From: Qi Liu <[email protected]>
This patch bring in documentation for UltraSoc SMB drivers.
It simply describes the device, sysfs interface and the
firmware bindings.
Signed-off-by: Qi Liu <[email protected]>
Signed-off-by: Junhao He <[email protected]>
---
.../sysfs-bus-coresight-devices-ultra_smb | 31 +++++++
.../trace/coresight/ultrasoc-smb.rst | 80 +++++++++++++++++++
2 files changed, 111 insertions(+)
create mode 100644 Documentation/ABI/testing/sysfs-bus-coresight-devices-ultra_smb
create mode 100644 Documentation/trace/coresight/ultrasoc-smb.rst
diff --git a/Documentation/ABI/testing/sysfs-bus-coresight-devices-ultra_smb b/Documentation/ABI/testing/sysfs-bus-coresight-devices-ultra_smb
new file mode 100644
index 000000000000..deaefd508105
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-bus-coresight-devices-ultra_smb
@@ -0,0 +1,31 @@
+What: /sys/bus/coresight/devices/ultra_smb<N>/enable_sink
+Date: November 2022
+KernelVersion: 6.2
+Contact: Junhao He <[email protected]>
+Description: (RW) Add/remove a SMB device from a trace path. There can be
+ multiple sources for a single SMB device.
+
+What: /sys/bus/coresight/devices/ultra_smb<N>/mgmt/buf_size
+Date: November 2022
+KernelVersion: 6.2
+Contact: Junhao He <[email protected]>
+Description: (Read) Shows the buffer size of each UltraSoc SMB device.
+
+What: /sys/bus/coresight/devices/ultra_smb<N>/mgmt/buf_status
+Date: November 2022
+KernelVersion: 6.2
+Contact: Junhao He <[email protected]>
+Description: (Read) Shows the value held by UltraSoc SMB status register.
+ BIT(0) is zero means buffer is empty.
+
+What: /sys/bus/coresight/devices/ultra_smb<N>/mgmt/read_pos
+Date: November 2022
+KernelVersion: 6.2
+Contact: Junhao He <[email protected]>
+Description: (Read) Shows the value held by UltraSoc SMB Read Pointer register.
+
+What: /sys/bus/coresight/devices/ultra_smb<N>/mgmt/write_pos
+Date: November 2022
+KernelVersion: 6.2
+Contact: Junhao He <[email protected]>
+Description: (Read) Shows the value held by UltraSoc SMB Write Pointer register.
diff --git a/Documentation/trace/coresight/ultrasoc-smb.rst b/Documentation/trace/coresight/ultrasoc-smb.rst
new file mode 100644
index 000000000000..6d28ef0f6c88
--- /dev/null
+++ b/Documentation/trace/coresight/ultrasoc-smb.rst
@@ -0,0 +1,80 @@
+.. SPDX-License-Identifier: GPL-2.0
+
+======================================
+UltraSoc - HW Assisted Tracing on SoC
+======================================
+ :Author: Qi Liu <[email protected]>
+ :Date: March 2022
+
+Introduction
+------------
+
+UltraSoc SMB is a per SCCL(Super CPU Cluster) hardware, and it provides a
+way to buffer and store CPU trace messages in a region of shared system
+memory. SMB is plugged as a coresight sink device and the corresponding
+trace generators (ETM) are plugged in as source devices.
+
+Sysfs files and directories
+---------------------------
+
+The SMB devices appear on the existing coresight bus alongside the other
+coresight devices::
+
+ $# ls /sys/bus/coresight/devices/
+ ultra_smb0 ultra_smb1 ultra_smb2 ultra_smb3
+
+The ``ultra_smb<N>`` named SMB associated with SCCL.::
+
+ $# ls /sys/bus/coresight/devices/ultra_smb0
+ enable_sink mgmt
+ $# ls /sys/bus/coresight/devices/ultra_smb0/mgmt
+ buf_size buf_status read_pos write_pos
+
+*Key file items are:-*
+ * ``read_pos``: Shows the value held by UltraSoc SMB Read Pointer register.
+ * ``write_pos``: Shows the value held by UltraSoc SMB Write Pointer register.
+ * ``buf_status``: Shows the value held by UltraSoc SMB status register.
+ BIT(0) is zero means buffer is empty.
+ * ``buf_size``: Shows the buffer size of each UltraSoc SMB device.
+
+Firmware Bindings
+---------------------------
+
+SMB device is only supported with ACPI, and ACPI binding of SMB device
+describes SMB device indentifier, resource information and graph structure.
+
+SMB is identified by ACPI HID "HISI03A1", resource of device is declared using
+the _CRS method. Each SMB must present two base address, the first one is the
+configuration base address of SMB device, the second one is the base address of
+shared system memory.
+
+examples::
+
+ Device(USMB) { \
+ Name(_HID, "HISI03A1") \
+ Name(_CRS, ResourceTemplate() { \
+ MEM_RESRC(0x95100000, 0x951FFFFF, 0x100000) \
+ MEM_RESRC(0x50000000, 0x53FFFFFF, 0x4000000) \
+ }) \
+ Name(_DSD, Package() { \
+ ToUUID("ab02a46b-74c7-45a2-bd68-f7d344ef2153"), \
+ /* Use CoreSight Graph ACPI bindings to describe connections topology */
+ Package() { \
+ 0, \
+ 1, \
+ Package() { \
+ 1, \
+ ToUUID("3ecbc8b6-1d0e-4fb3-8107-e627f805c6cd"), \
+ 8, \
+ Package() {0x8, 0, \_SB.S00.SL11.CL28.F008, 0}, \
+ Package() {0x9, 0, \_SB.S00.SL11.CL29.F009, 0}, \
+ Package() {0xa, 0, \_SB.S00.SL11.CL2A.F010, 0}, \
+ Package() {0xb, 0, \_SB.S00.SL11.CL2B.F011, 0}, \
+ Package() {0xc, 0, \_SB.S00.SL11.CL2C.F012, 0}, \
+ Package() {0xd, 0, \_SB.S00.SL11.CL2D.F013, 0}, \
+ Package() {0xe, 0, \_SB.S00.SL11.CL2E.F014, 0}, \
+ Package() {0xf, 0, \_SB.S00.SL11.CL2F.F015, 0}, \
+ } \
+ } \
+ }) \
+ }
--
2.33.0
On Wed, 9 Nov 2022 21:50:08 +0800
Junhao He <[email protected]> wrote:
> From: Qi Liu <[email protected]>
>
> This patch bring in documentation for UltraSoc SMB drivers.
> It simply describes the device, sysfs interface and the
> firmware bindings.
>
> Signed-off-by: Qi Liu <[email protected]>
> Signed-off-by: Junhao He <[email protected]>
LTGM
Reviewed-by: Jonathan Cameron <[email protected]>
Thanks,
Jonathan
> ---
> .../sysfs-bus-coresight-devices-ultra_smb | 31 +++++++
> .../trace/coresight/ultrasoc-smb.rst | 80 +++++++++++++++++++
> 2 files changed, 111 insertions(+)
> create mode 100644 Documentation/ABI/testing/sysfs-bus-coresight-devices-ultra_smb
> create mode 100644 Documentation/trace/coresight/ultrasoc-smb.rst
>
> diff --git a/Documentation/ABI/testing/sysfs-bus-coresight-devices-ultra_smb b/Documentation/ABI/testing/sysfs-bus-coresight-devices-ultra_smb
> new file mode 100644
> index 000000000000..deaefd508105
> --- /dev/null
> +++ b/Documentation/ABI/testing/sysfs-bus-coresight-devices-ultra_smb
> @@ -0,0 +1,31 @@
> +What: /sys/bus/coresight/devices/ultra_smb<N>/enable_sink
> +Date: November 2022
> +KernelVersion: 6.2
> +Contact: Junhao He <[email protected]>
> +Description: (RW) Add/remove a SMB device from a trace path. There can be
> + multiple sources for a single SMB device.
> +
> +What: /sys/bus/coresight/devices/ultra_smb<N>/mgmt/buf_size
> +Date: November 2022
> +KernelVersion: 6.2
> +Contact: Junhao He <[email protected]>
> +Description: (Read) Shows the buffer size of each UltraSoc SMB device.
> +
> +What: /sys/bus/coresight/devices/ultra_smb<N>/mgmt/buf_status
> +Date: November 2022
> +KernelVersion: 6.2
> +Contact: Junhao He <[email protected]>
> +Description: (Read) Shows the value held by UltraSoc SMB status register.
> + BIT(0) is zero means buffer is empty.
> +
> +What: /sys/bus/coresight/devices/ultra_smb<N>/mgmt/read_pos
> +Date: November 2022
> +KernelVersion: 6.2
> +Contact: Junhao He <[email protected]>
> +Description: (Read) Shows the value held by UltraSoc SMB Read Pointer register.
> +
> +What: /sys/bus/coresight/devices/ultra_smb<N>/mgmt/write_pos
> +Date: November 2022
> +KernelVersion: 6.2
> +Contact: Junhao He <[email protected]>
> +Description: (Read) Shows the value held by UltraSoc SMB Write Pointer register.
> diff --git a/Documentation/trace/coresight/ultrasoc-smb.rst b/Documentation/trace/coresight/ultrasoc-smb.rst
> new file mode 100644
> index 000000000000..6d28ef0f6c88
> --- /dev/null
> +++ b/Documentation/trace/coresight/ultrasoc-smb.rst
> @@ -0,0 +1,80 @@
> +.. SPDX-License-Identifier: GPL-2.0
> +
> +======================================
> +UltraSoc - HW Assisted Tracing on SoC
> +======================================
> + :Author: Qi Liu <[email protected]>
> + :Date: March 2022
> +
> +Introduction
> +------------
> +
> +UltraSoc SMB is a per SCCL(Super CPU Cluster) hardware, and it provides a
> +way to buffer and store CPU trace messages in a region of shared system
> +memory. SMB is plugged as a coresight sink device and the corresponding
> +trace generators (ETM) are plugged in as source devices.
> +
> +Sysfs files and directories
> +---------------------------
> +
> +The SMB devices appear on the existing coresight bus alongside the other
> +coresight devices::
> +
> + $# ls /sys/bus/coresight/devices/
> + ultra_smb0 ultra_smb1 ultra_smb2 ultra_smb3
> +
> +The ``ultra_smb<N>`` named SMB associated with SCCL.::
> +
> + $# ls /sys/bus/coresight/devices/ultra_smb0
> + enable_sink mgmt
> + $# ls /sys/bus/coresight/devices/ultra_smb0/mgmt
> + buf_size buf_status read_pos write_pos
> +
> +*Key file items are:-*
> + * ``read_pos``: Shows the value held by UltraSoc SMB Read Pointer register.
> + * ``write_pos``: Shows the value held by UltraSoc SMB Write Pointer register.
> + * ``buf_status``: Shows the value held by UltraSoc SMB status register.
> + BIT(0) is zero means buffer is empty.
> + * ``buf_size``: Shows the buffer size of each UltraSoc SMB device.
> +
> +Firmware Bindings
> +---------------------------
> +
> +SMB device is only supported with ACPI, and ACPI binding of SMB device
> +describes SMB device indentifier, resource information and graph structure.
> +
> +SMB is identified by ACPI HID "HISI03A1", resource of device is declared using
> +the _CRS method. Each SMB must present two base address, the first one is the
> +configuration base address of SMB device, the second one is the base address of
> +shared system memory.
> +
> +examples::
> +
> + Device(USMB) { \
> + Name(_HID, "HISI03A1") \
> + Name(_CRS, ResourceTemplate() { \
> + MEM_RESRC(0x95100000, 0x951FFFFF, 0x100000) \
> + MEM_RESRC(0x50000000, 0x53FFFFFF, 0x4000000) \
> + }) \
> + Name(_DSD, Package() { \
> + ToUUID("ab02a46b-74c7-45a2-bd68-f7d344ef2153"), \
> + /* Use CoreSight Graph ACPI bindings to describe connections topology */
> + Package() { \
> + 0, \
> + 1, \
> + Package() { \
> + 1, \
> + ToUUID("3ecbc8b6-1d0e-4fb3-8107-e627f805c6cd"), \
> + 8, \
> + Package() {0x8, 0, \_SB.S00.SL11.CL28.F008, 0}, \
> + Package() {0x9, 0, \_SB.S00.SL11.CL29.F009, 0}, \
> + Package() {0xa, 0, \_SB.S00.SL11.CL2A.F010, 0}, \
> + Package() {0xb, 0, \_SB.S00.SL11.CL2B.F011, 0}, \
> + Package() {0xc, 0, \_SB.S00.SL11.CL2C.F012, 0}, \
> + Package() {0xd, 0, \_SB.S00.SL11.CL2D.F013, 0}, \
> + Package() {0xe, 0, \_SB.S00.SL11.CL2E.F014, 0}, \
> + Package() {0xf, 0, \_SB.S00.SL11.CL2F.F015, 0}, \
> + } \
> + } \
> + }) \
> + }
On 2022/11/10 0:57, Jonathan Cameron wrote:
> On Wed, 9 Nov 2022 21:50:08 +0800
> Junhao He <[email protected]> wrote:
>
>> From: Qi Liu <[email protected]>
>>
>> This patch bring in documentation for UltraSoc SMB drivers.
>> It simply describes the device, sysfs interface and the
>> firmware bindings.
>>
>> Signed-off-by: Qi Liu <[email protected]>
>> Signed-off-by: Junhao He <[email protected]>
> LTGM
>
> Reviewed-by: Jonathan Cameron <[email protected]>
>
> Thanks,
>
> Jonathan
Hi Jonathan,
Thanks for your review!
Best regards,
Junhao.
>> ---
>> .../sysfs-bus-coresight-devices-ultra_smb | 31 +++++++
>> .../trace/coresight/ultrasoc-smb.rst | 80 +++++++++++++++++++
>> 2 files changed, 111 insertions(+)
>> create mode 100644 Documentation/ABI/testing/sysfs-bus-coresight-devices-ultra_smb
>> create mode 100644 Documentation/trace/coresight/ultrasoc-smb.rst
>>
>> diff --git a/Documentation/ABI/testing/sysfs-bus-coresight-devices-ultra_smb b/Documentation/ABI/testing/sysfs-bus-coresight-devices-ultra_smb
>> new file mode 100644
>> index 000000000000..deaefd508105
>> --- /dev/null
>> +++ b/Documentation/ABI/testing/sysfs-bus-coresight-devices-ultra_smb
>> @@ -0,0 +1,31 @@
>> +What: /sys/bus/coresight/devices/ultra_smb<N>/enable_sink
>> +Date: November 2022
>> +KernelVersion: 6.2
>> +Contact: Junhao He <[email protected]>
>> +Description: (RW) Add/remove a SMB device from a trace path. There can be
>> + multiple sources for a single SMB device.
>> +
>> +What: /sys/bus/coresight/devices/ultra_smb<N>/mgmt/buf_size
>> +Date: November 2022
>> +KernelVersion: 6.2
>> +Contact: Junhao He <[email protected]>
>> +Description: (Read) Shows the buffer size of each UltraSoc SMB device.
>> +
>> +What: /sys/bus/coresight/devices/ultra_smb<N>/mgmt/buf_status
>> +Date: November 2022
>> +KernelVersion: 6.2
>> +Contact: Junhao He <[email protected]>
>> +Description: (Read) Shows the value held by UltraSoc SMB status register.
>> + BIT(0) is zero means buffer is empty.
>> +
>> +What: /sys/bus/coresight/devices/ultra_smb<N>/mgmt/read_pos
>> +Date: November 2022
>> +KernelVersion: 6.2
>> +Contact: Junhao He <[email protected]>
>> +Description: (Read) Shows the value held by UltraSoc SMB Read Pointer register.
>> +
>> +What: /sys/bus/coresight/devices/ultra_smb<N>/mgmt/write_pos
>> +Date: November 2022
>> +KernelVersion: 6.2
>> +Contact: Junhao He <[email protected]>
>> +Description: (Read) Shows the value held by UltraSoc SMB Write Pointer register.
>> diff --git a/Documentation/trace/coresight/ultrasoc-smb.rst b/Documentation/trace/coresight/ultrasoc-smb.rst
>> new file mode 100644
>> index 000000000000..6d28ef0f6c88
>> --- /dev/null
>> +++ b/Documentation/trace/coresight/ultrasoc-smb.rst
>> @@ -0,0 +1,80 @@
>> +.. SPDX-License-Identifier: GPL-2.0
>> +
>> +======================================
>> +UltraSoc - HW Assisted Tracing on SoC
>> +======================================
>> + :Author: Qi Liu <[email protected]>
>> + :Date: March 2022
>> +
>> +Introduction
>> +------------
>> +
>> +UltraSoc SMB is a per SCCL(Super CPU Cluster) hardware, and it provides a
>> +way to buffer and store CPU trace messages in a region of shared system
>> +memory. SMB is plugged as a coresight sink device and the corresponding
>> +trace generators (ETM) are plugged in as source devices.
>> +
>> +Sysfs files and directories
>> +---------------------------
>> +
>> +The SMB devices appear on the existing coresight bus alongside the other
>> +coresight devices::
>> +
>> + $# ls /sys/bus/coresight/devices/
>> + ultra_smb0 ultra_smb1 ultra_smb2 ultra_smb3
>> +
>> +The ``ultra_smb<N>`` named SMB associated with SCCL.::
>> +
>> + $# ls /sys/bus/coresight/devices/ultra_smb0
>> + enable_sink mgmt
>> + $# ls /sys/bus/coresight/devices/ultra_smb0/mgmt
>> + buf_size buf_status read_pos write_pos
>> +
>> +*Key file items are:-*
>> + * ``read_pos``: Shows the value held by UltraSoc SMB Read Pointer register.
>> + * ``write_pos``: Shows the value held by UltraSoc SMB Write Pointer register.
>> + * ``buf_status``: Shows the value held by UltraSoc SMB status register.
>> + BIT(0) is zero means buffer is empty.
>> + * ``buf_size``: Shows the buffer size of each UltraSoc SMB device.
>> +
>> +Firmware Bindings
>> +---------------------------
>> +
>> +SMB device is only supported with ACPI, and ACPI binding of SMB device
>> +describes SMB device indentifier, resource information and graph structure.
>> +
>> +SMB is identified by ACPI HID "HISI03A1", resource of device is declared using
>> +the _CRS method. Each SMB must present two base address, the first one is the
>> +configuration base address of SMB device, the second one is the base address of
>> +shared system memory.
>> +
>> +examples::
>> +
>> + Device(USMB) { \
>> + Name(_HID, "HISI03A1") \
>> + Name(_CRS, ResourceTemplate() { \
>> + MEM_RESRC(0x95100000, 0x951FFFFF, 0x100000) \
>> + MEM_RESRC(0x50000000, 0x53FFFFFF, 0x4000000) \
>> + }) \
>> + Name(_DSD, Package() { \
>> + ToUUID("ab02a46b-74c7-45a2-bd68-f7d344ef2153"), \
>> + /* Use CoreSight Graph ACPI bindings to describe connections topology */
>> + Package() { \
>> + 0, \
>> + 1, \
>> + Package() { \
>> + 1, \
>> + ToUUID("3ecbc8b6-1d0e-4fb3-8107-e627f805c6cd"), \
>> + 8, \
>> + Package() {0x8, 0, \_SB.S00.SL11.CL28.F008, 0}, \
>> + Package() {0x9, 0, \_SB.S00.SL11.CL29.F009, 0}, \
>> + Package() {0xa, 0, \_SB.S00.SL11.CL2A.F010, 0}, \
>> + Package() {0xb, 0, \_SB.S00.SL11.CL2B.F011, 0}, \
>> + Package() {0xc, 0, \_SB.S00.SL11.CL2C.F012, 0}, \
>> + Package() {0xd, 0, \_SB.S00.SL11.CL2D.F013, 0}, \
>> + Package() {0xe, 0, \_SB.S00.SL11.CL2E.F014, 0}, \
>> + Package() {0xf, 0, \_SB.S00.SL11.CL2F.F015, 0}, \
>> + } \
>> + } \
>> + }) \
>> + }
> .
>
On 2022/11/9 21:50, Junhao He wrote:
> From: Qi Liu <[email protected]>
>
> This patch bring in documentation for UltraSoc SMB drivers.
> It simply describes the device, sysfs interface and the
> firmware bindings.
>
> Signed-off-by: Qi Liu <[email protected]>
> Signed-off-by: Junhao He <[email protected]>
> ---
> .../sysfs-bus-coresight-devices-ultra_smb | 31 +++++++
> .../trace/coresight/ultrasoc-smb.rst | 80 +++++++++++++++++++
> 2 files changed, 111 insertions(+)
> create mode 100644 Documentation/ABI/testing/sysfs-bus-coresight-devices-ultra_smb
> create mode 100644 Documentation/trace/coresight/ultrasoc-smb.rst
>
> diff --git a/Documentation/ABI/testing/sysfs-bus-coresight-devices-ultra_smb b/Documentation/ABI/testing/sysfs-bus-coresight-devices-ultra_smb
> new file mode 100644
> index 000000000000..deaefd508105
> --- /dev/null
> +++ b/Documentation/ABI/testing/sysfs-bus-coresight-devices-ultra_smb
> @@ -0,0 +1,31 @@
> +What: /sys/bus/coresight/devices/ultra_smb<N>/enable_sink
> +Date: November 2022
> +KernelVersion: 6.2
> +Contact: Junhao He <[email protected]>
> +Description: (RW) Add/remove a SMB device from a trace path. There can be
> + multiple sources for a single SMB device.
> +
> +What: /sys/bus/coresight/devices/ultra_smb<N>/mgmt/buf_size
> +Date: November 2022
> +KernelVersion: 6.2
> +Contact: Junhao He <[email protected]>
> +Description: (Read) Shows the buffer size of each UltraSoc SMB device.
> +
> +What: /sys/bus/coresight/devices/ultra_smb<N>/mgmt/buf_status
> +Date: November 2022
> +KernelVersion: 6.2
> +Contact: Junhao He <[email protected]>
> +Description: (Read) Shows the value held by UltraSoc SMB status register.
> + BIT(0) is zero means buffer is empty.
> +
> +What: /sys/bus/coresight/devices/ultra_smb<N>/mgmt/read_pos
> +Date: November 2022
> +KernelVersion: 6.2
> +Contact: Junhao He <[email protected]>
> +Description: (Read) Shows the value held by UltraSoc SMB Read Pointer register.
> +
> +What: /sys/bus/coresight/devices/ultra_smb<N>/mgmt/write_pos
> +Date: November 2022
> +KernelVersion: 6.2
> +Contact: Junhao He <[email protected]>
> +Description: (Read) Shows the value held by UltraSoc SMB Write Pointer register.
> diff --git a/Documentation/trace/coresight/ultrasoc-smb.rst b/Documentation/trace/coresight/ultrasoc-smb.rst
> new file mode 100644
> index 000000000000..6d28ef0f6c88
> --- /dev/null
> +++ b/Documentation/trace/coresight/ultrasoc-smb.rst
> @@ -0,0 +1,80 @@
> +.. SPDX-License-Identifier: GPL-2.0
> +
> +======================================
> +UltraSoc - HW Assisted Tracing on SoC
> +======================================
> + :Author: Qi Liu <[email protected]>
> + :Date: March 2022
> +
> +Introduction
> +------------
> +
> +UltraSoc SMB is a per SCCL(Super CPU Cluster) hardware, and it provides a
> +way to buffer and store CPU trace messages in a region of shared system
> +memory. SMB is plugged as a coresight sink device and the corresponding
> +trace generators (ETM) are plugged in as source devices.
> +
> +Sysfs files and directories
> +---------------------------
> +
> +The SMB devices appear on the existing coresight bus alongside the other
> +coresight devices::
> +
> + $# ls /sys/bus/coresight/devices/
> + ultra_smb0 ultra_smb1 ultra_smb2 ultra_smb3
> +
> +The ``ultra_smb<N>`` named SMB associated with SCCL.::
> +
> + $# ls /sys/bus/coresight/devices/ultra_smb0
> + enable_sink mgmt
> + $# ls /sys/bus/coresight/devices/ultra_smb0/mgmt
> + buf_size buf_status read_pos write_pos
> +
> +*Key file items are:-*
> + * ``read_pos``: Shows the value held by UltraSoc SMB Read Pointer register.
> + * ``write_pos``: Shows the value held by UltraSoc SMB Write Pointer register.
> + * ``buf_status``: Shows the value held by UltraSoc SMB status register.
> + BIT(0) is zero means buffer is empty.
> + * ``buf_size``: Shows the buffer size of each UltraSoc SMB device.
> +
> +Firmware Bindings
> +---------------------------
> +
> +SMB device is only supported with ACPI, and ACPI binding of SMB device
> +describes SMB device indentifier, resource information and graph structure.
> +
> +SMB is identified by ACPI HID "HISI03A1", resource of device is declared using
> +the _CRS method. Each SMB must present two base address, the first one is the
> +configuration base address of SMB device, the second one is the base address of
> +shared system memory.
> +
> +examples::
> +
> + Device(USMB) { \
> + Name(_HID, "HISI03A1") \
> + Name(_CRS, ResourceTemplate() { \
> + MEM_RESRC(0x95100000, 0x951FFFFF, 0x100000) \
> + MEM_RESRC(0x50000000, 0x53FFFFFF, 0x4000000) \
I cannot find MEM_RESRC in ACPI Spec 6.4, any references? If it's a self defined macro just expand it here.
btw, you need to cc [email protected].
Thanks.
> + }) \
> + Name(_DSD, Package() { \
> + ToUUID("ab02a46b-74c7-45a2-bd68-f7d344ef2153"), \
> + /* Use CoreSight Graph ACPI bindings to describe connections topology */
> + Package() { \
> + 0, \
> + 1, \
> + Package() { \
> + 1, \
> + ToUUID("3ecbc8b6-1d0e-4fb3-8107-e627f805c6cd"), \
> + 8, \
> + Package() {0x8, 0, \_SB.S00.SL11.CL28.F008, 0}, \
> + Package() {0x9, 0, \_SB.S00.SL11.CL29.F009, 0}, \
> + Package() {0xa, 0, \_SB.S00.SL11.CL2A.F010, 0}, \
> + Package() {0xb, 0, \_SB.S00.SL11.CL2B.F011, 0}, \
> + Package() {0xc, 0, \_SB.S00.SL11.CL2C.F012, 0}, \
> + Package() {0xd, 0, \_SB.S00.SL11.CL2D.F013, 0}, \
> + Package() {0xe, 0, \_SB.S00.SL11.CL2E.F014, 0}, \
> + Package() {0xf, 0, \_SB.S00.SL11.CL2F.F015, 0}, \
> + } \
> + } \
> + }) \
> + }
>
Hi Yicong.
On 2022/11/10 20:08, Yicong Yang wrote:
> On 2022/11/9 21:50, Junhao He wrote:
>> From: Qi Liu <[email protected]>
>>
>> This patch bring in documentation for UltraSoc SMB drivers.
>> It simply describes the device, sysfs interface and the
>> firmware bindings.
>>
>> Signed-off-by: Qi Liu <[email protected]>
>> Signed-off-by: Junhao He <[email protected]>
>> ---
>> .../sysfs-bus-coresight-devices-ultra_smb | 31 +++++++
>> .../trace/coresight/ultrasoc-smb.rst | 80 +++++++++++++++++++
>> 2 files changed, 111 insertions(+)
>> create mode 100644 Documentation/ABI/testing/sysfs-bus-coresight-devices-ultra_smb
>> create mode 100644 Documentation/trace/coresight/ultrasoc-smb.rst
>>
>> diff --git a/Documentation/ABI/testing/sysfs-bus-coresight-devices-ultra_smb b/Documentation/ABI/testing/sysfs-bus-coresight-devices-ultra_smb
>> new file mode 100644
>> index 000000000000..deaefd508105
>> --- /dev/null
>> +++ b/Documentation/ABI/testing/sysfs-bus-coresight-devices-ultra_smb
>> @@ -0,0 +1,31 @@
>> +What: /sys/bus/coresight/devices/ultra_smb<N>/enable_sink
>> +Date: November 2022
>> +KernelVersion: 6.2
>> +Contact: Junhao He <[email protected]>
>> +Description: (RW) Add/remove a SMB device from a trace path. There can be
>> + multiple sources for a single SMB device.
>> +
>> +What: /sys/bus/coresight/devices/ultra_smb<N>/mgmt/buf_size
>> +Date: November 2022
>> +KernelVersion: 6.2
>> +Contact: Junhao He <[email protected]>
>> +Description: (Read) Shows the buffer size of each UltraSoc SMB device.
>> +
>> +What: /sys/bus/coresight/devices/ultra_smb<N>/mgmt/buf_status
>> +Date: November 2022
>> +KernelVersion: 6.2
>> +Contact: Junhao He <[email protected]>
>> +Description: (Read) Shows the value held by UltraSoc SMB status register.
>> + BIT(0) is zero means buffer is empty.
>> +
>> +What: /sys/bus/coresight/devices/ultra_smb<N>/mgmt/read_pos
>> +Date: November 2022
>> +KernelVersion: 6.2
>> +Contact: Junhao He <[email protected]>
>> +Description: (Read) Shows the value held by UltraSoc SMB Read Pointer register.
>> +
>> +What: /sys/bus/coresight/devices/ultra_smb<N>/mgmt/write_pos
>> +Date: November 2022
>> +KernelVersion: 6.2
>> +Contact: Junhao He <[email protected]>
>> +Description: (Read) Shows the value held by UltraSoc SMB Write Pointer register.
>> diff --git a/Documentation/trace/coresight/ultrasoc-smb.rst b/Documentation/trace/coresight/ultrasoc-smb.rst
>> new file mode 100644
>> index 000000000000..6d28ef0f6c88
>> --- /dev/null
>> +++ b/Documentation/trace/coresight/ultrasoc-smb.rst
>> @@ -0,0 +1,80 @@
>> +.. SPDX-License-Identifier: GPL-2.0
>> +
>> +======================================
>> +UltraSoc - HW Assisted Tracing on SoC
>> +======================================
>> + :Author: Qi Liu <[email protected]>
>> + :Date: March 2022
>> +
>> +Introduction
>> +------------
>> +
>> +UltraSoc SMB is a per SCCL(Super CPU Cluster) hardware, and it provides a
>> +way to buffer and store CPU trace messages in a region of shared system
>> +memory. SMB is plugged as a coresight sink device and the corresponding
>> +trace generators (ETM) are plugged in as source devices.
>> +
>> +Sysfs files and directories
>> +---------------------------
>> +
>> +The SMB devices appear on the existing coresight bus alongside the other
>> +coresight devices::
>> +
>> + $# ls /sys/bus/coresight/devices/
>> + ultra_smb0 ultra_smb1 ultra_smb2 ultra_smb3
>> +
>> +The ``ultra_smb<N>`` named SMB associated with SCCL.::
>> +
>> + $# ls /sys/bus/coresight/devices/ultra_smb0
>> + enable_sink mgmt
>> + $# ls /sys/bus/coresight/devices/ultra_smb0/mgmt
>> + buf_size buf_status read_pos write_pos
>> +
>> +*Key file items are:-*
>> + * ``read_pos``: Shows the value held by UltraSoc SMB Read Pointer register.
>> + * ``write_pos``: Shows the value held by UltraSoc SMB Write Pointer register.
>> + * ``buf_status``: Shows the value held by UltraSoc SMB status register.
>> + BIT(0) is zero means buffer is empty.
>> + * ``buf_size``: Shows the buffer size of each UltraSoc SMB device.
>> +
>> +Firmware Bindings
>> +---------------------------
>> +
>> +SMB device is only supported with ACPI, and ACPI binding of SMB device
>> +describes SMB device indentifier, resource information and graph structure.
>> +
>> +SMB is identified by ACPI HID "HISI03A1", resource of device is declared using
>> +the _CRS method. Each SMB must present two base address, the first one is the
>> +configuration base address of SMB device, the second one is the base address of
>> +shared system memory.
>> +
>> +examples::
>> +
>> + Device(USMB) { \
>> + Name(_HID, "HISI03A1") \
>> + Name(_CRS, ResourceTemplate() { \
>> + MEM_RESRC(0x95100000, 0x951FFFFF, 0x100000) \
>> + MEM_RESRC(0x50000000, 0x53FFFFFF, 0x4000000) \
> I cannot find MEM_RESRC in ACPI Spec 6.4, any references? If it's a self defined macro just expand it here.
>
> btw, you need to cc [email protected].
>
> Thanks.
"MEM_RESERVE" is a macro. will update the doc and add cc.
Thanks for the comments!
>> + }) \
>> + Name(_DSD, Package() { \
>> + ToUUID("ab02a46b-74c7-45a2-bd68-f7d344ef2153"), \
>> + /* Use CoreSight Graph ACPI bindings to describe connections topology */
>> + Package() { \
>> + 0, \
>> + 1, \
>> + Package() { \
>> + 1, \
>> + ToUUID("3ecbc8b6-1d0e-4fb3-8107-e627f805c6cd"), \
>> + 8, \
>> + Package() {0x8, 0, \_SB.S00.SL11.CL28.F008, 0}, \
>> + Package() {0x9, 0, \_SB.S00.SL11.CL29.F009, 0}, \
>> + Package() {0xa, 0, \_SB.S00.SL11.CL2A.F010, 0}, \
>> + Package() {0xb, 0, \_SB.S00.SL11.CL2B.F011, 0}, \
>> + Package() {0xc, 0, \_SB.S00.SL11.CL2C.F012, 0}, \
>> + Package() {0xd, 0, \_SB.S00.SL11.CL2D.F013, 0}, \
>> + Package() {0xe, 0, \_SB.S00.SL11.CL2E.F014, 0}, \
>> + Package() {0xf, 0, \_SB.S00.SL11.CL2F.F015, 0}, \
>> + } \
>> + } \
>> + }) \
>> + }
>>
> .
>
Best regards,
Junhao.