2022-11-24 10:17:45

by Yu Zhe

[permalink] [raw]
Subject: [PATCH] scsi: megaraid_sas: fix some spelling mistakes in comment

Fix typos in comment.

Signed-off-by: Yu Zhe <[email protected]>
---
drivers/scsi/megaraid/megaraid_sas_fusion.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/scsi/megaraid/megaraid_sas_fusion.c b/drivers/scsi/megaraid/megaraid_sas_fusion.c
index 6650f8c8e9b0..c53c29a0a018 100644
--- a/drivers/scsi/megaraid/megaraid_sas_fusion.c
+++ b/drivers/scsi/megaraid/megaraid_sas_fusion.c
@@ -80,7 +80,7 @@ static void megasas_fusion_crash_dump(struct megasas_instance *instance);
* @ocr_context: If called from OCR context this will
* be set to 1, else 0
*
- * This function initates a chip reset followed by a wait for controller to
+ * This function initiates a chip reset followed by a wait for controller to
* transition to ready state.
* During this, driver will block all access to PCI config space from userspace
*/
@@ -334,7 +334,7 @@ megasas_fire_cmd_fusion(struct megasas_instance *instance,
*
* This function is only for fusion controllers.
* Update host can queue, if firmware downgrade max supported firmware commands.
- * Firmware upgrade case will be skiped because underlying firmware has
+ * Firmware upgrade case will be skipped because underlying firmware has
* more resource than exposed to the OS.
*
*/
@@ -2588,7 +2588,7 @@ static void megasas_stream_detect(struct megasas_instance *instance,
if ((io_info->ldStartBlock != current_sd->next_seq_lba) &&
((!io_info->isRead) || (!is_read_ahead)))
/*
- * Once the API availible we need to change this.
+ * Once the API available we need to change this.
* At this point we are not allowing any gap
*/
continue;
@@ -4650,7 +4650,7 @@ megasas_issue_tm(struct megasas_instance *instance, u16 device_handle,
}

/*
- * megasas_fusion_smid_lookup : Look for fusion command correpspodning to SCSI
+ * megasas_fusion_smid_lookup : Look for fusion command corresponding to SCSI
* @instance: per adapter struct
*
* Return Non Zero index, if SMID found in outstanding commands
--
2.11.0


2022-11-24 16:35:15

by Randy Dunlap

[permalink] [raw]
Subject: Re: [PATCH] scsi: megaraid_sas: fix some spelling mistakes in comment

Hi--

These changes all look good.
One small nit below:

On 11/24/22 01:25, Yu Zhe wrote:
> Fix typos in comment.
>
> Signed-off-by: Yu Zhe <[email protected]>
> ---
> drivers/scsi/megaraid/megaraid_sas_fusion.c | 8 ++++----
> 1 file changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/scsi/megaraid/megaraid_sas_fusion.c b/drivers/scsi/megaraid/megaraid_sas_fusion.c
> index 6650f8c8e9b0..c53c29a0a018 100644
> --- a/drivers/scsi/megaraid/megaraid_sas_fusion.c
> +++ b/drivers/scsi/megaraid/megaraid_sas_fusion.c
> @@ -80,7 +80,7 @@ static void megasas_fusion_crash_dump(struct megasas_instance *instance);
> * @ocr_context: If called from OCR context this will
> * be set to 1, else 0
> *
> - * This function initates a chip reset followed by a wait for controller to
> + * This function initiates a chip reset followed by a wait for controller to
> * transition to ready state.
> * During this, driver will block all access to PCI config space from userspace
> */
> @@ -334,7 +334,7 @@ megasas_fire_cmd_fusion(struct megasas_instance *instance,
> *
> * This function is only for fusion controllers.
> * Update host can queue, if firmware downgrade max supported firmware commands.
> - * Firmware upgrade case will be skiped because underlying firmware has
> + * Firmware upgrade case will be skipped because underlying firmware has
> * more resource than exposed to the OS.
> *
> */
> @@ -2588,7 +2588,7 @@ static void megasas_stream_detect(struct megasas_instance *instance,
> if ((io_info->ldStartBlock != current_sd->next_seq_lba) &&
> ((!io_info->isRead) || (!is_read_ahead)))
> /*
> - * Once the API availible we need to change this.
> + * Once the API available we need to change this.

* Once the API is available we need to change this.

> * At this point we are not allowing any gap
> */
> continue;
> @@ -4650,7 +4650,7 @@ megasas_issue_tm(struct megasas_instance *instance, u16 device_handle,
> }
>
> /*
> - * megasas_fusion_smid_lookup : Look for fusion command correpspodning to SCSI
> + * megasas_fusion_smid_lookup : Look for fusion command corresponding to SCSI
> * @instance: per adapter struct
> *
> * Return Non Zero index, if SMID found in outstanding commands

Reviewed-by: Randy Dunlap <[email protected]>

Thanks.
--
~Randy

2022-11-25 02:27:47

by Yu Zhe

[permalink] [raw]
Subject: [PATCH v2] scsi: megaraid_sas: fix some spelling mistakes in comment

Fix typos in comment.

Reviewed-by: Randy Dunlap <[email protected]>
Signed-off-by: Yu Zhe <[email protected]>
---
drivers/scsi/megaraid/megaraid_sas_fusion.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/scsi/megaraid/megaraid_sas_fusion.c b/drivers/scsi/megaraid/megaraid_sas_fusion.c
index 6650f8c8e9b0..fe70f8f11435 100644
--- a/drivers/scsi/megaraid/megaraid_sas_fusion.c
+++ b/drivers/scsi/megaraid/megaraid_sas_fusion.c
@@ -80,7 +80,7 @@ static void megasas_fusion_crash_dump(struct megasas_instance *instance);
* @ocr_context: If called from OCR context this will
* be set to 1, else 0
*
- * This function initates a chip reset followed by a wait for controller to
+ * This function initiates a chip reset followed by a wait for controller to
* transition to ready state.
* During this, driver will block all access to PCI config space from userspace
*/
@@ -334,7 +334,7 @@ megasas_fire_cmd_fusion(struct megasas_instance *instance,
*
* This function is only for fusion controllers.
* Update host can queue, if firmware downgrade max supported firmware commands.
- * Firmware upgrade case will be skiped because underlying firmware has
+ * Firmware upgrade case will be skipped because underlying firmware has
* more resource than exposed to the OS.
*
*/
@@ -2588,7 +2588,7 @@ static void megasas_stream_detect(struct megasas_instance *instance,
if ((io_info->ldStartBlock != current_sd->next_seq_lba) &&
((!io_info->isRead) || (!is_read_ahead)))
/*
- * Once the API availible we need to change this.
+ * Once the API is available we need to change this.
* At this point we are not allowing any gap
*/
continue;
@@ -4650,7 +4650,7 @@ megasas_issue_tm(struct megasas_instance *instance, u16 device_handle,
}

/*
- * megasas_fusion_smid_lookup : Look for fusion command correpspodning to SCSI
+ * megasas_fusion_smid_lookup : Look for fusion command corresponding to SCSI
* @instance: per adapter struct
*
* Return Non Zero index, if SMID found in outstanding commands
--
2.11.0

2022-11-26 03:09:36

by Martin K. Petersen

[permalink] [raw]
Subject: Re: [PATCH v2] scsi: megaraid_sas: fix some spelling mistakes in comment


Yu,

> Fix typos in comment.

Applied to 6.2/scsi-staging, thanks!

--
Martin K. Petersen Oracle Linux Engineering

2022-12-01 03:50:54

by Martin K. Petersen

[permalink] [raw]
Subject: Re: [PATCH v2] scsi: megaraid_sas: fix some spelling mistakes in comment

On Fri, 25 Nov 2022 10:07:03 +0800, Yu Zhe wrote:

> Fix typos in comment.
>
>

Applied to 6.2/scsi-queue, thanks!

[1/1] scsi: megaraid_sas: fix some spelling mistakes in comment
https://git.kernel.org/mkp/scsi/c/76dc609556c6

--
Martin K. Petersen Oracle Linux Engineering