SND_SOC_QCOM_COMMON depends on SOUNDWIRE for some symbols but this
is not explicitly specified using Kconfig depends. On the other hand
SND_SOC_QCOM_COMMON is also directly selected by the sound card
Kconfigs, this could result in various combinations and some symbols
ending up in modules and soundcard that uses those symbols as in-build
driver.
Fix these issues by explicitly specifying the dependencies of
SND_SOC_QCOM_COMMON and also use imply a to select SND_SOC_QCOM_COMMON
so that the symbol is selected based on its dependencies.
Also remove dummy stubs in common.c around CONFIG_SOUNDWIRE
Fixes: 3bd975f3ae0a ("ASoC: qcom: sm8250: move some code to common")
Reported-by: kernel test robot <[email protected]>
Signed-off-by: Srinivas Kandagatla <[email protected]>
---
sound/soc/qcom/Kconfig | 16 +++++++++-------
sound/soc/qcom/common.c | 2 --
sound/soc/qcom/common.h | 23 -----------------------
3 files changed, 9 insertions(+), 32 deletions(-)
diff --git a/sound/soc/qcom/Kconfig b/sound/soc/qcom/Kconfig
index 8c7398bc1ca8..96a6d4731e6f 100644
--- a/sound/soc/qcom/Kconfig
+++ b/sound/soc/qcom/Kconfig
@@ -2,6 +2,7 @@
menuconfig SND_SOC_QCOM
tristate "ASoC support for QCOM platforms"
depends on ARCH_QCOM || COMPILE_TEST
+ imply SND_SOC_QCOM_COMMON
help
Say Y or M if you want to add support to use audio devices
in Qualcomm Technologies SOC-based platforms.
@@ -59,13 +60,14 @@ config SND_SOC_STORM
config SND_SOC_APQ8016_SBC
tristate "SoC Audio support for APQ8016 SBC platforms"
select SND_SOC_LPASS_APQ8016
- select SND_SOC_QCOM_COMMON
+ depends on SND_SOC_QCOM_COMMON
help
Support for Qualcomm Technologies LPASS audio block in
APQ8016 SOC-based systems.
Say Y if you want to use audio devices on MI2S.
config SND_SOC_QCOM_COMMON
+ depends on SOUNDWIRE
tristate
config SND_SOC_QDSP6_COMMON
@@ -142,7 +144,7 @@ config SND_SOC_MSM8996
depends on QCOM_APR
depends on COMMON_CLK
select SND_SOC_QDSP6
- select SND_SOC_QCOM_COMMON
+ depends on SND_SOC_QCOM_COMMON
help
Support for Qualcomm Technologies LPASS audio block in
APQ8096 SoC-based systems.
@@ -153,7 +155,7 @@ config SND_SOC_SDM845
depends on QCOM_APR && I2C && SOUNDWIRE
depends on COMMON_CLK
select SND_SOC_QDSP6
- select SND_SOC_QCOM_COMMON
+ depends on SND_SOC_QCOM_COMMON
select SND_SOC_RT5663
select SND_SOC_MAX98927
imply SND_SOC_CROS_EC_CODEC
@@ -167,7 +169,7 @@ config SND_SOC_SM8250
depends on QCOM_APR && SOUNDWIRE
depends on COMMON_CLK
select SND_SOC_QDSP6
- select SND_SOC_QCOM_COMMON
+ depends on SND_SOC_QCOM_COMMON
help
To add support for audio on Qualcomm Technologies Inc.
SM8250 SoC-based systems.
@@ -178,7 +180,7 @@ config SND_SOC_SC8280XP
depends on QCOM_APR && SOUNDWIRE
depends on COMMON_CLK
select SND_SOC_QDSP6
- select SND_SOC_QCOM_COMMON
+ depends on SND_SOC_QCOM_COMMON
help
To add support for audio on Qualcomm Technologies Inc.
SC8280XP SoC-based systems.
@@ -188,7 +190,7 @@ config SND_SOC_SC7180
tristate "SoC Machine driver for SC7180 boards"
depends on I2C && GPIOLIB
depends on SOUNDWIRE || SOUNDWIRE=n
- select SND_SOC_QCOM_COMMON
+ depends on SND_SOC_QCOM_COMMON
select SND_SOC_LPASS_SC7180
select SND_SOC_MAX98357A
select SND_SOC_RT5682_I2C
@@ -202,7 +204,7 @@ config SND_SOC_SC7180
config SND_SOC_SC7280
tristate "SoC Machine driver for SC7280 boards"
depends on I2C && SOUNDWIRE
- select SND_SOC_QCOM_COMMON
+ depends on SND_SOC_QCOM_COMMON
select SND_SOC_LPASS_SC7280
select SND_SOC_MAX98357A
select SND_SOC_WCD938X_SDW
diff --git a/sound/soc/qcom/common.c b/sound/soc/qcom/common.c
index 69dd3b504e20..49c74c1662a3 100644
--- a/sound/soc/qcom/common.c
+++ b/sound/soc/qcom/common.c
@@ -180,7 +180,6 @@ int qcom_snd_parse_of(struct snd_soc_card *card)
}
EXPORT_SYMBOL_GPL(qcom_snd_parse_of);
-#if IS_ENABLED(CONFIG_SOUNDWIRE)
int qcom_snd_sdw_prepare(struct snd_pcm_substream *substream,
struct sdw_stream_runtime *sruntime,
bool *stream_prepared)
@@ -294,7 +293,6 @@ int qcom_snd_sdw_hw_free(struct snd_pcm_substream *substream,
return 0;
}
EXPORT_SYMBOL_GPL(qcom_snd_sdw_hw_free);
-#endif
int qcom_snd_wcd_jack_setup(struct snd_soc_pcm_runtime *rtd,
struct snd_soc_jack *jack, bool *jack_setup)
diff --git a/sound/soc/qcom/common.h b/sound/soc/qcom/common.h
index c5472a642de0..3ef5bb6d12df 100644
--- a/sound/soc/qcom/common.h
+++ b/sound/soc/qcom/common.h
@@ -11,7 +11,6 @@ int qcom_snd_parse_of(struct snd_soc_card *card);
int qcom_snd_wcd_jack_setup(struct snd_soc_pcm_runtime *rtd,
struct snd_soc_jack *jack, bool *jack_setup);
-#if IS_ENABLED(CONFIG_SOUNDWIRE)
int qcom_snd_sdw_prepare(struct snd_pcm_substream *substream,
struct sdw_stream_runtime *runtime,
bool *stream_prepared);
@@ -21,26 +20,4 @@ int qcom_snd_sdw_hw_params(struct snd_pcm_substream *substream,
int qcom_snd_sdw_hw_free(struct snd_pcm_substream *substream,
struct sdw_stream_runtime *sruntime,
bool *stream_prepared);
-#else
-static inline int qcom_snd_sdw_prepare(struct snd_pcm_substream *substream,
- struct sdw_stream_runtime *runtime,
- bool *stream_prepared)
-{
- return -ENOTSUPP;
-}
-
-static inline int qcom_snd_sdw_hw_params(struct snd_pcm_substream *substream,
- struct snd_pcm_hw_params *params,
- struct sdw_stream_runtime **psruntime)
-{
- return -ENOTSUPP;
-}
-
-static inline int qcom_snd_sdw_hw_free(struct snd_pcm_substream *substream,
- struct sdw_stream_runtime *sruntime,
- bool *stream_prepared)
-{
- return -ENOTSUPP;
-}
-#endif
#endif
--
2.25.1
On Thu, 24 Nov 2022 14:03:51 +0000, Srinivas Kandagatla wrote:
> SND_SOC_QCOM_COMMON depends on SOUNDWIRE for some symbols but this
> is not explicitly specified using Kconfig depends. On the other hand
> SND_SOC_QCOM_COMMON is also directly selected by the sound card
> Kconfigs, this could result in various combinations and some symbols
> ending up in modules and soundcard that uses those symbols as in-build
> driver.
>
> [...]
Applied to
https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next
Thanks!
[1/1] ASoC: qcom: cleanup and fix dependency of QCOM_COMMON
commit: 8d89cf6ff229ff31cd4f73f5b3928564b81fc41e
All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.
You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.
If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.
Please add any relevant lists and maintainers to the CCs when replying
to this mail.
Thanks,
Mark