Hello,
This series contains cleanup patches targeting the Qcom CPUFreq HW driver.
This is a spun off of the clock provier series [1].
Thanks,
Mani
[1] https://lore.kernel.org/lkml/[email protected]/T/
Manivannan Sadhasivam (3):
cpufreq: qcom-hw: Allocate qcom_cpufreq_data during probe
cpufreq: qcom-hw: Use cached dev pointer in probe()
cpufreq: qcom-hw: Move soc_data to struct qcom_cpufreq
drivers/cpufreq/qcom-cpufreq-hw.c | 118 ++++++++++++++----------------
1 file changed, 54 insertions(+), 64 deletions(-)
--
2.25.1
soc_data is a static info of the driver and thus no need to cache it inside
the qcom_cpufreq_data struct which is allocated per frequency domain. So,
move it inside qcom_cpufreq struct.
Signed-off-by: Manivannan Sadhasivam <[email protected]>
---
drivers/cpufreq/qcom-cpufreq-hw.c | 27 ++++++++++++++-------------
1 file changed, 14 insertions(+), 13 deletions(-)
diff --git a/drivers/cpufreq/qcom-cpufreq-hw.c b/drivers/cpufreq/qcom-cpufreq-hw.c
index bc991ef10c05..76f840636828 100644
--- a/drivers/cpufreq/qcom-cpufreq-hw.c
+++ b/drivers/cpufreq/qcom-cpufreq-hw.c
@@ -42,7 +42,6 @@ struct qcom_cpufreq_soc_data {
struct qcom_cpufreq_data {
void __iomem *base;
struct resource *res;
- const struct qcom_cpufreq_soc_data *soc_data;
/*
* Mutex to synchronize between de-init sequence and re-starting LMh
@@ -60,6 +59,7 @@ struct qcom_cpufreq_data {
static struct {
struct qcom_cpufreq_data *data;
+ const struct qcom_cpufreq_soc_data *soc_data;
} qcom_cpufreq;
static unsigned long cpu_hw_rate, xo_rate;
@@ -110,7 +110,7 @@ static int qcom_cpufreq_hw_target_index(struct cpufreq_policy *policy,
unsigned int index)
{
struct qcom_cpufreq_data *data = policy->driver_data;
- const struct qcom_cpufreq_soc_data *soc_data = data->soc_data;
+ const struct qcom_cpufreq_soc_data *soc_data = qcom_cpufreq.soc_data;
unsigned long freq = policy->freq_table[index].frequency;
unsigned int i;
@@ -138,7 +138,7 @@ static unsigned int qcom_cpufreq_hw_get(unsigned int cpu)
return 0;
data = policy->driver_data;
- soc_data = data->soc_data;
+ soc_data = qcom_cpufreq.soc_data;
index = readl_relaxed(data->base + soc_data->reg_perf_state);
index = min(index, LUT_MAX_ENTRIES - 1);
@@ -150,7 +150,7 @@ static unsigned int qcom_cpufreq_hw_fast_switch(struct cpufreq_policy *policy,
unsigned int target_freq)
{
struct qcom_cpufreq_data *data = policy->driver_data;
- const struct qcom_cpufreq_soc_data *soc_data = data->soc_data;
+ const struct qcom_cpufreq_soc_data *soc_data = qcom_cpufreq.soc_data;
unsigned int index;
unsigned int i;
@@ -174,7 +174,7 @@ static int qcom_cpufreq_hw_read_lut(struct device *cpu_dev,
unsigned long rate;
int ret;
struct qcom_cpufreq_data *drv_data = policy->driver_data;
- const struct qcom_cpufreq_soc_data *soc_data = drv_data->soc_data;
+ const struct qcom_cpufreq_soc_data *soc_data = qcom_cpufreq.soc_data;
table = kcalloc(LUT_MAX_ENTRIES + 1, sizeof(*table), GFP_KERNEL);
if (!table)
@@ -291,10 +291,10 @@ static unsigned long qcom_lmh_get_throttle_freq(struct qcom_cpufreq_data *data)
{
unsigned int lval;
- if (data->soc_data->reg_current_vote)
- lval = readl_relaxed(data->base + data->soc_data->reg_current_vote) & 0x3ff;
+ if (qcom_cpufreq.soc_data->reg_current_vote)
+ lval = readl_relaxed(data->base + qcom_cpufreq.soc_data->reg_current_vote) & 0x3ff;
else
- lval = readl_relaxed(data->base + data->soc_data->reg_domain_state) & 0xff;
+ lval = readl_relaxed(data->base + qcom_cpufreq.soc_data->reg_domain_state) & 0xff;
return lval * xo_rate;
}
@@ -366,9 +366,9 @@ static irqreturn_t qcom_lmh_dcvs_handle_irq(int irq, void *data)
disable_irq_nosync(c_data->throttle_irq);
schedule_delayed_work(&c_data->throttle_work, 0);
- if (c_data->soc_data->reg_intr_clr)
+ if (qcom_cpufreq.soc_data->reg_intr_clr)
writel_relaxed(GT_IRQ_STATUS,
- c_data->base + c_data->soc_data->reg_intr_clr);
+ c_data->base + qcom_cpufreq.soc_data->reg_intr_clr);
return IRQ_HANDLED;
}
@@ -514,16 +514,15 @@ static int qcom_cpufreq_hw_cpu_init(struct cpufreq_policy *policy)
return ret;
index = args.args[0];
- data->soc_data = of_device_get_match_data(&pdev->dev);
data = &qcom_cpufreq.data[index];
/* HW should be in enabled state to proceed */
- if (!(readl_relaxed(data->base + data->soc_data->reg_enable) & 0x1)) {
+ if (!(readl_relaxed(data->base + qcom_cpufreq.soc_data->reg_enable) & 0x1)) {
dev_err(dev, "Domain-%d cpufreq hardware not enabled\n", index);
return -ENODEV;
}
- if (readl_relaxed(data->base + data->soc_data->reg_dcvs_ctrl) & 0x1)
+ if (readl_relaxed(data->base + qcom_cpufreq.soc_data->reg_dcvs_ctrl) & 0x1)
data->per_core_dcvs = true;
qcom_get_related_cpus(index, policy->cpus);
@@ -644,6 +643,8 @@ static int qcom_cpufreq_hw_driver_probe(struct platform_device *pdev)
if (!qcom_cpufreq.data)
return -ENOMEM;
+ qcom_cpufreq.soc_data = of_device_get_match_data(dev);
+
for (i = 0; i < num_domains; i++) {
struct qcom_cpufreq_data *data = &qcom_cpufreq.data[i];
struct resource *res;
--
2.25.1
On 02-11-22, 14:02, Manivannan Sadhasivam wrote:
> Hello,
>
> This series contains cleanup patches targeting the Qcom CPUFreq HW driver.
> This is a spun off of the clock provier series [1].
>
> Thanks,
> Mani
>
> [1] https://lore.kernel.org/lkml/[email protected]/T/
On what have you rebased it ? This should be based of my cpufreq/arm/linux-next
branch.
--
viresh
qcom_cpufreq_data is allocated based on the number of frequency domains
defined in DT which is static and won't change during runtime. There is
no real reason to allocate it during the CPU init() callback and deallocate
it during exit(). Hence, move the allocation to probe() and use the
allocated memory during init().
This also allows us to use devm_platform_get_and_ioremap_resource() helper
for acquiring the freq-domain resources from DT.
Signed-off-by: Manivannan Sadhasivam <[email protected]>
---
drivers/cpufreq/qcom-cpufreq-hw.c | 86 +++++++++++++------------------
1 file changed, 37 insertions(+), 49 deletions(-)
diff --git a/drivers/cpufreq/qcom-cpufreq-hw.c b/drivers/cpufreq/qcom-cpufreq-hw.c
index a5b3b8d0e164..1842e9facaa1 100644
--- a/drivers/cpufreq/qcom-cpufreq-hw.c
+++ b/drivers/cpufreq/qcom-cpufreq-hw.c
@@ -58,6 +58,10 @@ struct qcom_cpufreq_data {
bool per_core_dcvs;
};
+static struct {
+ struct qcom_cpufreq_data *data;
+} qcom_cpufreq;
+
static unsigned long cpu_hw_rate, xo_rate;
static bool icc_scaling_enabled;
@@ -489,8 +493,6 @@ static int qcom_cpufreq_hw_cpu_init(struct cpufreq_policy *policy)
struct of_phandle_args args;
struct device_node *cpu_np;
struct device *cpu_dev;
- struct resource *res;
- void __iomem *base;
struct qcom_cpufreq_data *data;
int ret, index;
@@ -512,43 +514,16 @@ static int qcom_cpufreq_hw_cpu_init(struct cpufreq_policy *policy)
return ret;
index = args.args[0];
-
- res = platform_get_resource(pdev, IORESOURCE_MEM, index);
- if (!res) {
- dev_err(dev, "failed to get mem resource %d\n", index);
- return -ENODEV;
- }
-
- if (!request_mem_region(res->start, resource_size(res), res->name)) {
- dev_err(dev, "failed to request resource %pR\n", res);
- return -EBUSY;
- }
-
- base = ioremap(res->start, resource_size(res));
- if (!base) {
- dev_err(dev, "failed to map resource %pR\n", res);
- ret = -ENOMEM;
- goto release_region;
- }
-
- data = kzalloc(sizeof(*data), GFP_KERNEL);
- if (!data) {
- ret = -ENOMEM;
- goto unmap_base;
- }
-
data->soc_data = of_device_get_match_data(&pdev->dev);
- data->base = base;
- data->res = res;
+ data = &qcom_cpufreq.data[index];
/* HW should be in enabled state to proceed */
- if (!(readl_relaxed(base + data->soc_data->reg_enable) & 0x1)) {
+ if (!(readl_relaxed(data->base + data->soc_data->reg_enable) & 0x1)) {
dev_err(dev, "Domain-%d cpufreq hardware not enabled\n", index);
- ret = -ENODEV;
- goto error;
+ return -ENODEV;
}
- if (readl_relaxed(base + data->soc_data->reg_dcvs_ctrl) & 0x1)
+ if (readl_relaxed(data->base + data->soc_data->reg_dcvs_ctrl) & 0x1)
data->per_core_dcvs = true;
qcom_get_related_cpus(index, policy->cpus);
@@ -559,14 +534,13 @@ static int qcom_cpufreq_hw_cpu_init(struct cpufreq_policy *policy)
ret = qcom_cpufreq_hw_read_lut(cpu_dev, policy);
if (ret) {
dev_err(dev, "Domain-%d failed to read LUT\n", index);
- goto error;
+ return ret;
}
ret = dev_pm_opp_get_opp_count(cpu_dev);
if (ret <= 0) {
dev_err(cpu_dev, "Failed to add OPPs\n");
- ret = -ENODEV;
- goto error;
+ return -ENODEV;
}
if (policy_has_boost_freq(policy)) {
@@ -575,18 +549,7 @@ static int qcom_cpufreq_hw_cpu_init(struct cpufreq_policy *policy)
dev_warn(cpu_dev, "failed to enable boost: %d\n", ret);
}
- ret = qcom_cpufreq_hw_lmh_init(policy, index);
- if (ret)
- goto error;
-
- return 0;
-error:
- kfree(data);
-unmap_base:
- iounmap(base);
-release_region:
- release_mem_region(res->start, resource_size(res));
- return ret;
+ return qcom_cpufreq_hw_lmh_init(policy, index);
}
static int qcom_cpufreq_hw_cpu_exit(struct cpufreq_policy *policy)
@@ -643,7 +606,7 @@ static int qcom_cpufreq_hw_driver_probe(struct platform_device *pdev)
{
struct device *cpu_dev;
struct clk *clk;
- int ret;
+ int ret, i, num_domains;
clk = clk_get(&pdev->dev, "xo");
if (IS_ERR(clk))
@@ -670,6 +633,31 @@ static int qcom_cpufreq_hw_driver_probe(struct platform_device *pdev)
if (ret)
return ret;
+ /* Allocate qcom_cpufreq_data based on the available frequency domains in DT */
+ num_domains = of_property_count_elems_of_size(pdev->dev.of_node, "reg", sizeof(u32) * 4);
+ if (num_domains <= 0)
+ return num_domains;
+
+ qcom_cpufreq.data = devm_kzalloc(&pdev->dev, sizeof(struct qcom_cpufreq_data) * num_domains,
+ GFP_KERNEL);
+ if (!qcom_cpufreq.data)
+ return -ENOMEM;
+
+ for (i = 0; i < num_domains; i++) {
+ struct qcom_cpufreq_data *data = &qcom_cpufreq.data[i];
+ struct resource *res;
+ void __iomem *base;
+
+ base = devm_platform_get_and_ioremap_resource(pdev, i, &res);
+ if (IS_ERR(base)) {
+ dev_err(&pdev->dev, "Failed to map resource %pR\n", res);
+ return PTR_ERR(base);
+ }
+
+ data->base = base;
+ data->res = res;
+ }
+
ret = cpufreq_register_driver(&cpufreq_qcom_hw_driver);
if (ret)
dev_err(&pdev->dev, "CPUFreq HW driver failed to register\n");
--
2.25.1
There are multiple instances of dev pointer used in the probe() function.
Instead of referencing pdev->dev all the time, let's use a cached dev
pointer to simplify the code.
Signed-off-by: Manivannan Sadhasivam <[email protected]>
---
drivers/cpufreq/qcom-cpufreq-hw.c | 15 ++++++++-------
1 file changed, 8 insertions(+), 7 deletions(-)
diff --git a/drivers/cpufreq/qcom-cpufreq-hw.c b/drivers/cpufreq/qcom-cpufreq-hw.c
index 1842e9facaa1..bc991ef10c05 100644
--- a/drivers/cpufreq/qcom-cpufreq-hw.c
+++ b/drivers/cpufreq/qcom-cpufreq-hw.c
@@ -604,18 +604,19 @@ static struct cpufreq_driver cpufreq_qcom_hw_driver = {
static int qcom_cpufreq_hw_driver_probe(struct platform_device *pdev)
{
+ struct device *dev = &pdev->dev;
struct device *cpu_dev;
struct clk *clk;
int ret, i, num_domains;
- clk = clk_get(&pdev->dev, "xo");
+ clk = clk_get(dev, "xo");
if (IS_ERR(clk))
return PTR_ERR(clk);
xo_rate = clk_get_rate(clk);
clk_put(clk);
- clk = clk_get(&pdev->dev, "alternate");
+ clk = clk_get(dev, "alternate");
if (IS_ERR(clk))
return PTR_ERR(clk);
@@ -634,11 +635,11 @@ static int qcom_cpufreq_hw_driver_probe(struct platform_device *pdev)
return ret;
/* Allocate qcom_cpufreq_data based on the available frequency domains in DT */
- num_domains = of_property_count_elems_of_size(pdev->dev.of_node, "reg", sizeof(u32) * 4);
+ num_domains = of_property_count_elems_of_size(dev->of_node, "reg", sizeof(u32) * 4);
if (num_domains <= 0)
return num_domains;
- qcom_cpufreq.data = devm_kzalloc(&pdev->dev, sizeof(struct qcom_cpufreq_data) * num_domains,
+ qcom_cpufreq.data = devm_kzalloc(dev, sizeof(struct qcom_cpufreq_data) * num_domains,
GFP_KERNEL);
if (!qcom_cpufreq.data)
return -ENOMEM;
@@ -650,7 +651,7 @@ static int qcom_cpufreq_hw_driver_probe(struct platform_device *pdev)
base = devm_platform_get_and_ioremap_resource(pdev, i, &res);
if (IS_ERR(base)) {
- dev_err(&pdev->dev, "Failed to map resource %pR\n", res);
+ dev_err(dev, "Failed to map resource %pR\n", res);
return PTR_ERR(base);
}
@@ -660,9 +661,9 @@ static int qcom_cpufreq_hw_driver_probe(struct platform_device *pdev)
ret = cpufreq_register_driver(&cpufreq_qcom_hw_driver);
if (ret)
- dev_err(&pdev->dev, "CPUFreq HW driver failed to register\n");
+ dev_err(dev, "CPUFreq HW driver failed to register\n");
else
- dev_dbg(&pdev->dev, "QCOM CPUFreq HW driver initialized\n");
+ dev_dbg(dev, "QCOM CPUFreq HW driver initialized\n");
return ret;
}
--
2.25.1