From: Uwe Kleine-König <[email protected]>
.probe_new() doesn't get the i2c_device_id * parameter, so determine
that explicitly in the probe function.
Signed-off-by: Uwe Kleine-König <[email protected]>
---
drivers/iio/adc/ina2xx-adc.c | 6 +++---
1 file changed, 3 insertions(+), 3 deletions(-)
diff --git a/drivers/iio/adc/ina2xx-adc.c b/drivers/iio/adc/ina2xx-adc.c
index 910e7e965fc4..38d9d7b2313e 100644
--- a/drivers/iio/adc/ina2xx-adc.c
+++ b/drivers/iio/adc/ina2xx-adc.c
@@ -946,9 +946,9 @@ static int ina2xx_init(struct ina2xx_chip_info *chip, unsigned int config)
return ina2xx_set_calibration(chip);
}
-static int ina2xx_probe(struct i2c_client *client,
- const struct i2c_device_id *id)
+static int ina2xx_probe(struct i2c_client *client)
{
+ const struct i2c_device_id *id = i2c_client_get_device_id(client);
struct ina2xx_chip_info *chip;
struct iio_dev *indio_dev;
unsigned int val;
@@ -1090,7 +1090,7 @@ static struct i2c_driver ina2xx_driver = {
.name = KBUILD_MODNAME,
.of_match_table = ina2xx_of_match,
},
- .probe = ina2xx_probe,
+ .probe_new = ina2xx_probe,
.remove = ina2xx_remove,
.id_table = ina2xx_id,
};
--
2.38.1