This series introduces the Qualcomm sa8540p-ride automotive development
board, also called as Qdrive-3 board.
Change in v6:
- Introduced the new dts for the board, rather than moving common nodes
between this one and SA8295 ADP board into dtsi file(Bjorn)
- Drop 'adp' term to imply it being unrelated with ADP board(Internal
discussion with Bjorn)
- Removed Acked-by(Krzysztof) tag in dt-binding document, due to content
change.
- Not including Reviewed-by(Krzysztof), because of the content change.
Change in v5:
- Moved the usb and ufs nodes from sa8540p-adp.dtsi file to respective
board specific dts files: sa8295p-adp.dts and sa8540p-adp-ride.dts.
Took inputs from Shazad Hussain in this regard(John)
- Added more description of the board differences(John)
- Not including Reviewed-by for Krzysztof, because of the new changes to
be reviewed.
- Removed Reported-by tag(John).
Changes in v4:
- Removed the ufs_card_hc node, as it is not mounted on Qdrive-3 board.
- Removed usb_1 relared nodes, as usb1 doesn't have any port connected
on Qdrive3 board.
- Added Reported-by tag for Shazad(for ufs and usb_1 node removals)
Changes in v3:
- Added Acked-by tag (Krzysztof)
- Renamed dtsi to sa8540p-adp.dtsi (John)
- Removed copyright from sa8295-adp.dts and sa8295-adp.dtsi(John)
- Added cover letter
change in v2:
- Make dt-binding patch as the first one in the patch set
- Add , after year 2022, in the license header
Initial version:
- Move the common nodes to sa8540p-adp.dtsi, and create qrive-3 board
specific file sa8540p-adp-ride.dts.
Parikshit Pareek (2):
dt-bindings: arm: qcom: Document additional sa8540p device
arm64: dts: qcom: add SA8540P ride(Qdrive-3)
.../devicetree/bindings/arm/qcom.yaml | 1 +
arch/arm64/boot/dts/qcom/Makefile | 1 +
arch/arm64/boot/dts/qcom/sa8540p-ride.dts | 309 ++++++++++++++++++
3 files changed, 311 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/sa8540p-ride.dts
--
2.17.1