From: tal albo <[email protected]>
Fix programming incorrect value of address range
Signed-off-by: tal albo <[email protected]>
Reviewed-by: Oded Gabbay <[email protected]>
Signed-off-by: Oded Gabbay <[email protected]>
---
drivers/misc/habanalabs/gaudi2/gaudi2_coresight.c | 8 ++++----
1 file changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/misc/habanalabs/gaudi2/gaudi2_coresight.c b/drivers/misc/habanalabs/gaudi2/gaudi2_coresight.c
index 56c6ab692482..1df7a59e4101 100644
--- a/drivers/misc/habanalabs/gaudi2/gaudi2_coresight.c
+++ b/drivers/misc/habanalabs/gaudi2/gaudi2_coresight.c
@@ -2376,10 +2376,10 @@ static int gaudi2_config_bmon(struct hl_device *hdev, struct hl_debug_params *pa
WREG32(base_reg + mmBMON_ADDRH_S2_OFFSET, upper_32_bits(input->start_addr2));
WREG32(base_reg + mmBMON_ADDRL_E2_OFFSET, lower_32_bits(input->end_addr2));
WREG32(base_reg + mmBMON_ADDRH_E2_OFFSET, upper_32_bits(input->end_addr2));
- WREG32(base_reg + mmBMON_ADDRL_S3_OFFSET, lower_32_bits(input->start_addr2));
- WREG32(base_reg + mmBMON_ADDRH_S3_OFFSET, upper_32_bits(input->start_addr2));
- WREG32(base_reg + mmBMON_ADDRL_E3_OFFSET, lower_32_bits(input->end_addr2));
- WREG32(base_reg + mmBMON_ADDRH_E3_OFFSET, upper_32_bits(input->end_addr2));
+ WREG32(base_reg + mmBMON_ADDRL_S3_OFFSET, lower_32_bits(input->start_addr3));
+ WREG32(base_reg + mmBMON_ADDRH_S3_OFFSET, upper_32_bits(input->start_addr3));
+ WREG32(base_reg + mmBMON_ADDRL_E3_OFFSET, lower_32_bits(input->end_addr3));
+ WREG32(base_reg + mmBMON_ADDRH_E3_OFFSET, upper_32_bits(input->end_addr3));
WREG32(base_reg + mmBMON_IDL_OFFSET, 0x0);
WREG32(base_reg + mmBMON_IDH_OFFSET, 0x0);
--
2.25.1