From: Uwe Kleine-König <[email protected]>
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
Signed-off-by: Uwe Kleine-König <[email protected]>
---
drivers/iio/temperature/mlx90614.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/iio/temperature/mlx90614.c b/drivers/iio/temperature/mlx90614.c
index 8eb0f962ed25..909fadb62349 100644
--- a/drivers/iio/temperature/mlx90614.c
+++ b/drivers/iio/temperature/mlx90614.c
@@ -537,9 +537,9 @@ static int mlx90614_probe_num_ir_sensors(struct i2c_client *client)
return (ret & MLX90614_CONFIG_DUAL_MASK) ? 1 : 0;
}
-static int mlx90614_probe(struct i2c_client *client,
- const struct i2c_device_id *id)
+static int mlx90614_probe(struct i2c_client *client)
{
+ const struct i2c_device_id *id = i2c_client_get_device_id(client);
struct iio_dev *indio_dev;
struct mlx90614_data *data;
int ret;
@@ -675,7 +675,7 @@ static struct i2c_driver mlx90614_driver = {
.of_match_table = mlx90614_of_match,
.pm = pm_ptr(&mlx90614_pm_ops),
},
- .probe = mlx90614_probe,
+ .probe_new = mlx90614_probe,
.remove = mlx90614_remove,
.id_table = mlx90614_id,
};
--
2.38.1