The following series of patches add support for the following
on J721S2 common processor board,
- USB
- SerDes
- OSPI
- PCIe
Changes from v1:
* Resolve issues with dt schema reporting
* Minor changes related to consistency on node naming and value
Changes from v2:
* Added PCIe RC + EP enablement patchsets
* Added device-id for j722s2 PCIe host in dt documentation
* Reworked SERDES + WIZ enablement patchset to use properies for clocks
defines versus entire devicetree nodes. Results in cleaner code that
doesn't break dt-schema or the driver functionality.
Changes from v3:
* Rebased changes on top of '[PATCH 00/12] TI J7x Disable Incomplete DT Nodes'
* Removed "dt-bindings: PCI: Add host mode device-id for j721s2 platform" patch and
send it own series to avoid a dependency that would hold up other patches in this
series
Changes from v4:
* Add my Signed-off-by lines to all patchsets
Changes from v5:
* Removed Cc from commit messages to reduce clutter
* Squashed changes for device tree nodes that get modified latter in the patchset
series
Changes from v6:
* Changes to ti,j721s2-wiz-10g compatible string from ti,am64-wiz-10g but
requires this series to be merged first
Ref: https://lore.kernel.org/linux-arm-kernel/[email protected]/
* Removed unused pcie1_ep based on feedback
* Switch from incorrect "ti,j721e-system-controller", "syscon", "simple-mfd" compatible for
SPI node to "simple-bus"
Aswath Govindraju (7):
arm64: dts: ti: k3-j721s2-main: Add support for USB
arm64: dts: ti: k3-j721s2-mcu-wakeup: Add support of OSPI
arm64: dts: ti: k3-j721s2-common-proc-board: Enable SERDES0
arm64: dts: ti: k3-j721s2-common-proc-board: Add USB support
arm64: dts: ti: k3-j721s2: Add support for OSPI Flashes
arm64: dts: ti: k3-j721s2-main: Add PCIe device tree node
arm64: dts: ti: k3-j721s2-common-proc-board: Enable PCIe
Matt Ranostay (1):
arm64: dts: ti: k3-j721s2-main: Add SERDES and WIZ device tree node
.../dts/ti/k3-j721s2-common-proc-board.dts | 85 +++++++++++
arch/arm64/boot/dts/ti/k3-j721s2-main.dtsi | 137 ++++++++++++++++++
.../boot/dts/ti/k3-j721s2-mcu-wakeup.dtsi | 40 +++++
arch/arm64/boot/dts/ti/k3-j721s2-som-p0.dtsi | 42 ++++++
4 files changed, 304 insertions(+)
--
2.38.GIT