s/renesas,i2c-r9a09g011/renesas,r9a09g011-i2c/g for consistency.
renesas,i2c-r9a09g011 is not actually used by the driver, therefore
changing this doesn't cause any harm.
Fixes: 54ac6794df9d ("arm64: dts: renesas: r9a09g011: Add i2c nodes")
Signed-off-by: Fabrizio Castro <[email protected]>
---
arch/arm64/boot/dts/renesas/r9a09g011.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/renesas/r9a09g011.dtsi b/arch/arm64/boot/dts/renesas/r9a09g011.dtsi
index 1948d2e6bcae..2ccd48ee9880 100644
--- a/arch/arm64/boot/dts/renesas/r9a09g011.dtsi
+++ b/arch/arm64/boot/dts/renesas/r9a09g011.dtsi
@@ -126,7 +126,7 @@ cpg: clock-controller@a3500000 {
i2c0: i2c@a4030000 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "renesas,i2c-r9a09g011", "renesas,rzv2m-i2c";
+ compatible = "renesas,r9a09g011-i2c", "renesas,rzv2m-i2c";
reg = <0 0xa4030000 0 0x80>;
interrupts = <GIC_SPI 232 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 236 IRQ_TYPE_EDGE_RISING>;
@@ -140,7 +140,7 @@ i2c0: i2c@a4030000 {
i2c2: i2c@a4030100 {
#address-cells = <1>;
#size-cells = <0>;
- compatible = "renesas,i2c-r9a09g011", "renesas,rzv2m-i2c";
+ compatible = "renesas,r9a09g011-i2c", "renesas,rzv2m-i2c";
reg = <0 0xa4030100 0 0x80>;
interrupts = <GIC_SPI 234 IRQ_TYPE_EDGE_RISING>,
<GIC_SPI 238 IRQ_TYPE_EDGE_RISING>;
--
2.34.1