A driver that supports I2C_DRV_ACPI_WAIVE_D0_PROBE is not expected to
power off a device that it has not powered on previously.
For devices operating in "full_power" mode, the first call to
`i2c_acpi_waive_d0_probe` will return 0, which means that the device
will be turned on with `dev_pm_domain_attach`.
If probe fails, the second call to `i2c_acpi_waive_d0_probe` will return
1, which means that the device will not be turned off. This is, it will
be left in a different power state. Lets fix it.
Fixes: b18c1ad685d9 ("i2c: Allow an ACPI driver to manage the device's power state during probe")
Signed-off-by: Ricardo Ribalda <[email protected]>
diff --git a/drivers/i2c/i2c-core-base.c b/drivers/i2c/i2c-core-base.c
index b4edf10e8fd0..be59c40f5beb 100644
--- a/drivers/i2c/i2c-core-base.c
+++ b/drivers/i2c/i2c-core-base.c
@@ -467,6 +467,7 @@ static int i2c_device_probe(struct device *dev)
{
struct i2c_client *client = i2c_verify_client(dev);
struct i2c_driver *driver;
+ bool do_power_on;
int status;
if (!client)
@@ -545,8 +546,8 @@ static int i2c_device_probe(struct device *dev)
if (status < 0)
goto err_clear_wakeup_irq;
- status = dev_pm_domain_attach(&client->dev,
- !i2c_acpi_waive_d0_probe(dev));
+ do_power_on = !i2c_acpi_waive_d0_probe(dev);
+ status = dev_pm_domain_attach(&client->dev, do_power_on);
if (status)
goto err_clear_wakeup_irq;
@@ -585,7 +586,7 @@ static int i2c_device_probe(struct device *dev)
err_release_driver_resources:
devres_release_group(&client->dev, client->devres_group_id);
err_detach_pm_domain:
- dev_pm_domain_detach(&client->dev, !i2c_acpi_waive_d0_probe(dev));
+ dev_pm_domain_detach(&client->dev, do_power_on);
err_clear_wakeup_irq:
dev_pm_clear_wake_irq(&client->dev);
device_init_wakeup(&client->dev, false);
--
b4 0.11.0-dev-d93f8