Read dma-channel-mask from device tree and register only the
specified channels. This is useful to reserve some channels for the
firmware.
Also update the channel number and interrupts to include all 32
channels. The current driver was using only 31 channels as one
channel was reserved for firmware. Now with this change, the driver
can align more to the actual hardware.
v1->v2:
* Reversed the operands and used BIT macro in 'if' condition.
* Fixed warning reported-by: kernel test robot <[email protected]>
Akhil R (3):
dt-bindings: dmaengine: Add dma-channel-mask to Tegra GPCDMA
arm64: tegra: Add dma-channel-mask in GPCDMA node
dmaengine: tegra: Add support for dma-channel-mask
.../bindings/dma/nvidia,tegra186-gpc-dma.yaml | 7 +++-
arch/arm64/boot/dts/nvidia/tegra186.dtsi | 4 +-
arch/arm64/boot/dts/nvidia/tegra194.dtsi | 4 +-
arch/arm64/boot/dts/nvidia/tegra234.dtsi | 4 +-
drivers/dma/tegra186-gpc-dma.c | 37 +++++++++++++++----
5 files changed, 45 insertions(+), 11 deletions(-)
--
2.17.1