This driver often takes on the order of 10ms to start, but in some cases
takes more than 100ms. It shouldn't have many cross-device dependencies
to race with, nor racy access to shared state with other drivers, so
this should be a relatively low risk change.
This driver was pinpointed as part of a survey of top slowest initcalls
(i.e., are built in, and probing synchronously) on a lab of ChromeOS
systems.
Signed-off-by: Brian Norris <[email protected]>
---
Changes in v2:
- Move outside #ifdef CONFIG_PM (oops; thanks Alan)
drivers/usb/host/xhci-pci.c | 7 ++++---
1 file changed, 4 insertions(+), 3 deletions(-)
diff --git a/drivers/usb/host/xhci-pci.c b/drivers/usb/host/xhci-pci.c
index 40228a3d77a0..5bbb1fed32d2 100644
--- a/drivers/usb/host/xhci-pci.c
+++ b/drivers/usb/host/xhci-pci.c
@@ -687,11 +687,12 @@ static struct pci_driver xhci_pci_driver = {
/* suspend and resume implemented later */
.shutdown = usb_hcd_pci_shutdown,
-#ifdef CONFIG_PM
.driver = {
- .pm = &usb_hcd_pci_pm_ops
- },
+#ifdef CONFIG_PM
+ .pm = &usb_hcd_pci_pm_ops,
#endif
+ .probe_type = PROBE_PREFER_ASYNCHRONOUS,
+ },
};
static int __init xhci_pci_init(void)
--
2.38.1.273.g43a17bfeac-goog