There is no point to enter safe mode during DP/TBT configuration
if the DP/TBT was already configured in mux. This is because safe
mode is only applicable when there is a need to reconfigure the
pins in order to avoid damage within/to port partner.
In some chrome systems, IOM/mux is already configured before OS
comes up. Thus, when driver is probed, it blindly enters safe
mode due to PD negotiations but only after gfx driver lowers
dp_phy_ownership, will the IOM complete safe mode and send an
ack to PMC.
Since, that never happens, we see IPC timeout.
Hence, allow safe mode only when pin reconfiguration is not
required, which makes sense.
Fixes: 43d596e32276 ("usb: typec: intel_pmc_mux: Check the port status before connect")
Signed-off-by: Rajat Khandelwal <[email protected]>
Signed-off-by: Lee Shawn C <[email protected]>
Reviewed-by: Heikki Krogerus <[email protected]>
---
v2:
1. Formatted the title
2. Incorporated the logic in pmc_usb_mux_safe_state
3. Bug fixes
4. Reviewed by
drivers/usb/typec/mux/intel_pmc_mux.c | 15 +++++++++++++--
1 file changed, 13 insertions(+), 2 deletions(-)
diff --git a/drivers/usb/typec/mux/intel_pmc_mux.c b/drivers/usb/typec/mux/intel_pmc_mux.c
index a8e273fe204a..795829ffe776 100644
--- a/drivers/usb/typec/mux/intel_pmc_mux.c
+++ b/drivers/usb/typec/mux/intel_pmc_mux.c
@@ -369,13 +369,24 @@ pmc_usb_mux_usb4(struct pmc_usb_port *port, struct typec_mux_state *state)
return pmc_usb_command(port, (void *)&req, sizeof(req));
}
-static int pmc_usb_mux_safe_state(struct pmc_usb_port *port)
+static int pmc_usb_mux_safe_state(struct pmc_usb_port *port,
+ struct typec_mux_state *state)
{
u8 msg;
if (IOM_PORT_ACTIVITY_IS(port->iom_status, SAFE_MODE))
return 0;
+ if ((IOM_PORT_ACTIVITY_IS(port->iom_status, DP) ||
+ IOM_PORT_ACTIVITY_IS(port->iom_status, DP_MFD)) &&
+ state->alt && state->alt->svid == USB_TYPEC_DP_SID)
+ return 0;
+
+ if ((IOM_PORT_ACTIVITY_IS(port->iom_status, TBT) ||
+ IOM_PORT_ACTIVITY_IS(port->iom_status, ALT_MODE_TBT_USB)) &&
+ state->alt && state->alt->svid == USB_TYPEC_TBT_SID)
+ return 0;
+
msg = PMC_USB_SAFE_MODE;
msg |= port->usb3_port << PMC_USB_MSG_USB3_PORT_SHIFT;
@@ -443,7 +454,7 @@ pmc_usb_mux_set(struct typec_mux_dev *mux, struct typec_mux_state *state)
return 0;
if (state->mode == TYPEC_STATE_SAFE)
- return pmc_usb_mux_safe_state(port);
+ return pmc_usb_mux_safe_state(port, state);
if (state->mode == TYPEC_STATE_USB)
return pmc_usb_connect(port, port->role);
--
2.34.1