FL8005A uses SGM3140 Flash LED driver. Add it to the device tree.
Signed-off-by: Lin, Meng-Bo <[email protected]>
---
.../boot/dts/qcom/msm8916-gplus-fl8005a.dts | 23 +++++++++++++++++++
1 file changed, 23 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts b/arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts
index 73597f1883aa..bd021802cca6 100644
--- a/arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts
+++ b/arch/arm64/boot/dts/qcom/msm8916-gplus-fl8005a.dts
@@ -21,6 +21,21 @@ chosen {
stdout-path = "serial0";
};
+ flash-led-controller {
+ compatible = "sgmicro,sgm3140";
+ enable-gpios = <&msmgpio 31 GPIO_ACTIVE_HIGH>;
+ flash-gpios = <&msmgpio 32 GPIO_ACTIVE_HIGH>;
+
+ pinctrl-names = "default";
+ pinctrl-0 = <&camera_flash_default>;
+
+ flash_led: led {
+ function = LED_FUNCTION_FLASH;
+ color = <LED_COLOR_ID_WHITE>;
+ flash-max-timeout-us = <250000>;
+ };
+ };
+
gpio-keys {
compatible = "gpio-keys";
@@ -239,6 +254,14 @@ l18 {
};
&msmgpio {
+ camera_flash_default: camera-flash-default-state {
+ pins = "gpio31", "gpio32";
+ function = "gpio";
+
+ drive-strength = <2>;
+ bias-disable;
+ };
+
gpio_keys_default: gpio-keys-default-state {
pins = "gpio107";
function = "gpio";
--
2.30.2