2022-10-26 06:03:04

by Raju Lakkaraju

[permalink] [raw]
Subject: [PATCH net-next V1 1/2] net: phy: mxl-gpy: Change gpy_update_interface() function return type

gpy_update_interface() is called from gpy_read_status() which does
return error codes. gpy_read_status() would benefit from returning
-EINVAL, etc.

Signed-off-by: Raju Lakkaraju <[email protected]>
---
drivers/net/phy/mxl-gpy.c | 28 ++++++++++++++++++++--------
1 file changed, 20 insertions(+), 8 deletions(-)

diff --git a/drivers/net/phy/mxl-gpy.c b/drivers/net/phy/mxl-gpy.c
index 24bae27eedef..1383af3c2677 100644
--- a/drivers/net/phy/mxl-gpy.c
+++ b/drivers/net/phy/mxl-gpy.c
@@ -370,14 +370,14 @@ static int gpy_config_aneg(struct phy_device *phydev)
VSPEC1_SGMII_CTRL_ANRS, VSPEC1_SGMII_CTRL_ANRS);
}

-static void gpy_update_interface(struct phy_device *phydev)
+static int gpy_update_interface(struct phy_device *phydev)
{
int ret;

/* Interface mode is fixed for USXGMII and integrated PHY */
if (phydev->interface == PHY_INTERFACE_MODE_USXGMII ||
phydev->interface == PHY_INTERFACE_MODE_INTERNAL)
- return;
+ return -EINVAL;

/* Automatically switch SERDES interface between SGMII and 2500-BaseX
* according to speed. Disable ANEG in 2500-BaseX mode.
@@ -387,10 +387,12 @@ static void gpy_update_interface(struct phy_device *phydev)
phydev->interface = PHY_INTERFACE_MODE_2500BASEX;
ret = phy_modify_mmd(phydev, MDIO_MMD_VEND1, VSPEC1_SGMII_CTRL,
VSPEC1_SGMII_CTRL_ANEN, 0);
- if (ret < 0)
+ if (ret < 0) {
phydev_err(phydev,
"Error: Disable of SGMII ANEG failed: %d\n",
ret);
+ return ret;
+ }
break;
case SPEED_1000:
case SPEED_100:
@@ -404,15 +406,22 @@ static void gpy_update_interface(struct phy_device *phydev)
ret = phy_modify_mmd(phydev, MDIO_MMD_VEND1, VSPEC1_SGMII_CTRL,
VSPEC1_SGMII_ANEN_ANRS,
VSPEC1_SGMII_ANEN_ANRS);
- if (ret < 0)
+ if (ret < 0) {
phydev_err(phydev,
"Error: Enable of SGMII ANEG failed: %d\n",
ret);
+ return ret;
+ }
break;
}

- if (phydev->speed == SPEED_2500 || phydev->speed == SPEED_1000)
- genphy_read_master_slave(phydev);
+ if (phydev->speed == SPEED_2500 || phydev->speed == SPEED_1000) {
+ ret = genphy_read_master_slave(phydev);
+ if (ret < 0)
+ return ret;
+ }
+
+ return 0;
}

static int gpy_read_status(struct phy_device *phydev)
@@ -463,8 +472,11 @@ static int gpy_read_status(struct phy_device *phydev)
break;
}

- if (phydev->link)
- gpy_update_interface(phydev);
+ if (phydev->link) {
+ ret = gpy_update_interface(phydev);
+ if (ret < 0)
+ return ret;
+ }

return 0;
}
--
2.25.1