The UP board <http://www.upboard.com> is the computer board for
Professional Makers and Industrial Applications. We want to upstream
the UP board 40-pin GP-bus Kernel driver for giving the users better
experience on the software release. (not just download from UP board
github)
These patches are generated from the Linux kernel mainline tag v6.0.
Change history
(1) PATCH V3 1 (mfd: Add support for UP board CPLD/FPGA)
Fixed kernel test robot compiler warning.
(2) PATCH V3 2 (pinctrl: Add support pin control for UP board CPLD/FPGA)
PATCH V3 3 (leds : Add support for UP board CPLD onboard LEDS)
There is no change.
old :
(1) PATCH V2 1 (mfd: Add support for UP board CPLD/FPGA)
Refer 2022/10/31 Lee Jones review, fixed some of the issues.
(2) PATCH V2 2 (pinctrl: Add support pin control for UP board CPLD/FPGA)
Refer 2022/10/19 Mark Brown and Andy Shevchenko review, fixed some of
the issues.
(3) PATCH V2 3 (leds : Add support for UP board CPLD onboard LEDS)
We did git send-email this patch to maintainer on 2022/10/11 for reviewing.
there's no change on this LED PATCH V2.
chengwei (3):
mfd: Add support for UP board CPLD/FPGA
pinctrl: Add support pin control for UP board CPLD/FPGA
leds: Add support for UP board CPLD onboard LEDS
drivers/leds/Kconfig | 10 +
drivers/leds/Makefile | 1 +
drivers/leds/leds-upboard.c | 78 ++
drivers/mfd/Kconfig | 12 +
drivers/mfd/Makefile | 1 +
drivers/mfd/upboard-fpga.c | 620 +++++++++++
drivers/pinctrl/Kconfig | 15 +
drivers/pinctrl/Makefile | 1 +
drivers/pinctrl/pinctrl-upboard.c | 1588 +++++++++++++++++++++++++++++
include/linux/mfd/upboard-fpga.h | 56 +
10 files changed, 2382 insertions(+)
create mode 100644 drivers/leds/leds-upboard.c
create mode 100644 drivers/mfd/upboard-fpga.c
create mode 100644 drivers/pinctrl/pinctrl-upboard.c
create mode 100644 include/linux/mfd/upboard-fpga.h
base-commit: 4fe89d07dcc2804c8b562f6c7896a45643d34b2f
--
2.17.1
The UP Squared board <http://www.upboard.com> implements certain
features (pin control) through an on-board FPGA.
PATCH V3:
There's no change.
PATCH V2:
(1) Synchronized with upboard github to rc2
(2) Refer 2022/10/19 Mark Brown and Andy Shevchenko review, we removed
the regmap and acpi patches and implement in upboard pinctrl driver.
(3) Refer 2022/10/19 Andy Shevchenko review, fixed the coding style
issues, removed using gpio_xxxx API and removed including <linux/gpio.h>.
Signed-off-by: Javier Arteaga <[email protected]>
[merge various fixes]
Signed-off-by: Nicola Lunghi <[email protected]>
Signed-off-by: chengwei <[email protected]>
---
drivers/pinctrl/Kconfig | 15 +
drivers/pinctrl/Makefile | 1 +
drivers/pinctrl/pinctrl-upboard.c | 1588 +++++++++++++++++++++++++++++
3 files changed, 1604 insertions(+)
create mode 100644 drivers/pinctrl/pinctrl-upboard.c
diff --git a/drivers/pinctrl/Kconfig b/drivers/pinctrl/Kconfig
index 1cf74b0c42e5..5d719eadecdb 100644
--- a/drivers/pinctrl/Kconfig
+++ b/drivers/pinctrl/Kconfig
@@ -483,6 +483,21 @@ config PINCTRL_THUNDERBAY
rate control and direction control. This module will be
called as pinctrl-thunderbay.
+config PINCTRL_UPBOARD
+ tristate "UP board FPGA pin controller"
+ depends on ACPI
+ depends on MFD_UPBOARD_FPGA
+ depends on X86
+ select GENERIC_PINCONF
+ select PINMUX
+ select PINCONF
+ help
+ Pin controller for the FPGA GPIO lines on UP boards. Due to the
+ hardware layout, these are meant to be controlled in tandem with their
+ corresponding Intel SoC GPIOs.
+ To compile this driver as a module, choose M here: the module
+ will be called pinctrl-upboard.
+
config PINCTRL_ZYNQ
bool "Pinctrl driver for Xilinx Zynq"
depends on ARCH_ZYNQ
diff --git a/drivers/pinctrl/Makefile b/drivers/pinctrl/Makefile
index e76f5cdc64b0..c366706d36e7 100644
--- a/drivers/pinctrl/Makefile
+++ b/drivers/pinctrl/Makefile
@@ -48,6 +48,7 @@ obj-$(CONFIG_PINCTRL_STMFX) += pinctrl-stmfx.o
obj-$(CONFIG_PINCTRL_SX150X) += pinctrl-sx150x.o
obj-$(CONFIG_PINCTRL_TB10X) += pinctrl-tb10x.o
obj-$(CONFIG_PINCTRL_THUNDERBAY) += pinctrl-thunderbay.o
+obj-$(CONFIG_PINCTRL_UPBOARD) += pinctrl-upboard.o
obj-$(CONFIG_PINCTRL_ZYNQMP) += pinctrl-zynqmp.o
obj-$(CONFIG_PINCTRL_ZYNQ) += pinctrl-zynq.o
diff --git a/drivers/pinctrl/pinctrl-upboard.c b/drivers/pinctrl/pinctrl-upboard.c
new file mode 100644
index 000000000000..71ed4eba0b6e
--- /dev/null
+++ b/drivers/pinctrl/pinctrl-upboard.c
@@ -0,0 +1,1588 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * UP Board FPGA-based pin controller driver
+ *
+ * Copyright (c) 2017, Emutex Ltd. All rights reserved.
+ *
+ * Authors: Javier Arteaga <[email protected]>
+ * Dan O'Donovan <[email protected]>
+ * Nicola Lunghi <[email protected]>
+ * Gary Wang <[email protected]>
+ */
+
+#include <linux/acpi.h>
+#include <linux/dmi.h>
+#include <linux/gpio/consumer.h>
+#include <linux/gpio/driver.h>
+#include <linux/kernel.h>
+#include <linux/mfd/upboard-fpga.h>
+#include <linux/module.h>
+#include <linux/pinctrl/pinctrl.h>
+#include <linux/pinctrl/pinmux.h>
+#include <linux/platform_device.h>
+#include <linux/regmap.h>
+#include <linux/interrupt.h>
+#include <linux/string.h>
+
+#include "core.h"
+
+/* Offset from regs */
+#define REVID 0x000
+#define REVID_SHIFT 16
+#define REVID_MASK GENMASK(31, 16)
+
+#define CAPLIST 0x004
+#define CAPLIST_ID_SHIFT 16
+#define CAPLIST_ID_MASK GENMASK(23, 16)
+#define CAPLIST_ID_GPIO_HW_INFO 1
+#define CAPLIST_ID_PWM 2
+#define CAPLIST_ID_BLINK 3
+#define CAPLIST_ID_EXP 4
+#define CAPLIST_NEXT_SHIFT 0
+#define CAPLIST_NEXT_MASK GENMASK(15, 0)
+
+#define PADBAR 0x00c
+
+#define PADOWN_BITS 4
+#define PADOWN_SHIFT(p) ((p) % 8 * PADOWN_BITS)
+#define PADOWN_MASK(p) (GENMASK(3, 0) << PADOWN_SHIFT(p))
+#define PADOWN_GPP(p) ((p) / 8)
+
+/* Offset from pad_regs */
+#define PADCFG0 0x000
+#define PADCFG0_RXEVCFG_SHIFT 25
+#define PADCFG0_RXEVCFG_MASK GENMASK(26, 25)
+#define PADCFG0_RXEVCFG_LEVEL 0
+#define PADCFG0_RXEVCFG_EDGE 1
+#define PADCFG0_RXEVCFG_DISABLED 2
+#define PADCFG0_RXEVCFG_EDGE_BOTH 3
+#define PADCFG0_PREGFRXSEL BIT(24)
+#define PADCFG0_RXINV BIT(23)
+#define PADCFG0_GPIROUTIOXAPIC BIT(20)
+#define PADCFG0_GPIROUTSCI BIT(19)
+#define PADCFG0_GPIROUTSMI BIT(18)
+#define PADCFG0_GPIROUTNMI BIT(17)
+#define PADCFG0_PMODE_SHIFT 10
+#define PADCFG0_PMODE_MASK GENMASK(13, 10)
+#define PADCFG0_PMODE_GPIO 0
+#define PADCFG0_GPIORXDIS BIT(9)
+#define PADCFG0_GPIOTXDIS BIT(8)
+#define PADCFG0_GPIORXSTATE BIT(1)
+#define PADCFG0_GPIOTXSTATE BIT(0)
+
+#define PADCFG1 0x004
+#define PADCFG1_TERM_UP BIT(13)
+#define PADCFG1_TERM_SHIFT 10
+#define PADCFG1_TERM_MASK GENMASK(12, 10)
+#define PADCFG1_TERM_20K BIT(2)
+#define PADCFG1_TERM_5K BIT(1)
+#define PADCFG1_TERM_1K BIT(0)
+#define PADCFG1_TERM_833 (BIT(1) | BIT(0))
+
+#define PADCFG2 0x008
+#define PADCFG2_DEBEN BIT(0)
+#define PADCFG2_DEBOUNCE_SHIFT 1
+#define PADCFG2_DEBOUNCE_MASK GENMASK(4, 1)
+
+#define DEBOUNCE_PERIOD_NSEC 31250
+
+/* Additional features supported by the hardware */
+#define PINCTRL_FEATURE_DEBOUNCE BIT(0)
+#define PINCTRL_FEATURE_1K_PD BIT(1)
+
+#define pin_to_padno(c, p) ((p) - (c)->pin_base)
+#define padgroup_offset(g, p) ((p) - (g)->base)
+
+struct intel_pinctrl {
+ struct device *dev;
+ raw_spinlock_t lock;
+ struct pinctrl_desc pctldesc;
+ struct pinctrl_dev *pctldev;
+ struct gpio_chip chip;
+ struct irq_chip irqchip;
+ void *soc;
+ void *communities;
+ size_t ncommunities;
+};
+
+struct upboard_pin {
+ struct regmap_field *funcbit;
+ struct regmap_field *enbit;
+ struct regmap_field *dirbit;
+ unsigned int gpio; //native pin controller number
+ unsigned int base; //native pin controller base
+ int irq; //native pin controller irq
+ void __iomem *regs;
+};
+
+struct upboard_bios {
+ const struct reg_sequence *patches;
+ size_t npatches;
+};
+
+struct upboard_pinctrl {
+ struct gpio_chip chip;
+ struct device *dev;
+ struct pinctrl_dev *pctldev;
+ struct pinctrl_desc *pctldesc;
+ struct upboard_pin *pins;
+ struct regmap *regmap;
+ const unsigned int *rpi_mapping;
+ int ident;
+};
+
+enum upboard_func0_fpgabit {
+ UPFPGA_I2C0_EN = 8,
+ UPFPGA_I2C1_EN = 9,
+ UPFPGA_CEC0_EN = 12,
+ UPFPGA_ADC0_EN = 14,
+};
+
+static const struct reg_field upboard_i2c0_reg =
+ REG_FIELD(UPFPGA_REG_FUNC_EN0, UPFPGA_I2C0_EN, UPFPGA_I2C0_EN);
+
+static const struct reg_field upboard_i2c1_reg =
+ REG_FIELD(UPFPGA_REG_FUNC_EN0, UPFPGA_I2C1_EN, UPFPGA_I2C1_EN);
+
+static const struct reg_field upboard_adc0_reg =
+ REG_FIELD(UPFPGA_REG_FUNC_EN0, UPFPGA_ADC0_EN, UPFPGA_ADC0_EN);
+
+/* Pin group information */
+struct upboard_pingroup {
+ const char *name;
+ const unsigned int *pins;
+ size_t npins;
+};
+
+/* Pin function information */
+struct upboard_function {
+ const char *name;
+ const char * const *groups;
+ size_t ngroups;
+};
+
+#define UPBOARD_BIT_TO_PIN(r, bit) \
+ ((r) * UPFPGA_REGISTER_SIZE + (bit))
+
+/*
+ * UP board data
+ */
+
+#define UPBOARD_UP_BIT_TO_PIN(r, id) (UPBOARD_BIT_TO_PIN(r, UPFPGA_UP_##id))
+
+#define UPBOARD_UP_PIN_ANON(r, bit) \
+ { \
+ .number = UPBOARD_BIT_TO_PIN(r, bit), \
+ }
+
+#define UPBOARD_UP_PIN_NAME(r, id) \
+ { \
+ .number = UPBOARD_UP_BIT_TO_PIN(r, id), \
+ .name = #id, \
+ }
+
+#define UPBOARD_UP_PIN_FUNC(r, id, data) \
+ { \
+ .number = UPBOARD_UP_BIT_TO_PIN(r, id), \
+ .name = #id, \
+ .drv_data = (void *)(data), \
+ }
+
+#define PIN_GROUP(n, p) \
+ { \
+ .name = (n), \
+ .pins = (p), \
+ .npins = ARRAY_SIZE((p)), \
+ }
+
+#define FUNCTION(n, g) \
+ { \
+ .name = (n), \
+ .groups = (g), \
+ .ngroups = ARRAY_SIZE((g)), \
+ }
+
+enum upboard_up_reg1_fpgabit {
+ UPFPGA_UP_I2C1_SDA,
+ UPFPGA_UP_I2C1_SCL,
+ UPFPGA_UP_ADC0,
+ UPFPGA_UP_GPIO17,
+ UPFPGA_UP_GPIO27,
+ UPFPGA_UP_GPIO22,
+ UPFPGA_UP_SPI_MOSI,
+ UPFPGA_UP_SPI_MISO,
+ UPFPGA_UP_SPI_CLK,
+ UPFPGA_UP_I2C0_SDA,
+ UPFPGA_UP_GPIO5,
+ UPFPGA_UP_GPIO6,
+ UPFPGA_UP_PWM1,
+ UPFPGA_UP_I2S_FRM,
+ UPFPGA_UP_GPIO26,
+ UPFPGA_UP_UART1_TX,
+};
+
+enum upboard_up_reg2_fpgabit {
+ UPFPGA_UP_UART1_RX,
+ UPFPGA_UP_I2S_CLK,
+ UPFPGA_UP_GPIO23,
+ UPFPGA_UP_GPIO24,
+ UPFPGA_UP_GPIO25,
+ UPFPGA_UP_SPI_CS0,
+ UPFPGA_UP_SPI_CS1,
+ UPFPGA_UP_I2C0_SCL,
+ UPFPGA_UP_PWM0,
+ UPFPGA_UP_GPIO16,
+ UPFPGA_UP_I2S_DIN,
+ UPFPGA_UP_I2S_DOUT,
+};
+
+#define UPFPGA_UP_UART1_RTS UPFPGA_UP_GPIO17
+#define UPFPGA_UP_UART1_CTS UPFPGA_UP_GPIO16
+
+static struct pinctrl_pin_desc upboard_up_pins[] = {
+ UPBOARD_UP_PIN_FUNC(0, I2C1_SDA, &upboard_i2c1_reg),
+ UPBOARD_UP_PIN_FUNC(0, I2C1_SCL, &upboard_i2c1_reg),
+ UPBOARD_UP_PIN_FUNC(0, ADC0, &upboard_adc0_reg),
+ UPBOARD_UP_PIN_NAME(0, UART1_RTS),
+ UPBOARD_UP_PIN_NAME(0, GPIO27),
+ UPBOARD_UP_PIN_NAME(0, GPIO22),
+ UPBOARD_UP_PIN_NAME(0, SPI_MOSI),
+ UPBOARD_UP_PIN_NAME(0, SPI_MISO),
+ UPBOARD_UP_PIN_NAME(0, SPI_CLK),
+ UPBOARD_UP_PIN_FUNC(0, I2C0_SDA, &upboard_i2c0_reg),
+ UPBOARD_UP_PIN_NAME(0, GPIO5),
+ UPBOARD_UP_PIN_NAME(0, GPIO6),
+ UPBOARD_UP_PIN_NAME(0, PWM1),
+ UPBOARD_UP_PIN_NAME(0, I2S_FRM),
+ UPBOARD_UP_PIN_NAME(0, GPIO26),
+ UPBOARD_UP_PIN_NAME(0, UART1_TX),
+ /* register 1 */
+ UPBOARD_UP_PIN_NAME(1, UART1_RX),
+ UPBOARD_UP_PIN_NAME(1, I2S_CLK),
+ UPBOARD_UP_PIN_NAME(1, GPIO23),
+ UPBOARD_UP_PIN_NAME(1, GPIO24),
+ UPBOARD_UP_PIN_NAME(1, GPIO25),
+ UPBOARD_UP_PIN_NAME(1, SPI_CS0),
+ UPBOARD_UP_PIN_NAME(1, SPI_CS1),
+ UPBOARD_UP_PIN_FUNC(1, I2C0_SCL, &upboard_i2c0_reg),
+ UPBOARD_UP_PIN_NAME(1, PWM0),
+ UPBOARD_UP_PIN_NAME(1, UART1_CTS),
+ UPBOARD_UP_PIN_NAME(1, I2S_DIN),
+ UPBOARD_UP_PIN_NAME(1, I2S_DOUT),
+};
+
+static const unsigned int upboard_up_rpi_mapping[] = {
+ UPBOARD_UP_BIT_TO_PIN(0, I2C0_SDA),
+ UPBOARD_UP_BIT_TO_PIN(1, I2C0_SCL),
+ UPBOARD_UP_BIT_TO_PIN(0, I2C1_SDA),
+ UPBOARD_UP_BIT_TO_PIN(0, I2C1_SCL),
+ UPBOARD_UP_BIT_TO_PIN(0, ADC0),
+ UPBOARD_UP_BIT_TO_PIN(0, GPIO5),
+ UPBOARD_UP_BIT_TO_PIN(0, GPIO6),
+ UPBOARD_UP_BIT_TO_PIN(1, SPI_CS1),
+ UPBOARD_UP_BIT_TO_PIN(1, SPI_CS0),
+ UPBOARD_UP_BIT_TO_PIN(0, SPI_MISO),
+ UPBOARD_UP_BIT_TO_PIN(0, SPI_MOSI),
+ UPBOARD_UP_BIT_TO_PIN(0, SPI_CLK),
+ UPBOARD_UP_BIT_TO_PIN(1, PWM0),
+ UPBOARD_UP_BIT_TO_PIN(0, PWM1),
+ UPBOARD_UP_BIT_TO_PIN(0, UART1_TX),
+ UPBOARD_UP_BIT_TO_PIN(1, UART1_RX),
+ UPBOARD_UP_BIT_TO_PIN(1, GPIO16),
+ UPBOARD_UP_BIT_TO_PIN(0, GPIO17),
+ UPBOARD_UP_BIT_TO_PIN(1, I2S_CLK),
+ UPBOARD_UP_BIT_TO_PIN(0, I2S_FRM),
+ UPBOARD_UP_BIT_TO_PIN(1, I2S_DIN),
+ UPBOARD_UP_BIT_TO_PIN(1, I2S_DOUT),
+ UPBOARD_UP_BIT_TO_PIN(0, GPIO22),
+ UPBOARD_UP_BIT_TO_PIN(1, GPIO23),
+ UPBOARD_UP_BIT_TO_PIN(1, GPIO24),
+ UPBOARD_UP_BIT_TO_PIN(1, GPIO25),
+ UPBOARD_UP_BIT_TO_PIN(0, GPIO26),
+ UPBOARD_UP_BIT_TO_PIN(0, GPIO27),
+};
+
+static const unsigned int uart1_pins[] = { 14, 15, 16, 17 };
+static const unsigned int uart2_pins[] = { 25, 27 };
+static const unsigned int i2c0_pins[] = { 0, 1 };
+static const unsigned int i2c1_pins[] = { 2, 3 };
+static const unsigned int spi2_pins[] = { 8, 9, 10, 11 };
+static const unsigned int i2s0_pins[] = { 18, 19, 20, 21 };
+static const unsigned int pwm0_pins[] = { 12 };
+static const unsigned int pwm1_pins[] = { 13 };
+static const unsigned int adc0_pins[] = { 4 };
+
+static const struct upboard_pingroup pin_groups[] = {
+ PIN_GROUP("uart1_grp", uart1_pins),
+ PIN_GROUP("uart2_grp", uart2_pins),
+ PIN_GROUP("i2c0_grp", i2c0_pins),
+ PIN_GROUP("i2c1_grp", i2c1_pins),
+ PIN_GROUP("spi2_grp", spi2_pins),
+ PIN_GROUP("i2s0_grp", i2s0_pins),
+ PIN_GROUP("pwm0_grp", pwm0_pins),
+ PIN_GROUP("pwm1_grp", pwm1_pins),
+ PIN_GROUP("adc0_grp", adc0_pins),
+};
+
+static const char * const uart1_groups[] = { "uart1_grp" };
+static const char * const uart2_groups[] = { "uart2_grp" };
+static const char * const i2c0_groups[] = { "i2c0_grp" };
+static const char * const i2c1_groups[] = { "i2c1_grp" };
+static const char * const spi2_groups[] = { "spi2_grp" };
+static const char * const i2s0_groups[] = { "i2s0_grp" };
+static const char * const pwm0_groups[] = { "pwm0_grp" };
+static const char * const pwm1_groups[] = { "pwm1_grp" };
+static const char * const adc0_groups[] = { "adc0_grp" };
+
+static const struct upboard_function pin_functions[] = {
+ FUNCTION("uart1", uart1_groups),
+ FUNCTION("uart2", uart2_groups),
+ FUNCTION("i2c0", i2c0_groups),
+ FUNCTION("i2c1", i2c1_groups),
+ FUNCTION("spi2", spi2_groups),
+ FUNCTION("i2s0", i2s0_groups),
+ FUNCTION("pwm0", pwm0_groups),
+ FUNCTION("pwm1", pwm1_groups),
+ FUNCTION("adc0", adc0_groups),
+};
+
+
+/*
+ * Init patches applied to the registers until the BIOS sets proper defaults
+ */
+static const struct reg_sequence upboard_up_reg_patches[] __initconst = {
+ { UPFPGA_REG_FUNC_EN0,
+ // enable I2C voltage-level shifters
+ BIT(UPFPGA_I2C0_EN) |
+ BIT(UPFPGA_I2C1_EN) |
+ // enable adc
+ BIT(UPFPGA_ADC0_EN)
+ },
+ /* HAT function pins initially set as inputs */
+ { UPFPGA_REG_GPIO_DIR0,
+ BIT(UPFPGA_UP_I2C1_SDA) |
+ BIT(UPFPGA_UP_I2C1_SCL) |
+ BIT(UPFPGA_UP_ADC0) |
+ BIT(UPFPGA_UP_GPIO27) |
+ BIT(UPFPGA_UP_GPIO22) |
+ BIT(UPFPGA_UP_SPI_MISO) |
+ BIT(UPFPGA_UP_I2C0_SDA) |
+ BIT(UPFPGA_UP_GPIO5) |
+ BIT(UPFPGA_UP_GPIO6) |
+ BIT(UPFPGA_UP_GPIO26)
+ },
+ { UPFPGA_REG_GPIO_DIR1,
+ BIT(UPFPGA_UP_UART1_RX) |
+ BIT(UPFPGA_UP_GPIO23) |
+ BIT(UPFPGA_UP_GPIO24) |
+ BIT(UPFPGA_UP_GPIO25) |
+ BIT(UPFPGA_UP_I2C0_SCL) |
+ BIT(UPFPGA_UP_GPIO16) |
+ BIT(UPFPGA_UP_I2S_DIN)
+ },
+};
+
+static const struct upboard_bios upboard_up_bios_info_dvt __initconst = {
+ .patches = upboard_up_reg_patches,
+ .npatches = ARRAY_SIZE(upboard_up_reg_patches),
+};
+
+/*
+ * UP^2 board data
+ */
+
+#define UPBOARD_UP2_BIT_TO_PIN(r, id) (UPBOARD_BIT_TO_PIN(r, UPFPGA_UP2_##id))
+
+#define UPBOARD_UP2_PIN_ANON(r, bit) \
+ { \
+ .number = UPBOARD_BIT_TO_PIN(r, bit), \
+ .name = "NONAME", \
+ }
+
+#define UPBOARD_UP2_PIN_NAME(r, id) \
+ { \
+ .number = UPBOARD_UP2_BIT_TO_PIN(r, id), \
+ .name = #id, \
+ }
+
+#define UPBOARD_UP2_PIN_FUNC(r, id, data) \
+ { \
+ .number = UPBOARD_UP2_BIT_TO_PIN(r, id), \
+ .name = #id, \
+ .drv_data = (void *)(data), \
+ }
+
+enum upboard_up2_reg0_fpgabit {
+ UPFPGA_UP2_UART1_TXD,
+ UPFPGA_UP2_UART1_RXD,
+ UPFPGA_UP2_UART1_RTS,
+ UPFPGA_UP2_UART1_CTS,
+ UPFPGA_UP2_GPIO3,
+ UPFPGA_UP2_GPIO5,
+ UPFPGA_UP2_GPIO6,
+ UPFPGA_UP2_GPIO11,
+ UPFPGA_UP2_EXHAT_LVDS1n,
+ UPFPGA_UP2_EXHAT_LVDS1p,
+ UPFPGA_UP2_SPI2_TXD,
+ UPFPGA_UP2_SPI2_RXD,
+ UPFPGA_UP2_SPI2_FS1,
+ UPFPGA_UP2_SPI2_FS0,
+ UPFPGA_UP2_SPI2_CLK,
+ UPFPGA_UP2_SPI1_TXD,
+};
+
+enum upboard_up2_reg1_fpgabit {
+ UPFPGA_UP2_SPI1_RXD,
+ UPFPGA_UP2_SPI1_FS1,
+ UPFPGA_UP2_SPI1_FS0,
+ UPFPGA_UP2_SPI1_CLK,
+ UPFPGA_UP2_BIT20,
+ UPFPGA_UP2_BIT21,
+ UPFPGA_UP2_BIT22,
+ UPFPGA_UP2_BIT23,
+ UPFPGA_UP2_PWM1,
+ UPFPGA_UP2_PWM0,
+ UPFPGA_UP2_EXHAT_LVDS0n,
+ UPFPGA_UP2_EXHAT_LVDS0p,
+ UPFPGA_UP2_I2C0_SCL,
+ UPFPGA_UP2_I2C0_SDA,
+ UPFPGA_UP2_I2C1_SCL,
+ UPFPGA_UP2_I2C1_SDA,
+};
+
+enum upboard_up2_reg2_fpgabit {
+ UPFPGA_UP2_EXHAT_LVDS3n,
+ UPFPGA_UP2_EXHAT_LVDS3p,
+ UPFPGA_UP2_EXHAT_LVDS4n,
+ UPFPGA_UP2_EXHAT_LVDS4p,
+ UPFPGA_UP2_EXHAT_LVDS5n,
+ UPFPGA_UP2_EXHAT_LVDS5p,
+ UPFPGA_UP2_I2S_SDO,
+ UPFPGA_UP2_I2S_SDI,
+ UPFPGA_UP2_I2S_WS_SYNC,
+ UPFPGA_UP2_I2S_BCLK,
+ UPFPGA_UP2_EXHAT_LVDS6n,
+ UPFPGA_UP2_EXHAT_LVDS6p,
+ UPFPGA_UP2_EXHAT_LVDS7n,
+ UPFPGA_UP2_EXHAT_LVDS7p,
+ UPFPGA_UP2_EXHAT_LVDS2n,
+ UPFPGA_UP2_EXHAT_LVDS2p,
+};
+
+static struct pinctrl_pin_desc upboard_up2_pins[] = {
+ UPBOARD_UP2_PIN_NAME(0, UART1_TXD),
+ UPBOARD_UP2_PIN_NAME(0, UART1_RXD),
+ UPBOARD_UP2_PIN_NAME(0, UART1_RTS),
+ UPBOARD_UP2_PIN_NAME(0, UART1_CTS),
+ UPBOARD_UP2_PIN_NAME(0, GPIO3),
+ UPBOARD_UP2_PIN_NAME(0, GPIO5),
+ UPBOARD_UP2_PIN_NAME(0, GPIO6),
+ UPBOARD_UP2_PIN_NAME(0, GPIO11),
+ UPBOARD_UP2_PIN_NAME(0, EXHAT_LVDS1n),
+ UPBOARD_UP2_PIN_NAME(0, EXHAT_LVDS1p),
+ UPBOARD_UP2_PIN_NAME(0, SPI2_TXD),
+ UPBOARD_UP2_PIN_NAME(0, SPI2_RXD),
+ UPBOARD_UP2_PIN_NAME(0, SPI2_FS1),
+ UPBOARD_UP2_PIN_NAME(0, SPI2_FS0),
+ UPBOARD_UP2_PIN_NAME(0, SPI2_CLK),
+ UPBOARD_UP2_PIN_NAME(0, SPI1_TXD),
+ UPBOARD_UP2_PIN_NAME(1, SPI1_RXD),
+ UPBOARD_UP2_PIN_NAME(1, SPI1_FS1),
+ UPBOARD_UP2_PIN_NAME(1, SPI1_FS0),
+ UPBOARD_UP2_PIN_NAME(1, SPI1_CLK),
+ UPBOARD_UP2_PIN_ANON(1, 4),
+ UPBOARD_UP2_PIN_ANON(1, 5),
+ UPBOARD_UP2_PIN_ANON(1, 6),
+ UPBOARD_UP2_PIN_ANON(1, 7),
+ UPBOARD_UP2_PIN_NAME(1, PWM1),
+ UPBOARD_UP2_PIN_NAME(1, PWM0),
+ UPBOARD_UP2_PIN_NAME(1, EXHAT_LVDS0n),
+ UPBOARD_UP2_PIN_NAME(1, EXHAT_LVDS0p),
+ UPBOARD_UP2_PIN_FUNC(1, I2C0_SCL, &upboard_i2c0_reg),
+ UPBOARD_UP2_PIN_FUNC(1, I2C0_SDA, &upboard_i2c0_reg),
+ UPBOARD_UP2_PIN_FUNC(1, I2C1_SCL, &upboard_i2c1_reg),
+ UPBOARD_UP2_PIN_FUNC(1, I2C1_SDA, &upboard_i2c1_reg),
+ UPBOARD_UP2_PIN_NAME(2, EXHAT_LVDS3n),
+ UPBOARD_UP2_PIN_NAME(2, EXHAT_LVDS3p),
+ UPBOARD_UP2_PIN_NAME(2, EXHAT_LVDS4n),
+ UPBOARD_UP2_PIN_NAME(2, EXHAT_LVDS4p),
+ UPBOARD_UP2_PIN_NAME(2, EXHAT_LVDS5n),
+ UPBOARD_UP2_PIN_NAME(2, EXHAT_LVDS5p),
+ UPBOARD_UP2_PIN_NAME(2, I2S_SDO),
+ UPBOARD_UP2_PIN_NAME(2, I2S_SDI),
+ UPBOARD_UP2_PIN_NAME(2, I2S_WS_SYNC),
+ UPBOARD_UP2_PIN_NAME(2, I2S_BCLK),
+ UPBOARD_UP2_PIN_NAME(2, EXHAT_LVDS6n),
+ UPBOARD_UP2_PIN_NAME(2, EXHAT_LVDS6p),
+ UPBOARD_UP2_PIN_NAME(2, EXHAT_LVDS7n),
+ UPBOARD_UP2_PIN_NAME(2, EXHAT_LVDS7p),
+ UPBOARD_UP2_PIN_NAME(2, EXHAT_LVDS2n),
+ UPBOARD_UP2_PIN_NAME(2, EXHAT_LVDS2p),
+};
+
+static const unsigned int upboard_up2_rpi_mapping[] = {
+ UPBOARD_UP2_BIT_TO_PIN(1, I2C0_SDA),
+ UPBOARD_UP2_BIT_TO_PIN(1, I2C0_SCL),
+ UPBOARD_UP2_BIT_TO_PIN(1, I2C1_SDA),
+ UPBOARD_UP2_BIT_TO_PIN(1, I2C1_SCL),
+ UPBOARD_UP2_BIT_TO_PIN(0, GPIO3),
+ UPBOARD_UP2_BIT_TO_PIN(0, GPIO11),
+ UPBOARD_UP2_BIT_TO_PIN(0, SPI2_CLK),
+ UPBOARD_UP2_BIT_TO_PIN(1, SPI1_FS1),
+ UPBOARD_UP2_BIT_TO_PIN(1, SPI1_FS0),
+ UPBOARD_UP2_BIT_TO_PIN(1, SPI1_RXD),
+ UPBOARD_UP2_BIT_TO_PIN(0, SPI1_TXD),
+ UPBOARD_UP2_BIT_TO_PIN(1, SPI1_CLK),
+ UPBOARD_UP2_BIT_TO_PIN(1, PWM0),
+ UPBOARD_UP2_BIT_TO_PIN(1, PWM1),
+ UPBOARD_UP2_BIT_TO_PIN(0, UART1_TXD),
+ UPBOARD_UP2_BIT_TO_PIN(0, UART1_RXD),
+ UPBOARD_UP2_BIT_TO_PIN(0, UART1_CTS),
+ UPBOARD_UP2_BIT_TO_PIN(0, UART1_RTS),
+ UPBOARD_UP2_BIT_TO_PIN(2, I2S_BCLK),
+ UPBOARD_UP2_BIT_TO_PIN(2, I2S_WS_SYNC),
+ UPBOARD_UP2_BIT_TO_PIN(2, I2S_SDI),
+ UPBOARD_UP2_BIT_TO_PIN(2, I2S_SDO),
+ UPBOARD_UP2_BIT_TO_PIN(0, GPIO6),
+ UPBOARD_UP2_BIT_TO_PIN(0, SPI2_FS1),
+ UPBOARD_UP2_BIT_TO_PIN(0, SPI2_RXD),
+ UPBOARD_UP2_BIT_TO_PIN(0, SPI2_TXD),
+ UPBOARD_UP2_BIT_TO_PIN(0, SPI2_FS0),
+ UPBOARD_UP2_BIT_TO_PIN(0, GPIO5),
+};
+
+/*
+ * Init patches applied to the registers until the BIOS sets proper defaults
+ */
+static const struct reg_sequence upboard_up2_reg_patches[] __initconst = {
+ // enable I2C voltage-level shifters
+ { UPFPGA_REG_FUNC_EN0,
+ BIT(UPFPGA_I2C0_EN) |
+ BIT(UPFPGA_I2C1_EN)
+ },
+ // HAT function pins initially set as inputs
+ { UPFPGA_REG_GPIO_DIR0,
+ BIT(UPFPGA_UP2_UART1_RXD) |
+ BIT(UPFPGA_UP2_UART1_CTS)
+ },
+ { UPFPGA_REG_GPIO_DIR1,
+ BIT(UPFPGA_UP2_SPI1_RXD)
+ },
+ // HAT function pins initially enabled (i.e. not hi-Z)
+ { UPFPGA_REG_GPIO_EN0,
+ BIT(UPFPGA_UP2_UART1_TXD) |
+ BIT(UPFPGA_UP2_UART1_RXD) |
+ BIT(UPFPGA_UP2_UART1_RTS) |
+ BIT(UPFPGA_UP2_UART1_CTS) |
+ BIT(UPFPGA_UP2_SPI1_TXD)
+ },
+ { UPFPGA_REG_GPIO_EN1,
+ BIT(UPFPGA_UP2_SPI1_RXD) |
+ BIT(UPFPGA_UP2_SPI1_FS1) |
+ BIT(UPFPGA_UP2_SPI1_FS0) |
+ BIT(UPFPGA_UP2_SPI1_CLK) |
+ BIT(UPFPGA_UP2_PWM1) |
+ BIT(UPFPGA_UP2_PWM0)
+ },
+};
+
+static const struct upboard_bios upboard_up2_bios_info_v0_3 __initconst = {
+ .patches = upboard_up2_reg_patches,
+ .npatches = ARRAY_SIZE(upboard_up2_reg_patches),
+};
+
+/*
+ * UP Core board + CREX carrier board data
+ */
+
+#define UPBOARD_UPCORE_CREX_BIT_TO_PIN(r, id) \
+ (UPBOARD_BIT_TO_PIN(r, UPFPGA_UPCORE_CREX_##id))
+
+#define UPBOARD_UPCORE_CREX_PIN_ANON(r, bit) \
+ { \
+ .number = UPBOARD_BIT_TO_PIN(r, bit), \
+ }
+
+#define UPBOARD_UPCORE_CREX_PIN_NAME(r, id) \
+ { \
+ .number = UPBOARD_UPCORE_CREX_BIT_TO_PIN(r, id), \
+ .name = #id, \
+ }
+
+#define UPBOARD_UPCORE_CREX_PIN_FUNC(r, id, data) \
+ { \
+ .number = UPBOARD_UPCORE_CREX_BIT_TO_PIN(r, id), \
+ .name = #id, \
+ .drv_data = (void *)(data), \
+ }
+
+enum upboard_upcore_crex_reg1_fpgabit {
+ UPFPGA_UPCORE_CREX_I2C0_SDA,
+ UPFPGA_UPCORE_CREX_I2C0_SCL,
+ UPFPGA_UPCORE_CREX_I2C1_SDA,
+ UPFPGA_UPCORE_CREX_I2C1_SCL,
+ UPFPGA_UPCORE_CREX_SPI2_CS0,
+ UPFPGA_UPCORE_CREX_SPI2_CS1,
+ UPFPGA_UPCORE_CREX_SPI2_MOSI,
+ UPFPGA_UPCORE_CREX_SPI2_MISO,
+ UPFPGA_UPCORE_CREX_SPI2_CLK,
+ UPFPGA_UPCORE_CREX_UART1_TXD,
+ UPFPGA_UPCORE_CREX_UART1_RXD,
+ UPFPGA_UPCORE_CREX_PWM0,
+ UPFPGA_UPCORE_CREX_PWM1,
+ UPFPGA_UPCORE_CREX_I2S2_FRM,
+ UPFPGA_UPCORE_CREX_I2S2_CLK,
+ UPFPGA_UPCORE_CREX_I2S2_RX,
+};
+
+enum upboard_upcore_crex_reg2_fpgabit {
+ UPFPGA_UPCORE_CREX_I2S2_TX,
+ UPFPGA_UPCORE_CREX_GPIO0,
+ UPFPGA_UPCORE_CREX_GPIO2,
+ UPFPGA_UPCORE_CREX_GPIO3,
+ UPFPGA_UPCORE_CREX_GPIO4,
+ UPFPGA_UPCORE_CREX_GPIO9,
+};
+
+static struct pinctrl_pin_desc upboard_upcore_crex_pins[] = {
+ UPBOARD_UPCORE_CREX_PIN_FUNC(0, I2C0_SDA, &upboard_i2c0_reg),
+ UPBOARD_UPCORE_CREX_PIN_FUNC(0, I2C0_SCL, &upboard_i2c0_reg),
+ UPBOARD_UPCORE_CREX_PIN_FUNC(0, I2C1_SDA, &upboard_i2c1_reg),
+ UPBOARD_UPCORE_CREX_PIN_FUNC(0, I2C1_SCL, &upboard_i2c1_reg),
+ UPBOARD_UPCORE_CREX_PIN_NAME(0, SPI2_CS0),
+ UPBOARD_UPCORE_CREX_PIN_NAME(0, SPI2_CS1),
+ UPBOARD_UPCORE_CREX_PIN_NAME(0, SPI2_MOSI),
+ UPBOARD_UPCORE_CREX_PIN_NAME(0, SPI2_MISO),
+ UPBOARD_UPCORE_CREX_PIN_NAME(0, SPI2_CLK),
+ UPBOARD_UPCORE_CREX_PIN_NAME(0, UART1_TXD),
+ UPBOARD_UPCORE_CREX_PIN_NAME(0, UART1_RXD),
+ UPBOARD_UPCORE_CREX_PIN_NAME(0, PWM0),
+ UPBOARD_UPCORE_CREX_PIN_NAME(0, PWM1),
+ UPBOARD_UPCORE_CREX_PIN_NAME(0, I2S2_FRM),
+ UPBOARD_UPCORE_CREX_PIN_NAME(0, I2S2_CLK),
+ UPBOARD_UPCORE_CREX_PIN_NAME(0, I2S2_RX),
+ /* register 1 */
+ UPBOARD_UPCORE_CREX_PIN_NAME(1, I2S2_TX),
+ UPBOARD_UPCORE_CREX_PIN_NAME(1, GPIO0),
+ UPBOARD_UPCORE_CREX_PIN_FUNC(1, GPIO2, &upboard_adc0_reg),
+ UPBOARD_UPCORE_CREX_PIN_NAME(1, GPIO3),
+ UPBOARD_UPCORE_CREX_PIN_NAME(1, GPIO4),
+ UPBOARD_UPCORE_CREX_PIN_NAME(1, GPIO9),
+};
+
+static unsigned int upboard_upcore_crex_rpi_mapping[] = {
+ UPBOARD_UPCORE_CREX_BIT_TO_PIN(0, I2C0_SDA),
+ UPBOARD_UPCORE_CREX_BIT_TO_PIN(0, I2C0_SCL),
+ UPBOARD_UPCORE_CREX_BIT_TO_PIN(0, I2C1_SDA),
+ UPBOARD_UPCORE_CREX_BIT_TO_PIN(0, I2C1_SCL),
+ UPBOARD_UPCORE_CREX_BIT_TO_PIN(1, GPIO0),
+ UPBOARD_UPCORE_CREX_BIT_TO_PIN(1, GPIO2),
+ UPBOARD_UPCORE_CREX_BIT_TO_PIN(1, GPIO3),
+ UPBOARD_UPCORE_CREX_BIT_TO_PIN(0, SPI2_CS1),
+ UPBOARD_UPCORE_CREX_BIT_TO_PIN(0, SPI2_CS0),
+ UPBOARD_UPCORE_CREX_BIT_TO_PIN(0, SPI2_MISO),
+ UPBOARD_UPCORE_CREX_BIT_TO_PIN(0, SPI2_MOSI),
+ UPBOARD_UPCORE_CREX_BIT_TO_PIN(0, SPI2_CLK),
+ UPBOARD_UPCORE_CREX_BIT_TO_PIN(0, PWM0),
+ UPBOARD_UPCORE_CREX_BIT_TO_PIN(0, PWM1),
+ UPBOARD_UPCORE_CREX_BIT_TO_PIN(0, UART1_TXD),
+ UPBOARD_UPCORE_CREX_BIT_TO_PIN(0, UART1_RXD),
+ UPBOARD_UPCORE_CREX_BIT_TO_PIN(1, GPIO9),
+ UPBOARD_UPCORE_CREX_BIT_TO_PIN(1, GPIO4),
+ UPBOARD_UPCORE_CREX_BIT_TO_PIN(0, I2S2_CLK),
+ UPBOARD_UPCORE_CREX_BIT_TO_PIN(0, I2S2_FRM),
+ UPBOARD_UPCORE_CREX_BIT_TO_PIN(0, I2S2_RX),
+ UPBOARD_UPCORE_CREX_BIT_TO_PIN(1, I2S2_TX),
+};
+
+/*
+ * Init patches applied to the registers until the BIOS sets proper defaults
+ */
+static const struct reg_sequence upboard_upcore_crex_reg_patches[] __initconst = {
+ // enable I2C voltage-level shifters
+ { UPFPGA_REG_FUNC_EN0,
+ BIT(UPFPGA_I2C0_EN) |
+ BIT(UPFPGA_I2C1_EN)
+ },
+ // HAT function pins initially set as inputs
+ { UPFPGA_REG_GPIO_DIR0,
+ BIT(UPFPGA_UPCORE_CREX_SPI2_MISO) |
+ BIT(UPFPGA_UPCORE_CREX_UART1_RXD) |
+ BIT(UPFPGA_UPCORE_CREX_I2S2_FRM) |
+ BIT(UPFPGA_UPCORE_CREX_I2S2_CLK) |
+ BIT(UPFPGA_UPCORE_CREX_I2S2_RX)
+ },
+};
+
+static const struct upboard_bios upboard_upcore_crex_bios_info __initconst = {
+ .patches = upboard_upcore_crex_reg_patches,
+ .npatches = ARRAY_SIZE(upboard_upcore_crex_reg_patches),
+};
+
+/*
+ * UP Core board + CRST02 carrier board data
+ */
+
+#define upboard_upcore_crst02_pins upboard_upcore_crex_pins
+#define upboard_upcore_crst02_rpi_mapping upboard_upcore_crex_rpi_mapping
+
+/*
+ * Init patches applied to the registers until the BIOS sets proper defaults
+ */
+static const struct reg_sequence upboard_upcore_crst02_reg_patches[] __initconst = {
+ // enable I2C voltage-level shifters
+ { UPFPGA_REG_FUNC_EN0,
+ BIT(UPFPGA_I2C0_EN) |
+ BIT(UPFPGA_I2C1_EN)
+ },
+ // HAT function pins initially set as inputs
+ { UPFPGA_REG_GPIO_DIR0,
+ BIT(UPFPGA_UPCORE_CREX_SPI2_MISO) |
+ BIT(UPFPGA_UPCORE_CREX_UART1_RXD) |
+ BIT(UPFPGA_UPCORE_CREX_I2S2_FRM) |
+ BIT(UPFPGA_UPCORE_CREX_I2S2_CLK) |
+ BIT(UPFPGA_UPCORE_CREX_I2S2_RX)
+ },
+ // HAT function pins initially enabled (i.e. not hi-Z)
+ { UPFPGA_REG_GPIO_EN0,
+ BIT(UPFPGA_UPCORE_CREX_SPI2_CS0) |
+ BIT(UPFPGA_UPCORE_CREX_SPI2_MOSI) |
+ BIT(UPFPGA_UPCORE_CREX_SPI2_MISO) |
+ BIT(UPFPGA_UPCORE_CREX_SPI2_CLK) |
+ BIT(UPFPGA_UPCORE_CREX_UART1_TXD) |
+ BIT(UPFPGA_UPCORE_CREX_UART1_RXD) |
+ BIT(UPFPGA_UPCORE_CREX_PWM0) |
+ BIT(UPFPGA_UPCORE_CREX_PWM1) |
+ BIT(UPFPGA_UPCORE_CREX_I2S2_FRM) |
+ BIT(UPFPGA_UPCORE_CREX_I2S2_CLK) |
+ BIT(UPFPGA_UPCORE_CREX_I2S2_RX)
+ },
+ { UPFPGA_REG_GPIO_EN1,
+ BIT(UPFPGA_UPCORE_CREX_I2S2_TX)
+ },
+};
+
+static const struct upboard_bios upboard_upcore_crst02_bios_info __initconst = {
+ .patches = upboard_upcore_crst02_reg_patches,
+ .npatches = ARRAY_SIZE(upboard_upcore_crst02_reg_patches),
+};
+
+static int upboard_set_mux(struct pinctrl_dev *pctldev, unsigned int function,
+ unsigned int group)
+{
+ return 0;
+};
+
+static int upboard_fpga_request_enable(struct pinctrl_dev *pctldev,
+ struct pinctrl_gpio_range *range,
+ unsigned int pin)
+{
+ const struct pin_desc * const pd = pin_desc_get(pctldev, pin);
+ const struct upboard_pin *p;
+ int ret;
+
+ if (!pd)
+ return -EINVAL;
+
+ p = pd->drv_data;
+ if (p->funcbit) {
+ ret = regmap_field_write(p->funcbit, 0);
+ if (ret)
+ return ret;
+ }
+
+ if (p->enbit) {
+ ret = regmap_field_write(p->enbit, 1);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+};
+
+static int upboard_fpga_request_free(struct pinctrl_dev *pctldev,
+ unsigned int pin)
+{
+ const struct pin_desc * const pd = pin_desc_get(pctldev, pin);
+ const struct upboard_pin *p;
+ int ret;
+
+ if (!pd)
+ return -EINVAL;
+
+ p = pd->drv_data;
+ if (p->funcbit) {
+ ret = regmap_field_write(p->funcbit, 1);
+ if (ret)
+ return ret;
+ }
+
+ if (p->enbit) {
+ ret = regmap_field_write(p->enbit, 0);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+};
+
+static int upboard_fpga_set_direction(struct pinctrl_dev *pctldev,
+ struct pinctrl_gpio_range *range,
+ unsigned int pin, bool input)
+{
+ const struct pin_desc * const pd = pin_desc_get(pctldev, pin);
+ const struct upboard_pin *p;
+
+ if (!pd)
+ return -EINVAL;
+
+ p = pd->drv_data;
+ upboard_fpga_request_enable(pctldev, range, pin);
+
+ return regmap_field_write(p->dirbit, input);
+};
+
+static int upboard_get_functions_count(struct pinctrl_dev *pctldev)
+{
+ //dev_info(pctldev->dev,"upboard_get_functions_count");
+ return 0;
+}
+
+static const char *upboard_get_function_name(struct pinctrl_dev *pctldev,
+ unsigned int selector)
+{
+ //dev_info(pctldev->dev,"upboard_get_function_name:%d",selector);
+ return NULL;
+}
+
+static int upboard_get_function_groups(struct pinctrl_dev *pctldev,
+ unsigned int selector,
+ const char * const **groups,
+ unsigned int *num_groups)
+{
+ *groups = NULL;
+ *num_groups = 0;
+ return 0;
+}
+
+static const struct pinmux_ops upboard_pinmux_ops = {
+ .get_functions_count = upboard_get_functions_count,
+ .get_function_groups = upboard_get_function_groups,
+ .get_function_name = upboard_get_function_name,
+ .set_mux = upboard_set_mux,
+ .gpio_request_enable = upboard_fpga_request_enable,
+ .gpio_set_direction = upboard_fpga_set_direction,
+};
+
+static int upboard_get_groups_count(struct pinctrl_dev *pctldev)
+{
+ return 0;
+}
+
+static const char *upboard_get_group_name(struct pinctrl_dev *pctldev,
+ unsigned int selector)
+{
+ return NULL;
+}
+
+static const struct pinctrl_ops upboard_pinctrl_ops = {
+ .get_groups_count = upboard_get_groups_count,
+ .get_group_name = upboard_get_group_name,
+};
+
+static struct pinctrl_desc upboard_up_pinctrl_desc = {
+ .pins = upboard_up_pins,
+ .npins = ARRAY_SIZE(upboard_up_pins),
+ .pctlops = &upboard_pinctrl_ops,
+ .pmxops = &upboard_pinmux_ops,
+ .owner = THIS_MODULE,
+};
+
+static struct pinctrl_desc upboard_up2_pinctrl_desc = {
+ .pins = upboard_up2_pins,
+ .npins = ARRAY_SIZE(upboard_up2_pins),
+ .pctlops = &upboard_pinctrl_ops,
+ .pmxops = &upboard_pinmux_ops,
+ .owner = THIS_MODULE,
+};
+
+static struct pinctrl_desc upboard_upcore_crex_pinctrl_desc = {
+ .pins = upboard_upcore_crex_pins,
+ .npins = ARRAY_SIZE(upboard_upcore_crex_pins),
+ .pctlops = &upboard_pinctrl_ops,
+ .pmxops = &upboard_pinmux_ops,
+ .owner = THIS_MODULE,
+};
+
+static struct pinctrl_desc upboard_upcore_crst02_pinctrl_desc = {
+ .pins = upboard_upcore_crst02_pins,
+ .npins = ARRAY_SIZE(upboard_upcore_crst02_pins),
+ .pctlops = &upboard_pinctrl_ops,
+ .pmxops = &upboard_pinmux_ops,
+ .owner = THIS_MODULE,
+};
+
+static void upboard_alt_func_enable(struct gpio_chip *gc, const char *name)
+{
+ struct upboard_pinctrl *pctrl = container_of(gc, struct upboard_pinctrl, chip);
+ int offset[gc->ngpio];
+ int i, j, cnt;
+ bool input = false;
+
+ //find all pins
+ for (i = 0, cnt = 0; i < pctrl->pctldesc->npins; i++) {
+ if (strstr(pctrl->pctldesc->pins[i].name, name))
+ offset[cnt++] = i;
+ }
+ for (i = 0; i < cnt; i++) {
+ if (pinctrl_gpio_request(pctrl->pins[offset[i]].gpio) == -EBUSY)
+ return; //used
+ pinctrl_gpio_free(pctrl->pins[offset[i]].gpio);
+ }
+ //change to alternate function
+ for (i = 0; i < cnt; i++) {
+ if (pctrl->pins[offset[i]].regs == NULL)
+ continue;
+
+ if (strstr(pctrl->pctldesc->pins[offset[i]].name, "I2C")) {
+ int mode = 1;
+ unsigned int val;
+
+ switch (pctrl->ident) {
+ case 15:
+ mode = 2;
+ break;
+ }
+
+ val = readl(pctrl->pins[offset[i]].regs) |
+ mode<<PADCFG0_PMODE_SHIFT;
+ writel(val, pctrl->pins[offset[i]].regs);
+ upboard_fpga_request_free(pctrl->pctldev, offset[i]);
+ continue;
+ } else if (strstr(pctrl->pctldesc->pins[offset[i]].name,
+ "UART")) {
+ int mode = 1;
+ unsigned int val;
+
+ switch (pctrl->ident) {
+ case 13:
+ case 14:
+ mode = 4;
+ break;
+ case 15:
+ mode = 2;
+ break;
+ }
+
+ val = readl(pctrl->pins[offset[i]].regs) |
+ mode<<PADCFG0_PMODE_SHIFT;
+ writel(val, pctrl->pins[offset[i]].regs);
+ } else if (strstr(pctrl->pctldesc->pins[offset[i]].name,
+ "SPI")) {
+ int mode = 1;
+ unsigned int val;
+
+ switch (pctrl->ident) {
+ case 15:
+ mode = 7;
+ break;
+ }
+
+ val = readl(pctrl->pins[offset[i]].regs) |
+ mode<<PADCFG0_PMODE_SHIFT;
+ writel(val, pctrl->pins[offset[i]].regs);
+ } else if (strstr(pctrl->pctldesc->pins[offset[i]].name,
+ "I2S")) {
+ int mode = 1;
+ unsigned int val;
+
+ switch (pctrl->ident) {
+ case 15:
+ mode = 4;
+ break;
+ }
+
+ val = readl(pctrl->pins[offset[i]].regs) |
+ mode<<PADCFG0_PMODE_SHIFT;
+ writel(val, pctrl->pins[offset[i]].regs);
+ } else {
+ unsigned int val;
+
+ val = readl(pctrl->pins[offset[i]].regs) |
+ 1<<PADCFG0_PMODE_SHIFT;
+ writel(val, pctrl->pins[offset[i]].regs);
+ }
+
+ //input pins
+ if (strstr(pctrl->pctldesc->pins[offset[i]].name, "RX"))
+ input = true;
+ if (strstr(pctrl->pctldesc->pins[offset[i]].name, "CTS"))
+ input = true;
+ if (strstr(pctrl->pctldesc->pins[offset[i]].name, "ADC"))
+ input = true;
+ if (strstr(pctrl->pctldesc->pins[offset[i]].name, "MISO"))
+ input = true;
+ if (strstr(pctrl->pctldesc->pins[offset[i]].name, "DIN"))
+ input = true;
+ upboard_fpga_set_direction(pctrl->pctldev, NULL, offset[i],
+ input);
+ }
+}
+
+static int upboard_rpi_to_native_gpio(struct gpio_chip *gc, unsigned int gpio)
+{
+ struct upboard_pinctrl *pctrl = container_of(gc, struct upboard_pinctrl, chip);
+ unsigned int pin = pctrl->rpi_mapping[gpio];
+ struct pinctrl_gpio_range *range;
+
+ range = pinctrl_find_gpio_range_from_pin(pctrl->pctldev, pin);
+ if (!range)
+ return -ENODEV;
+
+ return range->base;
+}
+
+static int upboard_gpio_request(struct gpio_chip *gc, unsigned int offset)
+{
+ struct upboard_pinctrl *pctrl = container_of(gc, struct upboard_pinctrl, chip);
+ int gpio = upboard_rpi_to_native_gpio(gc, offset);
+
+ if (gpio < 0)
+ return gpio;
+
+ return pinctrl_gpio_request(gpio);
+}
+
+static void upboard_gpio_free(struct gpio_chip *gc, unsigned int offset)
+{
+ struct upboard_pinctrl *pctrl = container_of(gc, struct upboard_pinctrl, chip);
+ int gpio = upboard_rpi_to_native_gpio(gc, offset);
+ unsigned int pin = pctrl->rpi_mapping[offset];
+ char name[strlen(pctrl->pctldesc->pins[pin].name)];
+ char *p;
+
+ if (gpio < 0)
+ return;
+
+ pinctrl_gpio_free(gpio);
+
+ strcpy(name, pctrl->pctldesc->pins[pin].name);
+ p = name;
+ upboard_alt_func_enable(gc, strsep(&p, "_"));
+}
+
+static int upboard_gpio_get(struct gpio_chip *gc, unsigned int offset)
+{
+ int gpio = upboard_rpi_to_native_gpio(gc, offset);
+
+ if (gpio < 0)
+ return gpio;
+
+ return gpiod_get_value(gpio_to_desc(gpio));
+}
+
+static void upboard_gpio_set(struct gpio_chip *gc, unsigned int offset,
+ int value)
+{
+ struct upboard_pinctrl *pctrl = container_of(gc, struct upboard_pinctrl, chip);
+ unsigned int pin = pctrl->rpi_mapping[offset];
+ int gpio = upboard_rpi_to_native_gpio(gc, offset);
+
+ if (gpio < 0)
+ return;
+
+ gpiod_set_value(gpio_to_desc(gpio), value);
+
+ //APL03 open drain GPIO
+ if (pctrl->ident == 9) {
+ if (pin == 0 || pin == 1) {
+ int val = readl(pctrl->pins[pin].regs);
+
+ if (value)
+ val |= PADCFG0_GPIOTXDIS;
+ else
+ val &= ~PADCFG0_GPIOTXDIS;
+ writel(val, pctrl->pins[pin].regs);
+ }
+ }
+}
+
+static int upboard_gpio_direction_input(struct gpio_chip *gc,
+ unsigned int offset)
+{
+ int gpio = upboard_rpi_to_native_gpio(gc, offset);
+ struct upboard_pinctrl *pctrl = container_of(gc, struct upboard_pinctrl, chip);
+ unsigned int pin = pctrl->rpi_mapping[offset];
+ struct pinctrl_gpio_range *range;
+
+ range = pinctrl_find_gpio_range_from_pin(pctrl->pctldev, pin);
+ upboard_fpga_set_direction(pctrl->pctldev, range, pin, true);
+
+ if (gpio < 0)
+ return gpio;
+
+ return gpiod_direction_input(gpio_to_desc(gpio));
+}
+
+static int upboard_gpio_direction_output(struct gpio_chip *gc,
+ unsigned int offset, int value)
+{
+ int gpio = upboard_rpi_to_native_gpio(gc, offset);
+ struct upboard_pinctrl *pctrl = container_of(gc, struct upboard_pinctrl, chip);
+ unsigned int pin = pctrl->rpi_mapping[offset];
+ struct pinctrl_gpio_range *range;
+
+ range = pinctrl_find_gpio_range_from_pin(pctrl->pctldev, pin);
+ upboard_fpga_set_direction(pctrl->pctldev, range, pin, false);
+
+ if (gpio < 0)
+ return gpio;
+
+ return gpiod_direction_output(gpio_to_desc(gpio), value);
+}
+
+static struct gpio_chip upboard_gpio_chip = {
+ .label = "Raspberry Pi compatible UP GPIO",
+ .base = 0,
+ .request = upboard_gpio_request,
+ .free = upboard_gpio_free,
+ .get = upboard_gpio_get,
+ .set = upboard_gpio_set,
+ .direction_input = upboard_gpio_direction_input,
+ .direction_output = upboard_gpio_direction_output,
+ .owner = THIS_MODULE,
+};
+
+/* DMI Matches for older bios without fpga initialization */
+static const struct dmi_system_id upboard_dmi_table[] __initconst = {
+ {
+ .matches = { /* UP */
+ DMI_EXACT_MATCH(DMI_SYS_VENDOR, "AAEON"),
+ DMI_EXACT_MATCH(DMI_BOARD_NAME, "UP-CHT01"),
+ DMI_EXACT_MATCH(DMI_BOARD_VERSION, "V0.4"),
+ },
+ .driver_data = (void *)&upboard_up_bios_info_dvt,
+ },
+ {
+ .matches = { /* UP2 */
+ DMI_EXACT_MATCH(DMI_SYS_VENDOR, "AAEON"),
+ DMI_EXACT_MATCH(DMI_BOARD_NAME, "UP-APL01"),
+ DMI_EXACT_MATCH(DMI_BOARD_VERSION, "V0.3"),
+ },
+ .driver_data = (void *)&upboard_up2_bios_info_v0_3,
+ },
+ {
+ .ident = 9,
+ .matches = { /* UP2 */
+ DMI_EXACT_MATCH(DMI_SYS_VENDOR, "AAEON"),
+ DMI_EXACT_MATCH(DMI_BOARD_NAME, "UP-APL03"),
+ },
+ },
+ {
+ .ident = 13,
+ .matches = { /* UP 6000 */
+ DMI_EXACT_MATCH(DMI_SYS_VENDOR, "AAEON"),
+ DMI_EXACT_MATCH(DMI_BOARD_NAME, "UPN-EHL01"),
+ },
+ },
+ {
+ .ident = 14,
+ .matches = { /* UP squared v2 */
+ DMI_EXACT_MATCH(DMI_SYS_VENDOR, "AAEON"),
+ DMI_EXACT_MATCH(DMI_BOARD_NAME, "UPS-EHL01"),
+ },
+ },
+ {
+ .ident = 15,
+ .matches = { /* UP Xtreme i12 */
+ DMI_EXACT_MATCH(DMI_SYS_VENDOR, "AAEON"),
+ DMI_EXACT_MATCH(DMI_BOARD_NAME, "UPX-ADLP01"),
+ },
+ },
+ { } /* Terminating entry */
+};
+
+bool regmap_check_writeable(struct upboard_fpga *fpga, unsigned int reg)
+{
+ if (!fpga)
+ return -ENOMEM;
+
+ if (fpga->regmapconf->max_register &&
+ reg > fpga->regmapconf->max_register)
+ return false;
+
+ if (fpga->regmapconf->writeable_reg)
+ return fpga->regmapconf->writeable_reg(fpga->dev, reg);
+
+ if (fpga->regmapconf->wr_table)
+ return regmap_check_range_table(fpga->regmap, reg,
+ fpga->regmapconf->wr_table);
+
+ return true;
+}
+
+static void __iomem *upboard_get_regs(struct gpio_chip *gc, unsigned int pin,
+ unsigned int reg)
+{
+ struct platform_device *pdev = to_platform_device(gc->parent);
+ struct resource *res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ size_t nregs;
+ void __iomem *base;
+ u32 offset, value;
+
+ //UP ADL/TGL
+ if (strstr(dev_name(&pdev->dev), "INTC1055:00") ||
+ strstr(dev_name(&pdev->dev), "INT34C5:00")) {
+ struct intel_pinctrl *intel_pctrl = gpiochip_get_data(gc);
+ struct pinctrl_dev *pctldev;
+ struct pinctrl_gpio_range *range;
+
+ //of_pinctrl_get(gc->parent->of_node);
+ pctldev = intel_pctrl->pctldev;
+ if (pctldev == NULL)
+ return NULL;
+
+ range = pinctrl_find_gpio_range_from_pin(pctldev, pin);
+ if (range)
+ pin = pin - range->pin_base;
+ else
+ return NULL;
+
+ if (range->pin_base < 67)
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ else if (range->pin_base < 171)
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ else if (range->pin_base < 260)
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 2);
+ else
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 3);
+ }
+
+ if (IS_ERR(res)) {
+ dev_info(gc->parent, "upboard resource get failed");
+ return NULL;
+ }
+
+ base = devm_ioremap(&pdev->dev, res->start, resource_size(res));
+ offset = readl(base + PADBAR);
+ value = readl(base + REVID);
+
+ if (((value & REVID_MASK) >> REVID_SHIFT) >= 0x94)
+ nregs = 4;
+ else
+ nregs = 2;
+
+ return base + offset + reg + pin * nregs * 4;
+}
+
+int upboard_acpi_node_pin_mapping(struct upboard_fpga *fpga,
+ struct upboard_pinctrl *pctrl,
+ const char *propname,
+ const char *pinctl_name,
+ unsigned int pin_offset)
+{
+ struct gpio_descs *descs;
+ int ret, i;
+
+ descs = devm_gpiod_get_array(fpga->dev, propname, GPIOD_ASIS);
+ if (IS_ERR(descs)) {
+ ret = PTR_ERR(descs);
+ if (ret != -EPROBE_DEFER)
+ dev_err(fpga->dev, "Failed to get %s gpios", propname);
+ return ret;
+ }
+
+ for (i = 0; i < descs->ndescs; i++) {
+ struct gpio_desc *desc = descs->desc[i];
+ struct gpio_chip *gc = gpiod_to_chip(desc);
+
+ //if (IS_ERR(desc))
+ // return PTR_ERR(desc);
+ pctrl->pins[i].gpio = desc_to_gpio(desc);
+ pctrl->pins[i].base = gc->base;
+ pctrl->pins[i].irq = gpiod_to_irq(desc);
+ pctrl->pins[i].regs =
+ upboard_get_regs(gc,
+ desc_to_gpio(desc) - gc->base,
+ PADCFG0);
+
+ /* The GPIOs may not be contiguous, so add them 1-by-1 */
+ ret = gpiochip_add_pin_range(gpiod_to_chip(desc), pinctl_name,
+ desc_to_gpio(desc) - gc->base,
+ pin_offset + i, 1);
+ if (ret)
+ return ret;
+ }
+
+ //dispose acpi resource
+ devm_gpiod_put_array(fpga->dev, descs);
+
+ return ret;
+}
+
+static void upboard_irq_ack(struct irq_data *d)
+{
+ struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+
+ dev_info(NULL, "upboard_irq_ack");
+}
+
+static void upboard_irq_mask(struct irq_data *d)
+{
+ struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+
+ dev_info(NULL, "upboard_irq_mask");
+}
+
+static void upboard_irq_unmask(struct irq_data *d)
+{
+ struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+
+ switch (irqd_get_trigger_type(d)) {
+ case IRQ_TYPE_LEVEL_HIGH:
+ //value |= BYT_TRIG_LVL;
+ fallthrough;
+ case IRQ_TYPE_EDGE_RISING:
+ //value |= BYT_TRIG_POS;
+ break;
+ case IRQ_TYPE_LEVEL_LOW:
+ //value |= BYT_TRIG_LVL;
+ fallthrough;
+ case IRQ_TYPE_EDGE_FALLING:
+ //value |= BYT_TRIG_NEG;
+ break;
+ case IRQ_TYPE_EDGE_BOTH:
+ //value |= (BYT_TRIG_NEG | BYT_TRIG_POS);
+ break;
+ }
+
+ dev_info(NULL, "upboard_irq_unmask");
+}
+
+static int upboard_irq_type(struct irq_data *d, unsigned int type)
+{
+ struct gpio_chip *gc = irq_data_get_irq_chip_data(d);
+
+ dev_info(NULL, "upboard_irq_type");
+
+ return 0;
+}
+
+static irqreturn_t upboard_gpio_irq_handler(int irq, void *data)
+{
+ //struct up_pin_info *pin = (struct up_pin_info *)data;
+
+ generic_handle_irq(irq);
+ return IRQ_HANDLED;
+}
+
+static int upboard_irq_chip_set_type(struct irq_data *data, unsigned int type)
+{
+ struct gpio_chip *gc = irq_data_get_irq_chip_data(data);
+ struct upboard_pinctrl *pctrl = container_of(gc, struct upboard_pinctrl, chip);
+ unsigned int offset = irqd_to_hwirq(data);
+
+ data->parent_data = irq_get_irq_data(pctrl->pins[offset].irq);
+ if (data->parent_data) {
+ dev_info(NULL, "%s: no NULL", __func__);
+ return irq_chip_set_type_parent(data, type);
+ }
+
+ dev_info(NULL, "%s: NULL", __func__);
+ return 0;
+}
+
+static struct irq_chip upboard_gpio_irqchip = {
+ .name = "upboard-gpio-irq",
+ .irq_ack = upboard_irq_ack,
+ .irq_mask = upboard_irq_mask,
+ .irq_unmask = upboard_irq_unmask,
+ .irq_set_type = upboard_irq_chip_set_type,
+ .flags = IRQCHIP_MASK_ON_SUSPEND | IRQCHIP_SKIP_SET_WAKE,
+};
+
+static int __init upboard_pinctrl_probe(struct platform_device *pdev)
+{
+ struct upboard_fpga * const fpga = dev_get_drvdata(pdev->dev.parent);
+ struct acpi_device * const adev = ACPI_COMPANION(&pdev->dev);
+ struct pinctrl_desc *pctldesc;
+ const struct upboard_bios *bios_info = NULL;
+ struct upboard_pinctrl *pctrl;
+ struct upboard_pin *pins;
+ const struct dmi_system_id *system_id;
+ const char *hid;
+ const unsigned int *rpi_mapping;
+ unsigned int ngpio;
+ int ret;
+ int i;
+
+ if (!fpga)
+ return -EINVAL;
+
+ if (!adev)
+ return -ENODEV;
+
+ hid = acpi_device_hid(adev);
+ if (!strcmp(hid, "AANT0F00") || !strcmp(hid, "AANT0F04") ||
+ !strcmp(hid, "AANT0000")) {
+ pctldesc = &upboard_up_pinctrl_desc;
+ rpi_mapping = upboard_up_rpi_mapping;
+ ngpio = ARRAY_SIZE(upboard_up_rpi_mapping);
+ } else if (!strcmp(hid, "AANT0F01")) {
+ pctldesc = &upboard_up2_pinctrl_desc;
+ rpi_mapping = upboard_up2_rpi_mapping;
+ ngpio = ARRAY_SIZE(upboard_up2_rpi_mapping);
+ } else if (!strcmp(hid, "AANT0F02")) {
+ pctldesc = &upboard_upcore_crex_pinctrl_desc;
+ rpi_mapping = upboard_upcore_crex_rpi_mapping;
+ ngpio = ARRAY_SIZE(upboard_upcore_crex_rpi_mapping);
+ bios_info = &upboard_upcore_crex_bios_info;
+ } else if (!strcmp(hid, "AANT0F03")) {
+ pctldesc = &upboard_upcore_crst02_pinctrl_desc;
+ rpi_mapping = upboard_upcore_crst02_rpi_mapping;
+ ngpio = ARRAY_SIZE(upboard_upcore_crst02_rpi_mapping);
+ bios_info = &upboard_upcore_crst02_bios_info;
+ } else
+ return -ENODEV;
+
+ pctldesc->name = dev_name(&pdev->dev);
+
+ pins = devm_kzalloc(&pdev->dev,
+ sizeof(*pins) * pctldesc->npins,
+ GFP_KERNEL);
+ if (!pins)
+ return -ENOMEM;
+
+ /* initialise pins */
+ for (i = 0; i < pctldesc->npins; i++) {
+ struct upboard_pin *pin = &pins[i];
+ struct pinctrl_pin_desc *pd =
+ (struct pinctrl_pin_desc *) &pctldesc->pins[i];
+ struct reg_field fldconf = {0};
+ unsigned int regoff = (pd->number / UPFPGA_REGISTER_SIZE);
+ unsigned int lsb = pd->number % UPFPGA_REGISTER_SIZE;
+
+ pin->funcbit = NULL;
+
+ if (pd->drv_data) {
+ fldconf = *(struct reg_field *)pd->drv_data;
+ if (!regmap_check_writeable(fpga, fldconf.reg))
+ return -EINVAL;
+
+ pin->funcbit = devm_regmap_field_alloc(&pdev->dev,
+ fpga->regmap,
+ fldconf);
+ if (IS_ERR(pin->funcbit))
+ return PTR_ERR(pin->funcbit);
+ }
+
+ pin->enbit = NULL;
+ fldconf.reg = UPFPGA_REG_GPIO_EN0 + regoff;
+ fldconf.lsb = lsb;
+ fldconf.msb = lsb;
+
+ /* some platform don't have enable bit, ignore if not present */
+ if (regmap_check_writeable(fpga, fldconf.reg)) {
+ pin->enbit = devm_regmap_field_alloc(&pdev->dev,
+ fpga->regmap,
+ fldconf);
+ if (IS_ERR(pin->enbit))
+ return PTR_ERR(pin->enbit);
+ }
+
+ fldconf.reg = UPFPGA_REG_GPIO_DIR0 + regoff;
+ fldconf.lsb = lsb;
+ fldconf.msb = lsb;
+
+ if (!regmap_check_writeable(fpga, fldconf.reg))
+ return -EINVAL;
+
+ pin->dirbit = devm_regmap_field_alloc(&pdev->dev,
+ fpga->regmap,
+ fldconf);
+ if (IS_ERR(pin->dirbit))
+ return PTR_ERR(pin->dirbit);
+
+ pd->drv_data = pin;
+ }
+
+ /* create a new pinctrl device and register it */
+ pctrl = devm_kzalloc(&pdev->dev, sizeof(*pctrl), GFP_KERNEL);
+ if (!pctrl)
+ return -ENOMEM;
+
+ pctrl->regmap = fpga->regmap;
+ pctrl->rpi_mapping = rpi_mapping;
+ pctrl->chip = upboard_gpio_chip;
+ pctrl->pctldesc = pctldesc;
+ pctrl->chip.parent = &pdev->dev;
+ pctrl->chip.ngpio = ngpio;
+ pctrl->pins = pins;
+ pctrl->chip.irq.chip = &upboard_gpio_irqchip;
+
+ ret = devm_gpiochip_add_data(&pdev->dev, &pctrl->chip, pctrl);
+ if (ret)
+ return ret;
+
+ pctrl->pctldev = devm_pinctrl_register(&pdev->dev, pctldesc, pctrl);
+ if (IS_ERR(pctrl->pctldev))
+ return PTR_ERR(pctrl->pctldev);
+
+ /* add acpi pin mapping according to external-gpios key */
+ ret = upboard_acpi_node_pin_mapping(fpga, pctrl,
+ "external",
+ dev_name(&pdev->dev),
+ 0);
+ if (ret)
+ return ret;
+
+ if (!bios_info) {
+ // check for special board version that require register patches
+ system_id = dmi_first_match(upboard_dmi_table);
+ if (system_id) {
+ bios_info = system_id->driver_data;
+ pctrl->ident = system_id->ident;
+ }
+ }
+
+ if (bios_info && bios_info->patches) {
+ ret = regmap_register_patch(pctrl->regmap,
+ bios_info->patches,
+ bios_info->npatches);
+ if (ret)
+ return ret;
+ }
+
+ upboard_alt_func_enable(&pctrl->chip, "I2C");
+ upboard_alt_func_enable(&pctrl->chip, "SPI");
+ upboard_alt_func_enable(&pctrl->chip, "UART");
+ upboard_alt_func_enable(&pctrl->chip, "I2S");
+ upboard_alt_func_enable(&pctrl->chip, "PWM");
+ upboard_alt_func_enable(&pctrl->chip, "ADC");
+ upboard_alt_func_enable(&pctrl->chip, "NONAME"); //for UP2 I2C pins
+
+ //display mapping info.
+ //for(i=0;i<pctldesc->npins;i++){
+ // dev_info(&pdev->dev,"Name:%s, GPIO:%d, IRQ:%d, regs:0x%08x",
+ // pctldesc->pins[i].name,pins[i].gpio, pins[i].irq, pins[i].regs);
+ // if(pins[i].regs)
+ // dev_info(&pdev->dev,"val:%pS", readl(pins[i].regs));
+ //}
+
+ return ret;
+}
+
+static struct platform_driver upboard_pinctrl_driver = {
+ .driver = {
+ .name = "upboard-pinctrl",
+ },
+};
+module_platform_driver_probe(upboard_pinctrl_driver, upboard_pinctrl_probe);
+
+MODULE_AUTHOR("Gary Wang <[email protected]>");
+MODULE_AUTHOR("Javier Arteaga <[email protected]>");
+MODULE_AUTHOR("Dan O'Donovan <[email protected]>");
+MODULE_AUTHOR("Nicola Lunghi <[email protected]>");
+MODULE_DESCRIPTION("UP Board HAT pin controller driver");
+MODULE_LICENSE("GPL v2");
+MODULE_ALIAS("platform:upboard-pinctrl");
--
2.17.1