From: Philippe Schenker <[email protected]>
Disable usb over-current of the chipidea driver on all Carrier-Boards
used by Toradex. Do this as we don't want to use this functionality on
our Carrier Boards and to leave it open to someone who includes our
module-level device-trees.
This will prevent the warning "No over current polarity defined" from
being printed on boot.
Signed-off-by: Philippe Schenker <[email protected]>
---
arch/arm/boot/dts/imx6ull-colibri-aster.dtsi | 2 ++
arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi | 2 ++
arch/arm/boot/dts/imx6ull-colibri-iris.dtsi | 2 ++
3 files changed, 6 insertions(+)
diff --git a/arch/arm/boot/dts/imx6ull-colibri-aster.dtsi b/arch/arm/boot/dts/imx6ull-colibri-aster.dtsi
index c9133ba2d705..de4dc7c1a03a 100644
--- a/arch/arm/boot/dts/imx6ull-colibri-aster.dtsi
+++ b/arch/arm/boot/dts/imx6ull-colibri-aster.dtsi
@@ -130,11 +130,13 @@ &uart5 {
};
&usbotg1 {
+ disable-over-current;
vbus-supply = <®_usbh_vbus>;
status = "okay";
};
&usbotg2 {
+ disable-over-current;
vbus-supply = <®_usbh_vbus>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi b/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi
index e29907428c20..692ef26fbab3 100644
--- a/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi
+++ b/arch/arm/boot/dts/imx6ull-colibri-eval-v3.dtsi
@@ -106,11 +106,13 @@ &uart5 {
};
&usbotg1 {
+ disable-over-current;
vbus-supply = <®_usbh_vbus>;
status = "okay";
};
&usbotg2 {
+ disable-over-current;
vbus-supply = <®_usbh_vbus>;
status = "okay";
};
diff --git a/arch/arm/boot/dts/imx6ull-colibri-iris.dtsi b/arch/arm/boot/dts/imx6ull-colibri-iris.dtsi
index 166a0aefc869..f52f8b5ad8a6 100644
--- a/arch/arm/boot/dts/imx6ull-colibri-iris.dtsi
+++ b/arch/arm/boot/dts/imx6ull-colibri-iris.dtsi
@@ -117,11 +117,13 @@ &uart5 {
};
&usbotg1 {
+ disable-over-current;
vbus-supply = <®_usbh_vbus>;
status = "okay";
};
&usbotg2 {
+ disable-over-current;
vbus-supply = <®_usbh_vbus>;
status = "okay";
};
--
2.38.1