Document the compatible for UFS found on the SM6125.
Signed-off-by: Lux Aliaga <[email protected]>
---
Documentation/devicetree/bindings/ufs/qcom,ufs.yaml | 2 ++
1 file changed, 2 insertions(+)
diff --git a/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml b/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml
index b517d76215e3..42422f3471b3 100644
--- a/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml
+++ b/Documentation/devicetree/bindings/ufs/qcom,ufs.yaml
@@ -29,6 +29,7 @@ properties:
- qcom,sc8280xp-ufshc
- qcom,sdm845-ufshc
- qcom,sm6115-ufshc
+ - qcom,sm6125-ufshc
- qcom,sm6350-ufshc
- qcom,sm8150-ufshc
- qcom,sm8250-ufshc
@@ -185,6 +186,7 @@ allOf:
contains:
enum:
- qcom,sm6115-ufshc
+ - qcom,sm6125-ufshc
then:
properties:
clocks:
--
2.38.1
Adds support for the Xiaomi Mi A3 (xiaomi-laurel-sprout). Here's a
summary on what's working.
- dmesg output to bootloader preconfigured display
- USB
- UFS
- SMD RPM regulators
Signed-off-by: Lux Aliaga <[email protected]>
---
arch/arm64/boot/dts/qcom/Makefile | 1 +
.../dts/qcom/sm6125-xiaomi-laurel-sprout.dts | 254 ++++++++++++++++++
2 files changed, 255 insertions(+)
create mode 100644 arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel-sprout.dts
diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index 3e79496292e7..2b2a0170db14 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -157,6 +157,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sdm850-lenovo-yoga-c630.dtb
dtb-$(CONFIG_ARCH_QCOM) += sdm850-samsung-w737.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm4250-oneplus-billie2.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm6125-sony-xperia-seine-pdx201.dtb
+dtb-$(CONFIG_ARCH_QCOM) += sm6125-xiaomi-laurel-sprout.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm6350-sony-xperia-lena-pdx213.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm6375-sony-xperia-murray-pdx225.dtb
dtb-$(CONFIG_ARCH_QCOM) += sm7225-fairphone-fp4.dtb
diff --git a/arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel-sprout.dts b/arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel-sprout.dts
new file mode 100644
index 000000000000..acdfaa83b152
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel-sprout.dts
@@ -0,0 +1,254 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) 2022, Lux Aliaga <[email protected]>
+ */
+
+/dts-v1/;
+
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/input/input.h>
+#include <dt-bindings/input/gpio-keys.h>
+#include "sm6125.dtsi"
+
+/ {
+ /* required for bootloader to select correct board */
+ qcom,msm-id = <394 0>; /* sm6125 v0 */
+ qcom,board-id = <11 0>;
+
+ model = "Xiaomi Mi A3";
+ compatible = "xiaomi,laurel-sprout", "qcom,sm6125";
+ chassis-type = "handset";
+
+ chosen {
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+
+ framebuffer0: framebuffer@5c000000 {
+ compatible = "simple-framebuffer";
+ reg = <0 0x5c000000 0 (1560 * 720 * 4)>;
+ width = <720>;
+ height = <1560>;
+ stride = <(720 * 4)>;
+ format = "a8r8g8b8";
+ };
+ };
+
+ extcon_usb: usb-id {
+ compatible = "linux,extcon-usb-gpio";
+ id-gpio = <&tlmm 102 GPIO_ACTIVE_HIGH>;
+ };
+
+ reserved-memory {
+ #address-cells = <2>;
+ #size-cells = <2>;
+
+ debug_mem: memory@ffb00000 {
+ reg = <0x0 0xffb00000 0x0 0xc0000>;
+ no-map;
+ };
+
+ last_log_mem: memory@ffbc0000 {
+ reg = <0x0 0xffbc0000 0x0 0x80000>;
+ no-map;
+ };
+
+ pstore_mem: ramoops@ffc00000 {
+ compatible = "ramoops";
+ reg = <0x0 0xffc40000 0x0 0xc0000>;
+ record-size = <0x1000>;
+ console-size = <0x40000>;
+ msg-size = <0x20000 0x20000>;
+ };
+
+ cmdline_mem: memory@ffd00000 {
+ reg = <0x0 0xffd40000 0x0 0x1000>;
+ no-map;
+ };
+ };
+};
+
+
+&hsusb_phy1 {
+ status = "okay";
+};
+
+&rpm_requests {
+ regulators-0 {
+ compatible = "qcom,rpm-pm6125-regulators";
+
+ vreg_s6a: s6 {
+ regulator-min-microvolt = <936000>;
+ regulator-max-microvolt = <1422000>;
+ };
+
+ vreg_l1a: l1 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1256000>;
+ };
+
+ vreg_l2a: l2 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1056000>;
+ };
+
+ vreg_l3a: l3 {
+ regulator-min-microvolt = <1000000>;
+ regulator-max-microvolt = <1064000>;
+ };
+
+ vreg_l4a: l4 {
+ regulator-min-microvolt = <872000>;
+ regulator-max-microvolt = <976000>;
+ };
+
+ vreg_l5a: l5 {
+ regulator-min-microvolt = <1648000>;
+ regulator-max-microvolt = <3104000>;
+ };
+
+ vreg_l6a: l6 {
+ regulator-min-microvolt = <576000>;
+ regulator-max-microvolt = <656000>;
+ };
+
+ vreg_l7a: l7 {
+ regulator-min-microvolt = <872000>;
+ regulator-max-microvolt = <976000>;
+ };
+
+ vreg_l8a: l8 {
+ regulator-min-microvolt = <400000>;
+ regulator-max-microvolt = <728000>;
+ };
+
+ vreg_l9a: l9 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1896000>;
+ };
+
+ vreg_l10a: l10 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1896000>;
+ };
+
+ vreg_l11a: l11 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1952000>;
+ };
+
+ vreg_l12a: l12 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1996000>;
+ };
+
+ vreg_l13a: l13 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1832000>;
+ };
+
+ vreg_l14a: l14 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1904000>;
+ };
+
+ vreg_l15a: l15 {
+ regulator-min-microvolt = <3104000>;
+ regulator-max-microvolt = <3232000>;
+ };
+
+ vreg_l16a: l16 {
+ regulator-min-microvolt = <1800000>;
+ regulator-max-microvolt = <1904000>;
+ };
+
+ vreg_l17a: l17 {
+ regulator-min-microvolt = <1248000>;
+ regulator-max-microvolt = <1304000>;
+ };
+
+ vreg_l18a: l18 {
+ regulator-min-microvolt = <1200000>;
+ regulator-max-microvolt = <1264000>;
+ };
+
+ vreg_l19a: l19 {
+ regulator-min-microvolt = <1648000>;
+ regulator-max-microvolt = <2952000>;
+ };
+
+ vreg_l20a: l20 {
+ regulator-min-microvolt = <1648000>;
+ regulator-max-microvolt = <2952000>;
+ };
+
+ vreg_l21a: l21 {
+ regulator-min-microvolt = <2600000>;
+ regulator-max-microvolt = <2856000>;
+ };
+
+ vreg_l22a: l22 {
+ regulator-min-microvolt = <2944000>;
+ regulator-max-microvolt = <3304000>;
+ };
+
+ vreg_l23a: l23 {
+ regulator-min-microvolt = <3000000>;
+ regulator-max-microvolt = <3400000>;
+ };
+
+ vreg_l24a: l24 {
+ regulator-min-microvolt = <2944000>;
+ regulator-max-microvolt = <3304000>;
+ };
+ };
+};
+
+&sdc2_off_state {
+ sd-cd-pins {
+ pins = "gpio98";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-disable;
+ };
+};
+
+&sdc2_on_state {
+ sd-cd-pins {
+ pins = "gpio98";
+ function = "gpio";
+ drive-strength = <2>;
+ bias-pull-up;
+ };
+};
+
+&tlmm {
+ gpio-reserved-ranges = <22 2>, <28 6>;
+};
+
+&ufs_mem_hc {
+ vcc-supply = <&vreg_l24a>;
+ vccq2-supply = <&vreg_l11a>;
+ vcc-max-microamp = <600000>;
+ vccq2-max-microamp = <600000>;
+
+ status = "okay";
+};
+
+&ufs_mem_phy {
+ vdda-phy-supply = <&vreg_l4a>;
+ vdda-pll-supply = <&vreg_l10a>;
+ vdda-phy-max-microamp = <51400>;
+ vdda-pll-max-microamp = <14200>;
+ vddp-ref-clk-supply = <&vreg_l18a>;
+
+ status = "okay";
+};
+
+&usb3 {
+ status = "okay";
+};
+
+&usb3_dwc3 {
+ extcon = <&extcon_usb>;
+};
--
2.38.1
On 15/12/2022 15:34, Konrad Dybcio wrote:
> On 15.12.2022 19:24, Lux Aliaga wrote:
>> Adds support for the Xiaomi Mi A3 (xiaomi-laurel-sprout). Here's a
>> summary on what's working.
>>
>> - dmesg output to bootloader preconfigured display
>> - USB
>> - UFS
>> - SMD RPM regulators
>>
>> Signed-off-by: Lux Aliaga <[email protected]>
>> ---
> You don't seem to have addressed the review comments from
> v2 on this patch.
>
> Konrad
Pardon me, but most of the review comments were addressed. I only missed
moving the qcom,msm-id and qcom,board-id properties below chassis-type,
but the rest should be addressed as intended.
--
Lux Aliaga
https://nixgoat.me/
Adds a UFS host controller node and its corresponding PHY to
the sm6125 platform.
Signed-off-by: Lux Aliaga <[email protected]>
---
arch/arm64/boot/dts/qcom/sm6125.dtsi | 67 ++++++++++++++++++++++++++++
1 file changed, 67 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm6125.dtsi b/arch/arm64/boot/dts/qcom/sm6125.dtsi
index 7e25a4f85594..22c945d5fc7a 100644
--- a/arch/arm64/boot/dts/qcom/sm6125.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm6125.dtsi
@@ -508,6 +508,73 @@ sdhc_2: mmc@4784000 {
status = "disabled";
};
+ ufs_mem_hc: ufs@4804000 {
+ compatible = "qcom,sm6125-ufshc", "qcom,ufshc", "jedec,ufs-2.0";
+ reg = <0x04804000 0x3000>, <0x04810000 0x8000>;
+ reg-names = "std", "ice";
+ interrupts = <GIC_SPI 356 IRQ_TYPE_LEVEL_HIGH>;
+ phys = <&ufs_mem_phy_lanes>;
+ phy-names = "ufsphy";
+ lanes-per-direction = <1>;
+ #reset-cells = <1>;
+ resets = <&gcc GCC_UFS_PHY_BCR>;
+ reset-names = "rst";
+
+ clock-names = "core_clk",
+ "bus_aggr_clk",
+ "iface_clk",
+ "core_clk_unipro",
+ "ref_clk",
+ "tx_lane0_sync_clk",
+ "rx_lane0_sync_clk",
+ "ice_core_clk";
+ clocks = <&gcc GCC_UFS_PHY_AXI_CLK>,
+ <&gcc GCC_SYS_NOC_UFS_PHY_AXI_CLK>,
+ <&gcc GCC_UFS_PHY_AHB_CLK>,
+ <&gcc GCC_UFS_PHY_UNIPRO_CORE_CLK>,
+ <&rpmcc RPM_SMD_XO_CLK_SRC>,
+ <&gcc GCC_UFS_PHY_TX_SYMBOL_0_CLK>,
+ <&gcc GCC_UFS_PHY_RX_SYMBOL_0_CLK>,
+ <&gcc GCC_UFS_PHY_ICE_CORE_CLK>;
+ freq-table-hz = <50000000 240000000>,
+ <0 0>,
+ <0 0>,
+ <37500000 150000000>,
+ <0 0>,
+ <0 0>,
+ <0 0>,
+ <75000000 300000000>;
+
+ non-removable;
+ status = "disabled";
+ };
+
+ ufs_mem_phy: phy@4807000 {
+ compatible = "qcom,sm6115-qmp-ufs-phy";
+ reg = <0x04807000 0x1c4>;
+
+ power-domains = <&gcc UFS_PHY_GDSC>;
+
+ clock-names = "ref", "ref_aux";
+ clocks = <&gcc GCC_UFS_MEM_CLKREF_CLK>,
+ <&gcc GCC_UFS_PHY_PHY_AUX_CLK>;
+
+ resets = <&ufs_mem_hc 0>;
+ reset-names = "ufsphy";
+ status = "disabled";
+
+ ufs_mem_phy_lanes: lanes@4807400 {
+ reg = <0x4807400 0x098>,
+ <0x4807600 0x130>,
+ <0x4807c00 0x16c>;
+ #phy-cells = <0>;
+ };
+
+ #address-cells = <1>;
+ #size-cells = <1>;
+ ranges;
+ };
+
usb3: usb@4ef8800 {
compatible = "qcom,sm6125-dwc3", "qcom,dwc3";
reg = <0x04ef8800 0x400>;
--
2.38.1
Document the Xiaomi Mi A3 (xiaomi-laurel-sprout) smartphone which is
based on the Snapdragon 665 SoC.
Signed-off-by: Lux Aliaga <[email protected]>
---
Documentation/devicetree/bindings/arm/qcom.yaml | 1 +
1 file changed, 1 insertion(+)
diff --git a/Documentation/devicetree/bindings/arm/qcom.yaml b/Documentation/devicetree/bindings/arm/qcom.yaml
index 27063a045bd0..4923dafb5d7a 100644
--- a/Documentation/devicetree/bindings/arm/qcom.yaml
+++ b/Documentation/devicetree/bindings/arm/qcom.yaml
@@ -793,6 +793,7 @@ properties:
- items:
- enum:
- sony,pdx201
+ - xiaomi,laurel-sprout
- const: qcom,sm6125
- items:
--
2.38.1
On 15.12.2022 19:24, Lux Aliaga wrote:
> Adds support for the Xiaomi Mi A3 (xiaomi-laurel-sprout). Here's a
> summary on what's working.
>
> - dmesg output to bootloader preconfigured display
> - USB
> - UFS
> - SMD RPM regulators
>
> Signed-off-by: Lux Aliaga <[email protected]>
> ---
You don't seem to have addressed the review comments from
v2 on this patch.
Konrad
> arch/arm64/boot/dts/qcom/Makefile | 1 +
> .../dts/qcom/sm6125-xiaomi-laurel-sprout.dts | 254 ++++++++++++++++++
> 2 files changed, 255 insertions(+)
> create mode 100644 arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel-sprout.dts
>
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index 3e79496292e7..2b2a0170db14 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -157,6 +157,7 @@ dtb-$(CONFIG_ARCH_QCOM) += sdm850-lenovo-yoga-c630.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sdm850-samsung-w737.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sm4250-oneplus-billie2.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sm6125-sony-xperia-seine-pdx201.dtb
> +dtb-$(CONFIG_ARCH_QCOM) += sm6125-xiaomi-laurel-sprout.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sm6350-sony-xperia-lena-pdx213.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sm6375-sony-xperia-murray-pdx225.dtb
> dtb-$(CONFIG_ARCH_QCOM) += sm7225-fairphone-fp4.dtb
> diff --git a/arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel-sprout.dts b/arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel-sprout.dts
> new file mode 100644
> index 000000000000..acdfaa83b152
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/sm6125-xiaomi-laurel-sprout.dts
> @@ -0,0 +1,254 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Copyright (c) 2022, Lux Aliaga <[email protected]>
> + */
> +
> +/dts-v1/;
> +
> +#include <dt-bindings/gpio/gpio.h>
> +#include <dt-bindings/input/input.h>
> +#include <dt-bindings/input/gpio-keys.h>
> +#include "sm6125.dtsi"
> +
> +/ {
> + /* required for bootloader to select correct board */
> + qcom,msm-id = <394 0>; /* sm6125 v0 */
> + qcom,board-id = <11 0>;
> +
> + model = "Xiaomi Mi A3";
> + compatible = "xiaomi,laurel-sprout", "qcom,sm6125";
> + chassis-type = "handset";
> +
> + chosen {
> + #address-cells = <2>;
> + #size-cells = <2>;
> + ranges;
> +
> + framebuffer0: framebuffer@5c000000 {
> + compatible = "simple-framebuffer";
> + reg = <0 0x5c000000 0 (1560 * 720 * 4)>;
> + width = <720>;
> + height = <1560>;
> + stride = <(720 * 4)>;
> + format = "a8r8g8b8";
> + };
> + };
> +
> + extcon_usb: usb-id {
> + compatible = "linux,extcon-usb-gpio";
> + id-gpio = <&tlmm 102 GPIO_ACTIVE_HIGH>;
> + };
> +
> + reserved-memory {
> + #address-cells = <2>;
> + #size-cells = <2>;
> +
> + debug_mem: memory@ffb00000 {
> + reg = <0x0 0xffb00000 0x0 0xc0000>;
> + no-map;
> + };
> +
> + last_log_mem: memory@ffbc0000 {
> + reg = <0x0 0xffbc0000 0x0 0x80000>;
> + no-map;
> + };
> +
> + pstore_mem: ramoops@ffc00000 {
> + compatible = "ramoops";
> + reg = <0x0 0xffc40000 0x0 0xc0000>;
> + record-size = <0x1000>;
> + console-size = <0x40000>;
> + msg-size = <0x20000 0x20000>;
> + };
> +
> + cmdline_mem: memory@ffd00000 {
> + reg = <0x0 0xffd40000 0x0 0x1000>;
> + no-map;
> + };
> + };
> +};
> +
> +
> +&hsusb_phy1 {
> + status = "okay";
> +};
> +
> +&rpm_requests {
> + regulators-0 {
> + compatible = "qcom,rpm-pm6125-regulators";
> +
> + vreg_s6a: s6 {
> + regulator-min-microvolt = <936000>;
> + regulator-max-microvolt = <1422000>;
> + };
> +
> + vreg_l1a: l1 {
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1256000>;
> + };
> +
> + vreg_l2a: l2 {
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1056000>;
> + };
> +
> + vreg_l3a: l3 {
> + regulator-min-microvolt = <1000000>;
> + regulator-max-microvolt = <1064000>;
> + };
> +
> + vreg_l4a: l4 {
> + regulator-min-microvolt = <872000>;
> + regulator-max-microvolt = <976000>;
> + };
> +
> + vreg_l5a: l5 {
> + regulator-min-microvolt = <1648000>;
> + regulator-max-microvolt = <3104000>;
> + };
> +
> + vreg_l6a: l6 {
> + regulator-min-microvolt = <576000>;
> + regulator-max-microvolt = <656000>;
> + };
> +
> + vreg_l7a: l7 {
> + regulator-min-microvolt = <872000>;
> + regulator-max-microvolt = <976000>;
> + };
> +
> + vreg_l8a: l8 {
> + regulator-min-microvolt = <400000>;
> + regulator-max-microvolt = <728000>;
> + };
> +
> + vreg_l9a: l9 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1896000>;
> + };
> +
> + vreg_l10a: l10 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1896000>;
> + };
> +
> + vreg_l11a: l11 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1952000>;
> + };
> +
> + vreg_l12a: l12 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1996000>;
> + };
> +
> + vreg_l13a: l13 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1832000>;
> + };
> +
> + vreg_l14a: l14 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1904000>;
> + };
> +
> + vreg_l15a: l15 {
> + regulator-min-microvolt = <3104000>;
> + regulator-max-microvolt = <3232000>;
> + };
> +
> + vreg_l16a: l16 {
> + regulator-min-microvolt = <1800000>;
> + regulator-max-microvolt = <1904000>;
> + };
> +
> + vreg_l17a: l17 {
> + regulator-min-microvolt = <1248000>;
> + regulator-max-microvolt = <1304000>;
> + };
> +
> + vreg_l18a: l18 {
> + regulator-min-microvolt = <1200000>;
> + regulator-max-microvolt = <1264000>;
> + };
> +
> + vreg_l19a: l19 {
> + regulator-min-microvolt = <1648000>;
> + regulator-max-microvolt = <2952000>;
> + };
> +
> + vreg_l20a: l20 {
> + regulator-min-microvolt = <1648000>;
> + regulator-max-microvolt = <2952000>;
> + };
> +
> + vreg_l21a: l21 {
> + regulator-min-microvolt = <2600000>;
> + regulator-max-microvolt = <2856000>;
> + };
> +
> + vreg_l22a: l22 {
> + regulator-min-microvolt = <2944000>;
> + regulator-max-microvolt = <3304000>;
> + };
> +
> + vreg_l23a: l23 {
> + regulator-min-microvolt = <3000000>;
> + regulator-max-microvolt = <3400000>;
> + };
> +
> + vreg_l24a: l24 {
> + regulator-min-microvolt = <2944000>;
> + regulator-max-microvolt = <3304000>;
> + };
> + };
> +};
> +
> +&sdc2_off_state {
> + sd-cd-pins {
> + pins = "gpio98";
> + function = "gpio";
> + drive-strength = <2>;
> + bias-disable;
> + };
> +};
> +
> +&sdc2_on_state {
> + sd-cd-pins {
> + pins = "gpio98";
> + function = "gpio";
> + drive-strength = <2>;
> + bias-pull-up;
> + };
> +};
> +
> +&tlmm {
> + gpio-reserved-ranges = <22 2>, <28 6>;
> +};
> +
> +&ufs_mem_hc {
> + vcc-supply = <&vreg_l24a>;
> + vccq2-supply = <&vreg_l11a>;
> + vcc-max-microamp = <600000>;
> + vccq2-max-microamp = <600000>;
> +
> + status = "okay";
> +};
> +
> +&ufs_mem_phy {
> + vdda-phy-supply = <&vreg_l4a>;
> + vdda-pll-supply = <&vreg_l10a>;
> + vdda-phy-max-microamp = <51400>;
> + vdda-pll-max-microamp = <14200>;
> + vddp-ref-clk-supply = <&vreg_l18a>;
> +
> + status = "okay";
> +};
> +
> +&usb3 {
> + status = "okay";
> +};
> +
> +&usb3_dwc3 {
> + extcon = <&extcon_usb>;
> +};