Add ASIX based USB 10Base-T1L adapter support:
https://linux-automation.com/en/products/usb-t1l.html
Signed-off-by: Oleksij Rempel <[email protected]>
---
drivers/net/usb/asix_devices.c | 18 ++++++++++++++++++
1 file changed, 18 insertions(+)
diff --git a/drivers/net/usb/asix_devices.c b/drivers/net/usb/asix_devices.c
index 0fe3773c5bca..1a2302dd5ff8 100644
--- a/drivers/net/usb/asix_devices.c
+++ b/drivers/net/usb/asix_devices.c
@@ -1350,6 +1350,20 @@ static const struct driver_info ax88772b_info = {
.data = FLAG_EEPROM_MAC,
};
+static const struct driver_info lxausb_t1l_info = {
+ .description = "Linux Automation GmbH USB 10Base-T1L",
+ .bind = ax88772_bind,
+ .unbind = ax88772_unbind,
+ .status = asix_status,
+ .reset = ax88772_reset,
+ .stop = ax88772_stop,
+ .flags = FLAG_ETHER | FLAG_FRAMING_AX | FLAG_LINK_INTR |
+ FLAG_MULTI_PACKET,
+ .rx_fixup = asix_rx_fixup_common,
+ .tx_fixup = asix_tx_fixup,
+ .data = FLAG_EEPROM_MAC,
+};
+
static const struct driver_info ax88178_info = {
.description = "ASIX AX88178 USB 2.0 Ethernet",
.bind = ax88178_bind,
@@ -1538,6 +1552,10 @@ static const struct usb_device_id products [] = {
*/
USB_DEVICE(0x066b, 0x20f9),
.driver_info = (unsigned long) &hg20f9_info,
+}, {
+ // Linux Automation GmbH USB 10Base-T1L
+ USB_DEVICE(0x33f7, 0x0004),
+ .driver_info = (unsigned long) &lxausb_t1l_info,
},
{ }, // END
};
--
2.30.2
On Mon, Dec 05, 2022 at 02:21:02PM +0100, Oleksij Rempel wrote:
> Add ASIX based USB 10Base-T1L adapter support:
> https://linux-automation.com/en/products/usb-t1l.html
Interesting.
I don't know the ASIX driver. Is Linux driving the PHY? So you get the
correct link mode for a T1L PHY?
Andrew
On Mon, Dec 05, 2022 at 02:46:15PM +0100, Andrew Lunn wrote:
> On Mon, Dec 05, 2022 at 02:21:02PM +0100, Oleksij Rempel wrote:
> > Add ASIX based USB 10Base-T1L adapter support:
> > https://linux-automation.com/en/products/usb-t1l.html
>
> Interesting.
>
> I don't know the ASIX driver. Is Linux driving the PHY? So you get the
> correct link mode for a T1L PHY?
Yes. This part of the driver is using PHYlink. It is possible to see and
do what ever thy PHY is capable of :)
Regards,
Oleksij
--
Pengutronix e.K. | |
Steuerwalder Str. 21 | http://www.pengutronix.de/ |
31137 Hildesheim, Germany | Phone: +49-5121-206917-0 |
Amtsgericht Hildesheim, HRA 2686 | Fax: +49-5121-206917-5555 |
Hello:
This patch was applied to netdev/net-next.git (master)
by Jakub Kicinski <[email protected]>:
On Mon, 5 Dec 2022 14:21:02 +0100 you wrote:
> Add ASIX based USB 10Base-T1L adapter support:
> https://linux-automation.com/en/products/usb-t1l.html
>
> Signed-off-by: Oleksij Rempel <[email protected]>
> ---
> drivers/net/usb/asix_devices.c | 18 ++++++++++++++++++
> 1 file changed, 18 insertions(+)
Here is the summary with links:
- [net-next,v1,1/1] net: asix: add support for the Linux Automation GmbH USB 10Base-T1L
https://git.kernel.org/netdev/net-next/c/5608e0a817ce
You are awesome, thank you!
--
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html