Document the optional "altr,sysmgr-syscon" binding that is used to
access the System Manager register that controls the SDMMC clock
phase.
Signed-off-by: Dinh Nguyen <[email protected]>
---
v7: and "not" for the required "altr,sysmgr-syscon" binding
v6: make "altr,sysmgr-syscon" optional
v5: document reg shift
v4: add else statement
v3: document that the "altr,sysmgr-syscon" binding is only applicable to
"altr,socfpga-dw-mshc"
v2: document "altr,sysmgr-syscon" in the MMC section
---
.../bindings/mmc/synopsys-dw-mshc.yaml | 33 +++++++++++++++++--
1 file changed, 30 insertions(+), 3 deletions(-)
diff --git a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.yaml b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.yaml
index ae6d6fca79e2..80dd3d72424f 100644
--- a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.yaml
+++ b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.yaml
@@ -6,9 +6,6 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
title: Synopsys Designware Mobile Storage Host Controller Binding
-allOf:
- - $ref: "synopsys-dw-mshc-common.yaml#"
-
maintainers:
- Ulf Hansson <[email protected]>
@@ -38,6 +35,36 @@ properties:
- const: biu
- const: ciu
+ altr,sysmgr-syscon:
+ $ref: /schemas/types.yaml#/definitions/phandle-array
+ items:
+ - items:
+ - description: phandle to the sysmgr node
+ - description: register offset that controls the SDMMC clock phase
+ - description: register shift for the smplsel(drive in) setting
+ description:
+ This property is optional. Contains the phandle to System Manager block
+ that contains the SDMMC clock-phase control register. The first value is
+ the pointer to the sysmgr, the 2nd value is the register offset for the
+ SDMMC clock phase register, and the 3rd value is the bit shift for the
+ smplsel(drive in) setting.
+
+allOf:
+ - $ref: "synopsys-dw-mshc-common.yaml#"
+
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: altr,socfpga-dw-mshc
+ then:
+ not:
+ required:
+ - altr,sysmgr-syscon
+ else:
+ properties:
+ altr,sysmgr-syscon: false
+
required:
- compatible
- reg
--
2.25.1
The sdmmc controller's CIU(Card Interface Unit) clock's phase can be
adjusted through the register in the system manager. Add the binding
"altr,sysmgr-syscon" to the SDMMC node for the driver to access the
system manager. Add the "clk-phase-sd-hs" property in the SDMMC node to
designate the smpsel and drvsel properties for the CIU clock.
Signed-off-by: Dinh Nguyen <[email protected]>
---
v7: no changes
v6: no changes
v5: new
---
arch/arm/boot/dts/socfpga.dtsi | 1 +
arch/arm/boot/dts/socfpga_arria10.dtsi | 1 +
arch/arm/boot/dts/socfpga_arria10_mercury_aa1.dtsi | 1 +
arch/arm/boot/dts/socfpga_arria10_socdk_sdmmc.dts | 1 +
arch/arm/boot/dts/socfpga_arria5.dtsi | 1 +
arch/arm/boot/dts/socfpga_cyclone5.dtsi | 1 +
arch/arm/boot/dts/socfpga_cyclone5_mcv.dtsi | 1 +
7 files changed, 7 insertions(+)
diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi
index 2459f3cd7dd9..604fc6e0c4ad 100644
--- a/arch/arm/boot/dts/socfpga.dtsi
+++ b/arch/arm/boot/dts/socfpga.dtsi
@@ -765,6 +765,7 @@ mmc: dwmmc0@ff704000 {
clocks = <&l4_mp_clk>, <&sdmmc_clk_divided>;
clock-names = "biu", "ciu";
resets = <&rst SDMMC_RESET>;
+ altr,sysmgr-syscon = <&sysmgr 0x108 3>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/socfpga_arria10.dtsi b/arch/arm/boot/dts/socfpga_arria10.dtsi
index 4370e3cbbb4b..b6ebe207e2bc 100644
--- a/arch/arm/boot/dts/socfpga_arria10.dtsi
+++ b/arch/arm/boot/dts/socfpga_arria10.dtsi
@@ -666,6 +666,7 @@ mmc: dwmmc0@ff808000 {
clocks = <&l4_mp_clk>, <&sdmmc_clk>;
clock-names = "biu", "ciu";
resets = <&rst SDMMC_RESET>;
+ altr,sysmgr-syscon = <&sysmgr 0x28 4>;
status = "disabled";
};
diff --git a/arch/arm/boot/dts/socfpga_arria10_mercury_aa1.dtsi b/arch/arm/boot/dts/socfpga_arria10_mercury_aa1.dtsi
index ad7cd14de6b6..41f865c8c098 100644
--- a/arch/arm/boot/dts/socfpga_arria10_mercury_aa1.dtsi
+++ b/arch/arm/boot/dts/socfpga_arria10_mercury_aa1.dtsi
@@ -73,6 +73,7 @@ &mmc {
cap-sd-highspeed;
broken-cd;
bus-width = <4>;
+ clk-phase-sd-hs = <0>, <135>;
};
&osc1 {
diff --git a/arch/arm/boot/dts/socfpga_arria10_socdk_sdmmc.dts b/arch/arm/boot/dts/socfpga_arria10_socdk_sdmmc.dts
index 64dc0799f3d7..d3969367f4b5 100644
--- a/arch/arm/boot/dts/socfpga_arria10_socdk_sdmmc.dts
+++ b/arch/arm/boot/dts/socfpga_arria10_socdk_sdmmc.dts
@@ -12,6 +12,7 @@ &mmc {
cap-mmc-highspeed;
broken-cd;
bus-width = <4>;
+ clk-phase-sd-hs = <0>, <135>;
};
&eccmgr {
diff --git a/arch/arm/boot/dts/socfpga_arria5.dtsi b/arch/arm/boot/dts/socfpga_arria5.dtsi
index 22dbf07afcff..b531639ce7dc 100644
--- a/arch/arm/boot/dts/socfpga_arria5.dtsi
+++ b/arch/arm/boot/dts/socfpga_arria5.dtsi
@@ -23,6 +23,7 @@ mmc0: dwmmc0@ff704000 {
bus-width = <4>;
cap-mmc-highspeed;
cap-sd-highspeed;
+ clk-phase-sd-hs = <0>, <135>;
};
sysmgr@ffd08000 {
diff --git a/arch/arm/boot/dts/socfpga_cyclone5.dtsi b/arch/arm/boot/dts/socfpga_cyclone5.dtsi
index 319a71e41ea4..a9d1ba66f1ff 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5.dtsi
+++ b/arch/arm/boot/dts/socfpga_cyclone5.dtsi
@@ -23,6 +23,7 @@ mmc0: dwmmc0@ff704000 {
bus-width = <4>;
cap-mmc-highspeed;
cap-sd-highspeed;
+ clk-phase-sd-hs = <0>, <135>;
};
sysmgr@ffd08000 {
diff --git a/arch/arm/boot/dts/socfpga_cyclone5_mcv.dtsi b/arch/arm/boot/dts/socfpga_cyclone5_mcv.dtsi
index bd92806ffc12..3b9daddf91cd 100644
--- a/arch/arm/boot/dts/socfpga_cyclone5_mcv.dtsi
+++ b/arch/arm/boot/dts/socfpga_cyclone5_mcv.dtsi
@@ -18,5 +18,6 @@ memory@0 {
&mmc0 { /* On-SoM eMMC */
bus-width = <8>;
+ clk-phase-sd-hs = <0>, <135>;
status = "okay";
};
--
2.25.1
Now that the SDMMC driver supports setting the clk-phase, we can remove
the need to do it in the clock driver.
Acked-by: Stephen Boyd <[email protected]>
Signed-off-by: Dinh Nguyen <[email protected]>
---
v7: add acked-by
v6: remove unused clk_phase in clk-gate.c
v5: new
---
drivers/clk/socfpga/clk-gate-a10.c | 68 ------------------------------
drivers/clk/socfpga/clk-gate.c | 61 ---------------------------
drivers/clk/socfpga/clk.h | 1 -
3 files changed, 130 deletions(-)
diff --git a/drivers/clk/socfpga/clk-gate-a10.c b/drivers/clk/socfpga/clk-gate-a10.c
index 738c53391e39..7cdf2f07c79b 100644
--- a/drivers/clk/socfpga/clk-gate-a10.c
+++ b/drivers/clk/socfpga/clk-gate-a10.c
@@ -35,59 +35,7 @@ static unsigned long socfpga_gate_clk_recalc_rate(struct clk_hw *hwclk,
return parent_rate / div;
}
-static int socfpga_clk_prepare(struct clk_hw *hwclk)
-{
- struct socfpga_gate_clk *socfpgaclk = to_socfpga_gate_clk(hwclk);
- int i;
- u32 hs_timing;
- u32 clk_phase[2];
-
- if (socfpgaclk->clk_phase[0] || socfpgaclk->clk_phase[1]) {
- for (i = 0; i < ARRAY_SIZE(clk_phase); i++) {
- switch (socfpgaclk->clk_phase[i]) {
- case 0:
- clk_phase[i] = 0;
- break;
- case 45:
- clk_phase[i] = 1;
- break;
- case 90:
- clk_phase[i] = 2;
- break;
- case 135:
- clk_phase[i] = 3;
- break;
- case 180:
- clk_phase[i] = 4;
- break;
- case 225:
- clk_phase[i] = 5;
- break;
- case 270:
- clk_phase[i] = 6;
- break;
- case 315:
- clk_phase[i] = 7;
- break;
- default:
- clk_phase[i] = 0;
- break;
- }
- }
-
- hs_timing = SYSMGR_SDMMC_CTRL_SET_AS10(clk_phase[0], clk_phase[1]);
- if (!IS_ERR(socfpgaclk->sys_mgr_base_addr))
- regmap_write(socfpgaclk->sys_mgr_base_addr,
- SYSMGR_SDMMCGRP_CTRL_OFFSET, hs_timing);
- else
- pr_err("%s: cannot set clk_phase because sys_mgr_base_addr is not available!\n",
- __func__);
- }
- return 0;
-}
-
static struct clk_ops gateclk_ops = {
- .prepare = socfpga_clk_prepare,
.recalc_rate = socfpga_gate_clk_recalc_rate,
};
@@ -96,7 +44,6 @@ static void __init __socfpga_gate_init(struct device_node *node,
{
u32 clk_gate[2];
u32 div_reg[3];
- u32 clk_phase[2];
u32 fixed_div;
struct clk_hw *hw_clk;
struct socfpga_gate_clk *socfpga_clk;
@@ -136,21 +83,6 @@ static void __init __socfpga_gate_init(struct device_node *node,
socfpga_clk->div_reg = NULL;
}
- rc = of_property_read_u32_array(node, "clk-phase", clk_phase, 2);
- if (!rc) {
- socfpga_clk->clk_phase[0] = clk_phase[0];
- socfpga_clk->clk_phase[1] = clk_phase[1];
-
- socfpga_clk->sys_mgr_base_addr =
- syscon_regmap_lookup_by_compatible("altr,sys-mgr");
- if (IS_ERR(socfpga_clk->sys_mgr_base_addr)) {
- pr_err("%s: failed to find altr,sys-mgr regmap!\n",
- __func__);
- kfree(socfpga_clk);
- return;
- }
- }
-
of_property_read_string(node, "clock-output-names", &clk_name);
init.name = clk_name;
diff --git a/drivers/clk/socfpga/clk-gate.c b/drivers/clk/socfpga/clk-gate.c
index 53d6e3ec4309..3e347b9e9eff 100644
--- a/drivers/clk/socfpga/clk-gate.c
+++ b/drivers/clk/socfpga/clk-gate.c
@@ -108,61 +108,7 @@ static unsigned long socfpga_clk_recalc_rate(struct clk_hw *hwclk,
return parent_rate / div;
}
-static int socfpga_clk_prepare(struct clk_hw *hwclk)
-{
- struct socfpga_gate_clk *socfpgaclk = to_socfpga_gate_clk(hwclk);
- struct regmap *sys_mgr_base_addr;
- int i;
- u32 hs_timing;
- u32 clk_phase[2];
-
- if (socfpgaclk->clk_phase[0] || socfpgaclk->clk_phase[1]) {
- sys_mgr_base_addr = syscon_regmap_lookup_by_compatible("altr,sys-mgr");
- if (IS_ERR(sys_mgr_base_addr)) {
- pr_err("%s: failed to find altr,sys-mgr regmap!\n", __func__);
- return -EINVAL;
- }
-
- for (i = 0; i < 2; i++) {
- switch (socfpgaclk->clk_phase[i]) {
- case 0:
- clk_phase[i] = 0;
- break;
- case 45:
- clk_phase[i] = 1;
- break;
- case 90:
- clk_phase[i] = 2;
- break;
- case 135:
- clk_phase[i] = 3;
- break;
- case 180:
- clk_phase[i] = 4;
- break;
- case 225:
- clk_phase[i] = 5;
- break;
- case 270:
- clk_phase[i] = 6;
- break;
- case 315:
- clk_phase[i] = 7;
- break;
- default:
- clk_phase[i] = 0;
- break;
- }
- }
- hs_timing = SYSMGR_SDMMC_CTRL_SET(clk_phase[0], clk_phase[1]);
- regmap_write(sys_mgr_base_addr, SYSMGR_SDMMCGRP_CTRL_OFFSET,
- hs_timing);
- }
- return 0;
-}
-
static struct clk_ops gateclk_ops = {
- .prepare = socfpga_clk_prepare,
.recalc_rate = socfpga_clk_recalc_rate,
.get_parent = socfpga_clk_get_parent,
.set_parent = socfpga_clk_set_parent,
@@ -172,7 +118,6 @@ void __init socfpga_gate_init(struct device_node *node)
{
u32 clk_gate[2];
u32 div_reg[3];
- u32 clk_phase[2];
u32 fixed_div;
struct clk_hw *hw_clk;
struct socfpga_gate_clk *socfpga_clk;
@@ -218,12 +163,6 @@ void __init socfpga_gate_init(struct device_node *node)
socfpga_clk->div_reg = NULL;
}
- rc = of_property_read_u32_array(node, "clk-phase", clk_phase, 2);
- if (!rc) {
- socfpga_clk->clk_phase[0] = clk_phase[0];
- socfpga_clk->clk_phase[1] = clk_phase[1];
- }
-
of_property_read_string(node, "clock-output-names", &clk_name);
init.name = clk_name;
diff --git a/drivers/clk/socfpga/clk.h b/drivers/clk/socfpga/clk.h
index d80115fbdd6a..9a2fb2dde5b8 100644
--- a/drivers/clk/socfpga/clk.h
+++ b/drivers/clk/socfpga/clk.h
@@ -50,7 +50,6 @@ struct socfpga_gate_clk {
u32 width; /* only valid if div_reg != 0 */
u32 shift; /* only valid if div_reg != 0 */
u32 bypass_shift; /* only valid if bypass_reg != 0 */
- u32 clk_phase[2];
};
struct socfpga_periph_clk {
--
2.25.1
Now that the SDMMC driver can use the "clk-phase-sd-hs" binding, we don't
need the clk-phase in the sdmmc_clk anymore.
Signed-off-by: Dinh Nguyen <[email protected]>
---
v7: no changes
v6: no changes
v5: new
---
arch/arm/boot/dts/socfpga.dtsi | 1 -
arch/arm/boot/dts/socfpga_arria10.dtsi | 1 -
2 files changed, 2 deletions(-)
diff --git a/arch/arm/boot/dts/socfpga.dtsi b/arch/arm/boot/dts/socfpga.dtsi
index 604fc6e0c4ad..a2419a5c6c26 100644
--- a/arch/arm/boot/dts/socfpga.dtsi
+++ b/arch/arm/boot/dts/socfpga.dtsi
@@ -453,7 +453,6 @@ sdmmc_clk: sdmmc_clk {
compatible = "altr,socfpga-gate-clk";
clocks = <&f2s_periph_ref_clk>, <&main_nand_sdmmc_clk>, <&per_nand_mmc_clk>;
clk-gate = <0xa0 8>;
- clk-phase = <0 135>;
};
sdmmc_clk_divided: sdmmc_clk_divided {
diff --git a/arch/arm/boot/dts/socfpga_arria10.dtsi b/arch/arm/boot/dts/socfpga_arria10.dtsi
index b6ebe207e2bc..eb528c103d70 100644
--- a/arch/arm/boot/dts/socfpga_arria10.dtsi
+++ b/arch/arm/boot/dts/socfpga_arria10.dtsi
@@ -365,7 +365,6 @@ sdmmc_clk: sdmmc_clk {
compatible = "altr,socfpga-a10-gate-clk";
clocks = <&sdmmc_free_clk>;
clk-gate = <0xC8 5>;
- clk-phase = <0 135>;
};
qspi_clk: qspi_clk {
--
2.25.1
On 02/11/2022 13:38, Dinh Nguyen wrote:
> Document the optional "altr,sysmgr-syscon" binding that is used to
> access the System Manager register that controls the SDMMC clock
> phase.
>
> Signed-off-by: Dinh Nguyen <[email protected]>
> ---
> v7: and "not" for the required "altr,sysmgr-syscon" binding
> v6: make "altr,sysmgr-syscon" optional
> v5: document reg shift
> v4: add else statement
> v3: document that the "altr,sysmgr-syscon" binding is only applicable to
> "altr,socfpga-dw-mshc"
> v2: document "altr,sysmgr-syscon" in the MMC section
> ---
> .../bindings/mmc/synopsys-dw-mshc.yaml | 33 +++++++++++++++++--
> 1 file changed, 30 insertions(+), 3 deletions(-)
>
> diff --git a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.yaml b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.yaml
> index ae6d6fca79e2..80dd3d72424f 100644
> --- a/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.yaml
> +++ b/Documentation/devicetree/bindings/mmc/synopsys-dw-mshc.yaml
> @@ -6,9 +6,6 @@ $schema: http://devicetree.org/meta-schemas/core.yaml#
>
> title: Synopsys Designware Mobile Storage Host Controller Binding
>
> -allOf:
> - - $ref: "synopsys-dw-mshc-common.yaml#"
> -
> maintainers:
> - Ulf Hansson <[email protected]>
>
> @@ -38,6 +35,36 @@ properties:
> - const: biu
> - const: ciu
>
> + altr,sysmgr-syscon:
> + $ref: /schemas/types.yaml#/definitions/phandle-array
> + items:
> + - items:
> + - description: phandle to the sysmgr node
> + - description: register offset that controls the SDMMC clock phase
> + - description: register shift for the smplsel(drive in) setting
> + description:
> + This property is optional. Contains the phandle to System Manager block
> + that contains the SDMMC clock-phase control register. The first value is
> + the pointer to the sysmgr, the 2nd value is the register offset for the
> + SDMMC clock phase register, and the 3rd value is the bit shift for the
> + smplsel(drive in) setting.
> +
> +allOf:
> + - $ref: "synopsys-dw-mshc-common.yaml#"
Drop the quotes.
Best regards,
Krzysztof