From: Sinthu Raja <[email protected]>
Hi,
This series of patches add support for AM68 Starter kit(SK). AM68 SK
is a low cost, small form factor board designed for TI’s J721S2/AM68 SoC.
Refer below link to J721S2/AM68 Technical Reference Manual for further details:
http://www.ti.com/lit/pdf/spruj28
Design files can be referrred from https://www.ti.com/lit/zip/SPRR463
Changes in V3:
Addressed all the review comments and the changes are captured in seperate patches.
- Removed the unused nodes that are disabled by default.
- Updated the gpio regulator node: gpio-regulator-tlv to "regulator-tlv".
V1: https://lore.kernel.org/linux-arm-kernel/[email protected]/t/#mbe43b02221733bb6eb06b203359e90ec08406afc
V2: https://lore.kernel.org/lkml/[email protected]/
Sinthu Raja (3):
dt-bindings: arm: ti: Add binding for AM68 SK
arm64: dts: ti: Add initial support for AM68 SK System on Module
arm64: dts: ti: k3-am68-sk: Add support for AM68 SK base board
.../devicetree/bindings/arm/ti/k3.yaml | 1 +
arch/arm64/boot/dts/ti/Makefile | 2 +
.../boot/dts/ti/k3-am68-sk-base-board.dts | 335 ++++++++++++++++++
arch/arm64/boot/dts/ti/k3-am68-sk-som.dtsi | 31 ++
4 files changed, 369 insertions(+)
create mode 100644 arch/arm64/boot/dts/ti/k3-am68-sk-base-board.dts
create mode 100644 arch/arm64/boot/dts/ti/k3-am68-sk-som.dtsi
--
2.36.1