This is an enhancement which allows to specify the default driver
parameters among the module parameters.
Adding default variables to the speakup_ltlk module
allows to easily set that at boot, rather than
setting the sys variables after boot.
More details can be found here:
https://github.com/linux-speakup/speakup/issues/7
Signed-off-by: Osama Muhammad <[email protected]>
Reviewed-by: Samuel Thibault <[email protected]>
---
drivers/accessibility/speakup/speakup_ltlk.c | 53 ++++++++++++++++----
1 file changed, 42 insertions(+), 11 deletions(-)
diff --git a/drivers/accessibility/speakup/speakup_ltlk.c b/drivers/accessibility/speakup/speakup_ltlk.c
index f885cfaa27c8..1e279ae143bf 100644
--- a/drivers/accessibility/speakup/speakup_ltlk.c
+++ b/drivers/accessibility/speakup/speakup_ltlk.c
@@ -18,17 +18,28 @@
static int synth_probe(struct spk_synth *synth);
-static struct var_t vars[] = {
- { CAPS_START, .u.s = {"\x01+35p" } },
- { CAPS_STOP, .u.s = {"\x01-35p" } },
- { RATE, .u.n = {"\x01%ds", 8, 0, 9, 0, 0, NULL } },
- { PITCH, .u.n = {"\x01%dp", 50, 0, 99, 0, 0, NULL } },
- { VOL, .u.n = {"\x01%dv", 5, 0, 9, 0, 0, NULL } },
- { TONE, .u.n = {"\x01%dx", 1, 0, 2, 0, 0, NULL } },
- { PUNCT, .u.n = {"\x01%db", 7, 0, 15, 0, 0, NULL } },
- { VOICE, .u.n = {"\x01%do", 0, 0, 7, 0, 0, NULL } },
- { FREQUENCY, .u.n = {"\x01%df", 5, 0, 9, 0, 0, NULL } },
- { DIRECT, .u.n = {NULL, 0, 0, 1, 0, 0, NULL } },
+
+enum default_vars_id {
+ CAPS_START_ID = 0, CAPS_STOP_ID,
+ RATE_ID, PITCH_ID,
+ VOL_ID, TONE_ID, PUNCT_ID,
+ VOICE_ID, FREQUENCY_ID,
+ DIRECT_ID, V_LAST_VAR_ID,
+ NB_ID
+};
+
+
+static struct var_t vars[NB_ID] = {
+ [CAPS_START_ID] = { CAPS_START, .u.s = {"\x01+35p" } },
+ [CAPS_STOP_ID] = { CAPS_STOP, .u.s = {"\x01-35p" } },
+ [RATE_ID] = { RATE, .u.n = {"\x01%ds", 8, 0, 9, 0, 0, NULL } },
+ [PITCH_ID] = { PITCH, .u.n = {"\x01%dp", 50, 0, 99, 0, 0, NULL } },
+ [VOL_ID] = { VOL, .u.n = {"\x01%dv", 5, 0, 9, 0, 0, NULL } },
+ [TONE_ID] = { TONE, .u.n = {"\x01%dx", 1, 0, 2, 0, 0, NULL } },
+ [PUNCT_ID] = { PUNCT, .u.n = {"\x01%db", 7, 0, 15, 0, 0, NULL } },
+ [VOICE_ID] = { VOICE, .u.n = {"\x01%do", 0, 0, 7, 0, 0, NULL } },
+ [FREQUENCY_ID] = { FREQUENCY, .u.n = {"\x01%df", 5, 0, 9, 0, 0, NULL } },
+ [DIRECT_ID] = { DIRECT, .u.n = {NULL, 0, 0, 1, 0, 0, NULL } },
V_LAST_VAR
};
@@ -160,10 +171,30 @@ static int synth_probe(struct spk_synth *synth)
module_param_named(ser, synth_ltlk.ser, int, 0444);
module_param_named(dev, synth_ltlk.dev_name, charp, 0444);
module_param_named(start, synth_ltlk.startup, short, 0444);
+module_param_named(rate, vars[RATE_ID].u.n.default_val, int, 0444);
+module_param_named(pitch, vars[PITCH_ID].u.n.default_val, int, 0444);
+module_param_named(vol, vars[VOL_ID].u.n.default_val, int, 0444);
+module_param_named(tone, vars[TONE_ID].u.n.default_val, int, 0444);
+module_param_named(punct, vars[PUNCT_ID].u.n.default_val, int, 0444);
+module_param_named(voice, vars[VOICE_ID].u.n.default_val, int, 0444);
+module_param_named(frequency, vars[FREQUENCY_ID].u.n.default_val, int, 0444);
+module_param_named(direct, vars[DIRECT_ID].u.n.default_val, int, 0444);
+
+
+
MODULE_PARM_DESC(ser, "Set the serial port for the synthesizer (0-based).");
MODULE_PARM_DESC(dev, "Set the device e.g. ttyUSB0, for the synthesizer.");
MODULE_PARM_DESC(start, "Start the synthesizer once it is loaded.");
+MODULE_PARM_DESC(rate, "Set the rate variable on load.");
+MODULE_PARM_DESC(pitch, "Set the pitch variable on load.");
+MODULE_PARM_DESC(vol, "Set the vol variable on load.");
+MODULE_PARM_DESC(tone, "Set the tone variable on load.");
+MODULE_PARM_DESC(punct, "Set the punct variable on load.");
+MODULE_PARM_DESC(voice, "Set the voice variable on load.");
+MODULE_PARM_DESC(frequency, "Set the frequency variable on load.");
+MODULE_PARM_DESC(direct, "Set the direct variable on load.");
+
module_spk_synth(synth_ltlk);
--
2.25.1