2022-11-07 13:44:47

by Sinthu Raja

[permalink] [raw]
Subject: [PATCH V2 0/3] AM68 SK: Add initial support

From: Sinthu Raja <[email protected]>

Hi,
This series of patches add support for AM68 Starter kit(SK). AM68 SK
is a low cost, small form factor board designed for TI’s J721S2/AM68 SoC.

Refer below link to J721S2/AM68 Technical Reference Manual for further details:
http://www.ti.com/lit/pdf/spruj28

Design files can be referrred from https://www.ti.com/lit/zip/SPRR463

Changes in V2:
Addressed all the review comments and the changes are captured in seperate patches.
- Updated the commit description.
- Updated the regulator nodes: fixedregulator to "regulator-"
- Updated the commit $subject to align with rest of the commits.
- Dropped the blank lines
- Changed the node names that are added with underscore("_") with "-"

V1: https://lore.kernel.org/linux-arm-kernel/[email protected]/t/#mbe43b02221733bb6eb06b203359e90ec08406afc

Sinthu Raja (3):
dt-bindings: arm: ti: Add binding for AM68 SK
arm64: dts: ti: Add initial support for AM68 SK System on Module
arm64: dts: ti: k3-am68-sk: Add support for AM68 SK base board

.../devicetree/bindings/arm/ti/k3.yaml | 1 +
arch/arm64/boot/dts/ti/Makefile | 2 +
.../boot/dts/ti/k3-am68-sk-base-board.dts | 447 ++++++++++++++++++
arch/arm64/boot/dts/ti/k3-am68-sk-som.dtsi | 127 +++++
4 files changed, 577 insertions(+)
create mode 100644 arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts
create mode 100644 arch/arm64/boot/dts/ti/k3-am68-sk-som.dtsi

--
2.36.1