From: Jeff Xu <[email protected]>
The new MFD_NOEXEC_SEAL and MFD_EXEC flags allows application to
set executable bit at creation time (memfd_create).
When MFD_NOEXEC_SEAL is set, memfd is created without executable bit
(mode:0666), and sealed with F_SEAL_EXEC, so it can't be chmod to
be executable (mode: 0777) after creation.
when MFD_EXEC flag is set, memfd is created with executable bit
(mode:0777), this is the same as the old behavior of memfd_create.
The new pid namespaced sysctl vm.memfd_noexec has 3 values:
0: memfd_create() without MFD_EXEC nor MFD_NOEXEC_SEAL acts like
MFD_EXEC was set.
1: memfd_create() without MFD_EXEC nor MFD_NOEXEC_SEAL acts like
MFD_NOEXEC_SEAL was set.
2:memfd_create() without MFD_NOEXEC_SEAL will be rejected.
The sysctl allows finer control of memfd_create for old-software
that doesn't set the executable bit, for example, a container with
vm.memfd_noexec=1 means the old-software will create non-executable
memfd by default.
Co-developed-by: Daniel Verkamp <[email protected]>
Signed-off-by: Daniel Verkamp <[email protected]>
Signed-off-by: Jeff Xu <[email protected]>
---
include/linux/pid_namespace.h | 19 ++++++++++++++
include/uapi/linux/memfd.h | 4 +++
kernel/pid_namespace.c | 47 +++++++++++++++++++++++++++++++++++
mm/memfd.c | 44 ++++++++++++++++++++++++++++++--
4 files changed, 112 insertions(+), 2 deletions(-)
diff --git a/include/linux/pid_namespace.h b/include/linux/pid_namespace.h
index 07481bb87d4e..a4789a7b34a9 100644
--- a/include/linux/pid_namespace.h
+++ b/include/linux/pid_namespace.h
@@ -16,6 +16,21 @@
struct fs_pin;
+#if defined(CONFIG_SYSCTL) && defined(CONFIG_MEMFD_CREATE)
+/*
+ * sysctl for vm.memfd_noexec
+ * 0: memfd_create() without MFD_EXEC nor MFD_NOEXEC_SEAL
+ * acts like MFD_EXEC was set.
+ * 1: memfd_create() without MFD_EXEC nor MFD_NOEXEC_SEAL
+ * acts like MFD_NOEXEC_SEAL was set.
+ * 2: memfd_create() without MFD_NOEXEC_SEAL will be
+ * rejected.
+ */
+#define MEMFD_NOEXEC_SCOPE_EXEC 0
+#define MEMFD_NOEXEC_SCOPE_NOEXEC_SEAL 1
+#define MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED 2
+#endif
+
struct pid_namespace {
struct idr idr;
struct rcu_head rcu;
@@ -31,6 +46,10 @@ struct pid_namespace {
struct ucounts *ucounts;
int reboot; /* group exit code if this pidns was rebooted */
struct ns_common ns;
+#if defined(CONFIG_SYSCTL) && defined(CONFIG_MEMFD_CREATE)
+ /* sysctl for vm.memfd_noexec */
+ int memfd_noexec_scope;
+#endif
} __randomize_layout;
extern struct pid_namespace init_pid_ns;
diff --git a/include/uapi/linux/memfd.h b/include/uapi/linux/memfd.h
index 7a8a26751c23..273a4e15dfcf 100644
--- a/include/uapi/linux/memfd.h
+++ b/include/uapi/linux/memfd.h
@@ -8,6 +8,10 @@
#define MFD_CLOEXEC 0x0001U
#define MFD_ALLOW_SEALING 0x0002U
#define MFD_HUGETLB 0x0004U
+/* not executable and sealed to prevent changing to executable. */
+#define MFD_NOEXEC_SEAL 0x0008U
+/* executable */
+#define MFD_EXEC 0x0010U
/*
* Huge page size encoding when MFD_HUGETLB is specified, and a huge page
diff --git a/kernel/pid_namespace.c b/kernel/pid_namespace.c
index f4f8cb0435b4..71dd9b0a0f62 100644
--- a/kernel/pid_namespace.c
+++ b/kernel/pid_namespace.c
@@ -110,6 +110,10 @@ static struct pid_namespace *create_pid_namespace(struct user_namespace *user_ns
ns->ucounts = ucounts;
ns->pid_allocated = PIDNS_ADDING;
+#if defined(CONFIG_SYSCTL) && defined(CONFIG_MEMFD_CREATE)
+ ns->memfd_noexec_scope = MEMFD_NOEXEC_SCOPE_EXEC;
+#endif
+
return ns;
out_free_idr:
@@ -255,6 +259,45 @@ void zap_pid_ns_processes(struct pid_namespace *pid_ns)
return;
}
+#if defined(CONFIG_SYSCTL) && defined(CONFIG_MEMFD_CREATE)
+int pid_mfd_noexec_dointvec_minmax(struct ctl_table *table, int write,
+ void *buffer, size_t *lenp, loff_t *ppos)
+{
+ struct pid_namespace *ns = task_active_pid_ns(current);
+ struct ctl_table table_copy;
+
+ if (write && !capable(CAP_SYS_ADMIN))
+ return -EPERM;
+
+ table_copy = *table;
+ if (ns != &init_pid_ns)
+ table_copy.data = &ns->memfd_noexec_scope;
+
+ /*
+ * set minimum to current value, the effect is only bigger
+ * value is accepted.
+ */
+ if (*(int *)table_copy.data > *(int *)table_copy.extra1)
+ table_copy.extra1 = table_copy.data;
+
+ return proc_dointvec_minmax(&table_copy, write, buffer, lenp, ppos);
+}
+
+static struct ctl_table pid_ns_ctl_table_vm[] = {
+ {
+ .procname = "memfd_noexec",
+ .data = &init_pid_ns.memfd_noexec_scope,
+ .maxlen = sizeof(init_pid_ns.memfd_noexec_scope),
+ .mode = 0644,
+ .proc_handler = pid_mfd_noexec_dointvec_minmax,
+ .extra1 = SYSCTL_ZERO,
+ .extra2 = SYSCTL_TWO,
+ },
+ { }
+};
+static struct ctl_path vm_path[] = { { .procname = "vm", }, { } };
+#endif
+
#ifdef CONFIG_CHECKPOINT_RESTORE
static int pid_ns_ctl_handler(struct ctl_table *table, int write,
void *buffer, size_t *lenp, loff_t *ppos)
@@ -455,6 +498,10 @@ static __init int pid_namespaces_init(void)
#ifdef CONFIG_CHECKPOINT_RESTORE
register_sysctl_paths(kern_path, pid_ns_ctl_table);
#endif
+
+#if defined(CONFIG_SYSCTL) && defined(CONFIG_MEMFD_CREATE)
+ register_sysctl_paths(vm_path, pid_ns_ctl_table_vm);
+#endif
return 0;
}
diff --git a/mm/memfd.c b/mm/memfd.c
index 4ebeab94aa74..69e897dea6d5 100644
--- a/mm/memfd.c
+++ b/mm/memfd.c
@@ -18,6 +18,7 @@
#include <linux/hugetlb.h>
#include <linux/shmem_fs.h>
#include <linux/memfd.h>
+#include <linux/pid_namespace.h>
#include <uapi/linux/memfd.h>
/*
@@ -263,12 +264,13 @@ long memfd_fcntl(struct file *file, unsigned int cmd, unsigned long arg)
#define MFD_NAME_PREFIX_LEN (sizeof(MFD_NAME_PREFIX) - 1)
#define MFD_NAME_MAX_LEN (NAME_MAX - MFD_NAME_PREFIX_LEN)
-#define MFD_ALL_FLAGS (MFD_CLOEXEC | MFD_ALLOW_SEALING | MFD_HUGETLB)
+#define MFD_ALL_FLAGS (MFD_CLOEXEC | MFD_ALLOW_SEALING | MFD_HUGETLB | MFD_NOEXEC_SEAL | MFD_EXEC)
SYSCALL_DEFINE2(memfd_create,
const char __user *, uname,
unsigned int, flags)
{
+ struct pid_namespace *ns;
unsigned int *file_seals;
struct file *file;
int fd, error;
@@ -285,6 +287,36 @@ SYSCALL_DEFINE2(memfd_create,
return -EINVAL;
}
+ /* Invalid if both EXEC and NOEXEC_SEAL are set.*/
+ if ((flags & MFD_EXEC) && (flags & MFD_NOEXEC_SEAL))
+ return -EINVAL;
+
+ if (!(flags & (MFD_EXEC | MFD_NOEXEC_SEAL))) {
+#ifdef CONFIG_SYSCTL
+ int sysctl = MEMFD_NOEXEC_SCOPE_EXEC;
+
+ ns = task_active_pid_ns(current);
+ if (ns)
+ sysctl = ns->memfd_noexec_scope;
+
+ if (sysctl == MEMFD_NOEXEC_SCOPE_EXEC) {
+ flags |= MFD_EXEC;
+ } else if (sysctl == MEMFD_NOEXEC_SCOPE_NOEXEC_SEAL) {
+ flags |= MFD_NOEXEC_SEAL;
+ } else {
+ pr_warn_ratelimited(
+ "memfd_create(): MFD_NOEXEC_SEAL is enforced, pid=%d\n",
+ task_pid_nr(current));
+ return -EINVAL;
+ }
+#else
+ flags |= MFD_EXEC;
+#endif
+ pr_warn_ratelimited(
+ "memfd_create() without MFD_EXEC nor MFD_NOEXEC_SEAL, pid=%d\n",
+ task_pid_nr(current));
+ }
+
/* length includes terminating zero */
len = strnlen_user(uname, MFD_NAME_MAX_LEN + 1);
if (len <= 0)
@@ -328,7 +360,15 @@ SYSCALL_DEFINE2(memfd_create,
file->f_mode |= FMODE_LSEEK | FMODE_PREAD | FMODE_PWRITE;
file->f_flags |= O_LARGEFILE;
- if (flags & MFD_ALLOW_SEALING) {
+ if (flags & MFD_NOEXEC_SEAL) {
+ struct inode *inode = file_inode(file);
+
+ inode->i_mode &= ~0111;
+ file_seals = memfd_file_seals_ptr(file);
+ *file_seals &= ~F_SEAL_SEAL;
+ *file_seals |= F_SEAL_EXEC;
+ } else if (flags & MFD_ALLOW_SEALING) {
+ /* MFD_EXEC and MFD_ALLOW_SEALING are set */
file_seals = memfd_file_seals_ptr(file);
*file_seals &= ~F_SEAL_SEAL;
}
--
2.39.0.rc0.267.gcb52ba06e7-goog
Hi,
Thank you for the patch! Perhaps something to improve:
[auto build test WARNING on akpm-mm/mm-everything]
url: https://github.com/intel-lab-lkp/linux/commits/jeffxu-chromium-org/mm-memfd-add-MFD_NOEXEC_SEAL-and-MFD_EXEC/20221202-093847
base: https://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm.git mm-everything
patch link: https://lore.kernel.org/r/20221202013404.163143-3-jeffxu%40google.com
patch subject: [PATCH v3] mm/memfd: add MFD_NOEXEC_SEAL and MFD_EXEC
config: i386-randconfig-a003
compiler: gcc-11 (Debian 11.3.0-8) 11.3.0
reproduce (this is a W=1 build):
# https://github.com/intel-lab-lkp/linux/commit/d6b8fec1440cb9206bef29eb27359a61e6c73f41
git remote add linux-review https://github.com/intel-lab-lkp/linux
git fetch --no-tags linux-review jeffxu-chromium-org/mm-memfd-add-MFD_NOEXEC_SEAL-and-MFD_EXEC/20221202-093847
git checkout d6b8fec1440cb9206bef29eb27359a61e6c73f41
# save the config file
mkdir build_dir && cp config build_dir/.config
make W=1 O=build_dir ARCH=i386 SHELL=/bin/bash
If you fix the issue, kindly add following tag where applicable
| Reported-by: kernel test robot <[email protected]>
All warnings (new ones prefixed by >>):
>> kernel/pid_namespace.c:263:5: warning: no previous prototype for 'pid_mfd_noexec_dointvec_minmax' [-Wmissing-prototypes]
263 | int pid_mfd_noexec_dointvec_minmax(struct ctl_table *table, int write,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
vim +/pid_mfd_noexec_dointvec_minmax +263 kernel/pid_namespace.c
261
262 #if defined(CONFIG_SYSCTL) && defined(CONFIG_MEMFD_CREATE)
> 263 int pid_mfd_noexec_dointvec_minmax(struct ctl_table *table, int write,
264 void *buffer, size_t *lenp, loff_t *ppos)
265 {
266 struct pid_namespace *ns = task_active_pid_ns(current);
267 struct ctl_table table_copy;
268
269 if (write && !capable(CAP_SYS_ADMIN))
270 return -EPERM;
271
272 table_copy = *table;
273 if (ns != &init_pid_ns)
274 table_copy.data = &ns->memfd_noexec_scope;
275
276 /*
277 * set minimum to current value, the effect is only bigger
278 * value is accepted.
279 */
280 if (*(int *)table_copy.data > *(int *)table_copy.extra1)
281 table_copy.extra1 = table_copy.data;
282
283 return proc_dointvec_minmax(&table_copy, write, buffer, lenp, ppos);
284 }
285
--
0-DAY CI Kernel Test Service
https://01.org/lkp
Hi,
Thank you for the patch! Perhaps something to improve:
[auto build test WARNING on akpm-mm/mm-everything]
url: https://github.com/intel-lab-lkp/linux/commits/jeffxu-chromium-org/mm-memfd-add-MFD_NOEXEC_SEAL-and-MFD_EXEC/20221202-093847
base: https://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm.git mm-everything
patch link: https://lore.kernel.org/r/20221202013404.163143-3-jeffxu%40google.com
patch subject: [PATCH v3] mm/memfd: add MFD_NOEXEC_SEAL and MFD_EXEC
config: i386-randconfig-a002
compiler: clang version 14.0.6 (https://github.com/llvm/llvm-project f28c006a5895fc0e329fe15fead81e37457cb1d1)
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# https://github.com/intel-lab-lkp/linux/commit/d6b8fec1440cb9206bef29eb27359a61e6c73f41
git remote add linux-review https://github.com/intel-lab-lkp/linux
git fetch --no-tags linux-review jeffxu-chromium-org/mm-memfd-add-MFD_NOEXEC_SEAL-and-MFD_EXEC/20221202-093847
git checkout d6b8fec1440cb9206bef29eb27359a61e6c73f41
# save the config file
mkdir build_dir && cp config build_dir/.config
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross W=1 O=build_dir ARCH=i386 SHELL=/bin/bash
If you fix the issue, kindly add following tag where applicable
| Reported-by: kernel test robot <[email protected]>
All warnings (new ones prefixed by >>):
>> kernel/pid_namespace.c:263:5: warning: no previous prototype for function 'pid_mfd_noexec_dointvec_minmax' [-Wmissing-prototypes]
int pid_mfd_noexec_dointvec_minmax(struct ctl_table *table, int write,
^
kernel/pid_namespace.c:263:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
int pid_mfd_noexec_dointvec_minmax(struct ctl_table *table, int write,
^
static
1 warning generated.
vim +/pid_mfd_noexec_dointvec_minmax +263 kernel/pid_namespace.c
261
262 #if defined(CONFIG_SYSCTL) && defined(CONFIG_MEMFD_CREATE)
> 263 int pid_mfd_noexec_dointvec_minmax(struct ctl_table *table, int write,
264 void *buffer, size_t *lenp, loff_t *ppos)
265 {
266 struct pid_namespace *ns = task_active_pid_ns(current);
267 struct ctl_table table_copy;
268
269 if (write && !capable(CAP_SYS_ADMIN))
270 return -EPERM;
271
272 table_copy = *table;
273 if (ns != &init_pid_ns)
274 table_copy.data = &ns->memfd_noexec_scope;
275
276 /*
277 * set minimum to current value, the effect is only bigger
278 * value is accepted.
279 */
280 if (*(int *)table_copy.data > *(int *)table_copy.extra1)
281 table_copy.extra1 = table_copy.data;
282
283 return proc_dointvec_minmax(&table_copy, write, buffer, lenp, ppos);
284 }
285
--
0-DAY CI Kernel Test Service
https://01.org/lkp
Hi,
Thank you for the patch! Perhaps something to improve:
[auto build test WARNING on akpm-mm/mm-everything]
url: https://github.com/intel-lab-lkp/linux/commits/jeffxu-chromium-org/mm-memfd-add-MFD_NOEXEC_SEAL-and-MFD_EXEC/20221202-093847
base: https://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm.git mm-everything
patch link: https://lore.kernel.org/r/20221202013404.163143-3-jeffxu%40google.com
patch subject: [PATCH v3] mm/memfd: add MFD_NOEXEC_SEAL and MFD_EXEC
config: i386-randconfig-a013
compiler: clang version 14.0.6 (https://github.com/llvm/llvm-project f28c006a5895fc0e329fe15fead81e37457cb1d1)
reproduce (this is a W=1 build):
wget https://raw.githubusercontent.com/intel/lkp-tests/master/sbin/make.cross -O ~/bin/make.cross
chmod +x ~/bin/make.cross
# https://github.com/intel-lab-lkp/linux/commit/d6b8fec1440cb9206bef29eb27359a61e6c73f41
git remote add linux-review https://github.com/intel-lab-lkp/linux
git fetch --no-tags linux-review jeffxu-chromium-org/mm-memfd-add-MFD_NOEXEC_SEAL-and-MFD_EXEC/20221202-093847
git checkout d6b8fec1440cb9206bef29eb27359a61e6c73f41
# save the config file
mkdir build_dir && cp config build_dir/.config
COMPILER_INSTALL_PATH=$HOME/0day COMPILER=clang make.cross W=1 O=build_dir ARCH=i386 SHELL=/bin/bash
If you fix the issue, kindly add following tag where applicable
| Reported-by: kernel test robot <[email protected]>
All warnings (new ones prefixed by >>):
>> kernel/pid_namespace.c:263:5: warning: no previous prototype for function 'pid_mfd_noexec_dointvec_minmax' [-Wmissing-prototypes]
int pid_mfd_noexec_dointvec_minmax(struct ctl_table *table, int write,
^
kernel/pid_namespace.c:263:1: note: declare 'static' if the function is not intended to be used outside of this translation unit
int pid_mfd_noexec_dointvec_minmax(struct ctl_table *table, int write,
^
static
1 warning generated.
vim +/pid_mfd_noexec_dointvec_minmax +263 kernel/pid_namespace.c
261
262 #if defined(CONFIG_SYSCTL) && defined(CONFIG_MEMFD_CREATE)
> 263 int pid_mfd_noexec_dointvec_minmax(struct ctl_table *table, int write,
264 void *buffer, size_t *lenp, loff_t *ppos)
265 {
266 struct pid_namespace *ns = task_active_pid_ns(current);
267 struct ctl_table table_copy;
268
269 if (write && !capable(CAP_SYS_ADMIN))
270 return -EPERM;
271
272 table_copy = *table;
273 if (ns != &init_pid_ns)
274 table_copy.data = &ns->memfd_noexec_scope;
275
276 /*
277 * set minimum to current value, the effect is only bigger
278 * value is accepted.
279 */
280 if (*(int *)table_copy.data > *(int *)table_copy.extra1)
281 table_copy.extra1 = table_copy.data;
282
283 return proc_dointvec_minmax(&table_copy, write, buffer, lenp, ppos);
284 }
285
--
0-DAY CI Kernel Test Service
https://01.org/lkp
On Fri, Dec 02, 2022 at 01:34:00AM +0000, [email protected] wrote:
> From: Jeff Xu <[email protected]>
>
> The new MFD_NOEXEC_SEAL and MFD_EXEC flags allows application to
> set executable bit at creation time (memfd_create).
>
> When MFD_NOEXEC_SEAL is set, memfd is created without executable bit
> (mode:0666), and sealed with F_SEAL_EXEC, so it can't be chmod to
> be executable (mode: 0777) after creation.
>
> when MFD_EXEC flag is set, memfd is created with executable bit
> (mode:0777), this is the same as the old behavior of memfd_create.
>
> The new pid namespaced sysctl vm.memfd_noexec has 3 values:
> 0: memfd_create() without MFD_EXEC nor MFD_NOEXEC_SEAL acts like
> MFD_EXEC was set.
> 1: memfd_create() without MFD_EXEC nor MFD_NOEXEC_SEAL acts like
> MFD_NOEXEC_SEAL was set.
> 2:memfd_create() without MFD_NOEXEC_SEAL will be rejected.
^ nit: missing space
>
> The sysctl allows finer control of memfd_create for old-software
> that doesn't set the executable bit, for example, a container with
> vm.memfd_noexec=1 means the old-software will create non-executable
> memfd by default.
>
> Co-developed-by: Daniel Verkamp <[email protected]>
> Signed-off-by: Daniel Verkamp <[email protected]>
> Signed-off-by: Jeff Xu <[email protected]>
> ---
> include/linux/pid_namespace.h | 19 ++++++++++++++
> include/uapi/linux/memfd.h | 4 +++
> kernel/pid_namespace.c | 47 +++++++++++++++++++++++++++++++++++
> mm/memfd.c | 44 ++++++++++++++++++++++++++++++--
> 4 files changed, 112 insertions(+), 2 deletions(-)
>
> diff --git a/include/linux/pid_namespace.h b/include/linux/pid_namespace.h
> index 07481bb87d4e..a4789a7b34a9 100644
> --- a/include/linux/pid_namespace.h
> +++ b/include/linux/pid_namespace.h
> @@ -16,6 +16,21 @@
>
> struct fs_pin;
>
> +#if defined(CONFIG_SYSCTL) && defined(CONFIG_MEMFD_CREATE)
> +/*
> + * sysctl for vm.memfd_noexec
> + * 0: memfd_create() without MFD_EXEC nor MFD_NOEXEC_SEAL
> + * acts like MFD_EXEC was set.
> + * 1: memfd_create() without MFD_EXEC nor MFD_NOEXEC_SEAL
> + * acts like MFD_NOEXEC_SEAL was set.
> + * 2: memfd_create() without MFD_NOEXEC_SEAL will be
> + * rejected.
> + */
> +#define MEMFD_NOEXEC_SCOPE_EXEC 0
> +#define MEMFD_NOEXEC_SCOPE_NOEXEC_SEAL 1
> +#define MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED 2
> +#endif
> +
> struct pid_namespace {
> struct idr idr;
> struct rcu_head rcu;
> @@ -31,6 +46,10 @@ struct pid_namespace {
> struct ucounts *ucounts;
> int reboot; /* group exit code if this pidns was rebooted */
> struct ns_common ns;
> +#if defined(CONFIG_SYSCTL) && defined(CONFIG_MEMFD_CREATE)
> + /* sysctl for vm.memfd_noexec */
> + int memfd_noexec_scope;
> +#endif
> } __randomize_layout;
>
> extern struct pid_namespace init_pid_ns;
> diff --git a/include/uapi/linux/memfd.h b/include/uapi/linux/memfd.h
> index 7a8a26751c23..273a4e15dfcf 100644
> --- a/include/uapi/linux/memfd.h
> +++ b/include/uapi/linux/memfd.h
> @@ -8,6 +8,10 @@
> #define MFD_CLOEXEC 0x0001U
> #define MFD_ALLOW_SEALING 0x0002U
> #define MFD_HUGETLB 0x0004U
> +/* not executable and sealed to prevent changing to executable. */
> +#define MFD_NOEXEC_SEAL 0x0008U
> +/* executable */
> +#define MFD_EXEC 0x0010U
>
> /*
> * Huge page size encoding when MFD_HUGETLB is specified, and a huge page
> diff --git a/kernel/pid_namespace.c b/kernel/pid_namespace.c
> index f4f8cb0435b4..71dd9b0a0f62 100644
> --- a/kernel/pid_namespace.c
> +++ b/kernel/pid_namespace.c
> @@ -110,6 +110,10 @@ static struct pid_namespace *create_pid_namespace(struct user_namespace *user_ns
> ns->ucounts = ucounts;
> ns->pid_allocated = PIDNS_ADDING;
>
> +#if defined(CONFIG_SYSCTL) && defined(CONFIG_MEMFD_CREATE)
> + ns->memfd_noexec_scope = MEMFD_NOEXEC_SCOPE_EXEC;
> +#endif
I think this should be inherited from the parent pid namespace instead?
> +
> return ns;
>
> out_free_idr:
> @@ -255,6 +259,45 @@ void zap_pid_ns_processes(struct pid_namespace *pid_ns)
> return;
> }
>
> +#if defined(CONFIG_SYSCTL) && defined(CONFIG_MEMFD_CREATE)
> +int pid_mfd_noexec_dointvec_minmax(struct ctl_table *table, int write,
> + void *buffer, size_t *lenp, loff_t *ppos)
> +{
> + struct pid_namespace *ns = task_active_pid_ns(current);
> + struct ctl_table table_copy;
> +
> + if (write && !capable(CAP_SYS_ADMIN))
> + return -EPERM;
> +
> + table_copy = *table;
> + if (ns != &init_pid_ns)
> + table_copy.data = &ns->memfd_noexec_scope;
> +
> + /*
> + * set minimum to current value, the effect is only bigger
> + * value is accepted.
> + */
> + if (*(int *)table_copy.data > *(int *)table_copy.extra1)
> + table_copy.extra1 = table_copy.data;
Yeah, I like this kind of enforcement.
> +
> + return proc_dointvec_minmax(&table_copy, write, buffer, lenp, ppos);
> +}
> +
> +static struct ctl_table pid_ns_ctl_table_vm[] = {
> + {
> + .procname = "memfd_noexec",
> + .data = &init_pid_ns.memfd_noexec_scope,
> + .maxlen = sizeof(init_pid_ns.memfd_noexec_scope),
> + .mode = 0644,
> + .proc_handler = pid_mfd_noexec_dointvec_minmax,
> + .extra1 = SYSCTL_ZERO,
> + .extra2 = SYSCTL_TWO,
> + },
> + { }
> +};
> +static struct ctl_path vm_path[] = { { .procname = "vm", }, { } };
> +#endif
> +
> #ifdef CONFIG_CHECKPOINT_RESTORE
> static int pid_ns_ctl_handler(struct ctl_table *table, int write,
> void *buffer, size_t *lenp, loff_t *ppos)
> @@ -455,6 +498,10 @@ static __init int pid_namespaces_init(void)
> #ifdef CONFIG_CHECKPOINT_RESTORE
> register_sysctl_paths(kern_path, pid_ns_ctl_table);
> #endif
> +
> +#if defined(CONFIG_SYSCTL) && defined(CONFIG_MEMFD_CREATE)
> + register_sysctl_paths(vm_path, pid_ns_ctl_table_vm);
> +#endif
> return 0;
> }
>
> diff --git a/mm/memfd.c b/mm/memfd.c
> index 4ebeab94aa74..69e897dea6d5 100644
> --- a/mm/memfd.c
> +++ b/mm/memfd.c
> @@ -18,6 +18,7 @@
> #include <linux/hugetlb.h>
> #include <linux/shmem_fs.h>
> #include <linux/memfd.h>
> +#include <linux/pid_namespace.h>
> #include <uapi/linux/memfd.h>
>
> /*
> @@ -263,12 +264,13 @@ long memfd_fcntl(struct file *file, unsigned int cmd, unsigned long arg)
> #define MFD_NAME_PREFIX_LEN (sizeof(MFD_NAME_PREFIX) - 1)
> #define MFD_NAME_MAX_LEN (NAME_MAX - MFD_NAME_PREFIX_LEN)
>
> -#define MFD_ALL_FLAGS (MFD_CLOEXEC | MFD_ALLOW_SEALING | MFD_HUGETLB)
> +#define MFD_ALL_FLAGS (MFD_CLOEXEC | MFD_ALLOW_SEALING | MFD_HUGETLB | MFD_NOEXEC_SEAL | MFD_EXEC)
>
> SYSCALL_DEFINE2(memfd_create,
> const char __user *, uname,
> unsigned int, flags)
> {
> + struct pid_namespace *ns;
> unsigned int *file_seals;
> struct file *file;
> int fd, error;
> @@ -285,6 +287,36 @@ SYSCALL_DEFINE2(memfd_create,
> return -EINVAL;
> }
>
> + /* Invalid if both EXEC and NOEXEC_SEAL are set.*/
> + if ((flags & MFD_EXEC) && (flags & MFD_NOEXEC_SEAL))
> + return -EINVAL;
> +
> + if (!(flags & (MFD_EXEC | MFD_NOEXEC_SEAL))) {
> +#ifdef CONFIG_SYSCTL
> + int sysctl = MEMFD_NOEXEC_SCOPE_EXEC;
> +
> + ns = task_active_pid_ns(current);
> + if (ns)
> + sysctl = ns->memfd_noexec_scope;
> +
> + if (sysctl == MEMFD_NOEXEC_SCOPE_EXEC) {
> + flags |= MFD_EXEC;
> + } else if (sysctl == MEMFD_NOEXEC_SCOPE_NOEXEC_SEAL) {
> + flags |= MFD_NOEXEC_SEAL;
> + } else {
> + pr_warn_ratelimited(
> + "memfd_create(): MFD_NOEXEC_SEAL is enforced, pid=%d\n",
> + task_pid_nr(current));
> + return -EINVAL;
> + }
Not a huge deal, but the above could be a switch statement to improve
readability.
> +#else
> + flags |= MFD_EXEC;
> +#endif
> + pr_warn_ratelimited(
> + "memfd_create() without MFD_EXEC nor MFD_NOEXEC_SEAL, pid=%d\n",
> + task_pid_nr(current));
Perhaps include process name as well -- makes admin lives easier. :)
pr_warn_ratelimited(
"memfd_create() without MFD_EXEC nor MFD_NOEXEC_SEAL: %s[%d]\n",
current->comm, task_pid_nr(current));
> + }
> +
> /* length includes terminating zero */
> len = strnlen_user(uname, MFD_NAME_MAX_LEN + 1);
> if (len <= 0)
> @@ -328,7 +360,15 @@ SYSCALL_DEFINE2(memfd_create,
> file->f_mode |= FMODE_LSEEK | FMODE_PREAD | FMODE_PWRITE;
> file->f_flags |= O_LARGEFILE;
>
> - if (flags & MFD_ALLOW_SEALING) {
> + if (flags & MFD_NOEXEC_SEAL) {
> + struct inode *inode = file_inode(file);
> +
> + inode->i_mode &= ~0111;
> + file_seals = memfd_file_seals_ptr(file);
> + *file_seals &= ~F_SEAL_SEAL;
> + *file_seals |= F_SEAL_EXEC;
> + } else if (flags & MFD_ALLOW_SEALING) {
> + /* MFD_EXEC and MFD_ALLOW_SEALING are set */
> file_seals = memfd_file_seals_ptr(file);
> *file_seals &= ~F_SEAL_SEAL;
> }
> --
> 2.39.0.rc0.267.gcb52ba06e7-goog
>
Otherwise, looks good to me.
Reviewed-by: Kees Cook <[email protected]>
--
Kees Cook
On Fri, Dec 2, 2022 at 2:56 PM Kees Cook <[email protected]> wrote:
>
> On Fri, Dec 02, 2022 at 01:34:00AM +0000, [email protected] wrote:
> > From: Jeff Xu <[email protected]>
> >
> > The new MFD_NOEXEC_SEAL and MFD_EXEC flags allows application to
> > set executable bit at creation time (memfd_create).
> >
> > When MFD_NOEXEC_SEAL is set, memfd is created without executable bit
> > (mode:0666), and sealed with F_SEAL_EXEC, so it can't be chmod to
> > be executable (mode: 0777) after creation.
> >
> > when MFD_EXEC flag is set, memfd is created with executable bit
> > (mode:0777), this is the same as the old behavior of memfd_create.
> >
> > The new pid namespaced sysctl vm.memfd_noexec has 3 values:
> > 0: memfd_create() without MFD_EXEC nor MFD_NOEXEC_SEAL acts like
> > MFD_EXEC was set.
> > 1: memfd_create() without MFD_EXEC nor MFD_NOEXEC_SEAL acts like
> > MFD_NOEXEC_SEAL was set.
> > 2:memfd_create() without MFD_NOEXEC_SEAL will be rejected.
>
> ^ nit: missing space
>
> >
> > The sysctl allows finer control of memfd_create for old-software
> > that doesn't set the executable bit, for example, a container with
> > vm.memfd_noexec=1 means the old-software will create non-executable
> > memfd by default.
> >
> > Co-developed-by: Daniel Verkamp <[email protected]>
> > Signed-off-by: Daniel Verkamp <[email protected]>
> > Signed-off-by: Jeff Xu <[email protected]>
> > ---
> > include/linux/pid_namespace.h | 19 ++++++++++++++
> > include/uapi/linux/memfd.h | 4 +++
> > kernel/pid_namespace.c | 47 +++++++++++++++++++++++++++++++++++
> > mm/memfd.c | 44 ++++++++++++++++++++++++++++++--
> > 4 files changed, 112 insertions(+), 2 deletions(-)
> >
> > diff --git a/include/linux/pid_namespace.h b/include/linux/pid_namespace.h
> > index 07481bb87d4e..a4789a7b34a9 100644
> > --- a/include/linux/pid_namespace.h
> > +++ b/include/linux/pid_namespace.h
> > @@ -16,6 +16,21 @@
> >
> > struct fs_pin;
> >
> > +#if defined(CONFIG_SYSCTL) && defined(CONFIG_MEMFD_CREATE)
> > +/*
> > + * sysctl for vm.memfd_noexec
> > + * 0: memfd_create() without MFD_EXEC nor MFD_NOEXEC_SEAL
> > + * acts like MFD_EXEC was set.
> > + * 1: memfd_create() without MFD_EXEC nor MFD_NOEXEC_SEAL
> > + * acts like MFD_NOEXEC_SEAL was set.
> > + * 2: memfd_create() without MFD_NOEXEC_SEAL will be
> > + * rejected.
> > + */
> > +#define MEMFD_NOEXEC_SCOPE_EXEC 0
> > +#define MEMFD_NOEXEC_SCOPE_NOEXEC_SEAL 1
> > +#define MEMFD_NOEXEC_SCOPE_NOEXEC_ENFORCED 2
> > +#endif
> > +
> > struct pid_namespace {
> > struct idr idr;
> > struct rcu_head rcu;
> > @@ -31,6 +46,10 @@ struct pid_namespace {
> > struct ucounts *ucounts;
> > int reboot; /* group exit code if this pidns was rebooted */
> > struct ns_common ns;
> > +#if defined(CONFIG_SYSCTL) && defined(CONFIG_MEMFD_CREATE)
> > + /* sysctl for vm.memfd_noexec */
> > + int memfd_noexec_scope;
> > +#endif
> > } __randomize_layout;
> >
> > extern struct pid_namespace init_pid_ns;
> > diff --git a/include/uapi/linux/memfd.h b/include/uapi/linux/memfd.h
> > index 7a8a26751c23..273a4e15dfcf 100644
> > --- a/include/uapi/linux/memfd.h
> > +++ b/include/uapi/linux/memfd.h
> > @@ -8,6 +8,10 @@
> > #define MFD_CLOEXEC 0x0001U
> > #define MFD_ALLOW_SEALING 0x0002U
> > #define MFD_HUGETLB 0x0004U
> > +/* not executable and sealed to prevent changing to executable. */
> > +#define MFD_NOEXEC_SEAL 0x0008U
> > +/* executable */
> > +#define MFD_EXEC 0x0010U
> >
> > /*
> > * Huge page size encoding when MFD_HUGETLB is specified, and a huge page
> > diff --git a/kernel/pid_namespace.c b/kernel/pid_namespace.c
> > index f4f8cb0435b4..71dd9b0a0f62 100644
> > --- a/kernel/pid_namespace.c
> > +++ b/kernel/pid_namespace.c
> > @@ -110,6 +110,10 @@ static struct pid_namespace *create_pid_namespace(struct user_namespace *user_ns
> > ns->ucounts = ucounts;
> > ns->pid_allocated = PIDNS_ADDING;
> >
> > +#if defined(CONFIG_SYSCTL) && defined(CONFIG_MEMFD_CREATE)
> > + ns->memfd_noexec_scope = MEMFD_NOEXEC_SCOPE_EXEC;
> > +#endif
>
> I think this should be inherited from the parent pid namespace instead?
>
OK, I will add logic to make the child name space to inherit from the
parent namespace at creation time,
but if the parent changes this setting later, the child will not pick
up the parent's change automatically, would that be OK ?
Or do we want the child to keep in sync with the parent, to the
highest value. For example,
if init namespace val=1, child namespace=1, later when init namespace
= 2, child namespace will automatically become 2.
Jeff
> > +
> > return ns;
> >
> > out_free_idr:
> > @@ -255,6 +259,45 @@ void zap_pid_ns_processes(struct pid_namespace *pid_ns)
> > return;
> > }
> >
> > +#if defined(CONFIG_SYSCTL) && defined(CONFIG_MEMFD_CREATE)
> > +int pid_mfd_noexec_dointvec_minmax(struct ctl_table *table, int write,
> > + void *buffer, size_t *lenp, loff_t *ppos)
> > +{
> > + struct pid_namespace *ns = task_active_pid_ns(current);
> > + struct ctl_table table_copy;
> > +
> > + if (write && !capable(CAP_SYS_ADMIN))
> > + return -EPERM;
> > +
> > + table_copy = *table;
> > + if (ns != &init_pid_ns)
> > + table_copy.data = &ns->memfd_noexec_scope;
> > +
> > + /*
> > + * set minimum to current value, the effect is only bigger
> > + * value is accepted.
> > + */
> > + if (*(int *)table_copy.data > *(int *)table_copy.extra1)
> > + table_copy.extra1 = table_copy.data;
>
> Yeah, I like this kind of enforcement.
>
> > +
> > + return proc_dointvec_minmax(&table_copy, write, buffer, lenp, ppos);
> > +}
> > +
> > +static struct ctl_table pid_ns_ctl_table_vm[] = {
> > + {
> > + .procname = "memfd_noexec",
> > + .data = &init_pid_ns.memfd_noexec_scope,
> > + .maxlen = sizeof(init_pid_ns.memfd_noexec_scope),
> > + .mode = 0644,
> > + .proc_handler = pid_mfd_noexec_dointvec_minmax,
> > + .extra1 = SYSCTL_ZERO,
> > + .extra2 = SYSCTL_TWO,
> > + },
> > + { }
> > +};
> > +static struct ctl_path vm_path[] = { { .procname = "vm", }, { } };
> > +#endif
> > +
> > #ifdef CONFIG_CHECKPOINT_RESTORE
> > static int pid_ns_ctl_handler(struct ctl_table *table, int write,
> > void *buffer, size_t *lenp, loff_t *ppos)
> > @@ -455,6 +498,10 @@ static __init int pid_namespaces_init(void)
> > #ifdef CONFIG_CHECKPOINT_RESTORE
> > register_sysctl_paths(kern_path, pid_ns_ctl_table);
> > #endif
> > +
> > +#if defined(CONFIG_SYSCTL) && defined(CONFIG_MEMFD_CREATE)
> > + register_sysctl_paths(vm_path, pid_ns_ctl_table_vm);
> > +#endif
> > return 0;
> > }
> >
> > diff --git a/mm/memfd.c b/mm/memfd.c
> > index 4ebeab94aa74..69e897dea6d5 100644
> > --- a/mm/memfd.c
> > +++ b/mm/memfd.c
> > @@ -18,6 +18,7 @@
> > #include <linux/hugetlb.h>
> > #include <linux/shmem_fs.h>
> > #include <linux/memfd.h>
> > +#include <linux/pid_namespace.h>
> > #include <uapi/linux/memfd.h>
> >
> > /*
> > @@ -263,12 +264,13 @@ long memfd_fcntl(struct file *file, unsigned int cmd, unsigned long arg)
> > #define MFD_NAME_PREFIX_LEN (sizeof(MFD_NAME_PREFIX) - 1)
> > #define MFD_NAME_MAX_LEN (NAME_MAX - MFD_NAME_PREFIX_LEN)
> >
> > -#define MFD_ALL_FLAGS (MFD_CLOEXEC | MFD_ALLOW_SEALING | MFD_HUGETLB)
> > +#define MFD_ALL_FLAGS (MFD_CLOEXEC | MFD_ALLOW_SEALING | MFD_HUGETLB | MFD_NOEXEC_SEAL | MFD_EXEC)
> >
> > SYSCALL_DEFINE2(memfd_create,
> > const char __user *, uname,
> > unsigned int, flags)
> > {
> > + struct pid_namespace *ns;
> > unsigned int *file_seals;
> > struct file *file;
> > int fd, error;
> > @@ -285,6 +287,36 @@ SYSCALL_DEFINE2(memfd_create,
> > return -EINVAL;
> > }
> >
> > + /* Invalid if both EXEC and NOEXEC_SEAL are set.*/
> > + if ((flags & MFD_EXEC) && (flags & MFD_NOEXEC_SEAL))
> > + return -EINVAL;
> > +
> > + if (!(flags & (MFD_EXEC | MFD_NOEXEC_SEAL))) {
> > +#ifdef CONFIG_SYSCTL
> > + int sysctl = MEMFD_NOEXEC_SCOPE_EXEC;
> > +
> > + ns = task_active_pid_ns(current);
> > + if (ns)
> > + sysctl = ns->memfd_noexec_scope;
> > +
> > + if (sysctl == MEMFD_NOEXEC_SCOPE_EXEC) {
> > + flags |= MFD_EXEC;
> > + } else if (sysctl == MEMFD_NOEXEC_SCOPE_NOEXEC_SEAL) {
> > + flags |= MFD_NOEXEC_SEAL;
> > + } else {
> > + pr_warn_ratelimited(
> > + "memfd_create(): MFD_NOEXEC_SEAL is enforced, pid=%d\n",
> > + task_pid_nr(current));
> > + return -EINVAL;
> > + }
>
> Not a huge deal, but the above could be a switch statement to improve
> readability.
>
> > +#else
> > + flags |= MFD_EXEC;
> > +#endif
> > + pr_warn_ratelimited(
> > + "memfd_create() without MFD_EXEC nor MFD_NOEXEC_SEAL, pid=%d\n",
> > + task_pid_nr(current));
>
> Perhaps include process name as well -- makes admin lives easier. :)
>
> pr_warn_ratelimited(
> "memfd_create() without MFD_EXEC nor MFD_NOEXEC_SEAL: %s[%d]\n",
> current->comm, task_pid_nr(current));
>
> > + }
> > +
> > /* length includes terminating zero */
> > len = strnlen_user(uname, MFD_NAME_MAX_LEN + 1);
> > if (len <= 0)
> > @@ -328,7 +360,15 @@ SYSCALL_DEFINE2(memfd_create,
> > file->f_mode |= FMODE_LSEEK | FMODE_PREAD | FMODE_PWRITE;
> > file->f_flags |= O_LARGEFILE;
> >
> > - if (flags & MFD_ALLOW_SEALING) {
> > + if (flags & MFD_NOEXEC_SEAL) {
> > + struct inode *inode = file_inode(file);
> > +
> > + inode->i_mode &= ~0111;
> > + file_seals = memfd_file_seals_ptr(file);
> > + *file_seals &= ~F_SEAL_SEAL;
> > + *file_seals |= F_SEAL_EXEC;
> > + } else if (flags & MFD_ALLOW_SEALING) {
> > + /* MFD_EXEC and MFD_ALLOW_SEALING are set */
> > file_seals = memfd_file_seals_ptr(file);
> > *file_seals &= ~F_SEAL_SEAL;
> > }
> > --
> > 2.39.0.rc0.267.gcb52ba06e7-goog
> >
>
> Otherwise, looks good to me.
>
> Reviewed-by: Kees Cook <[email protected]>
>
> --
> Kees Cook