From: Uwe Kleine-König <[email protected]>
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
Signed-off-by: Uwe Kleine-König <[email protected]>
---
drivers/iio/proximity/mb1232.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/iio/proximity/mb1232.c b/drivers/iio/proximity/mb1232.c
index 0bca5f74de68..e70cac8240af 100644
--- a/drivers/iio/proximity/mb1232.c
+++ b/drivers/iio/proximity/mb1232.c
@@ -180,9 +180,9 @@ static const struct iio_info mb1232_info = {
.read_raw = mb1232_read_raw,
};
-static int mb1232_probe(struct i2c_client *client,
- const struct i2c_device_id *id)
+static int mb1232_probe(struct i2c_client *client)
{
+ const struct i2c_device_id *id = i2c_client_get_device_id(client);
struct iio_dev *indio_dev;
struct mb1232_data *data;
int ret;
@@ -264,7 +264,7 @@ static struct i2c_driver mb1232_driver = {
.name = "maxbotix-mb1232",
.of_match_table = of_mb1232_match,
},
- .probe = mb1232_probe,
+ .probe_new = mb1232_probe,
.id_table = mb1232_id,
};
module_i2c_driver(mb1232_driver);
--
2.38.1