From: Fabien Parent <[email protected]>
This adds minimal support for the MediaTek 8365 SOC and the EVK reference
board, allowing the board to boot to initramfs with serial port I/O.
GPIO keys are supported, MMC is partially supported (needs the clocks
driver for full support).
Signed-off-by: Fabien Parent <[email protected]>
[[email protected]: Removed parts depending on drivers that aren't upstream yet, cleanups]
Signed-off-by: Bernhard Rosenkränzer <[email protected]>
---
Compared to the previous version of the patch submitted by Fabien
Parent, this removes dependencies on drivers/patches that are not yet in
mainline (obviously this comes with some reduced functionality for now;
this will be added back as drivers are accepted), and addresses some
feedback from reviewers.
arch/arm64/boot/dts/mediatek/Makefile | 1 +
arch/arm64/boot/dts/mediatek/mt8365-evk.dts | 344 +++++++++++
arch/arm64/boot/dts/mediatek/mt8365.dtsi | 602 ++++++++++++++++++++
3 files changed, 947 insertions(+)
create mode 100644 arch/arm64/boot/dts/mediatek/mt8365-evk.dts
create mode 100644 arch/arm64/boot/dts/mediatek/mt8365.dtsi
diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
index 0ec90cb3ef289..e668fd50a3326 100644
--- a/arch/arm64/boot/dts/mediatek/Makefile
+++ b/arch/arm64/boot/dts/mediatek/Makefile
@@ -46,4 +46,5 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-cherry-tomato-r2.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-cherry-tomato-r3.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-demo.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-evb.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8365-evk.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8516-pumpkin.dtb
diff --git a/arch/arm64/boot/dts/mediatek/mt8365-evk.dts b/arch/arm64/boot/dts/mediatek/mt8365-evk.dts
new file mode 100644
index 0000000000000..a24e478fff51f
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8365-evk.dts
@@ -0,0 +1,344 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2021-2022 BayLibre, SAS.
+ * Authors:
+ * Fabien Parent <[email protected]>
+ * Bernhard Rosenkränzer <[email protected]>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/mt8365-pinfunc.h>
+#include "mt8365.dtsi"
+
+/ {
+ model = "MediaTek MT8365 Open Platform EVK";
+ compatible = "mediatek,mt8365-evk", "mediatek,mt8365";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:921600n8";
+ };
+
+ firmware {
+ optee {
+ compatible = "linaro,optee-tz";
+ method = "smc";
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ input-name = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio_keys>;
+
+ key-volume-up {
+ gpios = <&pio 24 GPIO_ACTIVE_LOW>;
+ label = "volume_up";
+ linux,code = <KEY_VOLUMEUP>;
+ wakeup-source;
+ debounce-interval = <15>;
+ };
+ };
+
+ memory@40000000 {
+ device_type = "memory";
+ reg = <0 0x40000000 0 0xc0000000>;
+ };
+
+ usb_otg_vbus: regulator-2 {
+ compatible = "regulator-fixed";
+ regulator-name = "otg_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&pio 16 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ /* 12 MiB reserved for OP-TEE (BL32)
+ * +-----------------------+ 0x43e0_0000
+ * | SHMEM 2MiB |
+ * +-----------------------+ 0x43c0_0000
+ * | | TA_RAM 8MiB |
+ * + TZDRAM +--------------+ 0x4340_0000
+ * | | TEE_RAM 2MiB |
+ * +-----------------------+ 0x4320_0000
+ */
+ optee_reserved: optee@43200000 {
+ no-map;
+ reg = <0 0x43200000 0 0x00c00000>;
+ };
+ };
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+ clock-frequency = <100000>;
+ status = "okay";
+};
+
+&pio {
+ dpi_func_pins: dpi-func-pins {
+ pins {
+ pinmux = <MT8365_PIN_0_GPIO0__FUNC_DPI_D0>,
+ <MT8365_PIN_1_GPIO1__FUNC_DPI_D1>,
+ <MT8365_PIN_2_GPIO2__FUNC_DPI_D2>,
+ <MT8365_PIN_3_GPIO3__FUNC_DPI_D3>,
+ <MT8365_PIN_4_GPIO4__FUNC_DPI_D4>,
+ <MT8365_PIN_5_GPIO5__FUNC_DPI_D5>,
+ <MT8365_PIN_6_GPIO6__FUNC_DPI_D6>,
+ <MT8365_PIN_7_GPIO7__FUNC_DPI_D7>,
+ <MT8365_PIN_8_GPIO8__FUNC_DPI_D8>,
+ <MT8365_PIN_9_GPIO9__FUNC_DPI_D9>,
+ <MT8365_PIN_10_GPIO10__FUNC_DPI_D10>,
+ <MT8365_PIN_11_GPIO11__FUNC_DPI_D11>,
+ <MT8365_PIN_12_GPIO12__FUNC_DPI_DE>,
+ <MT8365_PIN_13_GPIO13__FUNC_DPI_VSYNC>,
+ <MT8365_PIN_14_GPIO14__FUNC_DPI_CK>,
+ <MT8365_PIN_15_GPIO15__FUNC_DPI_HSYNC>;
+ drive-strength = <MTK_DRIVE_4mA>;
+ };
+ };
+
+ dpi_idle_pins: dpi-idle-pins {
+ pins {
+ pinmux = <MT8365_PIN_0_GPIO0__FUNC_GPIO0>,
+ <MT8365_PIN_1_GPIO1__FUNC_GPIO1>,
+ <MT8365_PIN_2_GPIO2__FUNC_GPIO2>,
+ <MT8365_PIN_3_GPIO3__FUNC_GPIO3>,
+ <MT8365_PIN_4_GPIO4__FUNC_GPIO4>,
+ <MT8365_PIN_5_GPIO5__FUNC_GPIO5>,
+ <MT8365_PIN_6_GPIO6__FUNC_GPIO6>,
+ <MT8365_PIN_7_GPIO7__FUNC_GPIO7>,
+ <MT8365_PIN_8_GPIO8__FUNC_GPIO8>,
+ <MT8365_PIN_9_GPIO9__FUNC_GPIO9>,
+ <MT8365_PIN_10_GPIO10__FUNC_GPIO10>,
+ <MT8365_PIN_11_GPIO11__FUNC_GPIO11>,
+ <MT8365_PIN_12_GPIO12__FUNC_GPIO12>,
+ <MT8365_PIN_13_GPIO13__FUNC_GPIO13>,
+ <MT8365_PIN_14_GPIO14__FUNC_GPIO14>,
+ <MT8365_PIN_15_GPIO15__FUNC_GPIO15>;
+ };
+ };
+
+ gpio_keys: gpio-keys-pins {
+ pins {
+ pinmux = <MT8365_PIN_24_KPCOL0__FUNC_KPCOL0>;
+ bias-pull-up;
+ input-enable;
+ };
+ };
+
+ i2c1_pins: i2c1-pins {
+ pins {
+ pinmux = <MT8365_PIN_59_SDA1__FUNC_SDA1_0>,
+ <MT8365_PIN_60_SCL1__FUNC_SCL1_0>;
+ mediatek,pull-up-adv = <3>;
+ mediatek,drive-strength-adv = <00>;
+ bias-pull-up;
+ };
+ };
+
+ ite_pins: ite-pins {
+ pins-rst-ite {
+ pinmux = <MT8365_PIN_69_CMDAT1__FUNC_GPIO69>;
+ output-high;
+ };
+
+ pins-irq-ite {
+ pinmux = <MT8365_PIN_68_CMDAT0__FUNC_GPIO68>;
+ input-enable;
+ bias-pull-up;
+ };
+
+ pins-pwr {
+ pinmux = <MT8365_PIN_70_CMDAT2__FUNC_GPIO70>,
+ <MT8365_PIN_71_CMDAT3__FUNC_GPIO71>;
+ output-high;
+ };
+ };
+
+ mmc0_pins_default: mmc0-default-pins {
+ pins-clk {
+ pinmux = <MT8365_PIN_99_MSDC0_CLK__FUNC_MSDC0_CLK>;
+ bias-pull-down;
+ };
+
+ pins-cmd-dat {
+ pinmux = <MT8365_PIN_103_MSDC0_DAT0__FUNC_MSDC0_DAT0>,
+ <MT8365_PIN_102_MSDC0_DAT1__FUNC_MSDC0_DAT1>,
+ <MT8365_PIN_101_MSDC0_DAT2__FUNC_MSDC0_DAT2>,
+ <MT8365_PIN_100_MSDC0_DAT3__FUNC_MSDC0_DAT3>,
+ <MT8365_PIN_96_MSDC0_DAT4__FUNC_MSDC0_DAT4>,
+ <MT8365_PIN_95_MSDC0_DAT5__FUNC_MSDC0_DAT5>,
+ <MT8365_PIN_94_MSDC0_DAT6__FUNC_MSDC0_DAT6>,
+ <MT8365_PIN_93_MSDC0_DAT7__FUNC_MSDC0_DAT7>,
+ <MT8365_PIN_98_MSDC0_CMD__FUNC_MSDC0_CMD>;
+ input-enable;
+ bias-pull-up;
+ };
+
+ pins-rst {
+ pinmux = <MT8365_PIN_97_MSDC0_RSTB__FUNC_MSDC0_RSTB>;
+ bias-pull-up;
+ };
+ };
+
+ mmc0_pins_uhs: mmc0-uhs-pins {
+ pins-clk {
+ pinmux = <MT8365_PIN_99_MSDC0_CLK__FUNC_MSDC0_CLK>;
+ drive-strength = <MTK_DRIVE_10mA>;
+ bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+ };
+
+ pins-cmd-dat {
+ pinmux = <MT8365_PIN_103_MSDC0_DAT0__FUNC_MSDC0_DAT0>,
+ <MT8365_PIN_102_MSDC0_DAT1__FUNC_MSDC0_DAT1>,
+ <MT8365_PIN_101_MSDC0_DAT2__FUNC_MSDC0_DAT2>,
+ <MT8365_PIN_100_MSDC0_DAT3__FUNC_MSDC0_DAT3>,
+ <MT8365_PIN_96_MSDC0_DAT4__FUNC_MSDC0_DAT4>,
+ <MT8365_PIN_95_MSDC0_DAT5__FUNC_MSDC0_DAT5>,
+ <MT8365_PIN_94_MSDC0_DAT6__FUNC_MSDC0_DAT6>,
+ <MT8365_PIN_93_MSDC0_DAT7__FUNC_MSDC0_DAT7>,
+ <MT8365_PIN_98_MSDC0_CMD__FUNC_MSDC0_CMD>;
+ input-enable;
+ drive-strength = <MTK_DRIVE_10mA>;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+ };
+
+ pins-ds {
+ pinmux = <MT8365_PIN_104_MSDC0_DSL__FUNC_MSDC0_DSL>;
+ drive-strength = <MTK_DRIVE_10mA>;
+ bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+ };
+
+ pins-rst {
+ pinmux = <MT8365_PIN_97_MSDC0_RSTB__FUNC_MSDC0_RSTB>;
+ drive-strength = <MTK_DRIVE_10mA>;
+ bias-pull-up;
+ };
+ };
+
+ mmc1_pins_default: mmc1-default-pins {
+ pins-cd {
+ pinmux = <MT8365_PIN_76_CMDAT8__FUNC_GPIO76>;
+ bias-pull-up;
+ };
+
+ pins-clk {
+ pinmux = <MT8365_PIN_88_MSDC1_CLK__FUNC_MSDC1_CLK>;
+ bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+ };
+
+ pins-cmd-dat {
+ pinmux = <MT8365_PIN_89_MSDC1_DAT0__FUNC_MSDC1_DAT0>,
+ <MT8365_PIN_90_MSDC1_DAT1__FUNC_MSDC1_DAT1>,
+ <MT8365_PIN_91_MSDC1_DAT2__FUNC_MSDC1_DAT2>,
+ <MT8365_PIN_92_MSDC1_DAT3__FUNC_MSDC1_DAT3>,
+ <MT8365_PIN_87_MSDC1_CMD__FUNC_MSDC1_CMD>;
+ input-enable;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+ };
+ };
+
+ mmc1_pins_uhs: mmc1-uhs-pins {
+ pins-clk {
+ pinmux = <MT8365_PIN_88_MSDC1_CLK__FUNC_MSDC1_CLK>;
+ drive-strength = <MTK_DRIVE_8mA>;
+ bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+ };
+
+ pins-cmd-dat {
+ pinmux = <MT8365_PIN_89_MSDC1_DAT0__FUNC_MSDC1_DAT0>,
+ <MT8365_PIN_90_MSDC1_DAT1__FUNC_MSDC1_DAT1>,
+ <MT8365_PIN_91_MSDC1_DAT2__FUNC_MSDC1_DAT2>,
+ <MT8365_PIN_92_MSDC1_DAT3__FUNC_MSDC1_DAT3>,
+ <MT8365_PIN_87_MSDC1_CMD__FUNC_MSDC1_CMD>;
+ input-enable;
+ drive-strength = <MTK_DRIVE_6mA>;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+ };
+ };
+
+ uart0_pins: uart0-pins {
+ pins {
+ pinmux = <MT8365_PIN_35_URXD0__FUNC_URXD0>,
+ <MT8365_PIN_36_UTXD0__FUNC_UTXD0>;
+ };
+ };
+
+ uart1_pins: uart1-pins {
+ pins {
+ pinmux = <MT8365_PIN_37_URXD1__FUNC_URXD1>,
+ <MT8365_PIN_38_UTXD1__FUNC_UTXD1>;
+ };
+ };
+
+ uart2_pins: uart2-pins {
+ pins {
+ pinmux = <MT8365_PIN_39_URXD2__FUNC_URXD2>,
+ <MT8365_PIN_40_UTXD2__FUNC_UTXD2>;
+ };
+ };
+
+ usb_pins: usb-pins {
+ pins-id {
+ pinmux = <MT8365_PIN_17_GPIO17__FUNC_GPIO17>;
+ input-enable;
+ bias-pull-up;
+ };
+
+ pins-usb0-vbus {
+ pinmux = <MT8365_PIN_16_GPIO16__FUNC_USB_DRVVBUS>;
+ output-high;
+ };
+
+ pin-usb1-vbus {
+ pinmux = <MT8365_PIN_18_GPIO18__FUNC_GPIO18>;
+ output-high;
+ };
+ };
+
+ pwm_pins: pwm-pins {
+ pins {
+ pinmux = <MT8365_PIN_19_DISP_PWM__FUNC_PWM_A>,
+ <MT8365_PIN_116_I2S_BCK__FUNC_PWM_C>;
+ };
+ };
+};
+
+&pwm {
+ pinctrl-0 = <&pwm_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-0 = <&uart0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-0 = <&uart1_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-0 = <&uart2_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8365.dtsi b/arch/arm64/boot/dts/mediatek/mt8365.dtsi
new file mode 100644
index 0000000000000..8b20e3e5f807d
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8365.dtsi
@@ -0,0 +1,602 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * (C) 2018 MediaTek Inc.
+ * Copyright (C) 2022 BayLibre SAS
+ * Fabien Parent <[email protected]>
+ * Bernhard Rosenkränzer <[email protected]>
+ */
+#include <dt-bindings/clock/mediatek,mt8365-clk.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+ compatible = "mediatek,mt8365";
+ interrupt-parent = <&sysirq>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpus: cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu-map {
+ cluster0: cluster0 {
+ core0 {
+ cpu = <&cpu0>;
+ };
+ core1 {
+ cpu = <&cpu1>;
+ };
+ core2 {
+ cpu = <&cpu2>;
+ };
+ core3 {
+ cpu = <&cpu3>;
+ };
+ };
+ };
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x0>;
+ #cooling-cells = <2>;
+ enable-method = "psci";
+ };
+
+ cpu1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x1>;
+ #cooling-cells = <2>;
+ enable-method = "psci";
+ };
+
+ cpu2: cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x2>;
+ #cooling-cells = <2>;
+ enable-method = "psci";
+ };
+
+ cpu3: cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x3>;
+ #cooling-cells = <2>;
+ enable-method = "psci";
+ };
+ };
+
+ clk26m: oscillator {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <26000000>;
+ clock-output-names = "clk26m";
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ /* 128 KiB reserved for ARM Trusted Firmware (BL31) */
+ bl31_secmon_reserved: secmon@43000000 {
+ no-map;
+ reg = <0 0x43000000 0 0x20000>;
+ };
+ };
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ compatible = "simple-bus";
+ ranges;
+
+ gic: interrupt-controller@c000000 {
+ compatible = "arm,gic-v3";
+ #interrupt-cells = <4>;
+ interrupt-parent = <&gic>;
+ interrupt-controller;
+ reg = <0 0x0c000000 0 0x80000>,
+ <0 0x0c080000 0 0x80000>;
+
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>;
+ };
+
+ topckgen: syscon@10000000 {
+ compatible = "mediatek,mt8365-topckgen", "syscon";
+ reg = <0 0x10000000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ infracfg: syscon@10001000 {
+ compatible = "mediatek,mt8365-infracfg", "syscon";
+ reg = <0 0x10001000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ pericfg: syscon@10003000 {
+ compatible = "mediatek,mt8365-pericfg", "syscon";
+ reg = <0 0x10003000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ syscfg_pctl: syscfg-pctl@10005000 {
+ compatible = "mediatek,mt8365-syscfg", "syscon";
+ reg = <0 0x10005000 0 0x1000>;
+ };
+
+ watchdog: watchdog@10007000 {
+ compatible = "mediatek,mt8365-wdt",
+ "mediatek,mt6589-wdt";
+ reg = <0 0x10007000 0 0x100>;
+ #reset-cells = <1>;
+ };
+
+ gpt: apxgpt@10008000 {
+ compatible = "mediatek,mt8365-timer",
+ "mediatek,mt6577-timer";
+ reg = <0 0x10008000 0 0x1000>;
+ interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&topckgen CLK_TOP_SYS_26M_D2>;
+ clock-names = "clk13m";
+ };
+
+ pio: pinctrl@1000b000 {
+ compatible = "mediatek,mt8365-pinctrl";
+ reg = <0 0x1000b000 0 0x1000>;
+ mediatek,pctl-regmap = <&syscfg_pctl>;
+ pins-are-numbered;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ apmixedsys: syscon@1000c000 {
+ compatible = "mediatek,mt8365-apmixedsys", "syscon";
+ reg = <0 0x1000c000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ pwrap: pwrap@1000d000 {
+ compatible = "mediatek,mt8365-pwrap";
+ reg = <0 0x1000d000 0 0x1000>;
+ reg-names = "pwrap";
+ interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&infracfg CLK_IFR_PWRAP_SPI>,
+ <&infracfg CLK_IFR_PMIC_AP>,
+ <&infracfg CLK_IFR_PWRAP_SYS>,
+ <&infracfg CLK_IFR_PWRAP_TMR>;
+ clock-names = "spi", "wrap", "sys", "tmr";
+ };
+
+ keypad: keypad@10010000 {
+ compatible = "mediatek,mt6779-keypad";
+ reg = <0 0x10010000 0 0x1000>;
+ wakeup-source;
+ interrupts = <GIC_SPI 124 IRQ_TYPE_EDGE_FALLING>;
+ clocks = <&clk26m>;
+ clock-names = "kpd";
+ status = "disabled";
+ };
+
+ mcucfg: syscon@10200000 {
+ compatible = "mediatek,mt8365-mcucfg", "syscon";
+ reg = <0 0x10200000 0 0x2000>;
+ #clock-cells = <1>;
+ };
+
+ sysirq: interrupt-controller@10200a80 {
+ compatible = "mediatek,mt8365-sysirq",
+ "mediatek,mt6577-sysirq";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ interrupt-parent = <&gic>;
+ reg = <0 0x10200a80 0 0x20>;
+ };
+
+ infracfg_nao: infracfg-nao@1020e000 {
+ compatible = "syscon";
+ reg = <0 0x1020e000 0 0x1000>;
+ };
+
+ rng: rng@1020f000 {
+ compatible = "mediatek,mt8365-rng",
+ "mediatek,mt7623-rng";
+ reg = <0 0x1020f000 0 0x100>;
+ clocks = <&infracfg CLK_IFR_TRNG>;
+ clock-names = "rng";
+ };
+
+ apdma: dma-controller@11000280 {
+ compatible = "mediatek,mt8365-uart-dma",
+ "mediatek,mt6577-uart-dma";
+ reg = <0 0x11000280 0 0x80>,
+ <0 0x11000300 0 0x80>,
+ <0 0x11000380 0 0x80>,
+ <0 0x11000400 0 0x80>,
+ <0 0x11000580 0 0x80>,
+ <0 0x11000600 0 0x80>;
+ interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 46 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 47 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 48 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>;
+ dma-requests = <6>;
+ clocks = <&infracfg CLK_IFR_AP_DMA>;
+ clock-names = "apdma";
+ #dma-cells = <1>;
+ };
+
+ auxadc: adc@11001000 {
+ compatible = "mediatek,mt8365-auxadc",
+ "mediatek,mt8173-auxadc";
+ reg = <0 0x11001000 0 0x1000>;
+ clocks = <&infracfg CLK_IFR_AUXADC>;
+ clock-names = "main";
+ #io-channel-cells = <1>;
+ };
+
+ uart0: serial@11002000 {
+ compatible = "mediatek,mt8365-uart",
+ "mediatek,mt6577-uart";
+ reg = <0 0x11002000 0 0x1000>;
+ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&clk26m>, <&infracfg CLK_IFR_UART0>;
+ clock-names = "baud", "bus";
+ dmas = <&apdma 0>, <&apdma 1>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ uart1: serial@11003000 {
+ compatible = "mediatek,mt8365-uart",
+ "mediatek,mt6577-uart";
+ reg = <0 0x11003000 0 0x1000>;
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&clk26m>, <&infracfg CLK_IFR_UART1>;
+ clock-names = "baud", "bus";
+ dmas = <&apdma 2>, <&apdma 3>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ uart2: serial@11004000 {
+ compatible = "mediatek,mt8365-uart",
+ "mediatek,mt6577-uart";
+ reg = <0 0x11004000 0 0x1000>;
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&clk26m>, <&infracfg CLK_IFR_UART2>;
+ clock-names = "baud", "bus";
+ dmas = <&apdma 4>, <&apdma 5>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ pwm: pwm@11006000 {
+ compatible = "mediatek,mt8365-pwm";
+ reg = <0 0x11006000 0 0x1000>;
+ #pwm-cells = <2>;
+ interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&infracfg CLK_IFR_PWM_HCLK>,
+ <&infracfg CLK_IFR_PWM>,
+ <&infracfg CLK_IFR_PWM1>,
+ <&infracfg CLK_IFR_PWM2>,
+ <&infracfg CLK_IFR_PWM3>;
+ clock-names = "top", "main", "pwm1", "pwm2", "pwm3";
+ };
+
+ i2c0: i2c@11007000 {
+ compatible = "mediatek,mt8365-i2c",
+ "mediatek,mt8168-i2c";
+ reg = <0 0x11007000 0 0xa0>,
+ <0 0x11000080 0 0x80>;
+ interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_LOW>;
+ clock-div = <1>;
+ clocks = <&infracfg CLK_IFR_I2C0_AXI>,
+ <&infracfg CLK_IFR_AP_DMA>;
+ clock-names = "main", "dma";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@11008000 {
+ compatible = "mediatek,mt8365-i2c",
+ "mediatek,mt8168-i2c";
+ reg = <0 0x11008000 0 0xa0>,
+ <0 0x11000100 0 0x80>;
+ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_LOW>;
+ clock-div = <1>;
+ clocks = <&infracfg CLK_IFR_I2C1_AXI>,
+ <&infracfg CLK_IFR_AP_DMA>;
+ clock-names = "main", "dma";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@11009000 {
+ compatible = "mediatek,mt8365-i2c",
+ "mediatek,mt8168-i2c";
+ reg = <0 0x11009000 0 0xa0>,
+ <0 0x11000180 0 0x80>;
+ interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_LOW>;
+ clock-div = <1>;
+ clocks = <&infracfg CLK_IFR_I2C2_AXI>,
+ <&infracfg CLK_IFR_AP_DMA>;
+ clock-names = "main", "dma";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi: spi@1100a000 {
+ compatible = "mediatek,mt8365-spi",
+ "mediatek,mt7622-spi";
+ reg = <0 0x1100a000 0 0x100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&topckgen CLK_TOP_UNIVPLL2_D4>,
+ <&topckgen CLK_TOP_SPI_SEL>,
+ <&infracfg CLK_IFR_SPI0>;
+ clock-names = "parent-clk", "sel-clk", "spi-clk";
+ status = "disabled";
+ };
+
+ thermal: thermal@1100b000 {
+ compatible = "mediatek,mt8365-thermal";
+ reg = <0 0x1100b000 0 0x1000>;
+ interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&infracfg CLK_IFR_THERM>,
+ <&infracfg CLK_IFR_AUXADC>;
+ clock-names = "therm", "auxadc";
+ mediatek,auxadc = <&auxadc>;
+ mediatek,apmixedsys = <&apmixedsys>;
+ nvmem-cells = <&thermal_calibration>;
+ nvmem-cell-names = "calibration-data";
+ #thermal-sensor-cells = <1>;
+ };
+
+ i2c3: i2c@1100f000 {
+ compatible = "mediatek,mt8365-i2c",
+ "mediatek,mt8168-i2c";
+ reg = <0 0x1100f000 0 0xa0>,
+ <0 0x11000200 0 0x80>;
+ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_LOW>;
+ clock-div = <1>;
+ clocks = <&infracfg CLK_IFR_I2C3_AXI>,
+ <&infracfg CLK_IFR_AP_DMA>;
+ clock-names = "main", "dma";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ ssusb: usb@11201000 {
+ compatible = "mediatek,mt8365-mtu3", "mediatek,mtu3";
+ reg = <0 0x11201000 0 0x2e00>,
+ <0 0x11203e00 0 0x0100>;
+ reg-names = "mac", "ippc";
+ interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_LOW>;
+ phys = <&u2port0 PHY_TYPE_USB2>,
+ <&u2port1 PHY_TYPE_USB2>;
+ clocks = <&topckgen CLK_TOP_SSUSB_TOP_CK_EN>,
+ <&infracfg CLK_IFR_SSUSB_REF>,
+ <&infracfg CLK_IFR_SSUSB_SYS>,
+ <&infracfg CLK_IFR_ICUSB>;
+ clock-names = "sys_ck", "ref_ck", "mcu_ck",
+ "dma_ck";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ status = "disabled";
+
+ usb_host: usb@11200000 {
+ compatible = "mediatek,mt8365-xhci",
+ "mediatek,mtk-xhci";
+ reg = <0 0x11200000 0 0x1000>;
+ reg-names = "mac";
+ interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&topckgen CLK_TOP_SSUSB_TOP_CK_EN>,
+ <&infracfg CLK_IFR_SSUSB_REF>,
+ <&infracfg CLK_IFR_SSUSB_SYS>,
+ <&infracfg CLK_IFR_ICUSB>,
+ <&infracfg CLK_IFR_SSUSB_XHCI>;
+ clock-names = "sys_ck", "ref_ck", "mcu_ck",
+ "dma_ck", "xhci_ck";
+ status = "disabled";
+ };
+ };
+
+ mmc0: mmc@11230000 {
+ compatible = "mediatek,mt8365-mmc", "mediatek,mt8183-mmc";
+ reg = <0 0x11230000 0 0x1000>,
+ <0 0x11cd0000 0 0x1000>;
+ interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&topckgen CLK_TOP_MSDC50_0_SEL>,
+ <&infracfg CLK_IFR_MSDC0_HCLK>,
+ <&infracfg CLK_IFR_MSDC0_SRC>;
+ clock-names = "source", "hclk", "source_cg";
+ status = "disabled";
+ };
+
+ mmc1: mmc@11240000 {
+ compatible = "mediatek,mt8365-mmc", "mediatek,mt8183-mmc";
+ reg = <0 0x11240000 0 0x1000>,
+ <0 0x11c90000 0 0x1000>;
+ interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&topckgen CLK_TOP_MSDC30_1_SEL>,
+ <&infracfg CLK_IFR_MSDC1_HCLK>,
+ <&infracfg CLK_IFR_MSDC1_SRC>;
+ clock-names = "source", "hclk", "source_cg";
+ status = "disabled";
+ };
+
+ ethernet: ethernet@112a0000 {
+ compatible = "mediatek,mt8365-eth";
+ reg = <0 0x112a0000 0 0x1000>;
+ mediatek,pericfg = <&infracfg>;
+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&topckgen CLK_TOP_ETH_SEL>,
+ <&infracfg CLK_IFR_NIC_AXI>,
+ <&infracfg CLK_IFR_NIC_SLV_AXI>;
+ clock-names = "core", "reg", "trans";
+ status = "disabled";
+ };
+
+ mipi_tx0: dsi-phy@11c00000 {
+ compatible = "mediatek,mt8365-mipi-tx",
+ "mediatek,mt8183-mipi-tx";
+ reg = <0 0x11c00000 0 0x800>;
+ clocks = <&clk26m>;
+ clock-names = "ref_clk";
+ #clock-cells = <0>;
+ #phy-cells = <0>;
+ clock-output-names = "mipi_tx0_pll";
+ };
+
+ efuse: efuse@11c50000 {
+ compatible = "mediatek,mt8365-efuse", "mediatek,efuse";
+ reg = <0 0x11c50000 0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ thermal_calibration: calib@180 {
+ reg = <0x180 0xc>;
+ };
+ };
+
+ u3phy: t-phy@11cc0000 {
+ compatible = "mediatek,mt8365-tphy",
+ "mediatek,generic-tphy-v2";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ #phy-cells = <1>;
+ ranges;
+
+ u2port0: usb-phy@11cc0000 {
+ reg = <0 0x11cc0000 0 0x400>;
+ clocks = <&topckgen CLK_TOP_SSUSB_PHY_CK_EN>,
+ <&topckgen CLK_TOP_USB20_48M_EN>;
+ clock-names = "ref", "da_ref";
+ #phy-cells = <1>;
+ };
+
+ u2port1: usb-phy@11cc1000 {
+ reg = <0 0x11cc1000 0 0x400>;
+ clocks = <&topckgen CLK_TOP_SSUSB_PHY_CK_EN>,
+ <&topckgen CLK_TOP_USB20_48M_EN>;
+ clock-names = "ref", "da_ref";
+ #phy-cells = <1>;
+ };
+ };
+
+ mfgcfg: syscon@13000000 {
+ compatible = "mediatek,mt8365-mfgcfg", "syscon";
+ reg = <0 0x13000000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ mmsys: syscon@14000000 {
+ compatible = "mediatek,mt8365-mmsys", "syscon";
+ reg = <0 0x14000000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ camsys: syscon@15000000 {
+ compatible = "mediatek,mt8365-imgsys", "syscon";
+ reg = <0 0x15000000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ vdecsys: syscon@16000000 {
+ compatible = "mediatek,mt8365-vdecsys", "syscon";
+ reg = <0 0x16000000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ vencsys: syscon@17000000 {
+ compatible = "mediatek,mt8365-vencsys", "syscon";
+ reg = <0 0x17000000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ apu: syscon@19020000 {
+ compatible = "mediatek,mt8365-apu", "syscon";
+ reg = <0 0x19020000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+ };
+
+ thermal-zones {
+ cpu_thermal: cpu-thermal {
+ polling-delay-passive = <1000>; /* milliseconds */
+ polling-delay = <1000>; /* milliseconds */
+ thermal-sensors = <&thermal 0>;
+
+ trips {
+ threshold: trip-point0 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ target: trip-point1 {
+ temperature = <105000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_crit: cpu_crit0 {
+ temperature = <117000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&target>;
+ cooling-device =
+ <&cpu0
+ THERMAL_NO_LIMIT
+ THERMAL_NO_LIMIT>,
+ <&cpu1
+ THERMAL_NO_LIMIT
+ THERMAL_NO_LIMIT>,
+ <&cpu2
+ THERMAL_NO_LIMIT
+ THERMAL_NO_LIMIT>,
+ <&cpu3
+ THERMAL_NO_LIMIT
+ THERMAL_NO_LIMIT>;
+ contribution = <100>;
+ };
+ };
+ };
+ };
+
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW 0>,
+ <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW 0>,
+ <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW 0>,
+ <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW 0>;
+ };
+};
--
2.38.1
On 07/11/2022 22:10, Bernhard Rosenkränzer wrote:
> From: Fabien Parent <[email protected]>
>
> This adds minimal support for the MediaTek 8365 SOC and the EVK reference
> board, allowing the board to boot to initramfs with serial port I/O.
>
> GPIO keys are supported, MMC is partially supported (needs the clocks
> driver for full support).
>
> Signed-off-by: Fabien Parent <[email protected]>
> [[email protected]: Removed parts depending on drivers that aren't upstream yet, cleanups]
> Signed-off-by: Bernhard Rosenkränzer <[email protected]>
> ---
>
> Compared to the previous version of the patch submitted by Fabien
> Parent, this removes dependencies on drivers/patches that are not yet in
> mainline (obviously this comes with some reduced functionality for now;
> this will be added back as drivers are accepted), and addresses some
> feedback from reviewers.
>
> arch/arm64/boot/dts/mediatek/Makefile | 1 +
> arch/arm64/boot/dts/mediatek/mt8365-evk.dts | 344 +++++++++++
> arch/arm64/boot/dts/mediatek/mt8365.dtsi | 602 ++++++++++++++++++++
> 3 files changed, 947 insertions(+)
> create mode 100644 arch/arm64/boot/dts/mediatek/mt8365-evk.dts
> create mode 100644 arch/arm64/boot/dts/mediatek/mt8365.dtsi
>
> diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
> index 0ec90cb3ef289..e668fd50a3326 100644
> --- a/arch/arm64/boot/dts/mediatek/Makefile
> +++ b/arch/arm64/boot/dts/mediatek/Makefile
> @@ -46,4 +46,5 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-cherry-tomato-r2.dtb
> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-cherry-tomato-r3.dtb
> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-demo.dtb
> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-evb.dtb
> +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8365-evk.dtb
> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8516-pumpkin.dtb
> diff --git a/arch/arm64/boot/dts/mediatek/mt8365-evk.dts b/arch/arm64/boot/dts/mediatek/mt8365-evk.dts
> new file mode 100644
> index 0000000000000..a24e478fff51f
> --- /dev/null
> +++ b/arch/arm64/boot/dts/mediatek/mt8365-evk.dts
> @@ -0,0 +1,344 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2021-2022 BayLibre, SAS.
> + * Authors:
> + * Fabien Parent <[email protected]>
> + * Bernhard Rosenkränzer <[email protected]>
> + */
> +
> +/dts-v1/;
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
> +#include <dt-bindings/pinctrl/mt8365-pinfunc.h>
> +#include "mt8365.dtsi"
> +
> +/ {
> + model = "MediaTek MT8365 Open Platform EVK";
> + compatible = "mediatek,mt8365-evk", "mediatek,mt8365";
Missing documentation.
Run checkpatch on your patches. It will print several warnings, which
must be fixed.
> +
> + aliases {
> + serial0 = &uart0;
> + };
> +
> + chosen {
> + stdout-path = "serial0:921600n8";
> + };
> +
> + firmware {
> + optee {
> + compatible = "linaro,optee-tz";
> + method = "smc";
> + };
> + };
> +
> + gpio-keys {
> + compatible = "gpio-keys";
> + input-name = "gpio-keys";
> + pinctrl-names = "default";
> + pinctrl-0 = <&gpio_keys>;
> +
> + key-volume-up {
> + gpios = <&pio 24 GPIO_ACTIVE_LOW>;
> + label = "volume_up";
> + linux,code = <KEY_VOLUMEUP>;
> + wakeup-source;
> + debounce-interval = <15>;
> + };
> + };
> +
> + memory@40000000 {
> + device_type = "memory";
> + reg = <0 0x40000000 0 0xc0000000>;
> + };
> +
> + usb_otg_vbus: regulator-2 {
Where are regulators 0 and 1 (or just 1)?
> + compatible = "regulator-fixed";
> + regulator-name = "otg_vbus";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + gpio = <&pio 16 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> + };
> +
(...)
> +
> + mcucfg: syscon@10200000 {
> + compatible = "mediatek,mt8365-mcucfg", "syscon";
> + reg = <0 0x10200000 0 0x2000>;
> + #clock-cells = <1>;
> + };
> +
> + sysirq: interrupt-controller@10200a80 {
> + compatible = "mediatek,mt8365-sysirq",
> + "mediatek,mt6577-sysirq";
> + interrupt-controller;
> + #interrupt-cells = <3>;
> + interrupt-parent = <&gic>;
> + reg = <0 0x10200a80 0 0x20>;
> + };
> +
> + infracfg_nao: infracfg-nao@1020e000 {
Node names should be generic.
https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation
> + compatible = "syscon";
Not allowed on its own.
> + reg = <0 0x1020e000 0 0x1000>;
> + };
> +
> + rng: rng@1020f000 {
> + compatible = "mediatek,mt8365-rng",
> + "mediatek,mt7623-rng";
> + reg = <0 0x1020f000 0 0x100>;
> + clocks = <&infracfg CLK_IFR_TRNG>;
> + clock-names = "rng";
> + };
> +
> + apdma: dma-controller@11000280 {
> + compatible = "mediatek,mt8365-uart-dma",
> + "mediatek,mt6577-uart-dma";
> + reg = <0 0x11000280 0 0x80>,
> + <0 0x11000300 0 0x80>,
> + <0 0x11000380 0 0x80>,
> + <0 0x11000400 0 0x80>,
> + <0 0x11000580 0 0x80>,
> + <0 0x11000600 0 0x80>;
> + interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_LOW>,
> + <GIC_SPI 46 IRQ_TYPE_LEVEL_LOW>,
> + <GIC_SPI 47 IRQ_TYPE_LEVEL_LOW>,
> + <GIC_SPI 48 IRQ_TYPE_LEVEL_LOW>,
> + <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>,
> + <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>;
> + dma-requests = <6>;
> + clocks = <&infracfg CLK_IFR_AP_DMA>;
> + clock-names = "apdma";
> + #dma-cells = <1>;
> + };
> +
> + auxadc: adc@11001000 {
> + compatible = "mediatek,mt8365-auxadc",
> + "mediatek,mt8173-auxadc";
> + reg = <0 0x11001000 0 0x1000>;
> + clocks = <&infracfg CLK_IFR_AUXADC>;
> + clock-names = "main";
> + #io-channel-cells = <1>;
> + };
> +
> + uart0: serial@11002000 {
> + compatible = "mediatek,mt8365-uart",
> + "mediatek,mt6577-uart";
> + reg = <0 0x11002000 0 0x1000>;
> + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&clk26m>, <&infracfg CLK_IFR_UART0>;
> + clock-names = "baud", "bus";
> + dmas = <&apdma 0>, <&apdma 1>;
> + dma-names = "tx", "rx";
> + status = "disabled";
> + };
> +
> + uart1: serial@11003000 {
> + compatible = "mediatek,mt8365-uart",
> + "mediatek,mt6577-uart";
> + reg = <0 0x11003000 0 0x1000>;
> + interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&clk26m>, <&infracfg CLK_IFR_UART1>;
> + clock-names = "baud", "bus";
> + dmas = <&apdma 2>, <&apdma 3>;
> + dma-names = "tx", "rx";
> + status = "disabled";
> + };
> +
> + uart2: serial@11004000 {
> + compatible = "mediatek,mt8365-uart",
> + "mediatek,mt6577-uart";
> + reg = <0 0x11004000 0 0x1000>;
> + interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&clk26m>, <&infracfg CLK_IFR_UART2>;
> + clock-names = "baud", "bus";
> + dmas = <&apdma 4>, <&apdma 5>;
> + dma-names = "tx", "rx";
> + status = "disabled";
> + };
> +
> + pwm: pwm@11006000 {
> + compatible = "mediatek,mt8365-pwm";
> + reg = <0 0x11006000 0 0x1000>;
> + #pwm-cells = <2>;
> + interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&infracfg CLK_IFR_PWM_HCLK>,
> + <&infracfg CLK_IFR_PWM>,
> + <&infracfg CLK_IFR_PWM1>,
> + <&infracfg CLK_IFR_PWM2>,
> + <&infracfg CLK_IFR_PWM3>;
> + clock-names = "top", "main", "pwm1", "pwm2", "pwm3";
> + };
> +
> + i2c0: i2c@11007000 {
> + compatible = "mediatek,mt8365-i2c",
> + "mediatek,mt8168-i2c";
> + reg = <0 0x11007000 0 0xa0>,
> + <0 0x11000080 0 0x80>;
> + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_LOW>;
> + clock-div = <1>;
> + clocks = <&infracfg CLK_IFR_I2C0_AXI>,
> + <&infracfg CLK_IFR_AP_DMA>;
> + clock-names = "main", "dma";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + i2c1: i2c@11008000 {
> + compatible = "mediatek,mt8365-i2c",
> + "mediatek,mt8168-i2c";
> + reg = <0 0x11008000 0 0xa0>,
> + <0 0x11000100 0 0x80>;
> + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_LOW>;
> + clock-div = <1>;
> + clocks = <&infracfg CLK_IFR_I2C1_AXI>,
> + <&infracfg CLK_IFR_AP_DMA>;
> + clock-names = "main", "dma";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + i2c2: i2c@11009000 {
> + compatible = "mediatek,mt8365-i2c",
> + "mediatek,mt8168-i2c";
> + reg = <0 0x11009000 0 0xa0>,
> + <0 0x11000180 0 0x80>;
> + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_LOW>;
> + clock-div = <1>;
> + clocks = <&infracfg CLK_IFR_I2C2_AXI>,
> + <&infracfg CLK_IFR_AP_DMA>;
> + clock-names = "main", "dma";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + spi: spi@1100a000 {
> + compatible = "mediatek,mt8365-spi",
> + "mediatek,mt7622-spi";
> + reg = <0 0x1100a000 0 0x100>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&topckgen CLK_TOP_UNIVPLL2_D4>,
> + <&topckgen CLK_TOP_SPI_SEL>,
> + <&infracfg CLK_IFR_SPI0>;
> + clock-names = "parent-clk", "sel-clk", "spi-clk";
> + status = "disabled";
> + };
> +
> + thermal: thermal@1100b000 {
> + compatible = "mediatek,mt8365-thermal";
> + reg = <0 0x1100b000 0 0x1000>;
> + interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&infracfg CLK_IFR_THERM>,
> + <&infracfg CLK_IFR_AUXADC>;
> + clock-names = "therm", "auxadc";
> + mediatek,auxadc = <&auxadc>;
> + mediatek,apmixedsys = <&apmixedsys>;
> + nvmem-cells = <&thermal_calibration>;
> + nvmem-cell-names = "calibration-data";
> + #thermal-sensor-cells = <1>;
> + };
> +
> + i2c3: i2c@1100f000 {
> + compatible = "mediatek,mt8365-i2c",
> + "mediatek,mt8168-i2c";
> + reg = <0 0x1100f000 0 0xa0>,
> + <0 0x11000200 0 0x80>;
> + interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_LOW>;
> + clock-div = <1>;
> + clocks = <&infracfg CLK_IFR_I2C3_AXI>,
> + <&infracfg CLK_IFR_AP_DMA>;
> + clock-names = "main", "dma";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + ssusb: usb@11201000 {
> + compatible = "mediatek,mt8365-mtu3", "mediatek,mtu3";
> + reg = <0 0x11201000 0 0x2e00>,
> + <0 0x11203e00 0 0x0100>;
> + reg-names = "mac", "ippc";
> + interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_LOW>;
> + phys = <&u2port0 PHY_TYPE_USB2>,
> + <&u2port1 PHY_TYPE_USB2>;
> + clocks = <&topckgen CLK_TOP_SSUSB_TOP_CK_EN>,
> + <&infracfg CLK_IFR_SSUSB_REF>,
> + <&infracfg CLK_IFR_SSUSB_SYS>,
> + <&infracfg CLK_IFR_ICUSB>;
> + clock-names = "sys_ck", "ref_ck", "mcu_ck",
> + "dma_ck";
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> + status = "disabled";
> +
> + usb_host: usb@11200000 {
> + compatible = "mediatek,mt8365-xhci",
> + "mediatek,mtk-xhci";
> + reg = <0 0x11200000 0 0x1000>;
> + reg-names = "mac";
> + interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&topckgen CLK_TOP_SSUSB_TOP_CK_EN>,
> + <&infracfg CLK_IFR_SSUSB_REF>,
> + <&infracfg CLK_IFR_SSUSB_SYS>,
> + <&infracfg CLK_IFR_ICUSB>,
> + <&infracfg CLK_IFR_SSUSB_XHCI>;
> + clock-names = "sys_ck", "ref_ck", "mcu_ck",
> + "dma_ck", "xhci_ck";
> + status = "disabled";
> + };
> + };
> +
> + mmc0: mmc@11230000 {
> + compatible = "mediatek,mt8365-mmc", "mediatek,mt8183-mmc";
> + reg = <0 0x11230000 0 0x1000>,
> + <0 0x11cd0000 0 0x1000>;
> + interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&topckgen CLK_TOP_MSDC50_0_SEL>,
> + <&infracfg CLK_IFR_MSDC0_HCLK>,
> + <&infracfg CLK_IFR_MSDC0_SRC>;
> + clock-names = "source", "hclk", "source_cg";
> + status = "disabled";
> + };
> +
> + mmc1: mmc@11240000 {
> + compatible = "mediatek,mt8365-mmc", "mediatek,mt8183-mmc";
> + reg = <0 0x11240000 0 0x1000>,
> + <0 0x11c90000 0 0x1000>;
> + interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&topckgen CLK_TOP_MSDC30_1_SEL>,
> + <&infracfg CLK_IFR_MSDC1_HCLK>,
> + <&infracfg CLK_IFR_MSDC1_SRC>;
> + clock-names = "source", "hclk", "source_cg";
> + status = "disabled";
> + };
> +
> + ethernet: ethernet@112a0000 {
> + compatible = "mediatek,mt8365-eth";
> + reg = <0 0x112a0000 0 0x1000>;
> + mediatek,pericfg = <&infracfg>;
> + interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&topckgen CLK_TOP_ETH_SEL>,
> + <&infracfg CLK_IFR_NIC_AXI>,
> + <&infracfg CLK_IFR_NIC_SLV_AXI>;
> + clock-names = "core", "reg", "trans";
> + status = "disabled";
> + };
> +
> + mipi_tx0: dsi-phy@11c00000 {
> + compatible = "mediatek,mt8365-mipi-tx",
> + "mediatek,mt8183-mipi-tx";
> + reg = <0 0x11c00000 0 0x800>;
> + clocks = <&clk26m>;
> + clock-names = "ref_clk";
> + #clock-cells = <0>;
> + #phy-cells = <0>;
> + clock-output-names = "mipi_tx0_pll";
> + };
> +
> + efuse: efuse@11c50000 {
> + compatible = "mediatek,mt8365-efuse", "mediatek,efuse";
> + reg = <0 0x11c50000 0 0x1000>;
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + thermal_calibration: calib@180 {
> + reg = <0x180 0xc>;
> + };
> + };
> +
> + u3phy: t-phy@11cc0000 {
Node names should be generic, so just phy
https://devicetree-specification.readthedocs.io/en/latest/chapter2-devicetree-basics.html#generic-names-recommendation
> + compatible = "mediatek,mt8365-tphy",
> + "mediatek,generic-tphy-v2";
> + #address-cells = <2>;
> + #size-cells = <2>;
> + #phy-cells = <1>;
> + ranges;
> +
> + u2port0: usb-phy@11cc0000 {
> + reg = <0 0x11cc0000 0 0x400>;
> + clocks = <&topckgen CLK_TOP_SSUSB_PHY_CK_EN>,
> + <&topckgen CLK_TOP_USB20_48M_EN>;
> + clock-names = "ref", "da_ref";
> + #phy-cells = <1>;
> + };
> +
> + u2port1: usb-phy@11cc1000 {
> + reg = <0 0x11cc1000 0 0x400>;
> + clocks = <&topckgen CLK_TOP_SSUSB_PHY_CK_EN>,
> + <&topckgen CLK_TOP_USB20_48M_EN>;
> + clock-names = "ref", "da_ref";
> + #phy-cells = <1>;
> + };
> + };
> +
> + mfgcfg: syscon@13000000 {
> + compatible = "mediatek,mt8365-mfgcfg", "syscon";
> + reg = <0 0x13000000 0 0x1000>;
> + #clock-cells = <1>;
> + };
> +
> + mmsys: syscon@14000000 {
> + compatible = "mediatek,mt8365-mmsys", "syscon";
> + reg = <0 0x14000000 0 0x1000>;
> + #clock-cells = <1>;
> + };
> +
> + camsys: syscon@15000000 {
> + compatible = "mediatek,mt8365-imgsys", "syscon";
> + reg = <0 0x15000000 0 0x1000>;
> + #clock-cells = <1>;
> + };
> +
> + vdecsys: syscon@16000000 {
> + compatible = "mediatek,mt8365-vdecsys", "syscon";
> + reg = <0 0x16000000 0 0x1000>;
> + #clock-cells = <1>;
> + };
> +
> + vencsys: syscon@17000000 {
> + compatible = "mediatek,mt8365-vencsys", "syscon";
> + reg = <0 0x17000000 0 0x1000>;
> + #clock-cells = <1>;
> + };
> +
> + apu: syscon@19020000 {
> + compatible = "mediatek,mt8365-apu", "syscon";
> + reg = <0 0x19020000 0 0x1000>;
> + #clock-cells = <1>;
> + };
> + };
> +
> + thermal-zones {
> + cpu_thermal: cpu-thermal {
> + polling-delay-passive = <1000>; /* milliseconds */
> + polling-delay = <1000>; /* milliseconds */
> + thermal-sensors = <&thermal 0>;
> +
> + trips {
> + threshold: trip-point0 {
> + temperature = <95000>;
> + hysteresis = <2000>;
> + type = "passive";
> + };
> +
> + target: trip-point1 {
> + temperature = <105000>;
> + hysteresis = <2000>;
> + type = "passive";
> + };
> +
> + cpu_crit: cpu_crit0 {
> + temperature = <117000>;
> + hysteresis = <2000>;
> + type = "critical";
> + };
> + };
> +
> + cooling-maps {
> + map0 {
> + trip = <&target>;
> + cooling-device =
> + <&cpu0
> + THERMAL_NO_LIMIT
> + THERMAL_NO_LIMIT>,
> + <&cpu1
> + THERMAL_NO_LIMIT
> + THERMAL_NO_LIMIT>,
> + <&cpu2
> + THERMAL_NO_LIMIT
> + THERMAL_NO_LIMIT>,
> + <&cpu3
> + THERMAL_NO_LIMIT
> + THERMAL_NO_LIMIT>;
> + contribution = <100>;
> + };
> + };
> + };
> + };
> +
> +
Only one blank line.
> + timer {
> + compatible = "arm,armv8-timer";
> + interrupt-parent = <&gic>;
> + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW 0>,
> + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW 0>,
> + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW 0>,
> + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW 0>;
> + };
> +};
Best regards,
Krzysztof
This adds minimal support for the MediaTek 8365 SOC and the EVK reference
board, allowing the board to boot to initramfs with serial port I/O.
GPIO keys are supported, MMC is partially supported (needs the clocks
driver for full support).
v2:
- Add missing dt-bindings documentation
- Small cleanups addressing issues in v1 pointed out by Krzysztof Kozlowski
Add devicetree bindings for Mediatek MT8365 pinctrl driver.
Signed-off-by: Bernhard Rosenkränzer <[email protected]>
---
.../pinctrl/mediatek,mt8365-pinctrl.yaml | 68 +++++++++++++++++++
1 file changed, 68 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pinctrl/mediatek,mt8365-pinctrl.yaml
diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt8365-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt8365-pinctrl.yaml
new file mode 100644
index 0000000000000..bddff8c2fd382
--- /dev/null
+++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt8365-pinctrl.yaml
@@ -0,0 +1,68 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pinctrl/mediatek,mt8365-pinctrl.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Mediatek MT8365 Pin Controller
+
+maintainers:
+ - Bernhard Rosenkränzer <[email protected]>
+
+description: |+
+ The MediaTek's MT8365 Pin controller is used to control SoC pins.
+
+properties:
+ compatible:
+ const: mediatek,mt8365-pinctrl
+
+ reg:
+ minItems: 1
+ maxItems: 1
+
+ gpio-controller: true
+
+ "#gpio-cells":
+ const: 2
+ description: |
+ Number of cells in GPIO specifier. Since the generic GPIO
+ binding is used, the amount of cells must be specified as 2. See the below
+ mentioned gpio binding representation for description of particular cells.
+
+ interrupt-controller: true
+
+ interrupts:
+ maxItems: 1
+
+ "#interrupt-cells":
+ const: 2
+
+allOf:
+ - $ref: "pinctrl.yaml#"
+
+required:
+ - compatible
+ - reg
+ - gpio-controller
+ - "#gpio-cells"
+
+additionalProperties: false
+
+examples:
+ - |
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ pio: pinctrl@1000b000 {
+ compatible = "mediatek,mt8365-pinctrl";
+ reg = <0 0x1000b000 0 0x1000>;
+ mediatek,pctl-regmap = <&syscfg_pctl>;
+ pins-are-numbered;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+ };
+ };
--
2.38.1
From: Fabien Parent <[email protected]>
This adds minimal support for the Mediatek 8365 SOC and the EVK reference
board, allowing the board to boot to initramfs with serial port I/O.
GPIO keys are supported, MMC is partially supported (needs the clocks
driver for full support).
Signed-off-by: Fabien Parent <[email protected]>
[[email protected]: Removed parts depending on drivers that aren't upstream yet, cleanups]
Signed-off-by: Bernhard Rosenkränzer <[email protected]>
---
arch/arm64/boot/dts/mediatek/Makefile | 1 +
arch/arm64/boot/dts/mediatek/mt8365-evk.dts | 344 +++++++++++
arch/arm64/boot/dts/mediatek/mt8365.dtsi | 601 ++++++++++++++++++++
3 files changed, 946 insertions(+)
create mode 100644 arch/arm64/boot/dts/mediatek/mt8365-evk.dts
create mode 100644 arch/arm64/boot/dts/mediatek/mt8365.dtsi
diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
index 0ec90cb3ef289..e668fd50a3326 100644
--- a/arch/arm64/boot/dts/mediatek/Makefile
+++ b/arch/arm64/boot/dts/mediatek/Makefile
@@ -46,4 +46,5 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-cherry-tomato-r2.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-cherry-tomato-r3.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-demo.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-evb.dtb
+dtb-$(CONFIG_ARCH_MEDIATEK) += mt8365-evk.dtb
dtb-$(CONFIG_ARCH_MEDIATEK) += mt8516-pumpkin.dtb
diff --git a/arch/arm64/boot/dts/mediatek/mt8365-evk.dts b/arch/arm64/boot/dts/mediatek/mt8365-evk.dts
new file mode 100644
index 0000000000000..74e0f75231637
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8365-evk.dts
@@ -0,0 +1,344 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (c) 2021-2022 BayLibre, SAS.
+ * Authors:
+ * Fabien Parent <[email protected]>
+ * Bernhard Rosenkränzer <[email protected]>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/pinctrl/mt8365-pinfunc.h>
+#include "mt8365.dtsi"
+
+/ {
+ model = "MediaTek MT8365 Open Platform EVK";
+ compatible = "mediatek,mt8365-evk", "mediatek,mt8365";
+
+ aliases {
+ serial0 = &uart0;
+ };
+
+ chosen {
+ stdout-path = "serial0:921600n8";
+ };
+
+ firmware {
+ optee {
+ compatible = "linaro,optee-tz";
+ method = "smc";
+ };
+ };
+
+ gpio-keys {
+ compatible = "gpio-keys";
+ input-name = "gpio-keys";
+ pinctrl-names = "default";
+ pinctrl-0 = <&gpio_keys>;
+
+ key-volume-up {
+ gpios = <&pio 24 GPIO_ACTIVE_LOW>;
+ label = "volume_up";
+ linux,code = <KEY_VOLUMEUP>;
+ wakeup-source;
+ debounce-interval = <15>;
+ };
+ };
+
+ memory@40000000 {
+ device_type = "memory";
+ reg = <0 0x40000000 0 0xc0000000>;
+ };
+
+ usb_otg_vbus: regulator-0 {
+ compatible = "regulator-fixed";
+ regulator-name = "otg_vbus";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&pio 16 GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ /* 12 MiB reserved for OP-TEE (BL32)
+ * +-----------------------+ 0x43e0_0000
+ * | SHMEM 2MiB |
+ * +-----------------------+ 0x43c0_0000
+ * | | TA_RAM 8MiB |
+ * + TZDRAM +--------------+ 0x4340_0000
+ * | | TEE_RAM 2MiB |
+ * +-----------------------+ 0x4320_0000
+ */
+ optee_reserved: optee@43200000 {
+ no-map;
+ reg = <0 0x43200000 0 0x00c00000>;
+ };
+ };
+};
+
+&i2c1 {
+ pinctrl-names = "default";
+ pinctrl-0 = <&i2c1_pins>;
+ clock-frequency = <100000>;
+ status = "okay";
+};
+
+&pio {
+ dpi_func_pins: dpi-func-pins {
+ pins {
+ pinmux = <MT8365_PIN_0_GPIO0__FUNC_DPI_D0>,
+ <MT8365_PIN_1_GPIO1__FUNC_DPI_D1>,
+ <MT8365_PIN_2_GPIO2__FUNC_DPI_D2>,
+ <MT8365_PIN_3_GPIO3__FUNC_DPI_D3>,
+ <MT8365_PIN_4_GPIO4__FUNC_DPI_D4>,
+ <MT8365_PIN_5_GPIO5__FUNC_DPI_D5>,
+ <MT8365_PIN_6_GPIO6__FUNC_DPI_D6>,
+ <MT8365_PIN_7_GPIO7__FUNC_DPI_D7>,
+ <MT8365_PIN_8_GPIO8__FUNC_DPI_D8>,
+ <MT8365_PIN_9_GPIO9__FUNC_DPI_D9>,
+ <MT8365_PIN_10_GPIO10__FUNC_DPI_D10>,
+ <MT8365_PIN_11_GPIO11__FUNC_DPI_D11>,
+ <MT8365_PIN_12_GPIO12__FUNC_DPI_DE>,
+ <MT8365_PIN_13_GPIO13__FUNC_DPI_VSYNC>,
+ <MT8365_PIN_14_GPIO14__FUNC_DPI_CK>,
+ <MT8365_PIN_15_GPIO15__FUNC_DPI_HSYNC>;
+ drive-strength = <MTK_DRIVE_4mA>;
+ };
+ };
+
+ dpi_idle_pins: dpi-idle-pins {
+ pins {
+ pinmux = <MT8365_PIN_0_GPIO0__FUNC_GPIO0>,
+ <MT8365_PIN_1_GPIO1__FUNC_GPIO1>,
+ <MT8365_PIN_2_GPIO2__FUNC_GPIO2>,
+ <MT8365_PIN_3_GPIO3__FUNC_GPIO3>,
+ <MT8365_PIN_4_GPIO4__FUNC_GPIO4>,
+ <MT8365_PIN_5_GPIO5__FUNC_GPIO5>,
+ <MT8365_PIN_6_GPIO6__FUNC_GPIO6>,
+ <MT8365_PIN_7_GPIO7__FUNC_GPIO7>,
+ <MT8365_PIN_8_GPIO8__FUNC_GPIO8>,
+ <MT8365_PIN_9_GPIO9__FUNC_GPIO9>,
+ <MT8365_PIN_10_GPIO10__FUNC_GPIO10>,
+ <MT8365_PIN_11_GPIO11__FUNC_GPIO11>,
+ <MT8365_PIN_12_GPIO12__FUNC_GPIO12>,
+ <MT8365_PIN_13_GPIO13__FUNC_GPIO13>,
+ <MT8365_PIN_14_GPIO14__FUNC_GPIO14>,
+ <MT8365_PIN_15_GPIO15__FUNC_GPIO15>;
+ };
+ };
+
+ gpio_keys: gpio-keys-pins {
+ pins {
+ pinmux = <MT8365_PIN_24_KPCOL0__FUNC_KPCOL0>;
+ bias-pull-up;
+ input-enable;
+ };
+ };
+
+ i2c1_pins: i2c1-pins {
+ pins {
+ pinmux = <MT8365_PIN_59_SDA1__FUNC_SDA1_0>,
+ <MT8365_PIN_60_SCL1__FUNC_SCL1_0>;
+ mediatek,pull-up-adv = <3>;
+ mediatek,drive-strength-adv = <00>;
+ bias-pull-up;
+ };
+ };
+
+ ite_pins: ite-pins {
+ pins-rst-ite {
+ pinmux = <MT8365_PIN_69_CMDAT1__FUNC_GPIO69>;
+ output-high;
+ };
+
+ pins-irq-ite {
+ pinmux = <MT8365_PIN_68_CMDAT0__FUNC_GPIO68>;
+ input-enable;
+ bias-pull-up;
+ };
+
+ pins-pwr {
+ pinmux = <MT8365_PIN_70_CMDAT2__FUNC_GPIO70>,
+ <MT8365_PIN_71_CMDAT3__FUNC_GPIO71>;
+ output-high;
+ };
+ };
+
+ mmc0_pins_default: mmc0-default-pins {
+ pins-clk {
+ pinmux = <MT8365_PIN_99_MSDC0_CLK__FUNC_MSDC0_CLK>;
+ bias-pull-down;
+ };
+
+ pins-cmd-dat {
+ pinmux = <MT8365_PIN_103_MSDC0_DAT0__FUNC_MSDC0_DAT0>,
+ <MT8365_PIN_102_MSDC0_DAT1__FUNC_MSDC0_DAT1>,
+ <MT8365_PIN_101_MSDC0_DAT2__FUNC_MSDC0_DAT2>,
+ <MT8365_PIN_100_MSDC0_DAT3__FUNC_MSDC0_DAT3>,
+ <MT8365_PIN_96_MSDC0_DAT4__FUNC_MSDC0_DAT4>,
+ <MT8365_PIN_95_MSDC0_DAT5__FUNC_MSDC0_DAT5>,
+ <MT8365_PIN_94_MSDC0_DAT6__FUNC_MSDC0_DAT6>,
+ <MT8365_PIN_93_MSDC0_DAT7__FUNC_MSDC0_DAT7>,
+ <MT8365_PIN_98_MSDC0_CMD__FUNC_MSDC0_CMD>;
+ input-enable;
+ bias-pull-up;
+ };
+
+ pins-rst {
+ pinmux = <MT8365_PIN_97_MSDC0_RSTB__FUNC_MSDC0_RSTB>;
+ bias-pull-up;
+ };
+ };
+
+ mmc0_pins_uhs: mmc0-uhs-pins {
+ pins-clk {
+ pinmux = <MT8365_PIN_99_MSDC0_CLK__FUNC_MSDC0_CLK>;
+ drive-strength = <MTK_DRIVE_10mA>;
+ bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+ };
+
+ pins-cmd-dat {
+ pinmux = <MT8365_PIN_103_MSDC0_DAT0__FUNC_MSDC0_DAT0>,
+ <MT8365_PIN_102_MSDC0_DAT1__FUNC_MSDC0_DAT1>,
+ <MT8365_PIN_101_MSDC0_DAT2__FUNC_MSDC0_DAT2>,
+ <MT8365_PIN_100_MSDC0_DAT3__FUNC_MSDC0_DAT3>,
+ <MT8365_PIN_96_MSDC0_DAT4__FUNC_MSDC0_DAT4>,
+ <MT8365_PIN_95_MSDC0_DAT5__FUNC_MSDC0_DAT5>,
+ <MT8365_PIN_94_MSDC0_DAT6__FUNC_MSDC0_DAT6>,
+ <MT8365_PIN_93_MSDC0_DAT7__FUNC_MSDC0_DAT7>,
+ <MT8365_PIN_98_MSDC0_CMD__FUNC_MSDC0_CMD>;
+ input-enable;
+ drive-strength = <MTK_DRIVE_10mA>;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+ };
+
+ pins-ds {
+ pinmux = <MT8365_PIN_104_MSDC0_DSL__FUNC_MSDC0_DSL>;
+ drive-strength = <MTK_DRIVE_10mA>;
+ bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+ };
+
+ pins-rst {
+ pinmux = <MT8365_PIN_97_MSDC0_RSTB__FUNC_MSDC0_RSTB>;
+ drive-strength = <MTK_DRIVE_10mA>;
+ bias-pull-up;
+ };
+ };
+
+ mmc1_pins_default: mmc1-default-pins {
+ pins-cd {
+ pinmux = <MT8365_PIN_76_CMDAT8__FUNC_GPIO76>;
+ bias-pull-up;
+ };
+
+ pins-clk {
+ pinmux = <MT8365_PIN_88_MSDC1_CLK__FUNC_MSDC1_CLK>;
+ bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+ };
+
+ pins-cmd-dat {
+ pinmux = <MT8365_PIN_89_MSDC1_DAT0__FUNC_MSDC1_DAT0>,
+ <MT8365_PIN_90_MSDC1_DAT1__FUNC_MSDC1_DAT1>,
+ <MT8365_PIN_91_MSDC1_DAT2__FUNC_MSDC1_DAT2>,
+ <MT8365_PIN_92_MSDC1_DAT3__FUNC_MSDC1_DAT3>,
+ <MT8365_PIN_87_MSDC1_CMD__FUNC_MSDC1_CMD>;
+ input-enable;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+ };
+ };
+
+ mmc1_pins_uhs: mmc1-uhs-pins {
+ pins-clk {
+ pinmux = <MT8365_PIN_88_MSDC1_CLK__FUNC_MSDC1_CLK>;
+ drive-strength = <MTK_DRIVE_8mA>;
+ bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
+ };
+
+ pins-cmd-dat {
+ pinmux = <MT8365_PIN_89_MSDC1_DAT0__FUNC_MSDC1_DAT0>,
+ <MT8365_PIN_90_MSDC1_DAT1__FUNC_MSDC1_DAT1>,
+ <MT8365_PIN_91_MSDC1_DAT2__FUNC_MSDC1_DAT2>,
+ <MT8365_PIN_92_MSDC1_DAT3__FUNC_MSDC1_DAT3>,
+ <MT8365_PIN_87_MSDC1_CMD__FUNC_MSDC1_CMD>;
+ input-enable;
+ drive-strength = <MTK_DRIVE_6mA>;
+ bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
+ };
+ };
+
+ uart0_pins: uart0-pins {
+ pins {
+ pinmux = <MT8365_PIN_35_URXD0__FUNC_URXD0>,
+ <MT8365_PIN_36_UTXD0__FUNC_UTXD0>;
+ };
+ };
+
+ uart1_pins: uart1-pins {
+ pins {
+ pinmux = <MT8365_PIN_37_URXD1__FUNC_URXD1>,
+ <MT8365_PIN_38_UTXD1__FUNC_UTXD1>;
+ };
+ };
+
+ uart2_pins: uart2-pins {
+ pins {
+ pinmux = <MT8365_PIN_39_URXD2__FUNC_URXD2>,
+ <MT8365_PIN_40_UTXD2__FUNC_UTXD2>;
+ };
+ };
+
+ usb_pins: usb-pins {
+ pins-id {
+ pinmux = <MT8365_PIN_17_GPIO17__FUNC_GPIO17>;
+ input-enable;
+ bias-pull-up;
+ };
+
+ pins-usb0-vbus {
+ pinmux = <MT8365_PIN_16_GPIO16__FUNC_USB_DRVVBUS>;
+ output-high;
+ };
+
+ pin-usb1-vbus {
+ pinmux = <MT8365_PIN_18_GPIO18__FUNC_GPIO18>;
+ output-high;
+ };
+ };
+
+ pwm_pins: pwm-pins {
+ pins {
+ pinmux = <MT8365_PIN_19_DISP_PWM__FUNC_PWM_A>,
+ <MT8365_PIN_116_I2S_BCK__FUNC_PWM_C>;
+ };
+ };
+};
+
+&pwm {
+ pinctrl-0 = <&pwm_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&uart0 {
+ pinctrl-0 = <&uart0_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&uart1 {
+ pinctrl-0 = <&uart1_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
+
+&uart2 {
+ pinctrl-0 = <&uart2_pins>;
+ pinctrl-names = "default";
+ status = "okay";
+};
diff --git a/arch/arm64/boot/dts/mediatek/mt8365.dtsi b/arch/arm64/boot/dts/mediatek/mt8365.dtsi
new file mode 100644
index 0000000000000..1cf2172081b20
--- /dev/null
+++ b/arch/arm64/boot/dts/mediatek/mt8365.dtsi
@@ -0,0 +1,601 @@
+// SPDX-License-Identifier: (GPL-2.0 OR MIT)
+/*
+ * (C) 2018 MediaTek Inc.
+ * Copyright (C) 2022 BayLibre SAS
+ * Fabien Parent <[email protected]>
+ * Bernhard Rosenkränzer <[email protected]>
+ */
+#include <dt-bindings/clock/mediatek,mt8365-clk.h>
+#include <dt-bindings/interrupt-controller/arm-gic.h>
+#include <dt-bindings/interrupt-controller/irq.h>
+#include <dt-bindings/phy/phy.h>
+#include <dt-bindings/thermal/thermal.h>
+
+/ {
+ compatible = "mediatek,mt8365";
+ interrupt-parent = <&sysirq>;
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ cpus: cpus {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ cpu-map {
+ cluster0: cluster0 {
+ core0 {
+ cpu = <&cpu0>;
+ };
+ core1 {
+ cpu = <&cpu1>;
+ };
+ core2 {
+ cpu = <&cpu2>;
+ };
+ core3 {
+ cpu = <&cpu3>;
+ };
+ };
+ };
+
+ cpu0: cpu@0 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x0>;
+ #cooling-cells = <2>;
+ enable-method = "psci";
+ };
+
+ cpu1: cpu@1 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x1>;
+ #cooling-cells = <2>;
+ enable-method = "psci";
+ };
+
+ cpu2: cpu@2 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x2>;
+ #cooling-cells = <2>;
+ enable-method = "psci";
+ };
+
+ cpu3: cpu@3 {
+ device_type = "cpu";
+ compatible = "arm,cortex-a53";
+ reg = <0x3>;
+ #cooling-cells = <2>;
+ enable-method = "psci";
+ };
+ };
+
+ clk26m: oscillator {
+ compatible = "fixed-clock";
+ #clock-cells = <0>;
+ clock-frequency = <26000000>;
+ clock-output-names = "clk26m";
+ };
+
+ psci {
+ compatible = "arm,psci-1.0";
+ method = "smc";
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ /* 128 KiB reserved for ARM Trusted Firmware (BL31) */
+ bl31_secmon_reserved: secmon@43000000 {
+ no-map;
+ reg = <0 0x43000000 0 0x20000>;
+ };
+ };
+
+ soc {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ compatible = "simple-bus";
+ ranges;
+
+ gic: interrupt-controller@c000000 {
+ compatible = "arm,gic-v3";
+ #interrupt-cells = <4>;
+ interrupt-parent = <&gic>;
+ interrupt-controller;
+ reg = <0 0x0c000000 0 0x80000>,
+ <0 0x0c080000 0 0x80000>;
+
+ interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>;
+ };
+
+ topckgen: syscon@10000000 {
+ compatible = "mediatek,mt8365-topckgen", "syscon";
+ reg = <0 0x10000000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ infracfg: syscon@10001000 {
+ compatible = "mediatek,mt8365-infracfg", "syscon";
+ reg = <0 0x10001000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ pericfg: syscon@10003000 {
+ compatible = "mediatek,mt8365-pericfg", "syscon";
+ reg = <0 0x10003000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ syscfg_pctl: syscfg-pctl@10005000 {
+ compatible = "mediatek,mt8365-syscfg", "syscon";
+ reg = <0 0x10005000 0 0x1000>;
+ };
+
+ watchdog: watchdog@10007000 {
+ compatible = "mediatek,mt8365-wdt",
+ "mediatek,mt6589-wdt";
+ reg = <0 0x10007000 0 0x100>;
+ #reset-cells = <1>;
+ };
+
+ gpt: apxgpt@10008000 {
+ compatible = "mediatek,mt8365-timer",
+ "mediatek,mt6577-timer";
+ reg = <0 0x10008000 0 0x1000>;
+ interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&topckgen CLK_TOP_SYS_26M_D2>;
+ clock-names = "clk13m";
+ };
+
+ pio: pinctrl@1000b000 {
+ compatible = "mediatek,mt8365-pinctrl";
+ reg = <0 0x1000b000 0 0x1000>;
+ mediatek,pctl-regmap = <&syscfg_pctl>;
+ pins-are-numbered;
+ gpio-controller;
+ #gpio-cells = <2>;
+ interrupt-controller;
+ #interrupt-cells = <2>;
+ interrupts = <GIC_SPI 115 IRQ_TYPE_LEVEL_HIGH>;
+ };
+
+ apmixedsys: syscon@1000c000 {
+ compatible = "mediatek,mt8365-apmixedsys", "syscon";
+ reg = <0 0x1000c000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ pwrap: pwrap@1000d000 {
+ compatible = "mediatek,mt8365-pwrap";
+ reg = <0 0x1000d000 0 0x1000>;
+ reg-names = "pwrap";
+ interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&infracfg CLK_IFR_PWRAP_SPI>,
+ <&infracfg CLK_IFR_PMIC_AP>,
+ <&infracfg CLK_IFR_PWRAP_SYS>,
+ <&infracfg CLK_IFR_PWRAP_TMR>;
+ clock-names = "spi", "wrap", "sys", "tmr";
+ };
+
+ keypad: keypad@10010000 {
+ compatible = "mediatek,mt6779-keypad";
+ reg = <0 0x10010000 0 0x1000>;
+ wakeup-source;
+ interrupts = <GIC_SPI 124 IRQ_TYPE_EDGE_FALLING>;
+ clocks = <&clk26m>;
+ clock-names = "kpd";
+ status = "disabled";
+ };
+
+ mcucfg: syscon@10200000 {
+ compatible = "mediatek,mt8365-mcucfg", "syscon";
+ reg = <0 0x10200000 0 0x2000>;
+ #clock-cells = <1>;
+ };
+
+ sysirq: interrupt-controller@10200a80 {
+ compatible = "mediatek,mt8365-sysirq",
+ "mediatek,mt6577-sysirq";
+ interrupt-controller;
+ #interrupt-cells = <3>;
+ interrupt-parent = <&gic>;
+ reg = <0 0x10200a80 0 0x20>;
+ };
+
+ infracfg: infracfg@1020e000 {
+ compatible = "mediatek,mt8365-infracfg", "syscon";
+ reg = <0 0x1020e000 0 0x1000>;
+ };
+
+ rng: rng@1020f000 {
+ compatible = "mediatek,mt8365-rng",
+ "mediatek,mt7623-rng";
+ reg = <0 0x1020f000 0 0x100>;
+ clocks = <&infracfg CLK_IFR_TRNG>;
+ clock-names = "rng";
+ };
+
+ apdma: dma-controller@11000280 {
+ compatible = "mediatek,mt8365-uart-dma",
+ "mediatek,mt6577-uart-dma";
+ reg = <0 0x11000280 0 0x80>,
+ <0 0x11000300 0 0x80>,
+ <0 0x11000380 0 0x80>,
+ <0 0x11000400 0 0x80>,
+ <0 0x11000580 0 0x80>,
+ <0 0x11000600 0 0x80>;
+ interrupts = <GIC_SPI 45 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 46 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 47 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 48 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 51 IRQ_TYPE_LEVEL_LOW>,
+ <GIC_SPI 52 IRQ_TYPE_LEVEL_LOW>;
+ dma-requests = <6>;
+ clocks = <&infracfg CLK_IFR_AP_DMA>;
+ clock-names = "apdma";
+ #dma-cells = <1>;
+ };
+
+ auxadc: adc@11001000 {
+ compatible = "mediatek,mt8365-auxadc",
+ "mediatek,mt8173-auxadc";
+ reg = <0 0x11001000 0 0x1000>;
+ clocks = <&infracfg CLK_IFR_AUXADC>;
+ clock-names = "main";
+ #io-channel-cells = <1>;
+ };
+
+ uart0: serial@11002000 {
+ compatible = "mediatek,mt8365-uart",
+ "mediatek,mt6577-uart";
+ reg = <0 0x11002000 0 0x1000>;
+ interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&clk26m>, <&infracfg CLK_IFR_UART0>;
+ clock-names = "baud", "bus";
+ dmas = <&apdma 0>, <&apdma 1>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ uart1: serial@11003000 {
+ compatible = "mediatek,mt8365-uart",
+ "mediatek,mt6577-uart";
+ reg = <0 0x11003000 0 0x1000>;
+ interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&clk26m>, <&infracfg CLK_IFR_UART1>;
+ clock-names = "baud", "bus";
+ dmas = <&apdma 2>, <&apdma 3>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ uart2: serial@11004000 {
+ compatible = "mediatek,mt8365-uart",
+ "mediatek,mt6577-uart";
+ reg = <0 0x11004000 0 0x1000>;
+ interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&clk26m>, <&infracfg CLK_IFR_UART2>;
+ clock-names = "baud", "bus";
+ dmas = <&apdma 4>, <&apdma 5>;
+ dma-names = "tx", "rx";
+ status = "disabled";
+ };
+
+ pwm: pwm@11006000 {
+ compatible = "mediatek,mt8365-pwm";
+ reg = <0 0x11006000 0 0x1000>;
+ #pwm-cells = <2>;
+ interrupts = <GIC_SPI 76 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&infracfg CLK_IFR_PWM_HCLK>,
+ <&infracfg CLK_IFR_PWM>,
+ <&infracfg CLK_IFR_PWM1>,
+ <&infracfg CLK_IFR_PWM2>,
+ <&infracfg CLK_IFR_PWM3>;
+ clock-names = "top", "main", "pwm1", "pwm2", "pwm3";
+ };
+
+ i2c0: i2c@11007000 {
+ compatible = "mediatek,mt8365-i2c",
+ "mediatek,mt8168-i2c";
+ reg = <0 0x11007000 0 0xa0>,
+ <0 0x11000080 0 0x80>;
+ interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_LOW>;
+ clock-div = <1>;
+ clocks = <&infracfg CLK_IFR_I2C0_AXI>,
+ <&infracfg CLK_IFR_AP_DMA>;
+ clock-names = "main", "dma";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c1: i2c@11008000 {
+ compatible = "mediatek,mt8365-i2c",
+ "mediatek,mt8168-i2c";
+ reg = <0 0x11008000 0 0xa0>,
+ <0 0x11000100 0 0x80>;
+ interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_LOW>;
+ clock-div = <1>;
+ clocks = <&infracfg CLK_IFR_I2C1_AXI>,
+ <&infracfg CLK_IFR_AP_DMA>;
+ clock-names = "main", "dma";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ i2c2: i2c@11009000 {
+ compatible = "mediatek,mt8365-i2c",
+ "mediatek,mt8168-i2c";
+ reg = <0 0x11009000 0 0xa0>,
+ <0 0x11000180 0 0x80>;
+ interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_LOW>;
+ clock-div = <1>;
+ clocks = <&infracfg CLK_IFR_I2C2_AXI>,
+ <&infracfg CLK_IFR_AP_DMA>;
+ clock-names = "main", "dma";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ spi: spi@1100a000 {
+ compatible = "mediatek,mt8365-spi",
+ "mediatek,mt7622-spi";
+ reg = <0 0x1100a000 0 0x100>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+ interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&topckgen CLK_TOP_UNIVPLL2_D4>,
+ <&topckgen CLK_TOP_SPI_SEL>,
+ <&infracfg CLK_IFR_SPI0>;
+ clock-names = "parent-clk", "sel-clk", "spi-clk";
+ status = "disabled";
+ };
+
+ thermal: thermal@1100b000 {
+ compatible = "mediatek,mt8365-thermal";
+ reg = <0 0x1100b000 0 0x1000>;
+ interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&infracfg CLK_IFR_THERM>,
+ <&infracfg CLK_IFR_AUXADC>;
+ clock-names = "therm", "auxadc";
+ mediatek,auxadc = <&auxadc>;
+ mediatek,apmixedsys = <&apmixedsys>;
+ nvmem-cells = <&thermal_calibration>;
+ nvmem-cell-names = "calibration-data";
+ #thermal-sensor-cells = <1>;
+ };
+
+ i2c3: i2c@1100f000 {
+ compatible = "mediatek,mt8365-i2c",
+ "mediatek,mt8168-i2c";
+ reg = <0 0x1100f000 0 0xa0>,
+ <0 0x11000200 0 0x80>;
+ interrupts = <GIC_SPI 31 IRQ_TYPE_LEVEL_LOW>;
+ clock-div = <1>;
+ clocks = <&infracfg CLK_IFR_I2C3_AXI>,
+ <&infracfg CLK_IFR_AP_DMA>;
+ clock-names = "main", "dma";
+ #address-cells = <1>;
+ #size-cells = <0>;
+ status = "disabled";
+ };
+
+ ssusb: usb@11201000 {
+ compatible = "mediatek,mt8365-mtu3", "mediatek,mtu3";
+ reg = <0 0x11201000 0 0x2e00>,
+ <0 0x11203e00 0 0x0100>;
+ reg-names = "mac", "ippc";
+ interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_LOW>;
+ phys = <&u2port0 PHY_TYPE_USB2>,
+ <&u2port1 PHY_TYPE_USB2>;
+ clocks = <&topckgen CLK_TOP_SSUSB_TOP_CK_EN>,
+ <&infracfg CLK_IFR_SSUSB_REF>,
+ <&infracfg CLK_IFR_SSUSB_SYS>,
+ <&infracfg CLK_IFR_ICUSB>;
+ clock-names = "sys_ck", "ref_ck", "mcu_ck",
+ "dma_ck";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ status = "disabled";
+
+ usb_host: usb@11200000 {
+ compatible = "mediatek,mt8365-xhci",
+ "mediatek,mtk-xhci";
+ reg = <0 0x11200000 0 0x1000>;
+ reg-names = "mac";
+ interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&topckgen CLK_TOP_SSUSB_TOP_CK_EN>,
+ <&infracfg CLK_IFR_SSUSB_REF>,
+ <&infracfg CLK_IFR_SSUSB_SYS>,
+ <&infracfg CLK_IFR_ICUSB>,
+ <&infracfg CLK_IFR_SSUSB_XHCI>;
+ clock-names = "sys_ck", "ref_ck", "mcu_ck",
+ "dma_ck", "xhci_ck";
+ status = "disabled";
+ };
+ };
+
+ mmc0: mmc@11230000 {
+ compatible = "mediatek,mt8365-mmc", "mediatek,mt8183-mmc";
+ reg = <0 0x11230000 0 0x1000>,
+ <0 0x11cd0000 0 0x1000>;
+ interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&topckgen CLK_TOP_MSDC50_0_SEL>,
+ <&infracfg CLK_IFR_MSDC0_HCLK>,
+ <&infracfg CLK_IFR_MSDC0_SRC>;
+ clock-names = "source", "hclk", "source_cg";
+ status = "disabled";
+ };
+
+ mmc1: mmc@11240000 {
+ compatible = "mediatek,mt8365-mmc", "mediatek,mt8183-mmc";
+ reg = <0 0x11240000 0 0x1000>,
+ <0 0x11c90000 0 0x1000>;
+ interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_LOW>;
+ clocks = <&topckgen CLK_TOP_MSDC30_1_SEL>,
+ <&infracfg CLK_IFR_MSDC1_HCLK>,
+ <&infracfg CLK_IFR_MSDC1_SRC>;
+ clock-names = "source", "hclk", "source_cg";
+ status = "disabled";
+ };
+
+ ethernet: ethernet@112a0000 {
+ compatible = "mediatek,mt8365-eth";
+ reg = <0 0x112a0000 0 0x1000>;
+ mediatek,pericfg = <&infracfg>;
+ interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&topckgen CLK_TOP_ETH_SEL>,
+ <&infracfg CLK_IFR_NIC_AXI>,
+ <&infracfg CLK_IFR_NIC_SLV_AXI>;
+ clock-names = "core", "reg", "trans";
+ status = "disabled";
+ };
+
+ mipi_tx0: dsi-phy@11c00000 {
+ compatible = "mediatek,mt8365-mipi-tx",
+ "mediatek,mt8183-mipi-tx";
+ reg = <0 0x11c00000 0 0x800>;
+ clocks = <&clk26m>;
+ clock-names = "ref_clk";
+ #clock-cells = <0>;
+ #phy-cells = <0>;
+ clock-output-names = "mipi_tx0_pll";
+ };
+
+ efuse: efuse@11c50000 {
+ compatible = "mediatek,mt8365-efuse", "mediatek,efuse";
+ reg = <0 0x11c50000 0 0x1000>;
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ thermal_calibration: calib@180 {
+ reg = <0x180 0xc>;
+ };
+ };
+
+ u3phy: t-phy@11cc0000 {
+ compatible = "mediatek,mt8365-tphy",
+ "mediatek,generic-tphy-v2";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ #phy-cells = <1>;
+ ranges;
+
+ u2port0: usb-phy@11cc0000 {
+ reg = <0 0x11cc0000 0 0x400>;
+ clocks = <&topckgen CLK_TOP_SSUSB_PHY_CK_EN>,
+ <&topckgen CLK_TOP_USB20_48M_EN>;
+ clock-names = "ref", "da_ref";
+ #phy-cells = <1>;
+ };
+
+ u2port1: usb-phy@11cc1000 {
+ reg = <0 0x11cc1000 0 0x400>;
+ clocks = <&topckgen CLK_TOP_SSUSB_PHY_CK_EN>,
+ <&topckgen CLK_TOP_USB20_48M_EN>;
+ clock-names = "ref", "da_ref";
+ #phy-cells = <1>;
+ };
+ };
+
+ mfgcfg: syscon@13000000 {
+ compatible = "mediatek,mt8365-mfgcfg", "syscon";
+ reg = <0 0x13000000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ mmsys: syscon@14000000 {
+ compatible = "mediatek,mt8365-mmsys", "syscon";
+ reg = <0 0x14000000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ camsys: syscon@15000000 {
+ compatible = "mediatek,mt8365-imgsys", "syscon";
+ reg = <0 0x15000000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ vdecsys: syscon@16000000 {
+ compatible = "mediatek,mt8365-vdecsys", "syscon";
+ reg = <0 0x16000000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ vencsys: syscon@17000000 {
+ compatible = "mediatek,mt8365-vencsys", "syscon";
+ reg = <0 0x17000000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+
+ apu: syscon@19020000 {
+ compatible = "mediatek,mt8365-apu", "syscon";
+ reg = <0 0x19020000 0 0x1000>;
+ #clock-cells = <1>;
+ };
+ };
+
+ thermal-zones {
+ cpu_thermal: cpu-thermal {
+ polling-delay-passive = <1000>; /* milliseconds */
+ polling-delay = <1000>; /* milliseconds */
+ thermal-sensors = <&thermal 0>;
+
+ trips {
+ threshold: trip-point0 {
+ temperature = <95000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ target: trip-point1 {
+ temperature = <105000>;
+ hysteresis = <2000>;
+ type = "passive";
+ };
+
+ cpu_crit: cpu_crit0 {
+ temperature = <117000>;
+ hysteresis = <2000>;
+ type = "critical";
+ };
+ };
+
+ cooling-maps {
+ map0 {
+ trip = <&target>;
+ cooling-device =
+ <&cpu0
+ THERMAL_NO_LIMIT
+ THERMAL_NO_LIMIT>,
+ <&cpu1
+ THERMAL_NO_LIMIT
+ THERMAL_NO_LIMIT>,
+ <&cpu2
+ THERMAL_NO_LIMIT
+ THERMAL_NO_LIMIT>,
+ <&cpu3
+ THERMAL_NO_LIMIT
+ THERMAL_NO_LIMIT>;
+ contribution = <100>;
+ };
+ };
+ };
+ };
+
+ timer {
+ compatible = "arm,armv8-timer";
+ interrupt-parent = <&gic>;
+ interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW 0>,
+ <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW 0>,
+ <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW 0>,
+ <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW 0>;
+ };
+};
--
2.38.1
Add binding documentation of mediatek,sysirq for mt8365 SoC.
Signed-off-by: Bernhard Rosenkränzer <[email protected]>
---
.../devicetree/bindings/interrupt-controller/mediatek,sysirq.txt | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/interrupt-controller/mediatek,sysirq.txt b/Documentation/devicetree/bindings/interrupt-controller/mediatek,sysirq.txt
index 84ced3f4179b9..3ffc60184e445 100644
--- a/Documentation/devicetree/bindings/interrupt-controller/mediatek,sysirq.txt
+++ b/Documentation/devicetree/bindings/interrupt-controller/mediatek,sysirq.txt
@@ -25,6 +25,7 @@ Required properties:
"mediatek,mt6577-sysirq": for MT6577
"mediatek,mt2712-sysirq", "mediatek,mt6577-sysirq": for MT2712
"mediatek,mt2701-sysirq", "mediatek,mt6577-sysirq": for MT2701
+ "mediatek,mt8365-sysirq", "mediatek,mt6577-sysirq": for MT8365
- interrupt-controller : Identifies the node as an interrupt controller
- #interrupt-cells : Use the same format as specified by GIC in arm,gic.txt.
- reg: Physical base address of the intpol registers and length of memory
--
2.38.1
From: Fabien Parent <[email protected]>
Add binding documentation for the MT8365 SoC.
Signed-off-by: Fabien Parent <[email protected]>
---
Documentation/devicetree/bindings/watchdog/mtk-wdt.txt | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt b/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt
index 762c62e428ef2..835af28b46de0 100644
--- a/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt
+++ b/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt
@@ -20,6 +20,7 @@ Required properties:
"mediatek,mt8516-wdt", "mediatek,mt6589-wdt": for MT8516
"mediatek,mt8192-wdt": for MT8192
"mediatek,mt8195-wdt", "mediatek,mt6589-wdt": for MT8195
+ "mediatek,mt8365-wdt", "mediatek,mt6589-wdt": for MT8365
- reg : Specifies base physical address and size of the registers.
--
2.38.1
Add bindings for the Mediatek mt8365-evk board.
Signed-off-by: Bernhard Rosenkränzer <[email protected]>
---
Documentation/devicetree/bindings/arm/mediatek.yaml | 4 ++++
1 file changed, 4 insertions(+)
diff --git a/Documentation/devicetree/bindings/arm/mediatek.yaml b/Documentation/devicetree/bindings/arm/mediatek.yaml
index d76ce4c3819db..6781fcdb9fe69 100644
--- a/Documentation/devicetree/bindings/arm/mediatek.yaml
+++ b/Documentation/devicetree/bindings/arm/mediatek.yaml
@@ -246,6 +246,10 @@ properties:
- enum:
- mediatek,mt8516-pumpkin
- const: mediatek,mt8516
+ - items:
+ - enum:
+ - mediatek,mt8365-evk
+ - const: mediatek, mt8365
additionalProperties: true
--
2.38.1
Add dt-binding documentation of timer for Mediatek MT8365 SoC
platform.
Signed-off-by: Bernhard Rosenkränzer <[email protected]>
---
Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt b/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt
index 8bbb6e94508b2..c1f40aca2d48c 100644
--- a/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt
+++ b/Documentation/devicetree/bindings/timer/mediatek,mtk-timer.txt
@@ -20,6 +20,7 @@ Required properties:
* "mediatek,mt8135-timer" for MT8135 compatible timers (GPT)
* "mediatek,mt8173-timer" for MT8173 compatible timers (GPT)
* "mediatek,mt8516-timer" for MT8516 compatible timers (GPT)
+ * "mediatek,mt8365-timer" for MT8365 compatible timers (GPT)
* "mediatek,mt6577-timer" for MT6577 and all above compatible timers (GPT)
For those SoCs that use SYST
--
2.38.1
Add binding documentation for the Mediatek MT8365 SoC.
Signed-off-by: Bernhard Rosenkränzer <[email protected]>
---
Documentation/devicetree/bindings/thermal/mediatek-thermal.txt | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/thermal/mediatek-thermal.txt b/Documentation/devicetree/bindings/thermal/mediatek-thermal.txt
index 5c7e7bdd029ab..d1b30733dfce3 100644
--- a/Documentation/devicetree/bindings/thermal/mediatek-thermal.txt
+++ b/Documentation/devicetree/bindings/thermal/mediatek-thermal.txt
@@ -15,6 +15,7 @@ Required properties:
- "mediatek,mt7622-thermal" : For MT7622 SoC
- "mediatek,mt8183-thermal" : For MT8183 family of SoCs
- "mediatek,mt8516-thermal", "mediatek,mt2701-thermal : For MT8516 family of SoCs
+ - "mediatek,mt8365-thermal" : for MT8365 family of SoCs
- reg: Address range of the thermal controller
- interrupts: IRQ for the thermal controller
- clocks, clock-names: Clocks needed for the thermal controller. required
--
2.38.1
Il 15/11/22 03:54, Bernhard Rosenkränzer ha scritto:
> From: Fabien Parent <[email protected]>
>
> Add binding documentation for the MT8365 SoC.
>
> Signed-off-by: Fabien Parent <[email protected]>
Hello,
There's a mtk-wdt.txt schema conversion around that's well reviewed and that
will land before, if not at the same time, as your mt8365-evk series (judging
by the fact that you anyway have to send a v3...)
Can you please rebase this commit over [1]?
Thanks,
Angelo
[1]: https://patchwork.kernel.org/project/linux-mediatek/list/?series=693051
> ---
> Documentation/devicetree/bindings/watchdog/mtk-wdt.txt | 1 +
> 1 file changed, 1 insertion(+)
>
> diff --git a/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt b/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt
> index 762c62e428ef2..835af28b46de0 100644
> --- a/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt
> +++ b/Documentation/devicetree/bindings/watchdog/mtk-wdt.txt
> @@ -20,6 +20,7 @@ Required properties:
> "mediatek,mt8516-wdt", "mediatek,mt6589-wdt": for MT8516
> "mediatek,mt8192-wdt": for MT8192
> "mediatek,mt8195-wdt", "mediatek,mt6589-wdt": for MT8195
> + "mediatek,mt8365-wdt", "mediatek,mt6589-wdt": for MT8365
>
> - reg : Specifies base physical address and size of the registers.
>
On 15/11/2022 03:54, Bernhard Rosenkränzer wrote:
> From: Fabien Parent <[email protected]>
>
> Add binding documentation for the MT8365 SoC.
Drop second, redundant "bindings" from subject.
With that:
Acked-by: Krzysztof Kozlowski <[email protected]>
>
> Signed-off-by: Fabien Parent <[email protected]>
Best regards,
Krzysztof
On 15/11/2022 03:54, Bernhard Rosenkränzer wrote:
> From: Fabien Parent <[email protected]>
>
> This adds minimal support for the Mediatek 8365 SOC and the EVK reference
> board, allowing the board to boot to initramfs with serial port I/O.
>
> GPIO keys are supported, MMC is partially supported (needs the clocks
> driver for full support).
>
> Signed-off-by: Fabien Parent <[email protected]>
> [[email protected]: Removed parts depending on drivers that aren't upstream yet, cleanups]
> Signed-off-by: Bernhard Rosenkränzer <[email protected]>
> ---
> arch/arm64/boot/dts/mediatek/Makefile | 1 +
> arch/arm64/boot/dts/mediatek/mt8365-evk.dts | 344 +++++++++++
> arch/arm64/boot/dts/mediatek/mt8365.dtsi | 601 ++++++++++++++++++++
> 3 files changed, 946 insertions(+)
> create mode 100644 arch/arm64/boot/dts/mediatek/mt8365-evk.dts
> create mode 100644 arch/arm64/boot/dts/mediatek/mt8365.dtsi
>
> diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
> index 0ec90cb3ef289..e668fd50a3326 100644
> --- a/arch/arm64/boot/dts/mediatek/Makefile
> +++ b/arch/arm64/boot/dts/mediatek/Makefile
> @@ -46,4 +46,5 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-cherry-tomato-r2.dtb
> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-cherry-tomato-r3.dtb
> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-demo.dtb
> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-evb.dtb
> +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8365-evk.dtb
> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8516-pumpkin.dtb
> diff --git a/arch/arm64/boot/dts/mediatek/mt8365-evk.dts b/arch/arm64/boot/dts/mediatek/mt8365-evk.dts
> new file mode 100644
> index 0000000000000..74e0f75231637
> --- /dev/null
> +++ b/arch/arm64/boot/dts/mediatek/mt8365-evk.dts
> @@ -0,0 +1,344 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2021-2022 BayLibre, SAS.
> + * Authors:
> + * Fabien Parent <[email protected]>
> + * Bernhard Rosenkränzer <[email protected]>
> + */
> +
> +/dts-v1/;
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
> +#include <dt-bindings/pinctrl/mt8365-pinfunc.h>
> +#include "mt8365.dtsi"
> +
> +/ {
> + model = "MediaTek MT8365 Open Platform EVK";
> + compatible = "mediatek,mt8365-evk", "mediatek,mt8365";
Missing bindings.
> +
> + aliases {
> + serial0 = &uart0;
> + };
> +
> + chosen {
> + stdout-path = "serial0:921600n8";
> + };
> +
(...)
> +
> + soc {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + compatible = "simple-bus";
> + ranges;
> +
> + gic: interrupt-controller@c000000 {
> + compatible = "arm,gic-v3";
> + #interrupt-cells = <4>;
> + interrupt-parent = <&gic>;
> + interrupt-controller;
> + reg = <0 0x0c000000 0 0x80000>,
> + <0 0x0c080000 0 0x80000>;
> +
> + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>;
> + };
> +
> + topckgen: syscon@10000000 {
> + compatible = "mediatek,mt8365-topckgen", "syscon";
> + reg = <0 0x10000000 0 0x1000>;
> + #clock-cells = <1>;
> + };
> +
> + infracfg: syscon@10001000 {
> + compatible = "mediatek,mt8365-infracfg", "syscon";
Missing bindings.
Did you order your patches in logical order?
Best regards,
Krzysztof
On 15/11/2022 03:54, Bernhard Rosenkränzer wrote:
> Add devicetree bindings for Mediatek MT8365 pinctrl driver.
>
> Signed-off-by: Bernhard Rosenkränzer <[email protected]>
> ---
> .../pinctrl/mediatek,mt8365-pinctrl.yaml | 68 +++++++++++++++++++
> 1 file changed, 68 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/pinctrl/mediatek,mt8365-pinctrl.yaml
>
> diff --git a/Documentation/devicetree/bindings/pinctrl/mediatek,mt8365-pinctrl.yaml b/Documentation/devicetree/bindings/pinctrl/mediatek,mt8365-pinctrl.yaml
> new file mode 100644
> index 0000000000000..bddff8c2fd382
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/pinctrl/mediatek,mt8365-pinctrl.yaml
> @@ -0,0 +1,68 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/pinctrl/mediatek,mt8365-pinctrl.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Mediatek MT8365 Pin Controller
> +
> +maintainers:
> + - Bernhard Rosenkränzer <[email protected]>
> +
> +description: |+
I am not going to review this - please go through comments you received.
Best regards,
Krzysztof
On 15/11/2022 03:54, Bernhard Rosenkränzer wrote:
> Add dt-binding documentation of timer for Mediatek MT8365 SoC
> platform.
>
> Signed-off-by: Bernhard Rosenkränzer <[email protected]>
I am not going to review this - please go through comments you received.
Best regards,
Krzysztof
On 15/11/2022 03:54, Bernhard Rosenkränzer wrote:
> Add bindings for the Mediatek mt8365-evk board.
>
> Signed-off-by: Bernhard Rosenkränzer <[email protected]>
You document a patch after using a compatible - that's broken order.
> ---
> Documentation/devicetree/bindings/arm/mediatek.yaml | 4 ++++
> 1 file changed, 4 insertions(+)
>
> diff --git a/Documentation/devicetree/bindings/arm/mediatek.yaml b/Documentation/devicetree/bindings/arm/mediatek.yaml
> index d76ce4c3819db..6781fcdb9fe69 100644
> --- a/Documentation/devicetree/bindings/arm/mediatek.yaml
> +++ b/Documentation/devicetree/bindings/arm/mediatek.yaml
> @@ -246,6 +246,10 @@ properties:
> - enum:
> - mediatek,mt8516-pumpkin
> - const: mediatek,mt8516
> + - items:
> + - enum:
> + - mediatek,mt8365-evk
> + - const: mediatek, mt8365
No spaces in compatibles.
Best regards,
Krzysztof
Il 15/11/22 03:54, Bernhard Rosenkränzer ha scritto:
> From: Fabien Parent <[email protected]>
>
> This adds minimal support for the Mediatek 8365 SOC and the EVK reference
> board, allowing the board to boot to initramfs with serial port I/O.
>
> GPIO keys are supported, MMC is partially supported (needs the clocks
> driver for full support).
>
> Signed-off-by: Fabien Parent <[email protected]>
> [[email protected]: Removed parts depending on drivers that aren't upstream yet, cleanups]
> Signed-off-by: Bernhard Rosenkränzer <[email protected]>
> ---
> arch/arm64/boot/dts/mediatek/Makefile | 1 +
> arch/arm64/boot/dts/mediatek/mt8365-evk.dts | 344 +++++++++++
> arch/arm64/boot/dts/mediatek/mt8365.dtsi | 601 ++++++++++++++++++++
> 3 files changed, 946 insertions(+)
> create mode 100644 arch/arm64/boot/dts/mediatek/mt8365-evk.dts
> create mode 100644 arch/arm64/boot/dts/mediatek/mt8365.dtsi
>
> diff --git a/arch/arm64/boot/dts/mediatek/Makefile b/arch/arm64/boot/dts/mediatek/Makefile
> index 0ec90cb3ef289..e668fd50a3326 100644
> --- a/arch/arm64/boot/dts/mediatek/Makefile
> +++ b/arch/arm64/boot/dts/mediatek/Makefile
> @@ -46,4 +46,5 @@ dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-cherry-tomato-r2.dtb
> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-cherry-tomato-r3.dtb
> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-demo.dtb
> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8195-evb.dtb
> +dtb-$(CONFIG_ARCH_MEDIATEK) += mt8365-evk.dtb
> dtb-$(CONFIG_ARCH_MEDIATEK) += mt8516-pumpkin.dtb
> diff --git a/arch/arm64/boot/dts/mediatek/mt8365-evk.dts b/arch/arm64/boot/dts/mediatek/mt8365-evk.dts
> new file mode 100644
> index 0000000000000..74e0f75231637
> --- /dev/null
> +++ b/arch/arm64/boot/dts/mediatek/mt8365-evk.dts
> @@ -0,0 +1,344 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (c) 2021-2022 BayLibre, SAS.
> + * Authors:
> + * Fabien Parent <[email protected]>
> + * Bernhard Rosenkränzer <[email protected]>
> + */
> +
> +/dts-v1/;
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
> +#include <dt-bindings/pinctrl/mt8365-pinfunc.h>
> +#include "mt8365.dtsi"
> +
> +/ {
> + model = "MediaTek MT8365 Open Platform EVK";
> + compatible = "mediatek,mt8365-evk", "mediatek,mt8365";
> +
> + aliases {
> + serial0 = &uart0;
> + };
> +
> + chosen {
> + stdout-path = "serial0:921600n8";
> + };
> +
> + firmware {
> + optee {
> + compatible = "linaro,optee-tz";
> + method = "smc";
> + };
> + };
> +
> + gpio-keys {
> + compatible = "gpio-keys";
> + input-name = "gpio-keys";
> + pinctrl-names = "default";
> + pinctrl-0 = <&gpio_keys>;
> +
> + key-volume-up {
> + gpios = <&pio 24 GPIO_ACTIVE_LOW>;
> + label = "volume_up";
> + linux,code = <KEY_VOLUMEUP>;
> + wakeup-source;
> + debounce-interval = <15>;
> + };
> + };
> +
> + memory@40000000 {
> + device_type = "memory";
> + reg = <0 0x40000000 0 0xc0000000>;
> + };
> +
> + usb_otg_vbus: regulator-0 {
> + compatible = "regulator-fixed";
> + regulator-name = "otg_vbus";
> + regulator-min-microvolt = <5000000>;
> + regulator-max-microvolt = <5000000>;
> + gpio = <&pio 16 GPIO_ACTIVE_HIGH>;
> + enable-active-high;
> + };
> +
> + reserved-memory {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> + /* 12 MiB reserved for OP-TEE (BL32)
> + * +-----------------------+ 0x43e0_0000
> + * | SHMEM 2MiB |
> + * +-----------------------+ 0x43c0_0000
> + * | | TA_RAM 8MiB |
> + * + TZDRAM +--------------+ 0x4340_0000
> + * | | TEE_RAM 2MiB |
> + * +-----------------------+ 0x4320_0000
> + */
> + optee_reserved: optee@43200000 {
> + no-map;
> + reg = <0 0x43200000 0 0x00c00000>;
> + };
> + };
> +};
> +
> +&i2c1 {
> + pinctrl-names = "default";
> + pinctrl-0 = <&i2c1_pins>;
> + clock-frequency = <100000>;
> + status = "okay";
> +};
> +
> +&pio {
> + dpi_func_pins: dpi-func-pins {
> + pins {
> + pinmux = <MT8365_PIN_0_GPIO0__FUNC_DPI_D0>,
> + <MT8365_PIN_1_GPIO1__FUNC_DPI_D1>,
> + <MT8365_PIN_2_GPIO2__FUNC_DPI_D2>,
> + <MT8365_PIN_3_GPIO3__FUNC_DPI_D3>,
> + <MT8365_PIN_4_GPIO4__FUNC_DPI_D4>,
> + <MT8365_PIN_5_GPIO5__FUNC_DPI_D5>,
> + <MT8365_PIN_6_GPIO6__FUNC_DPI_D6>,
> + <MT8365_PIN_7_GPIO7__FUNC_DPI_D7>,
> + <MT8365_PIN_8_GPIO8__FUNC_DPI_D8>,
> + <MT8365_PIN_9_GPIO9__FUNC_DPI_D9>,
> + <MT8365_PIN_10_GPIO10__FUNC_DPI_D10>,
> + <MT8365_PIN_11_GPIO11__FUNC_DPI_D11>,
> + <MT8365_PIN_12_GPIO12__FUNC_DPI_DE>,
> + <MT8365_PIN_13_GPIO13__FUNC_DPI_VSYNC>,
> + <MT8365_PIN_14_GPIO14__FUNC_DPI_CK>,
> + <MT8365_PIN_15_GPIO15__FUNC_DPI_HSYNC>;
> + drive-strength = <MTK_DRIVE_4mA>;
> + };
> + };
> +
> + dpi_idle_pins: dpi-idle-pins {
> + pins {
> + pinmux = <MT8365_PIN_0_GPIO0__FUNC_GPIO0>,
> + <MT8365_PIN_1_GPIO1__FUNC_GPIO1>,
> + <MT8365_PIN_2_GPIO2__FUNC_GPIO2>,
> + <MT8365_PIN_3_GPIO3__FUNC_GPIO3>,
> + <MT8365_PIN_4_GPIO4__FUNC_GPIO4>,
> + <MT8365_PIN_5_GPIO5__FUNC_GPIO5>,
> + <MT8365_PIN_6_GPIO6__FUNC_GPIO6>,
> + <MT8365_PIN_7_GPIO7__FUNC_GPIO7>,
> + <MT8365_PIN_8_GPIO8__FUNC_GPIO8>,
> + <MT8365_PIN_9_GPIO9__FUNC_GPIO9>,
> + <MT8365_PIN_10_GPIO10__FUNC_GPIO10>,
> + <MT8365_PIN_11_GPIO11__FUNC_GPIO11>,
> + <MT8365_PIN_12_GPIO12__FUNC_GPIO12>,
> + <MT8365_PIN_13_GPIO13__FUNC_GPIO13>,
> + <MT8365_PIN_14_GPIO14__FUNC_GPIO14>,
> + <MT8365_PIN_15_GPIO15__FUNC_GPIO15>;
> + };
> + };
> +
> + gpio_keys: gpio-keys-pins {
> + pins {
> + pinmux = <MT8365_PIN_24_KPCOL0__FUNC_KPCOL0>;
> + bias-pull-up;
> + input-enable;
> + };
> + };
> +
> + i2c1_pins: i2c1-pins {
> + pins {
> + pinmux = <MT8365_PIN_59_SDA1__FUNC_SDA1_0>,
> + <MT8365_PIN_60_SCL1__FUNC_SCL1_0>;
> + mediatek,pull-up-adv = <3>;
> + mediatek,drive-strength-adv = <00>;
> + bias-pull-up;
> + };
> + };
> +
> + ite_pins: ite-pins {
> + pins-rst-ite {
> + pinmux = <MT8365_PIN_69_CMDAT1__FUNC_GPIO69>;
> + output-high;
> + };
> +
> + pins-irq-ite {
> + pinmux = <MT8365_PIN_68_CMDAT0__FUNC_GPIO68>;
> + input-enable;
> + bias-pull-up;
> + };
> +
> + pins-pwr {
> + pinmux = <MT8365_PIN_70_CMDAT2__FUNC_GPIO70>,
> + <MT8365_PIN_71_CMDAT3__FUNC_GPIO71>;
> + output-high;
> + };
> + };
> +
> + mmc0_pins_default: mmc0-default-pins {
> + pins-clk {
> + pinmux = <MT8365_PIN_99_MSDC0_CLK__FUNC_MSDC0_CLK>;
> + bias-pull-down;
> + };
> +
> + pins-cmd-dat {
> + pinmux = <MT8365_PIN_103_MSDC0_DAT0__FUNC_MSDC0_DAT0>,
> + <MT8365_PIN_102_MSDC0_DAT1__FUNC_MSDC0_DAT1>,
> + <MT8365_PIN_101_MSDC0_DAT2__FUNC_MSDC0_DAT2>,
> + <MT8365_PIN_100_MSDC0_DAT3__FUNC_MSDC0_DAT3>,
> + <MT8365_PIN_96_MSDC0_DAT4__FUNC_MSDC0_DAT4>,
> + <MT8365_PIN_95_MSDC0_DAT5__FUNC_MSDC0_DAT5>,
> + <MT8365_PIN_94_MSDC0_DAT6__FUNC_MSDC0_DAT6>,
> + <MT8365_PIN_93_MSDC0_DAT7__FUNC_MSDC0_DAT7>,
> + <MT8365_PIN_98_MSDC0_CMD__FUNC_MSDC0_CMD>;
> + input-enable;
> + bias-pull-up;
> + };
> +
> + pins-rst {
> + pinmux = <MT8365_PIN_97_MSDC0_RSTB__FUNC_MSDC0_RSTB>;
> + bias-pull-up;
> + };
> + };
> +
> + mmc0_pins_uhs: mmc0-uhs-pins {
> + pins-clk {
> + pinmux = <MT8365_PIN_99_MSDC0_CLK__FUNC_MSDC0_CLK>;
> + drive-strength = <MTK_DRIVE_10mA>;
> + bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
> + };
> +
> + pins-cmd-dat {
> + pinmux = <MT8365_PIN_103_MSDC0_DAT0__FUNC_MSDC0_DAT0>,
> + <MT8365_PIN_102_MSDC0_DAT1__FUNC_MSDC0_DAT1>,
> + <MT8365_PIN_101_MSDC0_DAT2__FUNC_MSDC0_DAT2>,
> + <MT8365_PIN_100_MSDC0_DAT3__FUNC_MSDC0_DAT3>,
> + <MT8365_PIN_96_MSDC0_DAT4__FUNC_MSDC0_DAT4>,
> + <MT8365_PIN_95_MSDC0_DAT5__FUNC_MSDC0_DAT5>,
> + <MT8365_PIN_94_MSDC0_DAT6__FUNC_MSDC0_DAT6>,
> + <MT8365_PIN_93_MSDC0_DAT7__FUNC_MSDC0_DAT7>,
> + <MT8365_PIN_98_MSDC0_CMD__FUNC_MSDC0_CMD>;
> + input-enable;
> + drive-strength = <MTK_DRIVE_10mA>;
> + bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
> + };
> +
> + pins-ds {
> + pinmux = <MT8365_PIN_104_MSDC0_DSL__FUNC_MSDC0_DSL>;
> + drive-strength = <MTK_DRIVE_10mA>;
> + bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
> + };
> +
> + pins-rst {
> + pinmux = <MT8365_PIN_97_MSDC0_RSTB__FUNC_MSDC0_RSTB>;
> + drive-strength = <MTK_DRIVE_10mA>;
> + bias-pull-up;
> + };
> + };
> +
> + mmc1_pins_default: mmc1-default-pins {
> + pins-cd {
> + pinmux = <MT8365_PIN_76_CMDAT8__FUNC_GPIO76>;
> + bias-pull-up;
> + };
> +
> + pins-clk {
> + pinmux = <MT8365_PIN_88_MSDC1_CLK__FUNC_MSDC1_CLK>;
> + bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
> + };
> +
> + pins-cmd-dat {
> + pinmux = <MT8365_PIN_89_MSDC1_DAT0__FUNC_MSDC1_DAT0>,
> + <MT8365_PIN_90_MSDC1_DAT1__FUNC_MSDC1_DAT1>,
> + <MT8365_PIN_91_MSDC1_DAT2__FUNC_MSDC1_DAT2>,
> + <MT8365_PIN_92_MSDC1_DAT3__FUNC_MSDC1_DAT3>,
> + <MT8365_PIN_87_MSDC1_CMD__FUNC_MSDC1_CMD>;
> + input-enable;
> + bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
> + };
> + };
> +
> + mmc1_pins_uhs: mmc1-uhs-pins {
> + pins-clk {
> + pinmux = <MT8365_PIN_88_MSDC1_CLK__FUNC_MSDC1_CLK>;
> + drive-strength = <MTK_DRIVE_8mA>;
> + bias-pull-down = <MTK_PUPD_SET_R1R0_10>;
> + };
> +
> + pins-cmd-dat {
> + pinmux = <MT8365_PIN_89_MSDC1_DAT0__FUNC_MSDC1_DAT0>,
> + <MT8365_PIN_90_MSDC1_DAT1__FUNC_MSDC1_DAT1>,
> + <MT8365_PIN_91_MSDC1_DAT2__FUNC_MSDC1_DAT2>,
> + <MT8365_PIN_92_MSDC1_DAT3__FUNC_MSDC1_DAT3>,
> + <MT8365_PIN_87_MSDC1_CMD__FUNC_MSDC1_CMD>;
> + input-enable;
> + drive-strength = <MTK_DRIVE_6mA>;
> + bias-pull-up = <MTK_PUPD_SET_R1R0_01>;
> + };
> + };
> +
> + uart0_pins: uart0-pins {
> + pins {
> + pinmux = <MT8365_PIN_35_URXD0__FUNC_URXD0>,
> + <MT8365_PIN_36_UTXD0__FUNC_UTXD0>;
> + };
> + };
> +
> + uart1_pins: uart1-pins {
> + pins {
> + pinmux = <MT8365_PIN_37_URXD1__FUNC_URXD1>,
> + <MT8365_PIN_38_UTXD1__FUNC_UTXD1>;
> + };
> + };
> +
> + uart2_pins: uart2-pins {
> + pins {
> + pinmux = <MT8365_PIN_39_URXD2__FUNC_URXD2>,
> + <MT8365_PIN_40_UTXD2__FUNC_UTXD2>;
> + };
> + };
> +
> + usb_pins: usb-pins {
> + pins-id {
> + pinmux = <MT8365_PIN_17_GPIO17__FUNC_GPIO17>;
> + input-enable;
> + bias-pull-up;
> + };
> +
> + pins-usb0-vbus {
> + pinmux = <MT8365_PIN_16_GPIO16__FUNC_USB_DRVVBUS>;
> + output-high;
> + };
> +
> + pin-usb1-vbus {
> + pinmux = <MT8365_PIN_18_GPIO18__FUNC_GPIO18>;
> + output-high;
> + };
> + };
> +
> + pwm_pins: pwm-pins {
> + pins {
> + pinmux = <MT8365_PIN_19_DISP_PWM__FUNC_PWM_A>,
> + <MT8365_PIN_116_I2S_BCK__FUNC_PWM_C>;
> + };
> + };
> +};
> +
> +&pwm {
> + pinctrl-0 = <&pwm_pins>;
> + pinctrl-names = "default";
> + status = "okay";
> +};
> +
> +&uart0 {
> + pinctrl-0 = <&uart0_pins>;
> + pinctrl-names = "default";
> + status = "okay";
> +};
> +
> +&uart1 {
> + pinctrl-0 = <&uart1_pins>;
> + pinctrl-names = "default";
> + status = "okay";
> +};
> +
> +&uart2 {
> + pinctrl-0 = <&uart2_pins>;
> + pinctrl-names = "default";
> + status = "okay";
> +};
> diff --git a/arch/arm64/boot/dts/mediatek/mt8365.dtsi b/arch/arm64/boot/dts/mediatek/mt8365.dtsi
> new file mode 100644
> index 0000000000000..1cf2172081b20
> --- /dev/null
> +++ b/arch/arm64/boot/dts/mediatek/mt8365.dtsi
> @@ -0,0 +1,601 @@
> +// SPDX-License-Identifier: (GPL-2.0 OR MIT)
> +/*
> + * (C) 2018 MediaTek Inc.
> + * Copyright (C) 2022 BayLibre SAS
> + * Fabien Parent <[email protected]>
> + * Bernhard Rosenkränzer <[email protected]>
> + */
> +#include <dt-bindings/clock/mediatek,mt8365-clk.h>
> +#include <dt-bindings/interrupt-controller/arm-gic.h>
> +#include <dt-bindings/interrupt-controller/irq.h>
> +#include <dt-bindings/phy/phy.h>
> +#include <dt-bindings/thermal/thermal.h>
> +
> +/ {
> + compatible = "mediatek,mt8365";
> + interrupt-parent = <&sysirq>;
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + cpus: cpus {
> + #address-cells = <1>;
> + #size-cells = <0>;
> +
> + cpu-map {
> + cluster0: cluster0 {
> + core0 {
> + cpu = <&cpu0>;
> + };
> + core1 {
> + cpu = <&cpu1>;
> + };
> + core2 {
> + cpu = <&cpu2>;
> + };
> + core3 {
> + cpu = <&cpu3>;
> + };
> + };
> + };
> +
> + cpu0: cpu@0 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53";
> + reg = <0x0>;
> + #cooling-cells = <2>;
I don't see any CPU caches and I'm totally sure that this SoC does have
a unified 512KB unified L2 cache.
> + enable-method = "psci";
> + };
> +
> + cpu1: cpu@1 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53";
> + reg = <0x1>;
> + #cooling-cells = <2>;
> + enable-method = "psci";
> + };
> +
> + cpu2: cpu@2 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53";
> + reg = <0x2>;
> + #cooling-cells = <2>;
> + enable-method = "psci";
> + };
> +
> + cpu3: cpu@3 {
> + device_type = "cpu";
> + compatible = "arm,cortex-a53";
> + reg = <0x3>;
> + #cooling-cells = <2>;
> + enable-method = "psci";
> + };
> + }; > +
> + clk26m: oscillator {
> + compatible = "fixed-clock";
> + #clock-cells = <0>;
> + clock-frequency = <26000000>;
> + clock-output-names = "clk26m";
> + };
> +
> + psci {
> + compatible = "arm,psci-1.0";
> + method = "smc";
> + };
Does this SoC really not support any idle-state?! Seems pretty odd.
> +
> + reserved-memory {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> + /* 128 KiB reserved for ARM Trusted Firmware (BL31) */
> + bl31_secmon_reserved: secmon@43000000 {
> + no-map;
> + reg = <0 0x43000000 0 0x20000>;
> + };
> + };
> +
> + soc {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + compatible = "simple-bus";
> + ranges;
> +
> + gic: interrupt-controller@c000000 {
> + compatible = "arm,gic-v3";
> + #interrupt-cells = <4>;
> + interrupt-parent = <&gic>;
> + interrupt-controller;
> + reg = <0 0x0c000000 0 0x80000>,
> + <0 0x0c080000 0 0x80000>;
> +
> + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH 0>;
> + };
> +
> + topckgen: syscon@10000000 {
> + compatible = "mediatek,mt8365-topckgen", "syscon";
> + reg = <0 0x10000000 0 0x1000>;
> + #clock-cells = <1>;
> + };
> +
> + infracfg: syscon@10001000 {
> + compatible = "mediatek,mt8365-infracfg", "syscon";
> + reg = <0 0x10001000 0 0x1000>;
> + #clock-cells = <1>;
> + };
> +
> + pericfg: syscon@10003000 {
> + compatible = "mediatek,mt8365-pericfg", "syscon";
> + reg = <0 0x10003000 0 0x1000>;
> + #clock-cells = <1>;
> + };
> +
> + syscfg_pctl: syscfg-pctl@10005000 {
> + compatible = "mediatek,mt8365-syscfg", "syscon";
> + reg = <0 0x10005000 0 0x1000>;
> + };
> +
> + watchdog: watchdog@10007000 {
> + compatible = "mediatek,mt8365-wdt",
> + "mediatek,mt6589-wdt";
83 cols is fine, fits in one line.
> + reg = <0 0x10007000 0 0x100>;
> + #reset-cells = <1>;
> + };
> +
> + gpt: apxgpt@10008000 {
This should be timer@10008000
> + compatible = "mediatek,mt8365-timer",
> + "mediatek,mt6577-timer";
> + reg = <0 0x10008000 0 0x1000>;
> + interrupts = <GIC_SPI 114 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&topckgen CLK_TOP_SYS_26M_D2>;
> + clock-names = "clk13m";
> + };
> +
..snip..
> +
> + infracfg: infracfg@1020e000 {
> + compatible = "mediatek,mt8365-infracfg", "syscon";
> + reg = <0 0x1020e000 0 0x1000>;
> + };
> +
> + rng: rng@1020f000 {
> + compatible = "mediatek,mt8365-rng",
> + "mediatek,mt7623-rng";
Fits in one line.
> + reg = <0 0x1020f000 0 0x100>;
> + clocks = <&infracfg CLK_IFR_TRNG>;
> + clock-names = "rng";
> + };
> +
..snip..
> +
> + uart0: serial@11002000 {
> + compatible = "mediatek,mt8365-uart",
> + "mediatek,mt6577-uart";
85 cols is probably fine, so this should fit in one line.
> + reg = <0 0x11002000 0 0x1000>;
> + interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&clk26m>, <&infracfg CLK_IFR_UART0>;
> + clock-names = "baud", "bus";
> + dmas = <&apdma 0>, <&apdma 1>;
> + dma-names = "tx", "rx";
> + status = "disabled";
> + };
> +
..snip..
> +
> + i2c0: i2c@11007000 {
> + compatible = "mediatek,mt8365-i2c",
> + "mediatek,mt8168-i2c";
Fits in one line.
> + reg = <0 0x11007000 0 0xa0>,
> + <0 0x11000080 0 0x80>;
Same.
> + interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_LOW>;
> + clock-div = <1>;
> + clocks = <&infracfg CLK_IFR_I2C0_AXI>,
> + <&infracfg CLK_IFR_AP_DMA>;
> + clock-names = "main", "dma";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + i2c1: i2c@11008000 {
> + compatible = "mediatek,mt8365-i2c",
> + "mediatek,mt8168-i2c";
> + reg = <0 0x11008000 0 0xa0>,
> + <0 0x11000100 0 0x80>;
...again...
> + interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_LOW>;
> + clock-div = <1>;
> + clocks = <&infracfg CLK_IFR_I2C1_AXI>,
> + <&infracfg CLK_IFR_AP_DMA>;
> + clock-names = "main", "dma";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + i2c2: i2c@11009000 {
> + compatible = "mediatek,mt8365-i2c",
> + "mediatek,mt8168-i2c";
> + reg = <0 0x11009000 0 0xa0>,
> + <0 0x11000180 0 0x80>;
...and again...
> + interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_LOW>;
> + clock-div = <1>;
> + clocks = <&infracfg CLK_IFR_I2C2_AXI>,
> + <&infracfg CLK_IFR_AP_DMA>;
> + clock-names = "main", "dma";
> + #address-cells = <1>;
> + #size-cells = <0>;
> + status = "disabled";
> + };
> +
> + spi: spi@1100a000 {
> + compatible = "mediatek,mt8365-spi",
> + "mediatek,mt7622-spi";
...and it's the same here again...
I'll stop saying the same at every instance, so please check the others :-)
> + reg = <0 0x1100a000 0 0x100>;
> + #address-cells = <1>;
> + #size-cells = <0>;
> + interrupts = <GIC_SPI 62 IRQ_TYPE_LEVEL_LOW>;
> + clocks = <&topckgen CLK_TOP_UNIVPLL2_D4>,
> + <&topckgen CLK_TOP_SPI_SEL>,
> + <&infracfg CLK_IFR_SPI0>;
> + clock-names = "parent-clk", "sel-clk", "spi-clk";
> + status = "disabled";
> + };
> +
Regards,
Angelo
On Tue, Nov 15, 2022 at 03:54:06AM +0100, Bernhard Rosenkr?nzer wrote:
> This adds minimal support for the MediaTek 8365 SOC and the EVK reference
> board, allowing the board to boot to initramfs with serial port I/O.
>
> GPIO keys are supported, MMC is partially supported (needs the clocks
> driver for full support).
>
> v2:
> - Add missing dt-bindings documentation
> - Small cleanups addressing issues in v1 pointed out by Krzysztof Kozlowski
Other than this email, your patches are missing Content-Type headers yet
are UTF-8 encoded. Looks like they've been edited in mutt as there are
some mutt headers.
Rob
On Tue, 15 Nov 2022 03:54:17 +0100, Bernhard Rosenkränzer wrote:
> Add devicetree bindings for Mediatek MT8365 pinctrl driver.
>
> Signed-off-by: Bernhard Rosenkränzer <[email protected]>
> ---
> .../pinctrl/mediatek,mt8365-pinctrl.yaml | 68 +++++++++++++++++++
> 1 file changed, 68 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/pinctrl/mediatek,mt8365-pinctrl.yaml
>
My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):
yamllint warnings/errors:
dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/pinctrl/mediatek,mt8365-pinctrl.yaml: properties:reg: 'anyOf' conditional failed, one must be fixed:
'minItems' is not one of ['maxItems', 'description', 'deprecated']
hint: Only "maxItems" is required for a single entry if there are no constraints defined for the values.
'minItems' is not one of ['description', 'deprecated', 'const', 'enum', 'minimum', 'maximum', 'multipleOf', 'default', '$ref', 'oneOf']
'maxItems' is not one of ['description', 'deprecated', 'const', 'enum', 'minimum', 'maximum', 'multipleOf', 'default', '$ref', 'oneOf']
1 is less than the minimum of 2
hint: Arrays must be described with a combination of minItems/maxItems/items
hint: cell array properties must define how many entries and what the entries are when there is more than one entry.
from schema $id: http://devicetree.org/meta-schemas/core.yaml#
Error: Documentation/devicetree/bindings/pinctrl/mediatek,mt8365-pinctrl.example.dts:34.29-30 syntax error
FATAL ERROR: Unable to parse input tree
make[1]: *** [scripts/Makefile.lib:406: Documentation/devicetree/bindings/pinctrl/mediatek,mt8365-pinctrl.example.dtb] Error 1
make[1]: *** Waiting for unfinished jobs....
make: *** [Makefile:1492: dt_binding_check] Error 2
doc reference errors (make refcheckdocs):
See https://patchwork.ozlabs.org/patch/
This check can fail if there are any dependencies. The base for a patch
series is generally the most recent rc1.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit.