R528 and T113 are SoCs based on the same design as D1/D1s, but with ARM
CPUs instead of RISC-V. They use the same CCU implementation, meaning
the CCU has gates/resets for all peripherals present on any SoC in this
family. I verified the CAN bus bits are also present on D1/D1s.
Patches 1-2 clean up the Kconfig in preparation for patch 3, which
allows building the driver. Patches 4-5 add the missing driver bits.
András Szemző (1):
clk: sunxi-ng: d1: Mark cpux clock as critical
Fabien Poussin (1):
clk: sunxi-ng: d1: Add CAN bus gates and resets
Samuel Holland (3):
clk: sunxi-ng: Remove duplicate ARCH_SUNXI dependencies
clk: sunxi-ng: Move SoC driver conditions to dependencies
clk: sunxi-ng: d1: Allow building for R528/T113
drivers/clk/sunxi-ng/Kconfig | 71 ++++++++++++-----------
drivers/clk/sunxi-ng/ccu-sun20i-d1.c | 13 ++++-
drivers/clk/sunxi-ng/ccu-sun20i-d1.h | 2 +-
include/dt-bindings/clock/sun20i-d1-ccu.h | 2 +
include/dt-bindings/reset/sun20i-d1-ccu.h | 2 +
5 files changed, 53 insertions(+), 37 deletions(-)
--
2.37.4