2022-11-04 07:57:27

by Charl Liu

Subject: [PATCH V2 1/1] mmc:sdhci:Fix the SD tuning issue that the SDHCI_TRANSFER_MODE is cleared incorrectly

When cmd->opcode == MMC_SEND_TUNING_BLOCK, the SDHCI_TRANSFER_MODE
should also be kept

Signed-off-by: Charl Liu <[email protected]>
---
change in V1:
Keeping the SDHCI_TRANSFER_MODE when cmd->opcode == MMC_END_TUNING_BLOCK

change in V2:
add the mmc_op_tuning interface to judge if the opcode is tuning CMD
---
drivers/mmc/host/sdhci.c | 2 +-
include/linux/mmc/mmc.h | 6 ++++++
2 files changed, 7 insertions(+), 1 deletion(-)

diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
index 22152029e14c..9388628215ca 100644
--- a/drivers/mmc/host/sdhci.c
+++ b/drivers/mmc/host/sdhci.c
@@ -1430,7 +1430,7 @@ static void sdhci_set_transfer_mode(struct sdhci_host *host,
if (host->quirks2 &
SDHCI_QUIRK2_CLEAR_TRANSFERMODE_REG_BEFORE_CMD) {
/* must not clear SDHCI_TRANSFER_MODE when tuning */
- if (cmd->opcode != MMC_SEND_TUNING_BLOCK_HS200)
+ if (!mmc_op_tuning(cmd->opcode))
sdhci_writew(host, 0x0, SDHCI_TRANSFER_MODE);
} else {
/* clear Auto CMD settings for no data CMDs */
diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h
index d9a65c6a8816..d809bdfcc59b 100644
--- a/include/linux/mmc/mmc.h
+++ b/include/linux/mmc/mmc.h
@@ -99,6 +99,12 @@ static inline bool mmc_op_multi(u32 opcode)
opcode == MMC_READ_MULTIPLE_BLOCK;
}

+static inline bool mmc_op_tuning(u32 opcode)
+{
+ return opcode == MMC_SEND_TUNING_BLOCK ||
+ opcode == MMC_SEND_TUNING_BLOCK_HS200;
+}
+
/*
* MMC_SWITCH argument format:
*
--
2.32.0

2022-11-04 08:30:27

by Adrian Hunter

Subject: Re: [PATCH V2 1/1] mmc:sdhci:Fix the SD tuning issue that the SDHCI_TRANSFER_MODE is cleared incorrectly

On 4/11/22 08:42, Charl Liu wrote:
> When cmd->opcode == MMC_SEND_TUNING_BLOCK, the SDHCI_TRANSFER_MODE
> should also be kept
>
> Signed-off-by: Charl Liu <[email protected]>
> ---
> change in V1:
> Keeping the SDHCI_TRANSFER_MODE when cmd->opcode == MMC_END_TUNING_BLOCK
>
> change in V2:
> add the mmc_op_tuning interface to judge if the opcode is tuning CMD
> ---
> drivers/mmc/host/sdhci.c | 2 +-
> include/linux/mmc/mmc.h | 6 ++++++
> 2 files changed, 7 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c
> index 22152029e14c..9388628215ca 100644
> --- a/drivers/mmc/host/sdhci.c
> +++ b/drivers/mmc/host/sdhci.c
> @@ -1430,7 +1430,7 @@ static void sdhci_set_transfer_mode(struct sdhci_host *host,
> if (host->quirks2 &
> SDHCI_QUIRK2_CLEAR_TRANSFERMODE_REG_BEFORE_CMD) {
> /* must not clear SDHCI_TRANSFER_MODE when tuning */
> - if (cmd->opcode != MMC_SEND_TUNING_BLOCK_HS200)
> + if (!mmc_op_tuning(cmd->opcode))
> sdhci_writew(host, 0x0, SDHCI_TRANSFER_MODE);
> } else {
> /* clear Auto CMD settings for no data CMDs */
> diff --git a/include/linux/mmc/mmc.h b/include/linux/mmc/mmc.h
> index d9a65c6a8816..d809bdfcc59b 100644
> --- a/include/linux/mmc/mmc.h
> +++ b/include/linux/mmc/mmc.h
> @@ -99,6 +99,12 @@ static inline bool mmc_op_multi(u32 opcode)
> opcode == MMC_READ_MULTIPLE_BLOCK;
> }
>
> +static inline bool mmc_op_tuning(u32 opcode)
> +{
> + return opcode == MMC_SEND_TUNING_BLOCK ||
> + opcode == MMC_SEND_TUNING_BLOCK_HS200;
> +}
> +

Patches for mmc should be based on Ulf's next branch:

https://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc.git/log/?h=next

which already has mmc_op_tuning()

> /*
> * MMC_SWITCH argument format:
> *