2022-11-19 00:58:45

by Uwe Kleine-König

[permalink] [raw]
Subject: [PATCH 541/606] regulator: fan53555: Convert to i2c's .probe_new()

From: Uwe Kleine-König <[email protected]>

.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.

Signed-off-by: Uwe Kleine-König <[email protected]>
---
drivers/regulator/fan53555.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/regulator/fan53555.c b/drivers/regulator/fan53555.c
index dac1fb584fa3..529963a7e4f5 100644
--- a/drivers/regulator/fan53555.c
+++ b/drivers/regulator/fan53555.c
@@ -549,9 +549,9 @@ static const struct of_device_id __maybe_unused fan53555_dt_ids[] = {
};
MODULE_DEVICE_TABLE(of, fan53555_dt_ids);

-static int fan53555_regulator_probe(struct i2c_client *client,
- const struct i2c_device_id *id)
+static int fan53555_regulator_probe(struct i2c_client *client)
{
+ const struct i2c_device_id *id = i2c_client_get_device_id(client);
struct device_node *np = client->dev.of_node;
struct fan53555_device_info *di;
struct fan53555_platform_data *pdata;
@@ -665,7 +665,7 @@ static struct i2c_driver fan53555_regulator_driver = {
.name = "fan53555-regulator",
.of_match_table = of_match_ptr(fan53555_dt_ids),
},
- .probe = fan53555_regulator_probe,
+ .probe_new = fan53555_regulator_probe,
.id_table = fan53555_id,
};

--
2.38.1



2022-11-22 19:52:03

by Mark Brown

[permalink] [raw]
Subject: Re: [PATCH 541/606] regulator: fan53555: Convert to i2c's .probe_new()

On Fri, Nov 18, 2022 at 11:44:35PM +0100, Uwe Kleine-K?nig wrote:

> + const struct i2c_device_id *id = i2c_client_get_device_id(client);

This function is only in -next so I'll skip all the patches that need
it.


Attachments:
(No filename) (219.00 B)
signature.asc (499.00 B)
Download all attachments

2022-11-22 20:27:21

by Uwe Kleine-König

[permalink] [raw]
Subject: Re: [PATCH 541/606] regulator: fan53555: Convert to i2c's .probe_new()

On Tue, Nov 22, 2022 at 07:41:12PM +0000, Mark Brown wrote:
> On Fri, Nov 18, 2022 at 11:44:35PM +0100, Uwe Kleine-K?nig wrote:
>
> > + const struct i2c_device_id *id = i2c_client_get_device_id(client);
>
> This function is only in -next so I'll skip all the patches that need
> it.

Just in case you missed that information from the cover letter:
You can pull this function into your tree from Wolfram's immutable
branch at

https://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux.git i2c/client_device_id_helper-immutable

Best regards
Uwe

--
Pengutronix e.K. | Uwe Kleine-K?nig |
Industrial Linux Solutions | https://www.pengutronix.de/ |


Attachments:
(No filename) (722.00 B)
signature.asc (499.00 B)
Download all attachments

2022-11-23 14:21:35

by Mark Brown

[permalink] [raw]
Subject: Re: [PATCH 541/606] regulator: fan53555: Convert to i2c's .probe_new()

On Tue, Nov 22, 2022 at 09:01:40PM +0100, Uwe Kleine-K?nig wrote:
> On Tue, Nov 22, 2022 at 07:41:12PM +0000, Mark Brown wrote:
> > On Fri, Nov 18, 2022 at 11:44:35PM +0100, Uwe Kleine-K?nig wrote:

> > > + const struct i2c_device_id *id = i2c_client_get_device_id(client);

> > This function is only in -next so I'll skip all the patches that need
> > it.

> Just in case you missed that information from the cover letter:
> You can pull this function into your tree from Wolfram's immutable
> branch at

> https://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux.git i2c/client_device_id_helper-immutable

No, the bit I found about it in the commit message (which I had to go
looking for...) was a link to some discussion about how it'd be a good
idea to apply it. I suspect things might go more smoothly if things
were resent as per-subsystem serieses TBH.


Attachments:
(No filename) (882.00 B)
signature.asc (499.00 B)
Download all attachments