From: Frank Wunderlich <[email protected]>
Add PCIe nodes to Banana Pi R3 SBC which is used on M.2 slot.
Signed-off-by: Frank Wunderlich <[email protected]>
---
.../dts/mediatek/mt7986a-bananapi-bpi-r3.dtsi | 17 +++++++++++++++++
1 file changed, 17 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dtsi b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dtsi
index fc100c3a6415..8eb7079cf6d7 100644
--- a/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7986a-bananapi-bpi-r3.dtsi
@@ -181,6 +181,16 @@ &i2c0 {
status = "okay";
};
+&pcie {
+ pinctrl-names = "default";
+ pinctrl-0 = <&pcie_pins>;
+ status = "okay";
+};
+
+&pcie_phy {
+ status = "okay";
+};
+
&pio {
i2c_pins: i2c-pins {
mux {
@@ -247,6 +257,13 @@ conf-rst {
};
};
+ pcie_pins: pcie-pins {
+ mux {
+ function = "pcie";
+ groups = "pcie_clk", "pcie_pereset";
+ };
+ };
+
spi_flash_pins: spi-flash-pins {
mux {
function = "spi";
--
2.34.1