> > - power-domains = <&CPU_PD1>;
> > - power-domain-names = "psci";
> > qcom,freq-domain = <&cpufreq_hw 0>;
> > operating-points-v2 = <&cpu0_opp_table>;
> > interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>,
> > @@ -146,8 +142,6 @@ CPU2: cpu@200 {
> > capacity-dmips-mhz = <448>;
> > dynamic-power-coefficient = <205>;
> > next-level-cache = <&L2_200>;
> > - power-domains = <&CPU_PD2>;
> > - power-domain-names = "psci";
> > qcom,freq-domain = <&cpufreq_hw 0>;
> > operating-points-v2 = <&cpu0_opp_table>;
> > interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>,
> > @@ -167,8 +161,6 @@ CPU3: cpu@300 {
> > capacity-dmips-mhz = <448>;
> > dynamic-power-coefficient = <205>;
> > next-level-cache = <&L2_300>;
> > - power-domains = <&CPU_PD3>;
> > - power-domain-names = "psci";
> > qcom,freq-domain = <&cpufreq_hw 0>;
> > operating-points-v2 = <&cpu0_opp_table>;
> > interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>,
> > @@ -188,8 +180,6 @@ CPU4: cpu@400 {
> > capacity-dmips-mhz = <1024>;
> > dynamic-power-coefficient = <379>;
> > next-level-cache = <&L2_400>;
> > - power-domains = <&CPU_PD4>;
> > - power-domain-names = "psci";
> > qcom,freq-domain = <&cpufreq_hw 1>;
> > operating-points-v2 = <&cpu4_opp_table>;
> > interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>,
> > @@ -209,8 +199,6 @@ CPU5: cpu@500 {
> > capacity-dmips-mhz = <1024>;
> > dynamic-power-coefficient = <379>;
> > next-level-cache = <&L2_500>;
> > - power-domains = <&CPU_PD5>;
> > - power-domain-names = "psci";
> > qcom,freq-domain = <&cpufreq_hw 1>;
> > operating-points-v2 = <&cpu4_opp_table>;
> > interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>,
> > @@ -231,8 +219,6 @@ CPU6: cpu@600 {
> > capacity-dmips-mhz = <1024>;
> > dynamic-power-coefficient = <379>;
> > next-level-cache = <&L2_600>;
> > - power-domains = <&CPU_PD6>;
> > - power-domain-names = "psci";
> > qcom,freq-domain = <&cpufreq_hw 1>;
> > operating-points-v2 = <&cpu4_opp_table>;
> > interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>,
> > @@ -252,8 +238,6 @@ CPU7: cpu@700 {
> > capacity-dmips-mhz = <1024>;
> > dynamic-power-coefficient = <444>;
> > next-level-cache = <&L2_700>;
> > - power-domains = <&CPU_PD7>;
> > - power-domain-names = "psci";
> > qcom,freq-domain = <&cpufreq_hw 2>;
> > operating-points-v2 = <&cpu7_opp_table>;
> > interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>,
> > @@ -300,42 +284,6 @@ core7 {
> > };
> > };
> > };
> > -
> > - idle-states {
> > - entry-method = "psci";
> > -
> > - LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
> > - compatible = "arm,idle-state";
> > - idle-state-name = "silver-rail-power-collapse";
> > - arm,psci-suspend-param = <0x40000004>;
> > - entry-latency-us = <360>;
> > - exit-latency-us = <531>;
> > - min-residency-us = <3934>;
> > - local-timer-stop;
>
> If this is temporary fix for some broke firmware or setup, I suggest to
> just add status = "disabled" for these states. Also worth checking if keeping
> the cpu states is okay and only cluster state is the issue or everything
> needs to be disabled. That way it would avoid the churn when re-enabling it.
That's a good option, unless we can get the other series (that fixes
this issue) merged soon. As stated, I will help to re-spin it and then
we can take it from there.
>
> --
> Regards,
> Sudeep
Kind regards
Uffe
On Tue, 18 Oct 2022 at 16:00, Ulf Hansson <[email protected]> wrote:
>
> On Mon, 17 Oct 2022 at 22:17, Sudeep Holla <[email protected]> wrote:
> >
> > On Mon, Oct 17, 2022 at 10:10:05PM +0530, Amit Pundir wrote:
> > > This reverts commit 32bc936d732171d48c9c8f96c4fa25ac3ed7e1c7.
> > >
> > > This patch was part of a patch series to add APSS RSC to
> > > Cluster power domain
> > > https://patchwork.kernel.org/project/linux-pm/cover/[email protected]/
> > > but the rest of the patches in this series got NACKed and didn't land.
> > >
> > > These cpuidle states made RB5 (sm8250) highly unstable and I run into
> > > following crash every now and then:
> > >
> > > [ T1] vreg_l11c_3p3: failed to enable: -ETIMEDOUT
> > > [ T1] qcom-rpmh-regulator 18200000.rsc:pm8150l-rpmh-regulators: ldo11: devm_regulator_register() failed, ret=-110
> > > [ T1] qcom-rpmh-regulator: probe of 18200000.rsc:pm8150l-rpmh-regulators failed with error -110
> > >
> > > I reported this breakage earlier this year as well:
> > > https://lore.kernel.org/all/CAMi1Hd2Sngya_2m2odkjq4fdV8OiiXsFMEX1bb807cWMC7H-sg@mail.gmail.com/
> > > I can confirm that if I cherry-pick the rest of the patches from the
> > > series then I can't reproduce this crash, but I'm not sure when the rest
> > > of the patches are going to land though.
>
> I have been talking to Maulik (offlist) about re-posting the series,
> but apparently she has been too busy to move this forward.
>
> I assume a better option, than reverting, is to get the above series
> merged. If I recall, there were only a few minor comments from me on
> the genpd patch [1]. That said, let me help out and refresh the
> series, I will do it asap!
>
> > >
> > > Signed-off-by: Amit Pundir <[email protected]>
> > > ---
> > > arch/arm64/boot/dts/qcom/sm8250.dtsi | 105 ---------------------------
> > > 1 file changed, 105 deletions(-)
> > >
> > > diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> > > index a5b62cadb129..a2c15da1a450 100644
> > > --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
> > > +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> > > @@ -101,8 +101,6 @@ CPU0: cpu@0 {
> > > capacity-dmips-mhz = <448>;
> > > dynamic-power-coefficient = <205>;
> > > next-level-cache = <&L2_0>;
> > > - power-domains = <&CPU_PD0>;
> > > - power-domain-names = "psci";
> > > qcom,freq-domain = <&cpufreq_hw 0>;
> > > operating-points-v2 = <&cpu0_opp_table>;
> > > interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>,
> > > @@ -125,8 +123,6 @@ CPU1: cpu@100 {
> > > capacity-dmips-mhz = <448>;
> > > dynamic-power-coefficient = <205>;
> > > next-level-cache = <&L2_100>;
> > > - power-domains = <&CPU_PD1>;
> > > - power-domain-names = "psci";
> > > qcom,freq-domain = <&cpufreq_hw 0>;
> > > operating-points-v2 = <&cpu0_opp_table>;
> > > interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>,
> > > @@ -146,8 +142,6 @@ CPU2: cpu@200 {
> > > capacity-dmips-mhz = <448>;
> > > dynamic-power-coefficient = <205>;
> > > next-level-cache = <&L2_200>;
> > > - power-domains = <&CPU_PD2>;
> > > - power-domain-names = "psci";
> > > qcom,freq-domain = <&cpufreq_hw 0>;
> > > operating-points-v2 = <&cpu0_opp_table>;
> > > interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>,
> > > @@ -167,8 +161,6 @@ CPU3: cpu@300 {
> > > capacity-dmips-mhz = <448>;
> > > dynamic-power-coefficient = <205>;
> > > next-level-cache = <&L2_300>;
> > > - power-domains = <&CPU_PD3>;
> > > - power-domain-names = "psci";
> > > qcom,freq-domain = <&cpufreq_hw 0>;
> > > operating-points-v2 = <&cpu0_opp_table>;
> > > interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>,
> > > @@ -188,8 +180,6 @@ CPU4: cpu@400 {
> > > capacity-dmips-mhz = <1024>;
> > > dynamic-power-coefficient = <379>;
> > > next-level-cache = <&L2_400>;
> > > - power-domains = <&CPU_PD4>;
> > > - power-domain-names = "psci";
> > > qcom,freq-domain = <&cpufreq_hw 1>;
> > > operating-points-v2 = <&cpu4_opp_table>;
> > > interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>,
> > > @@ -209,8 +199,6 @@ CPU5: cpu@500 {
> > > capacity-dmips-mhz = <1024>;
> > > dynamic-power-coefficient = <379>;
> > > next-level-cache = <&L2_500>;
> > > - power-domains = <&CPU_PD5>;
> > > - power-domain-names = "psci";
> > > qcom,freq-domain = <&cpufreq_hw 1>;
> > > operating-points-v2 = <&cpu4_opp_table>;
> > > interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>,
> > > @@ -231,8 +219,6 @@ CPU6: cpu@600 {
> > > capacity-dmips-mhz = <1024>;
> > > dynamic-power-coefficient = <379>;
> > > next-level-cache = <&L2_600>;
> > > - power-domains = <&CPU_PD6>;
> > > - power-domain-names = "psci";
> > > qcom,freq-domain = <&cpufreq_hw 1>;
> > > operating-points-v2 = <&cpu4_opp_table>;
> > > interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>,
> > > @@ -252,8 +238,6 @@ CPU7: cpu@700 {
> > > capacity-dmips-mhz = <1024>;
> > > dynamic-power-coefficient = <444>;
> > > next-level-cache = <&L2_700>;
> > > - power-domains = <&CPU_PD7>;
> > > - power-domain-names = "psci";
> > > qcom,freq-domain = <&cpufreq_hw 2>;
> > > operating-points-v2 = <&cpu7_opp_table>;
> > > interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>,
> > > @@ -300,42 +284,6 @@ core7 {
> > > };
> > > };
> > > };
> > > -
> > > - idle-states {
> > > - entry-method = "psci";
> > > -
> > > - LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
> > > - compatible = "arm,idle-state";
> > > - idle-state-name = "silver-rail-power-collapse";
> > > - arm,psci-suspend-param = <0x40000004>;
> > > - entry-latency-us = <360>;
> > > - exit-latency-us = <531>;
> > > - min-residency-us = <3934>;
> > > - local-timer-stop;
> >
> > If this is temporary fix for some broke firmware or setup, I suggest to
> > just add status = "disabled" for these states. Also worth checking if keeping
> > the cpu states is okay and only cluster state is the issue or everything
> > needs to be disabled. That way it would avoid the churn when re-enabling it.
>
> That's a good option, unless we can get the other series (that fixes
> this issue) merged soon. As stated, I will help to re-spin it and then
> we can take it from there.
Hi Ulf, I just verified over multiple reboots that disabling the
cpuidle states, as suggested by Sudeep, does the trick and I no longer
see the crash.
Do you suggest we wait for the re-spin of the other series or should I
go ahead and submit that RB5 workaround for the time being?
Regards,
Amit Pundir
>
> >
> > --
> > Regards,
> > Sudeep
>
> Kind regards
> Uffe
On Tue, 18 Oct 2022 at 16:09, Amit Pundir <[email protected]> wrote:
>
> On Tue, 18 Oct 2022 at 16:00, Ulf Hansson <[email protected]> wrote:
> >
> > On Mon, 17 Oct 2022 at 22:17, Sudeep Holla <[email protected]> wrote:
> > >
> > > On Mon, Oct 17, 2022 at 10:10:05PM +0530, Amit Pundir wrote:
> > > > This reverts commit 32bc936d732171d48c9c8f96c4fa25ac3ed7e1c7.
> > > >
> > > > This patch was part of a patch series to add APSS RSC to
> > > > Cluster power domain
> > > > https://patchwork.kernel.org/project/linux-pm/cover/[email protected]/
> > > > but the rest of the patches in this series got NACKed and didn't land.
> > > >
> > > > These cpuidle states made RB5 (sm8250) highly unstable and I run into
> > > > following crash every now and then:
> > > >
> > > > [ T1] vreg_l11c_3p3: failed to enable: -ETIMEDOUT
> > > > [ T1] qcom-rpmh-regulator 18200000.rsc:pm8150l-rpmh-regulators: ldo11: devm_regulator_register() failed, ret=-110
> > > > [ T1] qcom-rpmh-regulator: probe of 18200000.rsc:pm8150l-rpmh-regulators failed with error -110
> > > >
> > > > I reported this breakage earlier this year as well:
> > > > https://lore.kernel.org/all/CAMi1Hd2Sngya_2m2odkjq4fdV8OiiXsFMEX1bb807cWMC7H-sg@mail.gmail.com/
> > > > I can confirm that if I cherry-pick the rest of the patches from the
> > > > series then I can't reproduce this crash, but I'm not sure when the rest
> > > > of the patches are going to land though.
> >
> > I have been talking to Maulik (offlist) about re-posting the series,
> > but apparently she has been too busy to move this forward.
> >
> > I assume a better option, than reverting, is to get the above series
> > merged. If I recall, there were only a few minor comments from me on
> > the genpd patch [1]. That said, let me help out and refresh the
> > series, I will do it asap!
> >
> > > >
> > > > Signed-off-by: Amit Pundir <[email protected]>
> > > > ---
> > > > arch/arm64/boot/dts/qcom/sm8250.dtsi | 105 ---------------------------
> > > > 1 file changed, 105 deletions(-)
> > > >
> > > > diff --git a/arch/arm64/boot/dts/qcom/sm8250.dtsi b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> > > > index a5b62cadb129..a2c15da1a450 100644
> > > > --- a/arch/arm64/boot/dts/qcom/sm8250.dtsi
> > > > +++ b/arch/arm64/boot/dts/qcom/sm8250.dtsi
> > > > @@ -101,8 +101,6 @@ CPU0: cpu@0 {
> > > > capacity-dmips-mhz = <448>;
> > > > dynamic-power-coefficient = <205>;
> > > > next-level-cache = <&L2_0>;
> > > > - power-domains = <&CPU_PD0>;
> > > > - power-domain-names = "psci";
> > > > qcom,freq-domain = <&cpufreq_hw 0>;
> > > > operating-points-v2 = <&cpu0_opp_table>;
> > > > interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>,
> > > > @@ -125,8 +123,6 @@ CPU1: cpu@100 {
> > > > capacity-dmips-mhz = <448>;
> > > > dynamic-power-coefficient = <205>;
> > > > next-level-cache = <&L2_100>;
> > > > - power-domains = <&CPU_PD1>;
> > > > - power-domain-names = "psci";
> > > > qcom,freq-domain = <&cpufreq_hw 0>;
> > > > operating-points-v2 = <&cpu0_opp_table>;
> > > > interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>,
> > > > @@ -146,8 +142,6 @@ CPU2: cpu@200 {
> > > > capacity-dmips-mhz = <448>;
> > > > dynamic-power-coefficient = <205>;
> > > > next-level-cache = <&L2_200>;
> > > > - power-domains = <&CPU_PD2>;
> > > > - power-domain-names = "psci";
> > > > qcom,freq-domain = <&cpufreq_hw 0>;
> > > > operating-points-v2 = <&cpu0_opp_table>;
> > > > interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>,
> > > > @@ -167,8 +161,6 @@ CPU3: cpu@300 {
> > > > capacity-dmips-mhz = <448>;
> > > > dynamic-power-coefficient = <205>;
> > > > next-level-cache = <&L2_300>;
> > > > - power-domains = <&CPU_PD3>;
> > > > - power-domain-names = "psci";
> > > > qcom,freq-domain = <&cpufreq_hw 0>;
> > > > operating-points-v2 = <&cpu0_opp_table>;
> > > > interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>,
> > > > @@ -188,8 +180,6 @@ CPU4: cpu@400 {
> > > > capacity-dmips-mhz = <1024>;
> > > > dynamic-power-coefficient = <379>;
> > > > next-level-cache = <&L2_400>;
> > > > - power-domains = <&CPU_PD4>;
> > > > - power-domain-names = "psci";
> > > > qcom,freq-domain = <&cpufreq_hw 1>;
> > > > operating-points-v2 = <&cpu4_opp_table>;
> > > > interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>,
> > > > @@ -209,8 +199,6 @@ CPU5: cpu@500 {
> > > > capacity-dmips-mhz = <1024>;
> > > > dynamic-power-coefficient = <379>;
> > > > next-level-cache = <&L2_500>;
> > > > - power-domains = <&CPU_PD5>;
> > > > - power-domain-names = "psci";
> > > > qcom,freq-domain = <&cpufreq_hw 1>;
> > > > operating-points-v2 = <&cpu4_opp_table>;
> > > > interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>,
> > > > @@ -231,8 +219,6 @@ CPU6: cpu@600 {
> > > > capacity-dmips-mhz = <1024>;
> > > > dynamic-power-coefficient = <379>;
> > > > next-level-cache = <&L2_600>;
> > > > - power-domains = <&CPU_PD6>;
> > > > - power-domain-names = "psci";
> > > > qcom,freq-domain = <&cpufreq_hw 1>;
> > > > operating-points-v2 = <&cpu4_opp_table>;
> > > > interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>,
> > > > @@ -252,8 +238,6 @@ CPU7: cpu@700 {
> > > > capacity-dmips-mhz = <1024>;
> > > > dynamic-power-coefficient = <444>;
> > > > next-level-cache = <&L2_700>;
> > > > - power-domains = <&CPU_PD7>;
> > > > - power-domain-names = "psci";
> > > > qcom,freq-domain = <&cpufreq_hw 2>;
> > > > operating-points-v2 = <&cpu7_opp_table>;
> > > > interconnects = <&gem_noc MASTER_AMPSS_M0 &mc_virt SLAVE_EBI_CH0>,
> > > > @@ -300,42 +284,6 @@ core7 {
> > > > };
> > > > };
> > > > };
> > > > -
> > > > - idle-states {
> > > > - entry-method = "psci";
> > > > -
> > > > - LITTLE_CPU_SLEEP_0: cpu-sleep-0-0 {
> > > > - compatible = "arm,idle-state";
> > > > - idle-state-name = "silver-rail-power-collapse";
> > > > - arm,psci-suspend-param = <0x40000004>;
> > > > - entry-latency-us = <360>;
> > > > - exit-latency-us = <531>;
> > > > - min-residency-us = <3934>;
> > > > - local-timer-stop;
> > >
> > > If this is temporary fix for some broke firmware or setup, I suggest to
> > > just add status = "disabled" for these states. Also worth checking if keeping
> > > the cpu states is okay and only cluster state is the issue or everything
> > > needs to be disabled. That way it would avoid the churn when re-enabling it.
> >
> > That's a good option, unless we can get the other series (that fixes
> > this issue) merged soon. As stated, I will help to re-spin it and then
> > we can take it from there.
>
> Hi Ulf, I just verified over multiple reboots that disabling the
> cpuidle states, as suggested by Sudeep, does the trick and I no longer
> see the crash.
>
> Do you suggest we wait for the re-spin of the other series or should I
> go ahead and submit that RB5 workaround for the time being?
Yes, that seems like a good idea as the problem needs an easy fix for
6.1 and earlier. Please keep me posted.
In the meantime, I will re-spin and submit the series that fixes the
problem correctly, but let's target that series for 6.2.
Kind regards
Uffe