Add devicetree binding schema for the ADAMV block implemented on Socionext
Uniphier SoCs.
The ADAMV block is analog signal amplifier that is a part of the external
video and audio I/O system. This block is implemented on LD11 and LD20,
and this is defined for controlling audio I/O reset only.
Signed-off-by: Kunihiko Hayashi <[email protected]>
---
.../socionext/socionext,uniphier-adamv.yaml | 51 +++++++++++++++++++
1 file changed, 51 insertions(+)
create mode 100644 Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-adamv.yaml
diff --git a/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-adamv.yaml b/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-adamv.yaml
new file mode 100644
index 000000000000..3d61d2919049
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-adamv.yaml
@@ -0,0 +1,51 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/socionext/socionext,uniphier-adamv.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Socionext UniPhier ADAMV block
+
+maintainers:
+ - Kunihiko Hayashi <[email protected]>
+
+description: |+
+ ADAMV block implemented on Socionext UniPhier SoCs is an analog signal
+ amplifier that is a part of the external video and audio I/O system.
+
+ This block is defined for controlling audio I/O reset only.
+
+properties:
+ compatible:
+ items:
+ - enum:
+ - socionext,uniphier-ld11-adamv
+ - socionext,uniphier-ld20-adamv
+ - const: simple-mfd
+ - const: syscon
+
+ reg:
+ maxItems: 1
+
+patternProperties:
+ "^reset-controller(@[0-9a-f]+)?$":
+ $ref: /schemas/reset/socionext,uniphier-reset.yaml#
+
+required:
+ - compatible
+ - reg
+
+additionalProperties: false
+
+examples:
+ - |
+ syscon@57920000 {
+ compatible = "socionext,uniphier-ld20-adamv",
+ "simple-mfd", "syscon";
+ reg = <0x57920000 0x1000>;
+
+ reset-controller {
+ compatible = "socionext,uniphier-ld20-adamv-reset";
+ #reset-cells = <1>;
+ };
+ };
--
2.25.1
On Wed, 07 Dec 2022 14:54:03 +0900, Kunihiko Hayashi wrote:
> Add devicetree binding schema for the ADAMV block implemented on Socionext
> Uniphier SoCs.
>
> The ADAMV block is analog signal amplifier that is a part of the external
> video and audio I/O system. This block is implemented on LD11 and LD20,
> and this is defined for controlling audio I/O reset only.
>
> Signed-off-by: Kunihiko Hayashi <[email protected]>
> ---
> .../socionext/socionext,uniphier-adamv.yaml | 51 +++++++++++++++++++
> 1 file changed, 51 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-adamv.yaml
>
My bot found errors running 'make DT_CHECKER_FLAGS=-m dt_binding_check'
on your patch (DT_CHECKER_FLAGS is new in v5.13):
yamllint warnings/errors:
dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/reset/socionext,uniphier-reset.example.dtb: adamv@57920000: 'reset' does not match any of the regexes: '^reset-controller(@[0-9a-f]+)?$', 'pinctrl-[0-9]+'
From schema: /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/soc/socionext/socionext,uniphier-adamv.yaml
doc reference errors (make refcheckdocs):
See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/[email protected]
The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.