2022-12-02 22:58:39

by Maximilian Luz

Subject: [PATCH 6/9] platform/surface: dtx: Use target-ID enum instead of hard-coding values

Instead of hard-coding the target ID, use the respective enum
ssam_ssh_tid value.

Signed-off-by: Maximilian Luz <[email protected]>
---
drivers/platform/surface/surface_dtx.c | 18 +++++++++---------
1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/drivers/platform/surface/surface_dtx.c b/drivers/platform/surface/surface_dtx.c
index ed36944467f9..0de76a784a35 100644
--- a/drivers/platform/surface/surface_dtx.c
+++ b/drivers/platform/surface/surface_dtx.c
@@ -71,63 +71,63 @@ static_assert(sizeof(struct ssam_bas_base_info) == 2);

SSAM_DEFINE_SYNC_REQUEST_N(ssam_bas_latch_lock, {
.target_category = SSAM_SSH_TC_BAS,
- .target_id = 0x01,
+ .target_id = SSAM_SSH_TID_SAM,
.command_id = 0x06,
.instance_id = 0x00,
});

SSAM_DEFINE_SYNC_REQUEST_N(ssam_bas_latch_unlock, {
.target_category = SSAM_SSH_TC_BAS,
- .target_id = 0x01,
+ .target_id = SSAM_SSH_TID_SAM,
.command_id = 0x07,
.instance_id = 0x00,
});

SSAM_DEFINE_SYNC_REQUEST_N(ssam_bas_latch_request, {
.target_category = SSAM_SSH_TC_BAS,
- .target_id = 0x01,
+ .target_id = SSAM_SSH_TID_SAM,
.command_id = 0x08,
.instance_id = 0x00,
});

SSAM_DEFINE_SYNC_REQUEST_N(ssam_bas_latch_confirm, {
.target_category = SSAM_SSH_TC_BAS,
- .target_id = 0x01,
+ .target_id = SSAM_SSH_TID_SAM,
.command_id = 0x09,
.instance_id = 0x00,
});

SSAM_DEFINE_SYNC_REQUEST_N(ssam_bas_latch_heartbeat, {
.target_category = SSAM_SSH_TC_BAS,
- .target_id = 0x01,
+ .target_id = SSAM_SSH_TID_SAM,
.command_id = 0x0a,
.instance_id = 0x00,
});

SSAM_DEFINE_SYNC_REQUEST_N(ssam_bas_latch_cancel, {
.target_category = SSAM_SSH_TC_BAS,
- .target_id = 0x01,
+ .target_id = SSAM_SSH_TID_SAM,
.command_id = 0x0b,
.instance_id = 0x00,
});

SSAM_DEFINE_SYNC_REQUEST_R(ssam_bas_get_base, struct ssam_bas_base_info, {
.target_category = SSAM_SSH_TC_BAS,
- .target_id = 0x01,
+ .target_id = SSAM_SSH_TID_SAM,
.command_id = 0x0c,
.instance_id = 0x00,
});

SSAM_DEFINE_SYNC_REQUEST_R(ssam_bas_get_device_mode, u8, {
.target_category = SSAM_SSH_TC_BAS,
- .target_id = 0x01,
+ .target_id = SSAM_SSH_TID_SAM,
.command_id = 0x0d,
.instance_id = 0x00,
});

SSAM_DEFINE_SYNC_REQUEST_R(ssam_bas_get_latch_status, u8, {
.target_category = SSAM_SSH_TC_BAS,
- .target_id = 0x01,
+ .target_id = SSAM_SSH_TID_SAM,
.command_id = 0x11,
.instance_id = 0x00,
});
--
2.38.1