This patch does following:
1. Adds a new cros-ec-uart driver. This driver can send EC requests on
UART and process response packets received on UART transport.
2. Once probed, this driver will initialize the serdev device based on
the underlying information in the ACPI resource. After serdev device
properties are set, this driver will register itself cros-ec.
3. High level driver can use this implementation to talk to ChromeOS
Embedded Controller device in case it supports UART as transport.
4. When cros-ec driver initiates a request packet, outgoing message is
processed in buffer and sent via serdev. Once bytes are sent, driver
enables a wait_queue.
5. Since ChromeOS EC device sends response asynchronously, AP's TTY
driver accumulates response bytes and calls the registered callback.
TTY driver can send multiple callback for bytes ranging from 1 to MAX
bytes supported by EC device.
6. Driver waits for EC_MSG_DEADLINE_MS to collect and process received
bytes. It wakes wait_queue if expected bytes are received or else
wait_queue timeout. Based on the error condition, driver returns
data_len or error to cros_ec.
Signed-off-by: Bhanu Prakash Maiya <[email protected]>
Signed-off-by: Mark Hasemeyer <[email protected]>
---
Changes in v8:
- Combine for loops used for xsum calculation
- Use ec_dev->dev instead of serdev->dev
- Sort includes
- Swap struct var order to match doc order
- fix whitespace
- Update contact information in MAINTAINERS
- Update copyright date
Changes in v7:
- Use ACPI ID matching
- Change MODULE_LICENSE from GPL v2 to GPL
Changes in v6:
- Tuning EC_MSG_DEADLINE_MS from 1 sec to 500 msec. Since the EC's UART
response buffer was tuned and redeuced to 256 byte, 500 msec timeout
should give enough time for 256 bytes to be recieved from SoC UART
buffer.
Changes in v5:
- Fixed checkpatch.pl warnings.
Changes in v4:
- Change EC_MSG_DEADLINE_MS from 3 secs to 1 sec. 3 secs timeout prevents
driver from intercepting EC in RO stage. In case of request failure, 1
sec allows driver to retry and send HC when EC is in RO.
- Add more information in commit message.
Changes in v3:
- checkpatch.pl script warns about char len 80 even though we have
relaxed view guideline for line below 100 chars. Currently sticking
with 80 chars in v3.
- Fixed style issues
Changes in v2:
- Fixed build error on v1.
- Changed EC timeout for response packet to 3 Sec and added comments.
- Fixed cros_ec_uart_rx_bytes function to handle rx buffer < size of response header.
---
MAINTAINERS | 7 +
drivers/platform/chrome/Kconfig | 10 +
drivers/platform/chrome/Makefile | 1 +
drivers/platform/chrome/cros_ec_uart.c | 411 +++++++++++++++++++++++++
4 files changed, 429 insertions(+)
create mode 100644 drivers/platform/chrome/cros_ec_uart.c
diff --git a/MAINTAINERS b/MAINTAINERS
index 2585e7edc3358..8ed08316fd11e 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -4918,6 +4918,13 @@ S: Maintained
F: Documentation/devicetree/bindings/sound/google,cros-ec-codec.yaml
F: sound/soc/codecs/cros_ec_codec.*
+CHROMEOS EC UART DRIVER
+M: Bhanu Prakash Maiya <[email protected]>
+R: Benson Leung <[email protected]>
+R: Tzung-Bi Shih <[email protected]>
+S: Maintained
+F: drivers/platform/chrome/cros_ec_uart.c
+
CHROMEOS EC SUBDRIVERS
M: Benson Leung <[email protected]>
R: Guenter Roeck <[email protected]>
diff --git a/drivers/platform/chrome/Kconfig b/drivers/platform/chrome/Kconfig
index 6b954c5acadb1..d4a95ec261ed3 100644
--- a/drivers/platform/chrome/Kconfig
+++ b/drivers/platform/chrome/Kconfig
@@ -119,6 +119,16 @@ config CROS_EC_SPI
response time cannot be guaranteed, we support ignoring
'pre-amble' bytes before the response actually starts.
+config CROS_EC_UART
+ tristate "ChromeOS Embedded Controller (UART)"
+ depends on CROS_EC && ACPI && SERIAL_DEV_BUS
+ help
+ If you say Y here, you get support for talking to the ChromeOS EC
+ through a UART, using a byte-level protocol.
+
+ To compile this driver as a module, choose M here: the
+ module will be called cros_ec_uart.
+
config CROS_EC_LPC
tristate "ChromeOS Embedded Controller (LPC)"
depends on CROS_EC && ACPI && (X86 || COMPILE_TEST)
diff --git a/drivers/platform/chrome/Makefile b/drivers/platform/chrome/Makefile
index 2950610101f15..6f5b6f01940db 100644
--- a/drivers/platform/chrome/Makefile
+++ b/drivers/platform/chrome/Makefile
@@ -15,6 +15,7 @@ obj-$(CONFIG_CROS_EC_ISHTP) += cros_ec_ishtp.o
obj-$(CONFIG_CROS_TYPEC_SWITCH) += cros_typec_switch.o
obj-$(CONFIG_CROS_EC_RPMSG) += cros_ec_rpmsg.o
obj-$(CONFIG_CROS_EC_SPI) += cros_ec_spi.o
+obj-$(CONFIG_CROS_EC_UART) += cros_ec_uart.o
cros_ec_lpcs-objs := cros_ec_lpc.o cros_ec_lpc_mec.o
obj-$(CONFIG_CROS_EC_TYPEC) += cros_ec_typec.o
obj-$(CONFIG_CROS_EC_LPC) += cros_ec_lpcs.o
diff --git a/drivers/platform/chrome/cros_ec_uart.c b/drivers/platform/chrome/cros_ec_uart.c
new file mode 100644
index 0000000000000..ef9ac7ace04b6
--- /dev/null
+++ b/drivers/platform/chrome/cros_ec_uart.c
@@ -0,0 +1,411 @@
+// SPDX-License-Identifier: GPL-2.0-only
+/*
+ * UART interface for ChromeOS Embedded Controller
+ *
+ * Copyright 2020-2022 Google LLC.
+ */
+
+#include <linux/acpi.h>
+#include <linux/delay.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_data/cros_ec_commands.h>
+#include <linux/platform_data/cros_ec_proto.h>
+#include <linux/serdev.h>
+#include <linux/slab.h>
+#include <uapi/linux/sched/types.h>
+
+#include "cros_ec.h"
+
+/*
+ * EC sends contiguous bytes of response packet on UART AP RX.
+ * TTY driver in AP accumulates incoming bytes and calls the registered callback
+ * function. Byte count can range from 1 to MAX bytes supported by EC.
+ * This driver should wait for long time for all callbacks to be processed.
+ * Considering the worst case scenario, wait for 500 msec. This timeout should
+ * account for max latency and some additional guard time.
+ * Best case: Entire packet is received in ~200 ms, wait queue will be released
+ * and packet will be processed.
+ * Worst case: TTY driver sends bytes in multiple callbacks. In this case this
+ * driver will wait for ~1 sec beyond which it will timeout.
+ * This timeout value should not exceed ~500 msec because in case if
+ * EC_CMD_REBOOT_EC sent, high level driver should be able to intercept EC
+ * in RO.
+ */
+#define EC_MSG_DEADLINE_MS 500
+
+/**
+ * struct response_info - Encapsulate EC response related
+ * information for passing between function
+ * cros_ec_uart_pkt_xfer() and cros_ec_uart_rx_bytes()
+ * callback.
+ * @data: Copy the data received from EC here.
+ * @max_size: Max size allocated for the @data buffer. If the
+ * received data exceeds this value, we log an error.
+ * @size: Actual size of data received from EC. This is also
+ * used to accumulate byte count with response is received
+ * in dma chunks.
+ * @exp_len: Expected bytes of response from EC including header.
+ * @error: 0 for success, negative error code for a failure.
+ * @received: Set to true on receiving a valid EC response.
+ * @wait_queue: Wait queue EC response where the cros_ec sends request
+ * to EC and waits
+ */
+struct response_info {
+ void *data;
+ size_t max_size;
+ size_t size;
+ size_t exp_len;
+ int error;
+ bool received;
+ wait_queue_head_t wait_queue;
+};
+
+/**
+ * struct cros_ec_uart - information about a uart-connected EC
+ *
+ * @serdev_device: serdev uart device we are connected to.
+ * @baudrate: UART baudrate of attached EC device.
+ * @flowcontrol: UART flowcontrol of attached device.
+ * @irq: Linux IRQ number of associated serial device.
+ * @response: Response info passing between cros_ec_uart_pkt_xfer()
+ * and cros_ec_uart_rx_bytes()
+ */
+struct cros_ec_uart {
+ struct serdev_device *serdev;
+ u32 baudrate;
+ u8 flowcontrol;
+ u32 irq;
+ struct response_info response;
+};
+
+static int cros_ec_uart_rx_bytes(struct serdev_device *serdev,
+ const u8 *data,
+ size_t count)
+{
+ struct ec_host_response *response;
+ struct cros_ec_device *ec_dev = serdev_device_get_drvdata(serdev);
+ struct cros_ec_uart *ec_uart = ec_dev->priv;
+
+ /* Check if bytes were sent out of band */
+ if (!ec_uart->response.data)
+ /* Discard all bytes */
+ return count;
+
+ /*
+ * Check if incoming bytes + response.size are less than allocated
+ * buffer in din by cros_ec. This will ensure that if EC sends more
+ * bytes than max_size, waiting process will be notified with an error.
+ */
+ if (ec_uart->response.size + count <= ec_uart->response.max_size) {
+ /* Copy bytes in data in buffer */
+ memcpy((void *)ec_uart->response.data + ec_uart->response.size,
+ (void *)data, count);
+
+ /* Add incoming bytes in size */
+ ec_uart->response.size += count;
+
+ /*
+ * Read data_len if we received response header and if exp_len
+ * was not read before.
+ */
+ if (ec_uart->response.size >= sizeof(*response) &&
+ ec_uart->response.exp_len == 0) {
+ /* Get expected response length from response header */
+ response = (struct ec_host_response *)
+ ec_uart->response.data;
+
+ ec_uart->response.exp_len = response->data_len +
+ sizeof(*response);
+ }
+
+ /*
+ * If driver received response header and payload from EC,
+ * Wake up the wait queue.
+ */
+ if (ec_uart->response.size >= sizeof(*response) &&
+ ec_uart->response.size == ec_uart->response.exp_len) {
+ /* Set flag before waking up the caller */
+ ec_uart->response.received = true;
+
+ /* Wake the calling thread */
+ wake_up_interruptible(&ec_uart->response.wait_queue);
+ }
+ } else {
+ /* Received bytes are more the allocated buffer*/
+ ec_uart->response.error = -EMSGSIZE;
+
+ /* Wake the calling thread */
+ wake_up_interruptible(&ec_uart->response.wait_queue);
+ }
+
+ return count;
+}
+
+static int cros_ec_uart_pkt_xfer(struct cros_ec_device *ec_dev,
+ struct cros_ec_command *ec_msg)
+{
+ struct cros_ec_uart *ec_uart = ec_dev->priv;
+ struct serdev_device *serdev = ec_uart->serdev;
+ struct ec_host_response *response;
+ unsigned int len;
+ int ret, i;
+ u8 sum = 0;
+
+ /* Prepare an outgoing message in the output buffer */
+ len = cros_ec_prepare_tx(ec_dev, ec_msg);
+ dev_dbg(ec_dev->dev, "Prepared len=%d\n", len);
+
+ /* Setup for incoming response */
+ ec_uart->response.data = ec_dev->din;
+ ec_uart->response.max_size = ec_dev->din_size;
+ ec_uart->response.size = 0;
+ ec_uart->response.error = 0;
+ ec_uart->response.exp_len = 0;
+ ec_uart->response.received = false;
+
+ /* Write serial device buffer */
+ ret = serdev_device_write_buf(serdev, ec_dev->dout, len);
+ if (ret < len) {
+ dev_err(ec_dev->dev, "Unable to write data");
+
+ /* Return EIO as controller had issues writing buffer */
+ ret = -EIO;
+ goto exit;
+ }
+
+ /* Once request is successfully sent to EC, wait to wait_queue */
+ wait_event_interruptible_timeout(ec_uart->response.wait_queue,
+ ec_uart->response.received,
+ msecs_to_jiffies(EC_MSG_DEADLINE_MS));
+
+ /* Check if wait_queue was interrupted due to an error */
+ if (ec_uart->response.error < 0) {
+ dev_warn(ec_dev->dev, "Response error detected.\n");
+
+ ret = ec_uart->response.error;
+ goto exit;
+ }
+
+ /* Check if valid response was received or there was a timeout */
+ if (!ec_uart->response.received) {
+ dev_warn(ec_dev->dev, "EC failed to respond in time.\n");
+
+ ret = -ETIMEDOUT;
+ goto exit;
+ }
+
+ /* Check response error code */
+ response = (struct ec_host_response *)ec_dev->din;
+ ec_msg->result = response->result;
+
+ /* Check if received response is longer than expected */
+ if (response->data_len > ec_msg->insize) {
+ dev_err(ec_dev->dev, "Resp too long (%d bytes, expected %d)",
+ response->data_len,
+ ec_msg->insize);
+ ret = -ENOSPC;
+ goto exit;
+ }
+
+ /* Validate checksum */
+ for (i = 0; i < sizeof(*response) + response->data_len; i++)
+ sum += ec_dev->din[i];
+
+ if (sum) {
+ dev_err(ec_dev->dev,
+ "Bad packet checksum calculated %x\n",
+ sum);
+ ret = -EBADMSG;
+ goto exit;
+ }
+
+ /* Copy response packet to ec_msg data buffer */
+ memcpy(ec_msg->data,
+ ec_dev->din + sizeof(*response),
+ response->data_len);
+
+ /* Return data_len to cros_ec */
+ ret = response->data_len;
+
+exit:
+ /* Reset ec_uart */
+ ec_uart->response.data = NULL;
+ ec_uart->response.max_size = 0;
+ ec_uart->response.size = 0;
+ ec_uart->response.error = 0;
+ ec_uart->response.exp_len = 0;
+ ec_uart->response.received = false;
+
+ if (ec_msg->command == EC_CMD_REBOOT_EC)
+ msleep(EC_REBOOT_DELAY_MS);
+
+ return ret;
+}
+
+static int cros_ec_uart_resource(struct acpi_resource *ares, void *data)
+{
+ struct cros_ec_uart *ec_uart = data;
+ struct acpi_resource_uart_serialbus *sb;
+
+ switch (ares->type) {
+ case ACPI_RESOURCE_TYPE_SERIAL_BUS:
+ sb = &ares->data.uart_serial_bus;
+ if (sb->type == ACPI_RESOURCE_SERIAL_TYPE_UART) {
+ ec_uart->baudrate = sb->default_baud_rate;
+ dev_dbg(&ec_uart->serdev->dev, "Baudrate %d\n",
+ ec_uart->baudrate);
+
+ ec_uart->flowcontrol = sb->flow_control;
+ dev_dbg(&ec_uart->serdev->dev, "Flow control %d\n",
+ ec_uart->flowcontrol);
+ }
+ break;
+ default:
+ break;
+ }
+
+ return 0;
+}
+
+static int cros_ec_uart_acpi_probe(struct cros_ec_uart *ec_uart)
+{
+ LIST_HEAD(resources);
+ struct acpi_device *adev = ACPI_COMPANION(&ec_uart->serdev->dev);
+ int ret;
+
+ /* Retrieve UART ACPI info */
+ ret = acpi_dev_get_resources(adev, &resources,
+ cros_ec_uart_resource, ec_uart);
+ if (ret < 0)
+ return ret;
+
+ acpi_dev_free_resource_list(&resources);
+
+ /* Retrieve GpioInt and translate it to Linux IRQ number */
+ ret = acpi_dev_gpio_irq_get(adev, 0);
+ if (ret < 0)
+ return ret;
+
+ ec_uart->irq = ret;
+ dev_dbg(&ec_uart->serdev->dev, "IRQ number %d\n", ec_uart->irq);
+
+ return 0;
+}
+
+static const struct serdev_device_ops cros_ec_uart_client_ops = {
+ .receive_buf = cros_ec_uart_rx_bytes,
+};
+
+static int cros_ec_uart_probe(struct serdev_device *serdev)
+{
+ struct device *dev = &serdev->dev;
+ struct cros_ec_device *ec_dev;
+ struct cros_ec_uart *ec_uart;
+ int ret;
+
+ ec_uart = devm_kzalloc(dev, sizeof(*ec_uart), GFP_KERNEL);
+ if (!ec_uart)
+ return -ENOMEM;
+
+ ec_dev = devm_kzalloc(dev, sizeof(*ec_dev), GFP_KERNEL);
+ if (!ec_dev)
+ return -ENOMEM;
+
+ ec_uart->serdev = serdev;
+
+ /* Open the serial device */
+ ret = devm_serdev_device_open(dev, ec_uart->serdev);
+ if (ret) {
+ dev_err(dev, "Unable to open UART device");
+ return ret;
+ }
+
+ serdev_device_set_drvdata(serdev, ec_dev);
+
+ serdev_device_set_client_ops(serdev, &cros_ec_uart_client_ops);
+
+ /* Initialize wait queue */
+ init_waitqueue_head(&ec_uart->response.wait_queue);
+
+ ret = cros_ec_uart_acpi_probe(ec_uart);
+ if (ret < 0) {
+ dev_err(dev, "Failed to get ACPI info (%d)", ret);
+ return ret;
+ }
+
+ /* Set baud rate of serial device */
+ ret = serdev_device_set_baudrate(serdev, ec_uart->baudrate);
+ if (ret < 0) {
+ dev_err(dev, "Failed to set up host baud rate (%d)", ret);
+ return ret;
+ }
+
+ /* Set flow control of serial device */
+ serdev_device_set_flow_control(serdev, ec_uart->flowcontrol);
+
+ /* Initialize ec_dev for cros_ec */
+ ec_dev->phys_name = dev_name(dev);
+ ec_dev->dev = dev;
+ ec_dev->priv = ec_uart;
+ ec_dev->irq = ec_uart->irq;
+ ec_dev->cmd_xfer = NULL;
+ ec_dev->pkt_xfer = cros_ec_uart_pkt_xfer;
+ ec_dev->din_size = sizeof(struct ec_host_response) +
+ sizeof(struct ec_response_get_protocol_info);
+ ec_dev->dout_size = sizeof(struct ec_host_request);
+
+ /* Register a new cros_ec device */
+ return cros_ec_register(ec_dev);
+}
+
+static void cros_ec_uart_remove(struct serdev_device *serdev)
+{
+ struct cros_ec_device *ec_dev = serdev_device_get_drvdata(serdev);
+
+ cros_ec_unregister(ec_dev);
+};
+
+static int __maybe_unused cros_ec_uart_suspend(struct device *dev)
+{
+ struct cros_ec_device *ec_dev = dev_get_drvdata(dev);
+
+ return cros_ec_suspend(ec_dev);
+}
+
+static int __maybe_unused cros_ec_uart_resume(struct device *dev)
+{
+ struct cros_ec_device *ec_dev = dev_get_drvdata(dev);
+
+ return cros_ec_resume(ec_dev);
+}
+
+static SIMPLE_DEV_PM_OPS(cros_ec_uart_pm_ops, cros_ec_uart_suspend,
+ cros_ec_uart_resume);
+
+#ifdef CONFIG_ACPI
+static const struct acpi_device_id cros_ec_uart_acpi_id[] = {
+ { "GOOG0019", 0 },
+ { /* sentinel */ }
+};
+
+MODULE_DEVICE_TABLE(acpi, cros_ec_uart_acpi_id);
+#endif
+
+static struct serdev_device_driver cros_ec_uart_driver = {
+ .driver = {
+ .name = "cros-ec-uart",
+ .acpi_match_table = ACPI_PTR(cros_ec_uart_acpi_id),
+ .pm = &cros_ec_uart_pm_ops,
+ },
+ .probe = cros_ec_uart_probe,
+ .remove = cros_ec_uart_remove,
+};
+
+module_serdev_device_driver(cros_ec_uart_driver);
+
+MODULE_LICENSE("GPL");
+MODULE_DESCRIPTION("UART interface for ChromeOS Embedded Controller");
+MODULE_AUTHOR("Bhanu Prakash Maiya <[email protected]>");
--
2.38.1.584.g0f3c55d4c2-goog
On Wed, Nov 30, 2022 at 01:12:54PM -0700, Mark Hasemeyer wrote:
> This patch does following:
> 1. Adds a new cros-ec-uart driver. This driver can send EC requests on
> UART and process response packets received on UART transport.
[...]
>
> Signed-off-by: Bhanu Prakash Maiya <[email protected]>
> Signed-off-by: Mark Hasemeyer <[email protected]>
Overall the series looks good to me. I would defer it for a while for
people in the mailing list to review and queue it for next next merge
window (i.e. for 6.3).
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 2585e7edc3358..8ed08316fd11e 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -4918,6 +4918,13 @@ S: Maintained
> F: Documentation/devicetree/bindings/sound/google,cros-ec-codec.yaml
> F: sound/soc/codecs/cros_ec_codec.*
>
> +CHROMEOS EC UART DRIVER
> +M: Bhanu Prakash Maiya <[email protected]>
> +R: Benson Leung <[email protected]>
Looking around the MAINTAINERS file, I am not sure if Benson would
prefer to use chromium.org account.
Hi,
On Wed, Nov 30, 2022 at 12:13 PM Mark Hasemeyer <[email protected]> wrote:
>
> This patch does following:
> 1. Adds a new cros-ec-uart driver. This driver can send EC requests on
> UART and process response packets received on UART transport.
> 2. Once probed, this driver will initialize the serdev device based on
> the underlying information in the ACPI resource. After serdev device
> properties are set, this driver will register itself cros-ec.
> 3. High level driver can use this implementation to talk to ChromeOS
> Embedded Controller device in case it supports UART as transport.
> 4. When cros-ec driver initiates a request packet, outgoing message is
> processed in buffer and sent via serdev. Once bytes are sent, driver
> enables a wait_queue.
> 5. Since ChromeOS EC device sends response asynchronously, AP's TTY
> driver accumulates response bytes and calls the registered callback.
> TTY driver can send multiple callback for bytes ranging from 1 to MAX
> bytes supported by EC device.
> 6. Driver waits for EC_MSG_DEADLINE_MS to collect and process received
> bytes. It wakes wait_queue if expected bytes are received or else
> wait_queue timeout. Based on the error condition, driver returns
> data_len or error to cros_ec.
>
> Signed-off-by: Bhanu Prakash Maiya <[email protected]>
> Signed-off-by: Mark Hasemeyer <[email protected]>
> ---
>
> Changes in v8:
> - Combine for loops used for xsum calculation
> - Use ec_dev->dev instead of serdev->dev
> - Sort includes
> - Swap struct var order to match doc order
> - fix whitespace
> - Update contact information in MAINTAINERS
> - Update copyright date
>
> Changes in v7:
> - Use ACPI ID matching
> - Change MODULE_LICENSE from GPL v2 to GPL
>
> Changes in v6:
> - Tuning EC_MSG_DEADLINE_MS from 1 sec to 500 msec. Since the EC's UART
> response buffer was tuned and redeuced to 256 byte, 500 msec timeout
> should give enough time for 256 bytes to be recieved from SoC UART
> buffer.
>
> Changes in v5:
> - Fixed checkpatch.pl warnings.
>
> Changes in v4:
> - Change EC_MSG_DEADLINE_MS from 3 secs to 1 sec. 3 secs timeout prevents
> driver from intercepting EC in RO stage. In case of request failure, 1
> sec allows driver to retry and send HC when EC is in RO.
> - Add more information in commit message.
>
> Changes in v3:
> - checkpatch.pl script warns about char len 80 even though we have
> relaxed view guideline for line below 100 chars. Currently sticking
> with 80 chars in v3.
> - Fixed style issues
>
> Changes in v2:
> - Fixed build error on v1.
> - Changed EC timeout for response packet to 3 Sec and added comments.
> - Fixed cros_ec_uart_rx_bytes function to handle rx buffer < size of response header.
>
> ---
> MAINTAINERS | 7 +
> drivers/platform/chrome/Kconfig | 10 +
> drivers/platform/chrome/Makefile | 1 +
> drivers/platform/chrome/cros_ec_uart.c | 411 +++++++++++++++++++++++++
> 4 files changed, 429 insertions(+)
> create mode 100644 drivers/platform/chrome/cros_ec_uart.c
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 2585e7edc3358..8ed08316fd11e 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -4918,6 +4918,13 @@ S: Maintained
> F: Documentation/devicetree/bindings/sound/google,cros-ec-codec.yaml
> F: sound/soc/codecs/cros_ec_codec.*
>
> +CHROMEOS EC UART DRIVER
> +M: Bhanu Prakash Maiya <[email protected]>
> +R: Benson Leung <[email protected]>
> +R: Tzung-Bi Shih <[email protected]>
> +S: Maintained
> +F: drivers/platform/chrome/cros_ec_uart.c
> +
> CHROMEOS EC SUBDRIVERS
> M: Benson Leung <[email protected]>
> R: Guenter Roeck <[email protected]>
> diff --git a/drivers/platform/chrome/Kconfig b/drivers/platform/chrome/Kconfig
> index 6b954c5acadb1..d4a95ec261ed3 100644
> --- a/drivers/platform/chrome/Kconfig
> +++ b/drivers/platform/chrome/Kconfig
> @@ -119,6 +119,16 @@ config CROS_EC_SPI
> response time cannot be guaranteed, we support ignoring
> 'pre-amble' bytes before the response actually starts.
>
> +config CROS_EC_UART
> + tristate "ChromeOS Embedded Controller (UART)"
> + depends on CROS_EC && ACPI && SERIAL_DEV_BUS
> + help
> + If you say Y here, you get support for talking to the ChromeOS EC
> + through a UART, using a byte-level protocol.
> +
> + To compile this driver as a module, choose M here: the
> + module will be called cros_ec_uart.
> +
> config CROS_EC_LPC
> tristate "ChromeOS Embedded Controller (LPC)"
> depends on CROS_EC && ACPI && (X86 || COMPILE_TEST)
> diff --git a/drivers/platform/chrome/Makefile b/drivers/platform/chrome/Makefile
> index 2950610101f15..6f5b6f01940db 100644
> --- a/drivers/platform/chrome/Makefile
> +++ b/drivers/platform/chrome/Makefile
> @@ -15,6 +15,7 @@ obj-$(CONFIG_CROS_EC_ISHTP) += cros_ec_ishtp.o
> obj-$(CONFIG_CROS_TYPEC_SWITCH) += cros_typec_switch.o
> obj-$(CONFIG_CROS_EC_RPMSG) += cros_ec_rpmsg.o
> obj-$(CONFIG_CROS_EC_SPI) += cros_ec_spi.o
> +obj-$(CONFIG_CROS_EC_UART) += cros_ec_uart.o
> cros_ec_lpcs-objs := cros_ec_lpc.o cros_ec_lpc_mec.o
> obj-$(CONFIG_CROS_EC_TYPEC) += cros_ec_typec.o
> obj-$(CONFIG_CROS_EC_LPC) += cros_ec_lpcs.o
> diff --git a/drivers/platform/chrome/cros_ec_uart.c b/drivers/platform/chrome/cros_ec_uart.c
> new file mode 100644
> index 0000000000000..ef9ac7ace04b6
> --- /dev/null
> +++ b/drivers/platform/chrome/cros_ec_uart.c
> @@ -0,0 +1,411 @@
> +// SPDX-License-Identifier: GPL-2.0-only
> +/*
> + * UART interface for ChromeOS Embedded Controller
> + *
> + * Copyright 2020-2022 Google LLC.
> + */
> +
> +#include <linux/acpi.h>
> +#include <linux/delay.h>
> +#include <linux/errno.h>
> +#include <linux/init.h>
> +#include <linux/kernel.h>
> +#include <linux/module.h>
> +#include <linux/platform_data/cros_ec_commands.h>
> +#include <linux/platform_data/cros_ec_proto.h>
> +#include <linux/serdev.h>
> +#include <linux/slab.h>
> +#include <uapi/linux/sched/types.h>
> +
> +#include "cros_ec.h"
> +
> +/*
> + * EC sends contiguous bytes of response packet on UART AP RX.
> + * TTY driver in AP accumulates incoming bytes and calls the registered callback
> + * function. Byte count can range from 1 to MAX bytes supported by EC.
> + * This driver should wait for long time for all callbacks to be processed.
> + * Considering the worst case scenario, wait for 500 msec. This timeout should
> + * account for max latency and some additional guard time.
> + * Best case: Entire packet is received in ~200 ms, wait queue will be released
> + * and packet will be processed.
> + * Worst case: TTY driver sends bytes in multiple callbacks. In this case this
> + * driver will wait for ~1 sec beyond which it will timeout.
> + * This timeout value should not exceed ~500 msec because in case if
> + * EC_CMD_REBOOT_EC sent, high level driver should be able to intercept EC
> + * in RO.
> + */
> +#define EC_MSG_DEADLINE_MS 500
> +
> +/**
> + * struct response_info - Encapsulate EC response related
> + * information for passing between function
> + * cros_ec_uart_pkt_xfer() and cros_ec_uart_rx_bytes()
> + * callback.
> + * @data: Copy the data received from EC here.
> + * @max_size: Max size allocated for the @data buffer. If the
> + * received data exceeds this value, we log an error.
> + * @size: Actual size of data received from EC. This is also
> + * used to accumulate byte count with response is received
> + * in dma chunks.
> + * @exp_len: Expected bytes of response from EC including header.
> + * @error: 0 for success, negative error code for a failure.
> + * @received: Set to true on receiving a valid EC response.
> + * @wait_queue: Wait queue EC response where the cros_ec sends request
> + * to EC and waits
> + */
> +struct response_info {
> + void *data;
> + size_t max_size;
> + size_t size;
> + size_t exp_len;
> + int error;
> + bool received;
> + wait_queue_head_t wait_queue;
> +};
> +
> +/**
> + * struct cros_ec_uart - information about a uart-connected EC
> + *
> + * @serdev_device: serdev uart device we are connected to.
> + * @baudrate: UART baudrate of attached EC device.
> + * @flowcontrol: UART flowcontrol of attached device.
> + * @irq: Linux IRQ number of associated serial device.
> + * @response: Response info passing between cros_ec_uart_pkt_xfer()
> + * and cros_ec_uart_rx_bytes()
> + */
> +struct cros_ec_uart {
> + struct serdev_device *serdev;
> + u32 baudrate;
> + u8 flowcontrol;
> + u32 irq;
> + struct response_info response;
> +};
> +
> +static int cros_ec_uart_rx_bytes(struct serdev_device *serdev,
> + const u8 *data,
> + size_t count)
> +{
> + struct ec_host_response *response;
> + struct cros_ec_device *ec_dev = serdev_device_get_drvdata(serdev);
> + struct cros_ec_uart *ec_uart = ec_dev->priv;
> +
> + /* Check if bytes were sent out of band */
> + if (!ec_uart->response.data)
> + /* Discard all bytes */
> + return count;
> +
> + /*
> + * Check if incoming bytes + response.size are less than allocated
> + * buffer in din by cros_ec. This will ensure that if EC sends more
> + * bytes than max_size, waiting process will be notified with an error.
> + */
Please try to avoid over-commenting (here and elsewhere in the file)
[1]; it shouldn't
be necessary to comment every block of code, where the intention can be surmised
purely by looking at the code.
> + if (ec_uart->response.size + count <= ec_uart->response.max_size) {
> + /* Copy bytes in data in buffer */
This comment seems unnecessary.
> + memcpy((void *)ec_uart->response.data + ec_uart->response.size,
> + (void *)data, count);
> +
> + /* Add incoming bytes in size */
> + ec_uart->response.size += count;
> +
> + /*
> + * Read data_len if we received response header and if exp_len
> + * was not read before.
> + */
> + if (ec_uart->response.size >= sizeof(*response) &&
> + ec_uart->response.exp_len == 0) {
> + /* Get expected response length from response header */
> + response = (struct ec_host_response *)
> + ec_uart->response.data;
> +
> + ec_uart->response.exp_len = response->data_len +
> + sizeof(*response);
> + }
> +
> + /*
> + * If driver received response header and payload from EC,
> + * Wake up the wait queue.
> + */
> + if (ec_uart->response.size >= sizeof(*response) &&
> + ec_uart->response.size == ec_uart->response.exp_len) {
> + /* Set flag before waking up the caller */
> + ec_uart->response.received = true;
> +
> + /* Wake the calling thread */
> + wake_up_interruptible(&ec_uart->response.wait_queue);
> + }
You can save 1 level of indentation by inverting the if block and making it a
guard clause:
if (ec_uart->response_size + count > ec_uart->response_max_size) {
ec_uart->response.error = -EMSGSIZE;
wake_up_interruptible(...);
return;
}
memcpy(...);
ec_uart->response.size += count;
> + } else {
> + /* Received bytes are more the allocated buffer*/
> + ec_uart->response.error = -EMSGSIZE;
> +
> + /* Wake the calling thread */
Same issue as earlier. There is no need to add a comment for single lines
like these where what is happening is obvious.
> + wake_up_interruptible(&ec_uart->response.wait_queue);
> + }
> +
> + return count;
> +}
> +
> +static int cros_ec_uart_pkt_xfer(struct cros_ec_device *ec_dev,
> + struct cros_ec_command *ec_msg)
> +{
> + struct cros_ec_uart *ec_uart = ec_dev->priv;
> + struct serdev_device *serdev = ec_uart->serdev;
> + struct ec_host_response *response;
> + unsigned int len;
> + int ret, i;
> + u8 sum = 0;
> +
> + /* Prepare an outgoing message in the output buffer */
Superfluous comment.
> + len = cros_ec_prepare_tx(ec_dev, ec_msg);
> + dev_dbg(ec_dev->dev, "Prepared len=%d\n", len);
> +
> + /* Setup for incoming response */
> + ec_uart->response.data = ec_dev->din;
> + ec_uart->response.max_size = ec_dev->din_size;
> + ec_uart->response.size = 0;
> + ec_uart->response.error = 0;
> + ec_uart->response.exp_len = 0;
> + ec_uart->response.received = false;
> +
> + /* Write serial device buffer */
Superfluous comment.
> + ret = serdev_device_write_buf(serdev, ec_dev->dout, len);
> + if (ret < len) {
> + dev_err(ec_dev->dev, "Unable to write data");
> +
> + /* Return EIO as controller had issues writing buffer */
> + ret = -EIO;
> + goto exit;
> + }
> +
> + /* Once request is successfully sent to EC, wait to wait_queue */
> + wait_event_interruptible_timeout(ec_uart->response.wait_queue,
> + ec_uart->response.received,
> + msecs_to_jiffies(EC_MSG_DEADLINE_MS));
wait_event_interruptible_timeout() returns a value indicating if a
timeout occurred
and/or if the condition evaluated to true[3]. Can that not be used here, instead
of re-writing the timeout/error check mechanism?
> +
> + /* Check if wait_queue was interrupted due to an error */
> + if (ec_uart->response.error < 0) {
> + dev_warn(ec_dev->dev, "Response error detected.\n");
> +
> + ret = ec_uart->response.error;
> + goto exit;
> + }
> +
> + /* Check if valid response was received or there was a timeout */
> + if (!ec_uart->response.received) {
> + dev_warn(ec_dev->dev, "EC failed to respond in time.\n");
> +
> + ret = -ETIMEDOUT;
> + goto exit;
> + }
> +
> + /* Check response error code */
> + response = (struct ec_host_response *)ec_dev->din;
> + ec_msg->result = response->result;
> +
> + /* Check if received response is longer than expected */
> + if (response->data_len > ec_msg->insize) {
> + dev_err(ec_dev->dev, "Resp too long (%d bytes, expected %d)",
> + response->data_len,
> + ec_msg->insize);
> + ret = -ENOSPC;
> + goto exit;
> + }
> +
> + /* Validate checksum */
> + for (i = 0; i < sizeof(*response) + response->data_len; i++)
> + sum += ec_dev->din[i];
> +
> + if (sum) {
> + dev_err(ec_dev->dev,
> + "Bad packet checksum calculated %x\n",
> + sum);
Line length allowances are 100 chars now [2]. I think this should fit on 1 line.
> + ret = -EBADMSG;
> + goto exit;
> + }
> +
> + /* Copy response packet to ec_msg data buffer */
Superfluous comment.
> + memcpy(ec_msg->data,
> + ec_dev->din + sizeof(*response),
> + response->data_len);
> +
> + /* Return data_len to cros_ec */
> + ret = response->data_len;
> +
> +exit:
> + /* Reset ec_uart */
> + ec_uart->response.data = NULL;
> + ec_uart->response.max_size = 0;
> + ec_uart->response.size = 0;
> + ec_uart->response.error = 0;
> + ec_uart->response.exp_len = 0;
> + ec_uart->response.received = false;
Sorry if I'm missing something, but are you expecting some other access to these
variables (before the next call to cros_ec_uart_pkt_xfer()) ?
If not, we shouldn't need to reset everything here (re-initializing it
on the next
call to cros_ec_uart_pkt_xfer() should be sufficient)
> +
> + if (ec_msg->command == EC_CMD_REBOOT_EC)
> + msleep(EC_REBOOT_DELAY_MS);
> +
> + return ret;
> +}
> +
> +static int cros_ec_uart_resource(struct acpi_resource *ares, void *data)
> +{
> + struct cros_ec_uart *ec_uart = data;
> + struct acpi_resource_uart_serialbus *sb;
> +
> + switch (ares->type) {
> + case ACPI_RESOURCE_TYPE_SERIAL_BUS:
> + sb = &ares->data.uart_serial_bus;
> + if (sb->type == ACPI_RESOURCE_SERIAL_TYPE_UART) {
> + ec_uart->baudrate = sb->default_baud_rate;
> + dev_dbg(&ec_uart->serdev->dev, "Baudrate %d\n",
> + ec_uart->baudrate);
> +
> + ec_uart->flowcontrol = sb->flow_control;
> + dev_dbg(&ec_uart->serdev->dev, "Flow control %d\n",
> + ec_uart->flowcontrol);
> + }
> + break;
> + default:
> + break;
> + }
Is a switch necessary here? An if statement could accomplish the same thing
struct cros_ec_uart *ec_uart = data;
struct acpi_resource_uart_serialbus *sb = &ares->data.uart_serial_bus;
if (ares->type == ACPI_RESOURCE_TYPEC_SERIAL_BUS &&
sb->type == ACPI_RESOURCE_SERIAL_TYPE_UART) {
ec_uart->baudrate = sb->default_baud_rate;
....
}
> +
> + return 0;
> +}
> +
> +static int cros_ec_uart_acpi_probe(struct cros_ec_uart *ec_uart)
> +{
> + LIST_HEAD(resources);
> + struct acpi_device *adev = ACPI_COMPANION(&ec_uart->serdev->dev);
> + int ret;
It's not a strict requirement, but it's always nice to list the
initializer list in decreasing (or
increasing) order of line length;
> +
> + /* Retrieve UART ACPI info */
Unnecessary comment.
> + ret = acpi_dev_get_resources(adev, &resources,
> + cros_ec_uart_resource, ec_uart);
> + if (ret < 0)
> + return ret;
> +
> + acpi_dev_free_resource_list(&resources);
> +
> + /* Retrieve GpioInt and translate it to Linux IRQ number */
> + ret = acpi_dev_gpio_irq_get(adev, 0);
> + if (ret < 0)
> + return ret;
> +
> + ec_uart->irq = ret;
> + dev_dbg(&ec_uart->serdev->dev, "IRQ number %d\n", ec_uart->irq);
> +
> + return 0;
> +}
> +
> +static const struct serdev_device_ops cros_ec_uart_client_ops = {
> + .receive_buf = cros_ec_uart_rx_bytes,
> +};
> +
> +static int cros_ec_uart_probe(struct serdev_device *serdev)
> +{
> + struct device *dev = &serdev->dev;
> + struct cros_ec_device *ec_dev;
> + struct cros_ec_uart *ec_uart;
> + int ret;
> +
> + ec_uart = devm_kzalloc(dev, sizeof(*ec_uart), GFP_KERNEL);
> + if (!ec_uart)
> + return -ENOMEM;
> +
> + ec_dev = devm_kzalloc(dev, sizeof(*ec_dev), GFP_KERNEL);
> + if (!ec_dev)
> + return -ENOMEM;
> +
> + ec_uart->serdev = serdev;
> +
> + /* Open the serial device */
> + ret = devm_serdev_device_open(dev, ec_uart->serdev);
> + if (ret) {
> + dev_err(dev, "Unable to open UART device");
> + return ret;
> + }
> +
> + serdev_device_set_drvdata(serdev, ec_dev);
> +
Unnecessary newline.
> + serdev_device_set_client_ops(serdev, &cros_ec_uart_client_ops);
> +
> + /* Initialize wait queue */
> + init_waitqueue_head(&ec_uart->response.wait_queue);
> +
> + ret = cros_ec_uart_acpi_probe(ec_uart);
> + if (ret < 0) {
> + dev_err(dev, "Failed to get ACPI info (%d)", ret);
> + return ret;
> + }
> +
> + /* Set baud rate of serial device */
> + ret = serdev_device_set_baudrate(serdev, ec_uart->baudrate);
> + if (ret < 0) {
> + dev_err(dev, "Failed to set up host baud rate (%d)", ret);
> + return ret;
> + }
> +
> + /* Set flow control of serial device */
> + serdev_device_set_flow_control(serdev, ec_uart->flowcontrol);
> +
> + /* Initialize ec_dev for cros_ec */
> + ec_dev->phys_name = dev_name(dev);
> + ec_dev->dev = dev;
> + ec_dev->priv = ec_uart;
> + ec_dev->irq = ec_uart->irq;
> + ec_dev->cmd_xfer = NULL;
> + ec_dev->pkt_xfer = cros_ec_uart_pkt_xfer;
> + ec_dev->din_size = sizeof(struct ec_host_response) +
> + sizeof(struct ec_response_get_protocol_info);
> + ec_dev->dout_size = sizeof(struct ec_host_request);
> +
> + /* Register a new cros_ec device */
> + return cros_ec_register(ec_dev);
> +}
> +
> +static void cros_ec_uart_remove(struct serdev_device *serdev)
> +{
> + struct cros_ec_device *ec_dev = serdev_device_get_drvdata(serdev);
> +
> + cros_ec_unregister(ec_dev);
> +};
> +
> +static int __maybe_unused cros_ec_uart_suspend(struct device *dev)
> +{
> + struct cros_ec_device *ec_dev = dev_get_drvdata(dev);
> +
> + return cros_ec_suspend(ec_dev);
> +}
> +
> +static int __maybe_unused cros_ec_uart_resume(struct device *dev)
> +{
> + struct cros_ec_device *ec_dev = dev_get_drvdata(dev);
> +
> + return cros_ec_resume(ec_dev);
> +}
> +
> +static SIMPLE_DEV_PM_OPS(cros_ec_uart_pm_ops, cros_ec_uart_suspend,
> + cros_ec_uart_resume);
> +
> +#ifdef CONFIG_ACPI
> +static const struct acpi_device_id cros_ec_uart_acpi_id[] = {
> + { "GOOG0019", 0 },
> + { /* sentinel */ }
> +};
> +
> +MODULE_DEVICE_TABLE(acpi, cros_ec_uart_acpi_id);
> +#endif
> +
> +static struct serdev_device_driver cros_ec_uart_driver = {
> + .driver = {
> + .name = "cros-ec-uart",
> + .acpi_match_table = ACPI_PTR(cros_ec_uart_acpi_id),
> + .pm = &cros_ec_uart_pm_ops,
> + },
> + .probe = cros_ec_uart_probe,
> + .remove = cros_ec_uart_remove,
> +};
> +
> +module_serdev_device_driver(cros_ec_uart_driver);
> +
> +MODULE_LICENSE("GPL");
> +MODULE_DESCRIPTION("UART interface for ChromeOS Embedded Controller");
> +MODULE_AUTHOR("Bhanu Prakash Maiya <[email protected]>");
> --
> 2.38.1.584.g0f3c55d4c2-goog
>
>
Best regards,
[1] https://www.kernel.org/doc/html/latest/process/coding-style.html#commenting
[2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=bdc48fa11e46f867ea4d75fa59ee87a7f48be144
[3] https://elixir.bootlin.com/linux/v6.1-rc7/source/include/linux/wait.h#L510
Sorry, one other thing:
On Thu, Dec 1, 2022 at 1:12 PM Prashant Malani <[email protected]> wrote:
>
> Hi,
>
> On Wed, Nov 30, 2022 at 12:13 PM Mark Hasemeyer <[email protected]> wrote:
> >
> > This patch does following:
> > 1. Adds a new cros-ec-uart driver. This driver can send EC requests on
> > UART and process response packets received on UART transport.
> > 2. Once probed, this driver will initialize the serdev device based on
> > the underlying information in the ACPI resource. After serdev device
> > properties are set, this driver will register itself cros-ec.
> > 3. High level driver can use this implementation to talk to ChromeOS
> > Embedded Controller device in case it supports UART as transport.
> > 4. When cros-ec driver initiates a request packet, outgoing message is
> > processed in buffer and sent via serdev. Once bytes are sent, driver
> > enables a wait_queue.
> > 5. Since ChromeOS EC device sends response asynchronously, AP's TTY
> > driver accumulates response bytes and calls the registered callback.
> > TTY driver can send multiple callback for bytes ranging from 1 to MAX
> > bytes supported by EC device.
> > 6. Driver waits for EC_MSG_DEADLINE_MS to collect and process received
> > bytes. It wakes wait_queue if expected bytes are received or else
> > wait_queue timeout. Based on the error condition, driver returns
> > data_len or error to cros_ec.
> >
> > Signed-off-by: Bhanu Prakash Maiya <[email protected]>
> > Signed-off-by: Mark Hasemeyer <[email protected]>
It is not clear who is the author of this patch. I'm guessing it is
Mark Hasemayer, since
they're the sender, but in that case their Signed-off-by tag should be
first [4].
If it is Bhanu Prakash Maiya, then the git commit should list them as
the author.
Also note that for patches which are developed by > 1 person,
Co-developed-by is an option
to share attribution.
> [1] https://www.kernel.org/doc/html/latest/process/coding-style.html#commenting
> [2] https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/commit/?id=bdc48fa11e46f867ea4d75fa59ee87a7f48be144
> [3] https://elixir.bootlin.com/linux/v6.1-rc7/source/include/linux/wait.h#L510
[4] https://www.kernel.org/doc/html/latest/process/submitting-patches.html?highlight=signed%20off#sign-your-work-the-developer-s-certificate-of-origin
> + /* Received bytes are more the allocated buffer*/
> + ec_uart->response.error = -EMSGSIZE;
> +
> + /* Wake the calling thread */
> + wake_up_interruptible(&ec_uart->response.wait_queue);
I believe the "received" conditional variable should be set before calling
wake_up_interruptible. Otherwise the calling thread will not be (immediately)
awakened as the condition is still false. Currently, the calling thread will
wait until it times out in this case.