From: Uwe Kleine-König <[email protected]>
The probe function doesn't make use of the i2c_device_id * parameter so it
can be trivially converted.
Signed-off-by: Uwe Kleine-König <[email protected]>
---
drivers/iio/light/gp2ap002.c | 5 ++---
1 file changed, 2 insertions(+), 3 deletions(-)
diff --git a/drivers/iio/light/gp2ap002.c b/drivers/iio/light/gp2ap002.c
index 8000fa347344..c0430db0038a 100644
--- a/drivers/iio/light/gp2ap002.c
+++ b/drivers/iio/light/gp2ap002.c
@@ -425,8 +425,7 @@ static struct regmap_bus gp2ap002_regmap_bus = {
.reg_write = gp2ap002_regmap_i2c_write,
};
-static int gp2ap002_probe(struct i2c_client *client,
- const struct i2c_device_id *id)
+static int gp2ap002_probe(struct i2c_client *client)
{
struct gp2ap002 *gp2ap002;
struct iio_dev *indio_dev;
@@ -711,7 +710,7 @@ static struct i2c_driver gp2ap002_driver = {
.of_match_table = gp2ap002_of_match,
.pm = pm_ptr(&gp2ap002_dev_pm_ops),
},
- .probe = gp2ap002_probe,
+ .probe_new = gp2ap002_probe,
.remove = gp2ap002_remove,
.id_table = gp2ap002_id_table,
};
--
2.38.1