The MMC slot uses GPIO pins for Write Protext and Card Detect.
Define these so everything works correctly.
Signed-off-by: Mark Jackson <[email protected]>
---
arch/arm/boot/dts/am335x-nano.dts | 5 +++--
1 file changed, 3 insertions(+), 2 deletions(-)
diff --git a/arch/arm/boot/dts/am335x-nano.dts b/arch/arm/boot/dts/am335x-nano.dts
index 960ef1384bbe..58062cec39c0 100644
--- a/arch/arm/boot/dts/am335x-nano.dts
+++ b/arch/arm/boot/dts/am335x-nano.dts
@@ -418,8 +418,9 @@ &mmc1 {
pinctrl-names = "default";
pinctrl-0 = <&mmc1_pins>;
bus-width = <4>;
- cd-gpios = <&gpio3 8 0>;
- wp-gpios = <&gpio3 18 0>;
+ cd-debounce-delay-ms = <5>;
+ cd-gpios = <&gpio3 8 GPIO_ACTIVE_LOW>;
+ wp-gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>;
};
#include "tps65217.dtsi"
--
2.34.1