This is an enhancement which allows to specify the default driver
parameters among the module parameters.
Adding default variables to the speakup_acntpc.c and speakup_acntsa.c
module allows to easily set that at boot, rather than
setting the sys variables after boot.
More details can be found here:
https://github.com/linux-speakup/speakup/issues/7
Signed-off-by: Osama Muhammad <[email protected]>
---
.../accessibility/speakup/speakup_acntpc.c | 38 +++++++++++++++----
.../accessibility/speakup/speakup_acntsa.c | 37 ++++++++++++++----
2 files changed, 59 insertions(+), 16 deletions(-)
diff --git a/drivers/accessibility/speakup/speakup_acntpc.c b/drivers/accessibility/speakup/speakup_acntpc.c
index a55b60754eb1..a27e6bbf05da 100644
--- a/drivers/accessibility/speakup/speakup_acntpc.c
+++ b/drivers/accessibility/speakup/speakup_acntpc.c
@@ -34,14 +34,23 @@ static int synth_port_control;
static int port_forced;
static unsigned int synth_portlist[] = { 0x2a8, 0 };
-static struct var_t vars[] = {
- { CAPS_START, .u.s = {"\033P8" } },
- { CAPS_STOP, .u.s = {"\033P5" } },
- { RATE, .u.n = {"\033R%c", 9, 0, 17, 0, 0, "0123456789abcdefgh" } },
- { PITCH, .u.n = {"\033P%d", 5, 0, 9, 0, 0, NULL } },
- { VOL, .u.n = {"\033A%d", 5, 0, 9, 0, 0, NULL } },
- { TONE, .u.n = {"\033V%d", 5, 0, 9, 0, 0, NULL } },
- { DIRECT, .u.n = {NULL, 0, 0, 1, 0, 0, NULL } },
+enum default_vars_id {
+ CAPS_START_ID = 0, CAPS_STOP_ID,
+ RATE_ID, PITCH_ID,
+ VOL_ID, TONE_ID,
+ DIRECT_ID, V_LAST_VAR_ID,
+ NB_ID
+};
+
+
+static struct var_t vars[NB_ID] = {
+ [CAPS_START_ID] = { CAPS_START, .u.s = {"\033P8" } },
+ [CAPS_STOP_ID] = { CAPS_STOP, .u.s = {"\033P5" } },
+ [RATE_ID] = { RATE, .u.n = {"\033R%c", 9, 0, 17, 0, 0, "0123456789abcdefgh" } },
+ [PITCH_ID] = { PITCH, .u.n = {"\033P%d", 5, 0, 9, 0, 0, NULL } },
+ [VOL_ID] = { VOL, .u.n = {"\033A%d", 5, 0, 9, 0, 0, NULL } },
+ [TONE_ID] = { TONE, .u.n = {"\033V%d", 5, 0, 9, 0, 0, NULL } },
+ [DIRECT_ID] = { DIRECT, .u.n = {NULL, 0, 0, 1, 0, 0, NULL } },
V_LAST_VAR
};
@@ -305,9 +314,22 @@ static void accent_release(struct spk_synth *synth)
module_param_hw_named(port, port_forced, int, ioport, 0444);
module_param_named(start, synth_acntpc.startup, short, 0444);
+module_param_named(rate, vars[RATE_ID].u.n.default_val, int, 0444);
+module_param_named(pitch, vars[PITCH_ID].u.n.default_val, int, 0444);
+module_param_named(vol, vars[VOL_ID].u.n.default_val, int, 0444);
+module_param_named(tone, vars[TONE_ID].u.n.default_val, int, 0444);
+module_param_named(direct, vars[DIRECT_ID].u.n.default_val, int, 0444);
+
+
MODULE_PARM_DESC(port, "Set the port for the synthesizer (override probing).");
MODULE_PARM_DESC(start, "Start the synthesizer once it is loaded.");
+MODULE_PARM_DESC(rate, "Set the rate variable on load.");
+MODULE_PARM_DESC(pitch, "Set the pitch variable on load.");
+MODULE_PARM_DESC(vol, "Set the vol variable on load.");
+MODULE_PARM_DESC(tone, "Set the tone variable on load.");
+MODULE_PARM_DESC(direct, "Set the direct variable on load.");
+
module_spk_synth(synth_acntpc);
diff --git a/drivers/accessibility/speakup/speakup_acntsa.c b/drivers/accessibility/speakup/speakup_acntsa.c
index 2697c51ed6b5..26bb9f9399d3 100644
--- a/drivers/accessibility/speakup/speakup_acntsa.c
+++ b/drivers/accessibility/speakup/speakup_acntsa.c
@@ -19,14 +19,24 @@
static int synth_probe(struct spk_synth *synth);
-static struct var_t vars[] = {
- { CAPS_START, .u.s = {"\033P8" } },
- { CAPS_STOP, .u.s = {"\033P5" } },
- { RATE, .u.n = {"\033R%c", 9, 0, 17, 0, 0, "0123456789abcdefgh" } },
- { PITCH, .u.n = {"\033P%d", 5, 0, 9, 0, 0, NULL } },
- { VOL, .u.n = {"\033A%d", 9, 0, 9, 0, 0, NULL } },
- { TONE, .u.n = {"\033V%d", 5, 0, 9, 0, 0, NULL } },
- { DIRECT, .u.n = {NULL, 0, 0, 1, 0, 0, NULL } },
+
+enum default_vars_id {
+ CAPS_START_ID = 0, CAPS_STOP_ID,
+ RATE_ID, PITCH_ID,
+ VOL_ID, TONE_ID,
+ DIRECT_ID, V_LAST_VAR_ID,
+ NB_ID
+};
+
+
+static struct var_t vars[NB_ID] = {
+ [CAPS_START_ID] = { CAPS_START, .u.s = {"\033P8" } },
+ [CAPS_STOP_ID] = { CAPS_STOP, .u.s = {"\033P5" } },
+ [RATE_ID] = { RATE, .u.n = {"\033R%c", 9, 0, 17, 0, 0, "0123456789abcdefgh" } },
+ [PITCH_ID] = { PITCH, .u.n = {"\033P%d", 5, 0, 9, 0, 0, NULL } },
+ [VOL_ID] = { VOL, .u.n = {"\033A%d", 9, 0, 9, 0, 0, NULL } },
+ [TONE_ID] = { TONE, .u.n = {"\033V%d", 5, 0, 9, 0, 0, NULL } },
+ [DIRECT_ID] = { DIRECT, .u.n = {NULL, 0, 0, 1, 0, 0, NULL } },
V_LAST_VAR
};
@@ -129,10 +139,21 @@ static int synth_probe(struct spk_synth *synth)
module_param_named(ser, synth_acntsa.ser, int, 0444);
module_param_named(dev, synth_acntsa.dev_name, charp, 0444);
module_param_named(start, synth_acntsa.startup, short, 0444);
+module_param_named(rate, vars[RATE_ID].u.n.default_val, int, 0444);
+module_param_named(pitch, vars[PITCH_ID].u.n.default_val, int, 0444);
+module_param_named(vol, vars[VOL_ID].u.n.default_val, int, 0444);
+module_param_named(tone, vars[TONE_ID].u.n.default_val, int, 0444);
+module_param_named(direct, vars[DIRECT_ID].u.n.default_val, int, 0444);
MODULE_PARM_DESC(ser, "Set the serial port for the synthesizer (0-based).");
MODULE_PARM_DESC(dev, "Set the device e.g. ttyUSB0, for the synthesizer.");
MODULE_PARM_DESC(start, "Start the synthesizer once it is loaded.");
+MODULE_PARM_DESC(rate, "Set the rate variable on load.");
+MODULE_PARM_DESC(pitch, "Set the pitch variable on load.");
+MODULE_PARM_DESC(vol, "Set the vol variable on load.");
+MODULE_PARM_DESC(tone, "Set the tone variable on load.");
+MODULE_PARM_DESC(direct, "Set the direct variable on load.");
+
module_spk_synth(synth_acntsa);
--
2.25.1
Osama Muhammad, le mer. 19 oct. 2022 01:33:08 +0500, a ecrit:
> This is an enhancement which allows to specify the default driver
> parameters among the module parameters.
>
> Adding default variables to the speakup_acntpc.c and speakup_acntsa.c
> module allows to easily set that at boot, rather than
> setting the sys variables after boot.
> More details can be found here:
> https://github.com/linux-speakup/speakup/issues/7
>
> Signed-off-by: Osama Muhammad <[email protected]>
Reviewed-by: Samuel Thibault <[email protected]>
> ---
> .../accessibility/speakup/speakup_acntpc.c | 38 +++++++++++++++----
> .../accessibility/speakup/speakup_acntsa.c | 37 ++++++++++++++----
> 2 files changed, 59 insertions(+), 16 deletions(-)
>
> diff --git a/drivers/accessibility/speakup/speakup_acntpc.c b/drivers/accessibility/speakup/speakup_acntpc.c
> index a55b60754eb1..a27e6bbf05da 100644
> --- a/drivers/accessibility/speakup/speakup_acntpc.c
> +++ b/drivers/accessibility/speakup/speakup_acntpc.c
> @@ -34,14 +34,23 @@ static int synth_port_control;
> static int port_forced;
> static unsigned int synth_portlist[] = { 0x2a8, 0 };
>
> -static struct var_t vars[] = {
> - { CAPS_START, .u.s = {"\033P8" } },
> - { CAPS_STOP, .u.s = {"\033P5" } },
> - { RATE, .u.n = {"\033R%c", 9, 0, 17, 0, 0, "0123456789abcdefgh" } },
> - { PITCH, .u.n = {"\033P%d", 5, 0, 9, 0, 0, NULL } },
> - { VOL, .u.n = {"\033A%d", 5, 0, 9, 0, 0, NULL } },
> - { TONE, .u.n = {"\033V%d", 5, 0, 9, 0, 0, NULL } },
> - { DIRECT, .u.n = {NULL, 0, 0, 1, 0, 0, NULL } },
> +enum default_vars_id {
> + CAPS_START_ID = 0, CAPS_STOP_ID,
> + RATE_ID, PITCH_ID,
> + VOL_ID, TONE_ID,
> + DIRECT_ID, V_LAST_VAR_ID,
> + NB_ID
> +};
> +
> +
> +static struct var_t vars[NB_ID] = {
> + [CAPS_START_ID] = { CAPS_START, .u.s = {"\033P8" } },
> + [CAPS_STOP_ID] = { CAPS_STOP, .u.s = {"\033P5" } },
> + [RATE_ID] = { RATE, .u.n = {"\033R%c", 9, 0, 17, 0, 0, "0123456789abcdefgh" } },
> + [PITCH_ID] = { PITCH, .u.n = {"\033P%d", 5, 0, 9, 0, 0, NULL } },
> + [VOL_ID] = { VOL, .u.n = {"\033A%d", 5, 0, 9, 0, 0, NULL } },
> + [TONE_ID] = { TONE, .u.n = {"\033V%d", 5, 0, 9, 0, 0, NULL } },
> + [DIRECT_ID] = { DIRECT, .u.n = {NULL, 0, 0, 1, 0, 0, NULL } },
> V_LAST_VAR
> };
>
> @@ -305,9 +314,22 @@ static void accent_release(struct spk_synth *synth)
>
> module_param_hw_named(port, port_forced, int, ioport, 0444);
> module_param_named(start, synth_acntpc.startup, short, 0444);
> +module_param_named(rate, vars[RATE_ID].u.n.default_val, int, 0444);
> +module_param_named(pitch, vars[PITCH_ID].u.n.default_val, int, 0444);
> +module_param_named(vol, vars[VOL_ID].u.n.default_val, int, 0444);
> +module_param_named(tone, vars[TONE_ID].u.n.default_val, int, 0444);
> +module_param_named(direct, vars[DIRECT_ID].u.n.default_val, int, 0444);
> +
> +
>
> MODULE_PARM_DESC(port, "Set the port for the synthesizer (override probing).");
> MODULE_PARM_DESC(start, "Start the synthesizer once it is loaded.");
> +MODULE_PARM_DESC(rate, "Set the rate variable on load.");
> +MODULE_PARM_DESC(pitch, "Set the pitch variable on load.");
> +MODULE_PARM_DESC(vol, "Set the vol variable on load.");
> +MODULE_PARM_DESC(tone, "Set the tone variable on load.");
> +MODULE_PARM_DESC(direct, "Set the direct variable on load.");
> +
>
> module_spk_synth(synth_acntpc);
>
> diff --git a/drivers/accessibility/speakup/speakup_acntsa.c b/drivers/accessibility/speakup/speakup_acntsa.c
> index 2697c51ed6b5..26bb9f9399d3 100644
> --- a/drivers/accessibility/speakup/speakup_acntsa.c
> +++ b/drivers/accessibility/speakup/speakup_acntsa.c
> @@ -19,14 +19,24 @@
>
> static int synth_probe(struct spk_synth *synth);
>
> -static struct var_t vars[] = {
> - { CAPS_START, .u.s = {"\033P8" } },
> - { CAPS_STOP, .u.s = {"\033P5" } },
> - { RATE, .u.n = {"\033R%c", 9, 0, 17, 0, 0, "0123456789abcdefgh" } },
> - { PITCH, .u.n = {"\033P%d", 5, 0, 9, 0, 0, NULL } },
> - { VOL, .u.n = {"\033A%d", 9, 0, 9, 0, 0, NULL } },
> - { TONE, .u.n = {"\033V%d", 5, 0, 9, 0, 0, NULL } },
> - { DIRECT, .u.n = {NULL, 0, 0, 1, 0, 0, NULL } },
> +
> +enum default_vars_id {
> + CAPS_START_ID = 0, CAPS_STOP_ID,
> + RATE_ID, PITCH_ID,
> + VOL_ID, TONE_ID,
> + DIRECT_ID, V_LAST_VAR_ID,
> + NB_ID
> +};
> +
> +
> +static struct var_t vars[NB_ID] = {
> + [CAPS_START_ID] = { CAPS_START, .u.s = {"\033P8" } },
> + [CAPS_STOP_ID] = { CAPS_STOP, .u.s = {"\033P5" } },
> + [RATE_ID] = { RATE, .u.n = {"\033R%c", 9, 0, 17, 0, 0, "0123456789abcdefgh" } },
> + [PITCH_ID] = { PITCH, .u.n = {"\033P%d", 5, 0, 9, 0, 0, NULL } },
> + [VOL_ID] = { VOL, .u.n = {"\033A%d", 9, 0, 9, 0, 0, NULL } },
> + [TONE_ID] = { TONE, .u.n = {"\033V%d", 5, 0, 9, 0, 0, NULL } },
> + [DIRECT_ID] = { DIRECT, .u.n = {NULL, 0, 0, 1, 0, 0, NULL } },
> V_LAST_VAR
> };
>
> @@ -129,10 +139,21 @@ static int synth_probe(struct spk_synth *synth)
> module_param_named(ser, synth_acntsa.ser, int, 0444);
> module_param_named(dev, synth_acntsa.dev_name, charp, 0444);
> module_param_named(start, synth_acntsa.startup, short, 0444);
> +module_param_named(rate, vars[RATE_ID].u.n.default_val, int, 0444);
> +module_param_named(pitch, vars[PITCH_ID].u.n.default_val, int, 0444);
> +module_param_named(vol, vars[VOL_ID].u.n.default_val, int, 0444);
> +module_param_named(tone, vars[TONE_ID].u.n.default_val, int, 0444);
> +module_param_named(direct, vars[DIRECT_ID].u.n.default_val, int, 0444);
>
> MODULE_PARM_DESC(ser, "Set the serial port for the synthesizer (0-based).");
> MODULE_PARM_DESC(dev, "Set the device e.g. ttyUSB0, for the synthesizer.");
> MODULE_PARM_DESC(start, "Start the synthesizer once it is loaded.");
> +MODULE_PARM_DESC(rate, "Set the rate variable on load.");
> +MODULE_PARM_DESC(pitch, "Set the pitch variable on load.");
> +MODULE_PARM_DESC(vol, "Set the vol variable on load.");
> +MODULE_PARM_DESC(tone, "Set the tone variable on load.");
> +MODULE_PARM_DESC(direct, "Set the direct variable on load.");
> +
>
> module_spk_synth(synth_acntsa);
>
> --
> 2.25.1
>