Vendor system has a separate checkbox for increasing brightness of the
backlight combined with a big warning that power consumption will
greatly increase. With that checkbox enabled there is a greater range in
which backlight brightness can be adjusted
Add a switch to achieve the same, since the backlight is actually LED,
this seems to be the most appopiate place to add it. Nothing fits
perfectly.
Signed-off-by: Andreas Kemnade <[email protected]>
---
arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts b/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts
index ea0ce59aa4f1..da1399057634 100644
--- a/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts
+++ b/arch/arm/boot/dts/imx6sl-tolino-shine2hd.dts
@@ -80,6 +80,12 @@ led-0 {
gpios = <&gpio5 13 GPIO_ACTIVE_LOW>;
linux,default-trigger = "timer";
};
+
+ led-1 {
+ label = "tolinoshine2hd:white:backlightboost";
+ gpios = <&gpio1 29 GPIO_ACTIVE_HIGH>;
+ linux,default-trigger = "off";
+ };
};
memory@80000000 {
@@ -404,7 +410,8 @@ MX6SL_PAD_REF_CLK_32K__I2C3_SDA 0x4001f8b1
pinctrl_led: ledgrp {
fsl,pins = <
- MX6SL_PAD_SD1_DAT2__GPIO5_IO13 0x17059
+ MX6SL_PAD_SD1_DAT2__GPIO5_IO13 0x17059
+ MX6SL_PAD_EPDC_SDCE2__GPIO1_IO29 0x17059
>;
};
--
2.30.2